aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/Makefile
Commit message (Collapse)AuthorAge
* watchdog: new driver for VIA chipsetsMarc Vertes2012-01-06
| | | | | | | | | | | New driver for the hardware watchdog timer on VIA chipsets. This driver uses the new watchdog framework. PnP must be enabled in BIOS to get full control of watchdog registers. The timer code has been added by Wim Van Sebroeck. Tested on a Artigo A1100, VX855 chipset. Signed-off-by: Marc Vertes <marc.vertes@sigfox.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: adx_wdt.c: remove driverWim Van Sebroeck2011-11-15
| | | | | | | | | Remove the driver (that was added in v2.6.32) since the architecture has never been merged into mainline. Reported-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: WatchDog Timer Driver Core - Add basic frameworkWim Van Sebroeck2011-07-28
| | | | | | | | | | | | | | | | | | | | The WatchDog Timer Driver Core is a framework that contains the common code for all watchdog-driver's. It also introduces a watchdog device structure and the operations that go with it. This is the introduction of this framework. This part supports the minimal watchdog userspace API (or with other words: the functionality to use /dev/watchdog's open, release and write functionality as defined in the simplest watchdog API). Extra functionality will follow in the next set of patches. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
* watchdog: Add Xilinx watchdog timer driverAlejandro Cabrera2011-07-26
| | | | | | | | | | | | Watchdog timer device driver for Xilinx xps_timebase_wdt compatible ip cores. It takes watchdog timer configuration from device tree and it needs that its parent has defined the property "clock-frecuency". It is compatible with watchdog timer kernel API, so user apps like watchdogd may talk with it. Signed-off-by: Alejandro Cabrera <aldaya@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: add support for the Synopsys DesignWare WDTJamie Iles2011-07-22
| | | | | | | | | | | The Synopsys DesignWare watchdog is found in several ARM based systems and provides a choice of 16 timeout periods depending on the clock input. The watchdog cannot be disabled once started. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* MIPS: Lantiq: Add watchdog supportJohn Crispin2011-05-19
| | | | | | | | | | | | This patch adds the driver for the watchdog found inside the Lantiq SoC family. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Fix common misspellingsLucas De Marchi2011-03-31
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* watchdog: Xen watchdog driverJan Beulich2011-03-15
| | | | | | | | | | | | While the hypervisor change adding SCHEDOP_watchdog support included a daemon to make use of the new functionality, having a kernel driver for /dev/watchdog so that user space code doesn't need to distinguish non-Xen and Xen seems to be preferable. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms.Donald Johnson2011-03-15
| | | | | | | | | | | | | | | | | | | | | This submission includes: - Fix to intel_scu_write() to start watchdog timer the on the first write, and refresh on subsequent writes. This enables Open, write, write, ... usage model. - Moves boot parameter checks from intel_scu_open() to intel_scu_watchdog_init(), so driver init will fail if these parameters are out of bounds. - Adds check for whether process waiting in wait_event_interruptible() received a signal while it was waiting. - Other small error handling changes. Removed the read() method for now as that wass a non-standard behaviour. Signed-off-by: Donald Johnson <donald.k.johnson@intel.com> Signed-off-by: Shuduo Sang <shuduo.sang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: add JZ4740 watchdog driverPaul Cercueil2011-03-15
| | | | | | | | | Adds support for the hardware watchdog found in Ingenic's jz4740 System-on-Chip. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* m68knommu: Rename m548x_wdt.c to m54xx_wdt.cPhilippe De Muyter2011-02-08
| | | | | | | All m548x files were renamed to m54xx, except m548x_wdt.c. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* watchdog: Add MCF548x watchdog driver.Philippe De Muyter2011-01-12
| | | | | | | | Add watchdog driver for MCF548x. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: add driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos2011-01-12
| | | | | | | | | | This patch adds a driver for the built-in hardware watchdog device of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Add TCO support for nVidia chipsetsMike Waychison2011-01-12
| | | | | | | | | | | This driver adds support for /dev/watchdog for boards using either the MCP51 or MCP55 chipsets. These are also known as the nForce 430 and nForce 550. This driver is likely to work on other chipsets as well, though those are the only two that have been tested. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Add support for sp5100 chipset TCOPriyanka Gupta2011-01-12
| | | | | | | | | | | This driver adds /dev/watchdog support for the AMD sp5100 aka SB7x0 chipsets. It follows the same conventions found in other /dev/watchdog drivers. Signed-off-by: Priyanka Gupta <priyankag@google.com> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: add support for Broadcom BCM63xx built-in watchdogFlorian Fainelli2010-10-28
| | | | | | | | | | This patch adds support for the Broadcom BCM63xx SoC built-in watchdog, it uses one of the BCM63xx hardware timer id. Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: Adding support for ARM Primecell SP805 WatchdogViresh KUMAR2010-08-08
| | | | | | | | | Technical Reference Manual can be found at: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0270b/DDI0270.pdf Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FGGiel van Schijndel2010-08-08
| | | | | | | | | Add a new watchdog driver for the Fintek F71808E and F71882FG Super I/O controllers. Signed-off-by: Giel van Schijndel <me@mortis.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* WATCHDOG: Add watchdog driver for OCTEON SOCsDavid Daney2010-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | The OCTEON is a MIPS64 based SOC family with an on chip watchdog unit. The driver is split into two source files one for the C code and one for assembly. Assembly is needed to handle the NMI and then print the machine state before the reboot is triggered. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Marc Zyngier <maz@misterjones.org> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Sam Ravnborg <sam@ravnborg.org> To: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org, Patchwork: https://patchwork.linux-mips.org/patch/1503/ Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/watchdog/octeon-wdt-main.c create mode 100644 drivers/watchdog/octeon-wdt-nmi.S
* watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) ↵Wolfram Sang2010-05-25
| | | | | | | | | | | | | processors. This is the driver for the hardware watchdog on the Freescale IMX2 and later processors. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] support for max63xx watchdog timer chipsMarc Zyngier2010-03-06
| | | | | | | | | | | This driver adds support for the max63{69,70,71,72,73,74} family of watchdog timer chips. It has been tested on an Arcom Zeus (max6369). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] ep93xx: implemented watchdog timer driver for TS-72xx SBCsMika Westerberg2010-03-06
| | | | | | | | | | Technologic Systems TS-72xx SBCs have external glue logic CPLD which includes watchdog timer. This driver implements kernel support for that. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* MIPS: eXcite: Remove platform.Ralf Baechle2009-12-16
| | | | | | | | | | | | | The platform has never been fully merged Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Koeller <thomas.koeller@baslerweb.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be>
* mpc52xx/wdt: remove obsolete old WDT implementationAlbrecht Dreß2009-12-08
| | | | | | | | Remove the old WDT implementation. Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* [WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.Thierry Reding2009-09-25
| | | | | | | | | | This patch adds support for the watchdog timer on Avionic Design Xanthos boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Add support for WM831x watchdogMark Brown2009-09-18
| | | | | | | | | | | | The WM831x series of devices provide a watchdog with configurable behaviour on timer expiry. Currently this driver support refreshes via a register or GPIO line and autonomous refreshes from a hardware source (eg, a clock). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Add watchdog driver for NUC900Wan ZongShun2009-09-18
| | | | | | | | Add watchdog device driver for the Nuvoton NUC900 series SoCs. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] add SBC-FITPC2 watchdog driverDenis Turischev2009-09-18
| | | | | | | | | | Add support for watchdog found on SBC-FITPC2 board. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* [WATCHDOG] add bcm47xx watchdog drivermatthieu castet2009-06-20
| | | | | | | | | | | | | | | | | | | | This add watchdog driver for broadcom 47xx device. It uses the ssb subsytem to access embeded watchdog device. Because the watchdog timeout is very short (about 2s), a soft timer is used to increase the watchdog period. Note : A patch for exporting the ssb_watchdog_timer_set will be submitted on next linux-mips merge. Without this patch it can't be build as a module. Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Tested-by: Florian Fainelli <florian@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* [WATCHDOG] Freescale STMP: watchdog driverdmitry pervushin2009-06-20
| | | | | | | | | Add watchdog timer support for Freescale STMP3xxx boards Signed-off-by: Vitaly Wool <vital@embeddedalley.com> Signed-off-by: Dmitry Pervushin <dpervushin@embeddedalley.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] twl4030 watchdog driverTimo Kokkonen2009-06-20
| | | | | | | | | Implementation of twl4030 watchdog driver. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] U300 COH 901 327 watchdog driverLinus Walleij2009-06-20
| | | | | | | | | This patch adds support for the U300 COH 901 327 watchdog for the U300 platform recently added to RMK:s ARM tree. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Add pnx833x_wdtDaniel Laird2009-06-20
| | | | | | | | Add support for PNX833x watchdog timer. Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdtNicolas Pitre2009-06-08
| | | | | | | | | The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [WATCHDOG] remove ARM26 sectionsPaulius Zaleckas2009-04-08
| | | | | | | | | | Removes ARM26 sections from Kconfig and Makefile, because ARM26 is long gone. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Pika Warp appliance watchdog timerSean MacLennan2009-01-12
| | | | | | | | The FPGA based watchdog timer used by the Pika Warp appliance. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timerMartyn Welch2009-01-12
| | | | | | | | | | | | | | | | | | GE Fanuc SBC610 Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310, SBC610 and PPC9A Single Board Computers. This patch adds support for the watchdog timer found in one of the devices FPGAs. There are two identical watchdog timers at different offsets in the above mentioned boards, this driver is capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] Add support for the WM8350 watchdogMark Brown2008-12-31
| | | | | | | | | | | | | | | This driver implements support for the watchdog functionality provided by the Wolfson Microelectronics WM8350, a multi-function audio and power management subsystem intended for use in embedded systems. It is based on a driver originally written by Graeme Gregory, though it has been extensively modified since then. Use of a GPIO to kick the watchdog is not yet supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* [WATCHDOG] Add SMSC SCH311x Watchdog Timer.Wim Van Sebroeck2008-12-31
| | | | | | | | | Add a watchdog driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset. Tested-by: Marco Chiappero <marco@absence.it> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2008-10-12
|\ | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: add spinlocking [WATCHDOG] Orion: add hardware watchdog support [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c [WATCHDOG] omap_wdt.c: another ioremap() fix [WATCHDOG] omap_wdt.c: sync linux-omap changes [WATCHDOG] Add AT91SAM9X watchdog [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
| * [WATCHDOG] Orion: add hardware watchdog supportSylver Bruneau2008-10-10
| | | | | | | | | | | | | | | | | | | | This patch allows the use of the hardware watchdog in the Marvell Orion series of ARM SoCs. Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] Add AT91SAM9X watchdogRenaud CERRATO2008-10-10
| | | | | | | | | | | | | | | | Add a driver for the watchdog timer embedded into AT91SAM9X chips. Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] Add driver for winbond w83697ug/uf watchdog featureFlemming Frandsen2008-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip, found on MSI Fuzzy CX700 boards. The method used is taken directly from the winbond datasheet and surprisingly it differs slightly from all the other winbond watchdogs. So far it has only been tested on the CX700 board that I have, but it seems to work nicely. Signed-off-by: Flemming Frandsen <ff@nrvissing.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/KOliver Schuster2008-10-10
| | | | | | | | | | | | | | | | | | Add it87xx watchdog driver IT8716 IT8718 IT8726 IT8712-J IT8712-K Signed-off-by: Oliver Schuster <olivers137@aol.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge branch 'master' of ↵David S. Miller2008-09-16
|\| | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Conflicts: arch/sparc64/kernel/pci_psycho.c
| * [WATCHDOG] Add support for the IDT RC32434 watchdogFlorian Fainelli2008-08-26
| | | | | | | | | | | | | | | | Add driver for the IDT RC32434 SoC built-in watchdog. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATCHDOG] Add support for the built-int RDC R-321x SoC watchdogFlorian Fainelli2008-08-26
| | | | | | | | | | | | | | | | This patch adds support for the built-in RDC R-321x SoC watchdog. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * [WATHDOG] delete unused driver mpc8xx_wdt.cJochen Friedrich2008-08-26
| | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog driver mpc8xx_wdt.c was a device interface to arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware is supported by mpc8xxx_wdt.c. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | cpwatchdog: Move to drivers/watchdog/cpwd.cDavid S. Miller2008-08-29
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | riowatchdog: Move under drivers/watchdogDavid S. Miller2008-08-29
|/ | | | | | The config stuff was already in drivers/watchdog/Kconfig Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 17:15:13 -0500