aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/video
Commit message (Collapse)AuthorAge
* drivers/video/efifb.c: support framebuffer for NVIDIA 9400M in MacBook Pro 5,1Thomas Gerlach2010-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description of patch: --------------------- This is a patch for the EFI framebuffer driver to enable the framebuffer of the NVIDIA 9400M as found in MacBook Pro (MBP) 5,1 and up. The framebuffer of the NVIDIA graphic cards are located at the following addresses in memory: 9400M: 0xC0010000 9600M GT: 0xB0030000 The patch delivered right here only provides the memory location of the framebuffer of the 9400M device. The 9600M GT is not covered. It is assumed that the 9400M is used when powered up the MBP. The information which device is currently powered and in use is stored in the 64 bytes large EFI variable "gpu-power-prefs". More specifically, byte 0x3B indicates whether 9600M GT (0x00) or 9400M (0x01) is online. The PCI bus IDs are the following: 9400M: PCI 03:00:00 9600M GT: PCI 02:00:00 The EFI variables can be easily read-out and manipulated with "rEFIt", an MBP specific bootloader tool. For more information on how handle rEFIt and EFI variables please consult "http://refit.sourceforge.net" and "http://ubuntuforums.org/archive/index.php/t-1076879.html". IMPORTANT NOTE: The information on how to activate the 9400M device given at "ubuntuforums.org" is not correct, since it states gpu-power-prefs[0x3B] = 0x00 -> 9400M (PCI 02:00:00) gpu-power-prefs[0x3B] = 0x01 -> 9600M GT (PCI 03:00:00) Actually, the assignment of the values and the PCI bus IDs are swapped. Suggestions: ------------ To cover framebuffers of both 9400M and 9600M GT, I would suggest to implement a conditional on "gpu-power-prefs". Depending on the value of byte 0x3B, the according framebuffer is selected. However, this requires kernel access to the EFI variables. [akpm@linux-foundation.org: rename optname, per Peter Jones] Signed-off-by: Thomas Gerlach <t.m.gerlach@freenet.de> Acked-by: Peter Jones <pjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mb862xxfb: update Valentin's email addressAlexander Shishkin2010-04-07
| | | | | | | | | | | Since Valentin's email address @siemens.com is no longer valid, it's time to change it to the one that actually works so that I don't have to manually forward patches against mb862xx to him every time. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Acked-by: Valentin Sitdikov <v.sitdikov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mb862xxfb: fix acceleration module licenseRandy Dunlap2010-04-07
| | | | | | | | | | | | | | | | mb862xxfb_accel built as a separate module, but it does not have a MODULE_LICENSE, so it taints the kernel. Add a MODULE_LICENSE to it (same as mb862xxfb license). mb862xxfb_accel: module license 'unspecified' taints kernel. Or should mb862xxfb_accel be built into the mb862xxfb binary file instead? Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Alexander Shishkin <virtuoso@slind.org> Cc: Valentin Sitdikov <v.sitdikov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* device_attributes: add sysfs_attr_init() for dynamic attributesWolfram Sang2010-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Made necessary by 6992f5334995af474c2b58d010d08bc597f0f2fe ("sysfs: Use one lockdep class per sysfs attribute"). Prevents further "key xxx not in .data" bug-reports. Although some attributes could probably be converted to static ones, this is left for people having hardware to test. Found by this semantic patch: @ init @ type T; identifier A; @@ T { ... struct device_attribute A; ... }; @ main extends init @ expression E; statement S; identifier err; T *name; @@ ... when != sysfs_attr_init(&name->A.attr); ( + sysfs_attr_init(&name->A.attr); if (device_create_file(E, &name->A)) S | + sysfs_attr_init(&name->A.attr); err = device_create_file(E, &name->A); ) While reviewing, I put the initialization to apropriate places. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <gregkh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Mike Isely <isely@pobox.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vesafb: use platform_driver_probe() instead of platform_driver_register()Jan Beulich2010-04-07
| | | | | | | | | | | | | | | | | Commit c2e13037e6794bd0d9de3f9ecabf5615f15c160b ("platform-drivers: move probe to .devinit.text in drivers/video") introduced a huge amount of section mismatch warnings in vesafb code. Rather than converting all of the annotations, do the obvious and revert the __init -> __devinit change, and use the recommended (in that patch) alternative to calling platform_driver_register(): vesafb depends on information obtained from by kernel at boot time, cannot be a module, and no post-boot devices can ever show up. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Greg KH <greg@kroah.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'master' into export-slabhTejun Heo2010-04-04
|\
| * sunxvr500: Ignore secondary output PCI devices.David S. Miller2010-04-04
| | | | | | | | | | | | | | | | | | | | | | These just represent the secondary and further heads attached to the card, and they have different sets of PCI bar registers to map. So don't try to drive them in the main driver. Reported-by: Frans van Berckel <fberckel@xs4all.nl> Tested-by: Frans van Berckel <fberckel@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2010-03-24
|\ | | | | | | | | | | | | * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: panel-generic: re-implement mode changing OMAP: DSS2: initialize dss clk sources properly OMAP: DSS2: VRAM: Fix early_param for vram
| * OMAP: DSS2: panel-generic: re-implement mode changingTomi Valkeinen2010-03-15
| | | | | | | | | | | | | | Mode changing code was left out with the DSS driver remodeling. Add the code back. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: initialize dss clk sources properlyTomi Valkeinen2010-03-15
| | | | | | | | | | | | | | Clk sources were not initialized, leading to kernel crash, or possibly to strange behaviour if DSI was compiled in. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: VRAM: Fix early_param for vramThomas Weber2010-03-10
| | | | | | | | | | | | | | | | | | | | In commit 2b0d8c251b8876d530a6bf671eb5425838fa698a the __early_param is replaced with the generic early_param. This patch fixes the parameter passing for the vram. Signed-off-by: Thomas Weber <weber@corscience.de> [tomi.valkeinen@nokia.com: changed the commit prefix] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-03-24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTON [ARM] Kirkwood: WPS button keycode mapping pxa168fb: fix incorrect resource calculation [ARM] pxa/raumfeld: fix button name [ARM] pxa/raumfeld: remove duplicated #include [ARM] locomo: fix unpaired spin_lock_irqsave [ARM] locomo: fix SPI register offset [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms [ARM] pxa: remove spi cs gpio direction to avoid clash with driver [ARM] mmp: fix for variables in uncompress.h being discarded [ARM] pxa: fix for variables in uncompress.h being discarded ARM: Update mach-types ARM: Fix IXP23xx build error in mach/memory.h
| * | pxa168fb: fix incorrect resource calculationDan Carpenter2010-03-22
| | | | | | | | | | | | | | | | | | | | | | | | The size calculation is not correct. It should be end - start + 1. Use resource_size() to caculate it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* | | lxfb: set the H- and V-SYNC polarity of the flatpanel outputMichael Grzeschik2010-03-24
|/ / | | | | | | | | | | | | | | | | | | | | Fixup for the flatpanel output. The geode_modedb attribute flags are used to set the SYNC polarity of the flatpanel. Without this patch our flatpanel registers stayed unconfigured, so we just saw garbage output. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-03-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits) ARM: Fix RiscPC decompressor build errors ARM: Fix sorting of platform group config options and includes ARM: 5991/1: Fix regression in restore_user_regs macro ARM: 5989/1: ARM: KGDB: add support for SMP platforms ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush ARM: Add final piece to fix XIP decompressor in read-only memory video: enable sh_mobile_lcdc on SH-Mobile ARM ARM: mach-shmobile: ap4evb SDHI0 platform data V2 ARM: mach-shmobile: sh7372 SDHI vector merge ARM: mach-shmobile: sh7377 SDHI vector merge ARM: mach-shmobile: sh7367 SDHI vector merge ARM: mach-shmobile: G4EVM KEYSC platform data mtd: enable sh_flctl on SH-Mobile ARM ARM: mach-shmobile: G3EVM FLCTL platform data ARM: mach-shmobile: G3EVM KEYSC platform data Video: ARM CLCD: Better fix for swapped IENB and CNTL registers ARM: Add L2 cache handling to smp boot support ARM: 5960/1: ARM: perf-events: fix v7 event selection mask ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds ...
| * \ Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6Russell King2010-03-15
| |\ \
| | * | video: enable sh_mobile_lcdc on SH-Mobile ARMMagnus Damm2010-03-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the sh_mobile_lcdc driver on SH-Mobile ARM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | Video: ARM CLCD: Better fix for swapped IENB and CNTL registersRussell King2010-03-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds2010-03-18
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: panasonic-laptop - Fix incomplete registration failure handling backlight: msi-laptop, msi-wmi: fix incomplete registration failure handling backlight: blackfin - Fix missing registration failure handling backlight: classmate-laptop - Fix missing registration failure handling backlight: mbp_nvidia_bl - add five more MacBook variants backlight: Allow properties to be passed at registration backlight: Add backlight_device parameter to check_fb video: backlight/progear, fix pci device refcounting backlight: l4f00242t03: Fix module licence absence. backlight: Revert some const qualifiers backlight: Add Epson L4F00242T03 LCD driver
| * | | | backlight: blackfin - Fix missing registration failure handlingBruno Prémont2010-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check newly registered backlight_device for error and properly return error to parent Mark struct backlight_ops as const. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Mike Frysinger <vapier@gentoo.org> (constify struct backlight_ops) Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * | | | backlight: mbp_nvidia_bl - add five more MacBook variantsEvan McClain2010-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the MacBook 1,1 2,1 3,1 4,1 and 4,2 to the DMI tables. Signed-off-by: Evan McClain <evan.mcclain@gatech.edu> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * | | | backlight: Allow properties to be passed at registrationMatthew Garrett2010-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Values such as max_brightness should be set before backlights are registered, but the current API doesn't allow that. Add a parameter to backlight_device_register and update drivers to ensure that they set this correctly. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * | | | backlight: Add backlight_device parameter to check_fbBruno Prémont2010-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | check_fb from backlight_ops lacks a reference to the backlight_device that's being referred to. Add this parameter so a backlight_device can be mapped to a single framebuffer, especially if the same driver handles multiple devices on a single system. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * | | | video: backlight/progear, fix pci device refcountingJiri Slaby2010-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stanse found an ommitted pci_dev_puts on error path in progearbl_probe. pmu_dev and sb_dev are gotten, but never put when backlight_device_register fails. So unify fail paths and put the devs when the failure occurs. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * | | | backlight: l4f00242t03: Fix module licence absence.Alberto Panizzo2010-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * | | | backlight: Add Epson L4F00242T03 LCD driverAlberto Panizzo2010-03-16
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Epson LCD L4F00242T03 is mounted on the Freescale i.MX31 PDK board. Based upon Marek Vasut work in l4f00242t03.c, this driver provides basic init and power on/off functionality for this device through the sysfs lcd interface. Unfortunately Datasheet for this device are not available and all the control sequences sent to the display were copied from the freescale driver that in the i.MX31 Linux BSP. As in the i.MX31PDK board the core and io suppliers are voltage regulators, that functionality is embedded here, but not strict. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2010-03-18
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunxvr1000: Add missing FB=y depenency. MAINTAINERS: Add entry for sparc serial drivers. drivers/serial/sunsab.c: adjust the constant used to initialize the interrupt_mask0 fields
| * | | sunxvr1000: Add missing FB=y depenency.David S. Miller2010-03-16
| | | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2010-03-14
|\| | | | |/ / |/| | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Add very basic XVR-1000 framebuffer driver. qlogicpti: Remove slash in QlogicPTI irq name
| * | sparc64: Add very basic XVR-1000 framebuffer driver.David S. Miller2010-03-13
| | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Frans van Berckel <fberckel@xs4all.nl>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2010-03-12
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
| * \ \ Merge branch 'for-next' into for-linusJiri Kosina2010-03-08
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| | * | | tree-wide: Assorted spelling fixesDaniel Mack2010-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | tree-wide: s/widht/width/g typo in commentsDaniel Mack2010-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | Fix spelling of 'platform' in comments and docStefan Weil2010-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace platfrom -> platform. This is a frequent spelling bug. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | | Fix misspelling of "should" and "shouldn't" in comments.Adam Buchbinder2010-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some comments misspell "should" or "shouldn't"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-03-12
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
| * | | | | Merge branch 'origin' into devel-stableRussell King2010-03-08
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
| * | | | | Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King2010-03-02
| |\ \ \ \ \ | | |_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | devel-stable Conflicts: arch/arm/Makefile
| | * | | | imxfb: add support for i.MX25Baruch Siach2010-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit also introduces the HAVE_FB_IMX config that is to be selected from the MX25 platform config. Once this commit gets merged, the two other i.MX archs, ARCH_MX1 and ARCH_MX2, should follow this one. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | | | | fbdev: bfin-lq035q1-fb: remove duplicated #includeHuang Weiyi2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated #include('s) in drivers/video/bfin-lq035q1-fb.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | video: fix first line of kernel-doc for a few functionsBen Hutchings2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | obsolete config in kernel source: LWMON5Christoph Egger2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was some conditionalizing for the LWMON5 boards in kernel source. However infrastructure for enabling this isn't here so probably the special case code can go as well. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Acked-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | drivers/video/via: fix continuation line formatsJoe Perches2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | String constants that are continued on subsequent lines with \ will cause spurious whitespace in the resulting output. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | NUC900 LCD Controller DriverWang Qiang2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An LCD controller driver for nuc900s. The Linux LOGO is just fine and the FB-Test application was ok, too. Signed-off-by: Wang Qiang <rurality.linux@gmail.com> Cc: Wang Zongshun <mcuos.com@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | fbdev: remove obsolete CONFIG_FB_SOFT_CURSORChristoph Egger2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The config Option FB_SOFT_BUFFER was removed in c465e05a03209651078b95686158648fd7ed84c5 ("fbcon/fbdev: Move softcursor out of fbdev to fbcon"). While moving to fbcon this single driver has it left as a select in KConfig / #ifdef in source. This last occurence is removed here so the option is really gone Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | broadsheetfb: support storing waveformJaya Kumar2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | broadsheetfb: add MMIO hooksJaya Kumar2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow boards with GP-MMIO controllers to provide hooks to broadsheetfb in order to offload cmd/data writes and data reads instead of relying only on host based GPIO wiggling. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | viafb: support color depth 15 and 30Florian Tobias Schandinat2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the color depth 15 on IGA1 and 30 on IGA1 and IGA2. To allow the usage of those the driver now refuses color depth that are totally off and otherwise the selection in viafb_check_var is used. Therefore the first call to this for the first framebuffer was delayed a bit. It only enables the new formats if they are requested exactly (viafb_bpp=15|30). As this is a new feature, no regressions are expected. The color depth 15 was successfully tested. Didn't get anything usable for 30 but that might be the programs fault. I would like to get some feedback whether it works as expected or not if somebody knows a program/configuration where it should. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>