aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/video/intelfb/intelfbdrv.c
Commit message (Collapse)AuthorAge
* intelfb: fix setting of active pipe with LVDS displaysKrzysztof Helt2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The intelfb driver sets color map depending on currently active pipe. However, if an LVDS display is attached (like in laptop) the active pipe variable is never set. The default value is PIPE_A and can be wrong. Set up the pipe variable during driver initialization after hardware state was read. Also, the detection of the active display (and hence the pipe) is wrong. The pipes are assigned to so called planes. Both pipes are always enabled on my laptop but only one plane is enabled (the plane A for the CRT or the plane B for the LVDS). Change active pipe detection code to take into account a status of the plane assigned to each pipe. The problem is visible in the 8 bpp mode if colors above 15 are used. The first 16 color entries are displayed correctly. The graphics chip description is here (G45 vol. 3): http://intellinuxgraphics.org/documentation.html Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13285 Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Michal Suchanek <hramrach@centrum.cz> Cc: Dean Menezes <samanddeanus@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* intelfb: fix a bug when changing video timingPaul Menzel2009-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | When changing video timing dynamically via fbset the screen sporadically is rendered black. With the attached fix which disables VCO prior to timing register change the problem disappears. I had a look at the Xserver register setup code. Here the VCO is disabled in the same way [1]. This patch is taken from vga-sync-field version 0.0.11 [2][3]. [1] http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/tree/src/i830_= driver.c [2] http://lowbyte.de/vga-sync-fields/vga-sync-fields-0.0.11.tgz [3] http://easy-vdr.de/git?p=frc.git/.git;a=commit;h=dcc3b863e5a663652587619c357bd20075af6896 2587619c357bd20075af6896 Signed-off-by: Thomas Hilber <sparkie@lowbyte.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* intelfb: support i854Stefan Husemann2009-04-13
| | | | | | | | | | | | | | | | Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Stefan Husemann <shusemann@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* intelfb: fix sparse warningsHannes Eder2009-01-06
| | | | | | | | | | | | | | Fix this sparse warnings: drivers/video/intelfb/intelfbdrv.c:1497:3: warning: returning void-valued expression drivers/video/intelfb/intelfbdrv.c:1525:3: warning: returning void-valued expression drivers/video/intelfb/intelfbdrv.c:1544:3: warning: returning void-valued expression drivers/video/intelfb/intelfbdrv.c:1558:3: warning: returning void-valued expression Signed-off-by: Hannes Eder <hannes@hanneseder.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* intelfb: support 945GME (as used in ASUS Eee 901)Phil Endecott2008-10-16
| | | | | | | | | | | | | | | | | | Add support for Intel's 945GME graphics chip to the intelfb driver. I have assumed that the 945GME is identical to the already-supported 945GM apart from its PCI IDs; this is based on a quick look at the X driver for these chips which seems to treat them identically. The 945GME is used in the ASUS Eee 901, and I coded this in the hope that I'd be able to use it to get a console at the native 1024x600 resolution which is not known to the BIOS. I realised too late that the intelfb driver does not support mode changing on laptops, so it won't be any use for me. Signed-off-by: Phil Endecott <spam_from_intelfb@chezphil.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: intelfb: add support for the Intel Integrated Graphics Controller ↵Maik Broemme2008-04-28
| | | | | | | | | | | | | | | | | | | | | 965G/965GM Add support for the 965G and 965GM graphic chipsets to the intelfb driver. I have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics Controller and with the attached patch the framebuffer comes up. I have tested it a bit with DirectFB to make sure it is working stable. I also have an Intel Mobile GM945 and I compared the results, the programming interface of the 9xx series from Intel is mostly the same, so I think the patch should add all the functionality which the 945GM has. Signed-off-by: Maik Broemme <mbroemme@plusserver.de> Cc: Dave Airlie <airlied@linux.ie> Cc: Antonino Daplas <adaplas@pol.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Convert files to UTF-8 and some cleanupsJan Engelhardt2007-10-19
| | | | | | | | | | | | | | | | | | * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* Remove magic macros for screen_info structure membersH. Peter Anvin2007-10-17
| | | | | | Stop using magic macros for screen_info structure members. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* Intel FB: whitespace, bracket and other clean-upsKrzysztof Halasa2007-10-16
| | | | | | | | | | Intel FB: whitespace, bracket and other clean-ups Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <sylvain.meyer@worldonline.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Video: fb, kzalloc changesJiri Slaby2007-02-12
| | | | | | | | | | Use kzalloc instead of kmalloc + memset(0). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] drivers/video/*: use kmemdup()Alexey Dobriyan2006-12-08
| | | | | | | | | | From: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'intelfb-patches' of ↵Linus Torvalds2006-09-30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6 * 'intelfb-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6: intelfbhw.c: intelfbhw_get_p1p2 defined but not used intelfb: fix mtrr_reg signedness intelfb: update doc and Kconfig (supported devices) intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support
| * intelfb: add preliminary i2c supportDennis Munsie2006-07-03
| | | | | | | | | | | | Adds code to unregister the I2C buses in the cleanup function. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
| * intelfb: add preliminary i2c supportDennis Munsie2006-07-03
| | | | | | | | | | | | | | [06/07] intelfb: adds intelfb_i2c.c which contains the infrastructure needed to enumerate the i2c busses on the intelfb. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
| * intelfb: add vsync interrupt supportEric Hustvedt2006-07-03
| | | | | | | | | | | | | | | | [05/05] intelfb: Honor FB_ACTIVATE_VBL for display panning Extends the intelfb_vsync struct to store panning offset. The interrupt service routine uses the stored panning offset if a pan is requested for the vsync. intelfbhw_disable_irq also pans the display if there is a pending request. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
| * intelfb: add vsync interrupt supportEric Hustvedt2006-07-03
| | | | | | | | | | | | | | | | [04/05] intelfb: implement FBIO_WAITFORVSYNC ioctl The (unofficial) FBIO_WAITFORVSYNC ioctl is implemented by sleeping on the appropriate waitqueue, as defined in my earlier patch. Currently, only display 0 (aka pipe A) is supported. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
| * intelfb: add vsync interrupt supportEric Hustvedt2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | [03/05] intelfb: Implement basic interrupt handling Functions have been added to enable and disable interrupts using the MMIO registers. Currently only pipe A vsync interrupts are enabled. A generalized vsync accounting struct is defined, with the intent that it can encapsulate per-pipe vsync related info in the future. Currently a single instance is hard-coded. The interrupt service routine currently only looks for vsync interrupts on pipe A, and increments a counter and wakes up anyone waiting on it. This implementation is heavily influenced by similar implementations in the atyfb and matroxfb drivers. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
* | [PATCH] vt: Remove VT-specific declarations and definitions from tty.hJon Smirl2006-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
|/ | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* intelfb delousingAl Viro2006-06-24
| | | | | | | | | ring_head is offset in card memory, not iomem pointer. Fixed, removed fuckloads of amazingly bogus casts somebody had sprinkled all over the place. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dave Airlie <airlied@linux.ie>
* Removed hard coded EDID buffer size.Dennis Munsie2006-06-07
| | | | | | Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: use regular modedb table instead of VESADennis Munsie2006-05-29
| | | | | | | | | intelfb driver -- use the regular modedb table instead of the VESA modedb table. Ideally, the 9xx stride patch should be applied first, since there are modes in the VESA table that won't work without that patch. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: use firmware EDID for mode databaseAntonino A. Daplas2006-05-29
| | | | | | | | | Use firmware EDID for the driver's private mode database. Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
* Revert "intelfb driver -- use the regular modedb table instead of the VESA"Dave Airlie2006-05-29
| | | | | | | This reverts 2c47430a03bbcc3c9a623a07eca5baf92c7d20c8 commit. This conflicts with a patch in -mm from Antonino reapply later. Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: int option fixEric Hustvedt2006-05-29
| | | | | | | | | | Fix integer option parsing in the intelfb driver. The macro wasn't accounting for the equal sign past the option name. As a result, the vram option always returned 0. Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com> Signed-off-by: Dennis Munsie <dmunsie@cecropia.com Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb driver -- use the regular modedb table instead of the VESADennis Munsie2006-05-27
| | | | | | | | modedb table. Ideally, the 9xx stride patch should be applied first, since there are modes in the VESA table that won't work without that patch. Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb -- uses stride alignment of 64 on the 9xx chipsets.Dennis Munsie2006-05-27
| | | | | Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: fixup pitch calculation like X doesDave Airlie2006-04-03
| | | | Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: fixup p calculationDave Airlie2006-04-02
| | | | | | | This fixes up the p calculation of p1 and p2 for the i9xx chipsets. This seems to work a lot better for lower pixel clocks.. Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: add i945GM supportDave Airlie2006-04-02
| | | | | | Untested i945GM support just add the framework. Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: fixup whitespace..Dave Airlie2006-04-02
| | | | | | repeat after me, I must not take code from X without reformatting... Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: add hw cursor support for i9xxDave Airlie2006-04-02
| | | | | | This adds hw cursor support for the i9xx chipsets. Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: add support for i945GDave Airlie2006-04-02
| | | | | | This just adds the defines and structure for i945G Signed-off-by: Dave Airlie <airlied@linux.ie>
* intelfb: add pll index to the intelfb structureDave Airlie2006-04-02
| | | | | Add the pll index into the information structure, change get_chipset to take only the info structure, use plls in correct places
* [PATCH] intelfb: Fix buffer overrunAntonino A. Daplas2006-03-11
| | | | | | | | | | | The pseudo_palette has room only for 16 entries, but intelfb_setcolreg will attempt to write more. Coverity Bug 558 Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Sanitize ->fb_ioctl prototypeChristoph Hellwig2006-01-14
| | | | | | | | | | | The ioctl and file arguments to ->fb_mmap are totally unused and there's not reason a driver should need them. Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: Fix oops when changing video modeAntonino A. Daplas2005-12-20
| | | | | | | | | | | | Reported by: janis huang (Bugzilla Bug 5747) Fix on oops in intelfb. Not sure what's happening, looks like dinfo->name pointer is invalidated after initialization. Remove intelfb_get_fix, it's not needed and move the majority of the code to the initialization routine. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: Fix freeing of nonexistent resourceAntonino A. Daplas2005-12-20
| | | | | | | Fix intelfb trying to free a non-existent resource in its error path. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering2005-11-09
| | | | | | | | | | | | | | | | | | | | | This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbconAntonino A. Daplas2005-11-07
| | | | | | | | | | | | | | | | | | | | According to Jon Smirl, filling in the field fb_cursor with soft_cursor for drivers that do not support hardware cursors is redundant. The soft_cursor function is usable by all drivers because it is just a wrapper around fb_imageblit. And because soft_cursor is an fbcon-specific hook, the file is moved to the console directory. Thus, drivers that do not support hardware cursors can leave the fb_cursor field blank. For drivers that do, they can fill up this field with their own version. The end result is a smaller code size. And if the framebuffer console is not loaded, module/kernel size is also reduced because the soft_cursor module will also not be loaded. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: extend partial support of i915G to include i915GMScott MacKenzie2005-11-07
| | | | | | | | | Add partial support for GMA900 within the i915GM chipset. Signed-off-by: Scott MacKenzie <irrational@poboxes.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: Fix regression (blank display) from ioremap patchAntonino A. Daplas2005-09-29
| | | | | | | | | | - Workaround for the ioremap patch that produces a blank display on some chipsets - Make hwcursor = 0 the default. The hardware cursor does not work with all hardware. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: prevent drivers that have hardware cursors from calling ↵James Simmons2005-09-09
| | | | | | | | | | | | | software cursor code This patch removes drivers that have hardware cursors from calling the software cursor code. Also if the driver sets a no hardware cursor flag then the driver reports a error it someone attempts to use the cursor. Signed-off-by: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: Do not ioremap entire graphics apertureSylvain Meyer2005-08-15
| | | | | | | | | | | | | | | | | | | | | Reported by: Pavel Kysilka (Bugzilla Bug 4738) modprobe of intelfb results in the following error message: intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chi intelfb: Version 0.9.2 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 allocation failed: out of vmalloc space - use vmalloc=<size> to increase siz intelfb: Cannot remap FB region. This will fail if the graphics aperture size is greater than 128 MB. Fix is to ioremap only from the beginning of graphics aperture to the end of the used framebuffer memory. Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: fill in the access_align field.James Simmons2005-06-21
| | | | | | | | | Several drivers miss filling in the access_align field. So this patch has them fill it in. Signed-off-by: James Simmons <jsimmons@www.infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: fix accel detection when changing video modesSylvain Meyer2005-06-21
| | | | | | | | | | | | | Changed the tests in intelfb_set_par to check also the parameter var.accel_flags. If null, do nothing about ring buffers. Now, the DirectFB i830 driver could nicely work even if intelfb is hw accelerated. Just change the /etc/fb.modes file to disable console hw acceleration when starting a DirectFB app. Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: Add voffset option to avoid conficts with Xorg i810 driverSylvain Meyer2005-06-21
| | | | | | | | - Add voffset option to avoid conficts with Xorg i810 driver Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfbdrv naming fixAndrew Morton2005-06-21
| | | | | | | | | | | | | | | | | | | | | | Can't use this fancy name, because it's used to generate a sysfs filename: kobject_register failed for Intel(R) 830M/845G/852GM/855GM/865G/915G Framebuffer Driver (-13) [<c01bf8e3>] kobject_register+0x43/0x70 [<c022dfe2>] bus_add_driver+0x52/0xa0 [<c01c8c10>] pci_device_shutdown+0x0/0x20 [<c01c8d71>] pci_register_driver+0x61/0x80 [<c0387099>] intelfb_init+0x59/0x70 [<c03787cc>] do_initcalls+0x2c/0xc0 [<c0159025>] kern_mount+0x15/0x17 [<c01002a0>] init+0x0/0x100 [<c01002ca>] init+0x2a/0x100 [<c0100f58>] kernel_thread_helper+0x0/0x18 [<c0100f5d>] kernel_thread_helper+0x5/0x18 Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb section fixPatrick McManus2005-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | On Nov 16 2004 a change to intelfbdrv.c was commited (as part of 0.9.2 it looks like) that added __initdata to all of the module param variables that seems to create the opportunity for an oops. I've recently been chasing an OOPS (http://marc.theaimsgroup.com/?l=linux-kernel&m=111552250920370&w=2) I created by reading every file on the /sys file system and I've traced it back to this code in the intelfbdrv. Though I had root privs in my initial problem report, it turns out they are un-necessary to generate the oops - all you've got to do is "cat /sys/module/intelfb/parameters/mode" enough times and eventually it will oops. This is because sysfs automatically exports all module_param declarations to the sysfs file system.. which means those variables can be dynamically evaluated at any later time, which of course means marking them __initdata is a bad idea ;).. when they happen to be char *'s it is an especially bad idea ;). Applying the patch below clears up the OOPS for me. Signed-off-by: Patrick McManus <mcmanus@ducksong.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] intelfb: Remove intelfbdrv.hAdrian Bunk2005-05-01
| | | | | | | | | | | | | Ingo Oeser noticed that all that intelfbdrv.h contains are prototypes for static functions - and such prototypes don't belong into header files. This patch therefore removes drivers/video/intelfb/intelfbdrv.h and moves the prototypes to intelfbdrv.c . Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-21 09:53:06 -0500