aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAge
* USB: storage: Unusual USB device Prolific 2507 variation addedThomas Bartosik2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add device id for Option GTM380 to option driverAchilleas Kotsis2009-03-17
| | | | | | | | | | Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add Vendor/Product ID for new CDMA U727 to option driverDirk Hohndel2009-03-17
| | | | | | | | | | | * newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Updated unusual-devs entry for USB mass storage on Nokia 6233Moritz Muehlenhoff2009-03-17
| | | | | | | | | | | | | Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
* USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530Dan Williams2009-03-17
| | | | | | | | | | | | | The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: expedite unlinks when the root hub is suspendedAlan Stern2009-03-17
| | | | | | | | | | | | | | | | | | | | | This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Brandon Philips <brandon@ifup.org> Tested-by: Brandon Philips <brandon@ifup.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: Fix isochronous URB leakKarsten Wiese2009-03-17
| | | | | | | | | | | | | | | | | ehci-hcd uses usb_get_urb() and usb_put_urb() in an unbalanced way causing isochronous URB's kref.counts incrementing once per usb_submit_urb() call. The culprit is *usb being set to NULL when usb_put_urb() is called after URB is given back. Due to other fixes there is no need for ehci-hcd to deal with usb_get_urb() nor usb_put_urb() anymore, so patch removes their usages in ehci-hcd. Patch also makes ehci_to_hcd(ehci)->self.bandwidth_allocated adjust, if a stream finishes. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option.c: add ZTE 622 modem deviceAlbert Pauw2009-03-17
| | | | | | | | | | Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw <albert.pauw@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: wusbcore/wa-xfer, fix lock imbalanceJiri Slaby2009-03-17
| | | | | | | | | Fix locking on one wa_urb_enqueue_b's fail path. There was omitted unlock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: misc/vstusb, fix lock imbalanceJiri Slaby2009-03-17
| | | | | | | | | Make sure we don't leak locked vstdev->lock in vstusb_write. Unlock properly on one fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: misc/adutux, fix lock imbalanceJiri Slaby2009-03-17
| | | | | | | | Don't unlock adutux_mutex when not held. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: image/mdc800, fix lock imbalanceJiri Slaby2009-03-17
| | | | | | | | | There is an omitted unlock in mdc800_usb_probe's fail path. Add it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Henning Zabel <henning@uni-paderborn.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: atm/cxacru, fix lock imbalanceJiri Slaby2009-03-17
| | | | | | | | | | We do not hold mutex in one place in cxacru_cm, but unlock it on fail path. Fix this. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Simon Arlott <cxacru@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs: Add support for GI 0431 SD-Card interfaceJan Dumon2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the SD-Card interface on the GI 0431 HSUPA stick from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7501 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: new cp2101 device idRobert M. Kenney2009-03-17
| | | | | | | From: Robert M. Kenney <rmk@unh.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist ↵Michael Hennerich2009-03-17
| | | | | | | | | | | interface0 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: add FTDI USB/Serial converter devicesAxel Wachtler2009-03-17
| | | | | | | | | | | | | | | | | | | | Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usbfs: keep async URBs until the device file is closedAlan Stern2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | The usbfs driver manages a list of completed asynchronous URBs. But it is too eager to free the entries on this list: destroy_async() gets called whenever an interface is unbound or a device is removed, and it deallocates the outstanding struct async entries for all URBs on that interface or device. This is wrong; the user program should be able to reap an URB any time after it has completed, regardless of whether or not the interface is still bound or the device is still present. This patch (as1222) moves the code for deallocating the completed list entries from destroy_async() to usbdev_release(). The outstanding entries won't be freed until the user program has closed the device file, thereby eliminating any possibility that the remaining URBs might still be reaped. This fixes a bug in which a program can hang in the USBDEVFS_REAPURB ioctl when the device is unplugged. Reported-and-tested-by: Martin Poupe <martin.poupe@upek.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usbtmc: add protocol 1 supportGreg Kroah-Hartman2009-03-17
| | | | | | | | | | | | The driver already supports the 1 protocol support, so just add it to the MODULE_DEVICE_TABLE entry so it properly picks up these devices. Thanks to Jouni Rynö for pointing this out. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usbtmc: fix stupid bug in open()Greg Kroah-Hartman2009-03-17
| | | | | | | | | | | open() will never succeed, as we always return -ENODEV. Fix this obvious bug. Thanks to Jouni Ryno for reporting it. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: fix srp sysfs entry deletionVikram Pandita2009-02-27
| | | | | | | | | | | | The SRP sysfs attribute is dependent on gadget mode; any gadget may support SRP. But "rmmod musb_hdrc" didn't remove that attribute; fix. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Acked-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: resume suspended root hub on disconnectAnand Gadiyar2009-02-27
| | | | | | | | | | | | | | | If this is not done, khubd will not be informed of the disconnect and will assume the device is still there. Easily seen when a hub is connected with no device attached to it; it will autosuspend. When the hub is disconnected, it still shows up in /proc/bus/usb/devices Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: use right poll limit for low speed devicesSergei Shtylyov2009-02-27
| | | | | | | | | | | Remove wrongly applied upper limit on the interrupt transfer interval for low speed devices (not much of an error per se, according to USB specs). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: be careful with 64K+ transfer lengths, host sideSergei Shtylyov2009-02-27
| | | | | | | | | | | | | | | | Feeding 32-bit length cast down to 'u16' to min() to calculate the FIFO count in musb_host_tx() risks sending a short packet prematurely for transfer sizes over 64 KB. Similarly, although data transfer size shouldn't exceed 65535 bytes for the control endpoint, making musb_h_ep0_continue() more robust WRT URBs with possibly oversized buffer will not hurt either... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: fix data toggle saving with shared FIFOSergei Shtylyov2009-02-27
| | | | | | | | | | | | | For some strange reason the host side musb_giveback() decides that it's always got an IN transfer when the hardware endpoint is using a shared FIFO. This causes musb_save_toggle() to read the toggle state from the RXCSR register instead of TXCSR, and may also cause unneeded reloading of RX endpoint registers. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: host endpoint_disable() oops fixesSergei Shtylyov2009-02-27
| | | | | | | | | | | | | | | | | | | | | | The musb_h_disable() routine can oops in some cases: - It's not safe to read hep->hcpriv outside musb->lock, since it gets changed on completion IRQ paths. - The list iterators aren't safe to use in that way; just remove the first element while !list_empty(), so deletions on other code paths can't make trouble. We need two "scrub the list" loops because only one branch should touch hardware and advance the schedule. [ dbrownell@users.sourceforge.net: massively simplify patch description; add key points as code comments ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: fix urb_dequeue() methodSergei Shtylyov2009-02-27
| | | | | | | | | | | | | | | | | | | | | | | The urb_dequeue() method forgets to unlink 'struct musb_qh' from the control or bulk schedules when the URB being cancelled is the only one queued to its endpoint. That will cause musb_advance_schedule() to block once it reaches 'struct musb_qh' with now empty URB list, so URBs queued for other endpoints after the one being dequeued will not be served. Fix by unlinking the QH from the list except when it's already being handled (typically by musb_giveback). Since a QH with an empty URB list is now supposed to be freed, do that. And remove a now-useless check from musb_advance_schedule(). [ dbrownell@users.sourceforge.net: update patch description, and fold in a dequeue() comment patch ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: fix musb_host_tx() for shared endpoint FIFODmitry Krivoschekov2009-02-27
| | | | | | | | | | | | | | | | | | The input queue should be used for TX on endpoints which share FIFO hardware. The host TX path wasn't doing that. Shared FIFOs are most often configured for periodic endpoints, which are mostly used for RX/IN transfers ... that's probably how this bug managed to linger for a long time. [ dbrownell@users.sourceforge.net: update patch description ] Signed-off-by: Dmitry Krivoschekov <dkrivoschekov@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: be careful with 64K+ transfer lengths (gadget side)Felipe Balbi2009-02-27
| | | | | | | | | | | | | request->actual is an unsigned and we should use the same variable type for fifo_count otherwise we might lose some data if request->length >= 64kbytes. [ dbrownell@users.sourceforge.net: fix compiler warning ] Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: musb: make Davinci *work* in mainlineDavid Brownell2009-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | Now that the musb build fixes for DaVinci got merged (RC3?), kick in the other bits needed to get it finally *working* in mainline: - Use clk_enable()/clk_disable() ... the "always enable USB clocks" code this originally relied on has since been removed. - Initialize the USB device only after the relevant I2C GPIOs are available, so the host side can properly enable VBUS. - Tweak init sequencing to cope with mainline's relatively late init of the I2C system bus for power switches, transceivers, and so on. Sanity tested on DM6664 EVM for host and peripheral modes; that system won't boot with CONFIG_PM enabled, so OTG can't yet be tested. Also verified on OMAP3. (Unrelated: correct the MODULE_PARM_DESC spelling of musb_debug.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb_get_string should check the descriptor typeAlan Stern2009-02-27
| | | | | | | | | | | | | | | | | | | | | This patch (as1218) fixes a problem with a radio-control joystick used in the "walkera 4#3" helicopter. This device responds to the initial Get-String-Descriptor request for string 0 (which is really the list of supported languages) by sending its config descriptor! The usb_get_string() routine needs to check whether it got the right type of descriptor. Oddly enough, this sort of check is already present in usb_get_descriptor(). The patch changes the error code from -EPROTO to -ENODATA, because -EPROTO shows up in so many other contexts to indicate a hardware failure rather than a firmware error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Guillermo Jarabo <williamjap@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> ===================================================================
* USB: gadget: fix build error in omap_apollon_2420_defconfigDavid Brownell2009-02-27
| | | | | | | | | | In apollon case, it only used udc, so udc configuration should select USB_OTG_UTILS also. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: g_file_storage: automatically disable stalls under AtmelAlan Stern2009-02-27
| | | | | | | | | | | | | This patch (as1220) automatically disables stalls when g_file_storage finds itself running with an Atmel device controller, because the Atmel hardware/driver isn't capable of halting bulk endpoints correctly. Reported-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adaptersAlan Stern2009-02-27
| | | | | | | | | | | | | This patch (as1219) adds the IGNORE_RESIDUE flag to the unusual_devs entries for Genesys Logic's USB-IDE adapter. Although this device usually gets the residue correct, there is one command crucial to the operation of CD and DVD drives which it messes up. Tested-by: Mike Lampard <mike@mtgambier.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Quirk for Hummingbird huc56s / Conexant ACM modemAdam Richter2009-02-27
| | | | | | | Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: add support for second revision of Ericsson F3507G WWAN cardPatrik Kullman2009-02-27
| | | | | | | | | I noticed that my revision of the F3507G WWAN card isn't listed in drivers/usb/serial/option.c Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cdc-acm: add usb id for motomagx phonesDmitriy Taychenachev2009-02-27
| | | | | | | | | | | | | The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the cdc-acm driver can properly handle this combined device. Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: add BenQ 3g modem informationJesse Sung2009-02-27
| | | | | | | | | | This patch addes the BenQ 3g modem support to the option driver. From: Jesse Sung <jsung@novell.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: obex: select correct ep descriptorsFelipe Balbi2009-02-27
| | | | | | | | | | | | | We where selecting wrong ep descriptors causing some troubles while sending files over obex interface. The problem was a typo while usb_find_endpoint() was being called for HS endpoints. Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: slow down ITD reuseKarsten Wiese2009-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | Currently ITDs are immediately recycled whenever their URB completes. However, EHCI hardware can sometimes remember some ITD state. This means that when the ITD is reused before end-of-frame it may sometimes cause the hardware to reference bogus state. This patch defers reusing such ITDs by moving them into a new ehci member cached_itd_list. ITDs resting in cached_itd_list are moved back into their stream's free_list once scan_periodic() detects that the active frame has elapsed. This makes the snd_usb_us122l driver (in kernel since .28) work right when it's hooked up through EHCI. [ dbrownell@users.sourceforge.net: comment fixups ] Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Tested-by: Philippe Carriere <philippe-f.carriere@wanadoo.fr> Tested-by: Federico Briata <federicobriata@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fsl_usb2_udc: fix potential queue head corruptionLi Yang2009-02-27
| | | | | | | | | | Clear next TD field and status field in queue head initialization code to prevent unpredictable result caused by residue of usb reset. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-02-19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC [ARM] omap: fix clock reparenting in omap2_clk_set_parent() [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo() [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller [ARM] 5391/1: AT91: Enable GPIO clocks earlier [ARM] 5390/1: AT91: Watchdog fixes [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910 [ARM] omap: fix _omap2_clksel_get_src_field() [ARM] omap: fix omap2_divisor_to_clksel() error return value
| * [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0Roel Kluin2009-02-19
| | | | | | | | | | | | | | | | *ep->reg_udccs is always set to 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | USB/PCI: Fix resume breakage of controllers behind cardbus bridgesRafael J. Wysocki2009-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | wusb: whci-hcd: always lock whc->lock with interrupts disabledDavid Vrabel2009-02-16
|/ | | | | | Always lock whc->lock with spin_lock_irq() or spin_lock_irqsave(). Signed-off-by: David Vrabel <david.vrabel@csr.com>
* USB: Storage: Update unusual_devs entry for Datafab KECF-USBNick Holloway2009-02-09
| | | | | | | | | This device suffers from the off-by-one error when reporting the capacity, so add US_FL_FIX_CAPACITY to the existing entry. Signed-off-by: Nick Holloway <Nick.Holloway@pyrites.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Correct Makefile to make isp1760 buildableIvan Kuten2009-02-09
| | | | | | | | Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: New mobile broadband modems to be supportedDirk De Schepper2009-02-09
| | | | | | | | | | | | | - New Novatel and Dell mobile broadband modem products added - Dell pid variables used in stead of numerical PIDs for known products Signed-off-by: Dirk De Schepper <ddeschepper@nvtl.com> Cc: stable <stable@kernel.org> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: two more usb ids for ti_usb_3410_5052Oliver Neukum2009-02-09
| | | | | | | | | | | This patch adds device IDs and balances the counts to make the hot ID additioning mechanism work. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Cc: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: unlock_kernel() on error in set_serial_info()Dan Carpenter2009-02-09
| | | | | | | | | | | There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-08 14:09:36 -0500