aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAge
* removed unused #include <linux/version.h>'sAdrian Bunk2008-08-23
| | | | | | | | This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.Stefan Lippers-Hollmann2008-08-21
| | | | | | | | | | | | | | | | sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp. usb 1-2: new high speed USB device using ehci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: USB2VGA dongle found at address 4 usb 1-2: Allocated 8 output buffers usb 1-2: 8MB 1 ch/1 r SDR SDRAM, bus width 32 usb 1-2: New USB device found, idVendor=0711, idProduct=0918 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Signed-off-by: Stefan Lippers-Hollmann <s.L-H@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: automatically enable RHSC interruptsAlan Stern2008-08-21
| | | | | | | | | | | | | | | | | This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Don't rebind before "complete" callbackAlan Stern2008-08-21
| | | | | | | | | | | | | | | | | | | | | This patch (as1130) fixes an incompatibility between the new PM infrastructure and USB power management. We are not allowed to call drivers' probe routines during a system sleep transition between the "prepare" and "complete" callbacks, but that's exactly what we do when a driver doesn't have full suspend/resume support. Such drivers are unbound during the "suspend" call and reprobed during the "resume" call. The patch causes the reprobe step to be skipped if the "complete" callback hasn't been issued yet, i.e., if the interface's dev.power.status field is not equal to DPM_ON. Thus during the "resume" callback nothing bad will happen, and during the final "complete" callback the reprobing will occur as desired. This fixes the problem reported in Bugzilla #11263. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add new PM callback methods for USBAlan Stern2008-08-21
| | | | | | | | | | | | | | | | This patch (as1129) adds support for the new PM callbacks to usbcore. The new callbacks merely invoke the same old USB power management routines as the old ones did. A minor improvement is that the callbacks are present only in the "USB-device" device_type structure, rather than in the bus_type structure. This way they will be invoked only for USB devices, not for USB interfaces. The core USB PM routines automatically handle suspending and resuming interfaces along with their devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Defer Set-Interface for suspended devicesAlan Stern2008-08-21
| | | | | | | | | | | | | | | | | | This patch (as1128) fixes one of the problems related to the new PM infrastructure. We are not allowed to register new child devices during the middle of a system sleep transition, but unbinding a USB driver causes the core to automatically install altsetting 0 and thereby create new endpoint pseudo-devices. The patch fixes this problem (and the related problem that installing altsetting 0 will fail if the device is suspended) by deferring the Set-Interface call until some later time when it is legal and can succeed. Possible later times are: when a new driver is being probed for the interface, and when the interface is being resumed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add udev argument to interface suspend/resume functionsAlan Stern2008-08-21
| | | | | | | | | | | | | | This patch (as1127) makes a minor change to the prototypes of the usb_suspend_interface() and usb_resume_interface() routines. Now the usb_device structure is passed as an argument, instead of being computed on-the-fly from the usb_interface argument. It makes the code look simpler, even if it really isn't much different from before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cdc-acm: don't unlock acm->mutex on error pathAlexey Dobriyan2008-08-21
| | | | | | | | | | | | | | | | | On Wed, Jul 23, 2008 at 03:52:36PM +0300, Andrei Popa wrote: > I installed gnokii-0.6.22-r2 and gave the command "gnokii --identify" > and the kernel oopsed: > > BUG: unable to handle kernel NULL pointer dereference at 00000458 > IP: [<c0444b52>] mutex_unlock+0x0/0xb > [<c03830ae>] acm_tty_open+0x4c/0x214 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Tested-by: Andrei Popa <andrei.popa@i-neo.ro> Cc: stable <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* MUSB: Fix index register corruption seen with g_ether and Windows hostAnand Gadiyar2008-08-21
| | | | | | | | | | | | | | | | | | | | If Indexed Mode register accesses are enabled, the ep0_rxstate() function calls musb_g_ep0_giveback() before writing to the CSR register. When control returns to this ep0_rxstate, the index register contents are over-written. This causes the CSR register write to fail. Fixed by writing the correct value into the index register before writing to the CSR. This was observed only in ep0_rxstate() with g_ether loaded and the device connected to a MS Windows host PC. Anticipatively fixed ep0_txstate() as well. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: musb: get rid of MUSB_LOGLEVEL and use parameterFelipe Balbi2008-08-21
| | | | | | | | | | | | | | | We can change debugging level on the fly via /sys/module/musb_hdrc/parameters/debug. We can also get rid of the LOGLEVEL facility in Kconfig and rely only in module parameter. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: musb: get rid of procfs entryFelipe Balbi2008-08-21
| | | | | | | | | | | | Drivers should not add procfs. The functionality in the old procfs file will be moved to debugfs. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix pxa27x_udc usb speed handling.Robert Jarzmik2008-08-21
| | | | | | | | | | | | | | The new composite framework revealed a weakness in the pxa27x_udc driver gadget register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets (like g_ether). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cdc-acm: quirk for Conexant CX93010 USB modemEric Sandeen2008-08-21
| | | | | | | | | | | This patch gets my Rosewill RNX-56USB USB modem (with Conexant CX93010 chipset) up and running to the point where I can send AT commands and retrieve caller ID data, which is all I want to do with it. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix bug in usb_unlink_anchored_urbs()Oliver Neukum2008-08-21
| | | | | | | | | Irqs must not accidentally be reenabled. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-serial: option support HSDPA modem A2502Hiroshi Miura2008-08-21
| | | | | | | | | | | | | | This patch support NTT DoCoMo A2502 3G/HSDPA modem on option driver. It is produced by AnyDATA Corp. and also sold as KT Freetelecom (Korea) ADU 620UW. It support 3.6Mbps/7.2Mbps hight speed communication. I have tested A2502 with NTT DoCoMo MoperaU ISP service. Signed-off-by: Hiroshi Miura <miurahr@nttdata.co.jp> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ISP1760: fixed trivial math in commentEnrico Scholz2008-08-21
| | | | | | | Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Acked-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-08-16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits) [ARM] 5191/1: ARM: remove CVS keywords [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16 [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD [ARM] 5198/1: PalmTX: PCMCIA fixes [ARM] Fix a pile of broken watchdog drivers [ARM] update mach-types [ARM] 5196/1: fix inline asm constraints for preload [ARM] 5194/1: update .gitignore [ARM] add proc-macros.S include to proc-arm940 and proc-arm946 [ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags [ARM] 5193/1: Wire up missing syscalls [ARM] traps: don't call undef hook functions with spinlock held [ARM] 5183/2: Provide Poodle LoCoMo GPIO names [ARM] dma-mapping: provide sync_range APIs [ARM] dma-mapping: improve type-safeness of DMA translations [ARM] Kirkwood: instantiate the orion_spi driver in the platform code [ARM] prevent crashing when too much RAM installed [ARM] Kirkwood: Instantiate mv_xor driver [ARM] Orion: Instantiate mv_xor driver for 5182 ...
| * Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King2008-08-09
| |\
| | * [ARM] Move include/asm-arm/plat-orion to arch/arm/plat-orion/include/platLennert Buytenhek2008-08-09
| | | | | | | | | | | | | | | | | | | | | This patch performs the equivalent include directory shuffle for plat-orion, and fixes up all users. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* | | usb: musb: pass configuration specifics via pdataFelipe Balbi2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use platform_data to pass musb configuration-specific details to musb driver. This patch will prevent that other platforms selecting HAVE_CLK and enabling musb won't break tree building. The other parts of it will come when linux-omap merge up more omap2/3 board-files. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb: musb: fix hanging when rmmod gadget driverFelipe Balbi2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we try to modprobe a second gadget driver before rmmoding the first one, the reference for the first gadget driver would get NULLed avoiding usb to change gadget drivers later. Cc: David Brownell <david-b@pacbell.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: Add MUSB and TUSB supportFelipe Balbi2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: serial: remove CONFIG_USB_DEBUG from sierra and option driversGreg Kroah-Hartman2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These drivers should not be relying on CONFIG_USB_DEBUG. By doing this, it prevents users of kernels that do not enable this option from enabling debugging in these drivers, unlike all other usb-serial drivers. Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: Add vendor/product id of ZTE MF628 to optionOliver Martin2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the vendor and product id (19d2:0015) of the ZTE MF628 HSDPA modem to the option driver. It still needs a mode switch command issued beforehand, this is currently handled by a userspace tool. Signed-off-by: Oliver Martin <oliver.martin@student.tuwien.ac.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: quirk PLL power down modeLibin Yang2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some AMD 700 series southbridges, ISO OUT transfers (such as audio playback through speakers) on the USB OHCI controller may be corrupted when an A-Link express power saving feature is active. PLL power down mode in conjunction with link power management feature L1 being enabled is the bad combination ... this patch prevents them from being enabled when ISO transfers are pending. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: omap_udc: fix compilation with debug enabledDmitry Baryshkov2008-08-13
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb: cdc-acm: drain writes on closeDavid Brownell2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a mechanism to let the write queue drain naturally before closing the TTY, rather than always losing that data. There is a timeout, so it can't wait too long. Provide missing locking inside acm_wb_is_avail(); it matters more now. Note, this presumes an earlier patch was applied, removing a call to this routine where the lock was held. Slightly improved diagnostics on write URB completion, so we can tell when a write URB gets killed and, if so, how much data it wrote first ... and so that I/O path is normally silent (and can't much change timings). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb: cdc-acm: stop dropping tx buffersDavid Brownell2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "increase cdc-acm write throughput" patch left in place two now-obsolete mechanisms, either of which can make the cdc-acm driver drop TX data (nasty!). This patch removes them: - The write_ready flag ... if an URB and buffer were found, they can (and should!) always be used. - TX path acm_wb_is_used() ... used when the buffer was just allocated, so that check is pointless. Also fix a won't-yet-matter leak of a write buffer on a disconnect path. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: David Engraf <david.engraf@netcom.eu> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb: cdc-acm: bugfix release()David Brownell2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bugfixes to the usb_driver_release_interface() usage; (a) make sure releasing *either* interface first will release the other, instead of insisting it be the control interface; (b) remove the recently-added self-deadlock. (The "fix disconnect bug in cdc-acm" patch was incomplete and incorrect.) Plus a small "sparse" fix: rename a local variable so it doesn't shadow a function parameter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb gadget: issue notifications from ACM functionDavid Brownell2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the CDC-ACM gadget code to support the peripheral-to-host notifications when the tty is opened or closed, or issues a BREAK. The serial framework code calls new generic hooks; right now only CDC-ACM uses those hooks. This resolves several REVISIT comments in the code. (Based on a patch from Felipe Balbi.) Note that this doesn't expose USB_CDC_CAP_BRK to the host, since this code still rejects USB_CDC_REQ_SEND_BREAK control requests for host-to-peripheral BREAK signaling (received via /dev/ttyGS*). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb gadget: remove needless struct membersDavid Brownell2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | This removes some unused members from the various USB functions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: sh: r8a66597-hcd: fix disconnect regressionYoshihiro Shimoda2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix the regression in commit 29fab0cd897519be9009ba8c898410ab83b378e9 that this driver executed reconnection processing when disconnected some devices. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: fix compiler warning fixAlan Stern2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1123b) fixes a compiler warning: do_unbind_rebind() is defined but not used if CONFIG_PM=n. Problem originally found and initial patch submitted by Alexander Beregalov <a.beregalov@gmail.com>. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb-storage: unusual_devs entry for Nokia 5300Alan Stern2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1120) adds an unusual_devs entry for the Nokia 5300. Maybe once Nokia releases the Symbian code we'll be able to fix all the problems it has with the USB mass-storage protocol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Cedric Godin <cedric@belbone.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: cdc-acm.c: Fix compile warningsTakashi Iwai2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The irq flags should be unsigned long. CC [M] drivers/usb/class/cdc-acm.o drivers/usb/class/cdc-acm.c: In function 'acm_waker': drivers/usb/class/cdc-acm.c:527: warning: comparison of distinct pointer types lacks a cast drivers/usb/class/cdc-acm.c:529: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: BandRich BandLuxe C150/C250 HSPA Data Card DriverLeon Leong2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the Product ID for the BandLuxe C150/C250 3.5G data card series from BandRich Inc. After detection, the data card works fine. It was patched against kernel 2.6.27-rc1 with -mm patch Signed-off-by: Leon Leong <upleong@bandrich.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: ftdi_sio: add support for PHI Fisco data cable (FT232BM based, VID/PID ↵Lex Ross2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 0403:e40b) Support for PHI Fisco USB to Serial data cable (FTDI FT232BM based). PHI Fisco cable is supplied for connecting Philips Xenium 9@9++ mobile phones. PIDs were missing. Tested successfully with PHI Fisco Data Cable (VID/PID 0403:e40b) Signed-off-by: Lex V. Ross <lross@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb: isp1760: don't be noisy about short packets.Sebastian Siewior2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Alan Stern, short packets are quite normal under certain circumstances. This printk was triggered by usb to serial converters on every packet and some usb sticks triggered a few of those while plugging the stick. This printks are now hidden unless USB debug mode is activated. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb: ISP1760: improve pre-fetch timingEnrico Scholz2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ISP1760 requires a delay of 90ns between programming the address and reading the data. Current driver solves this by a mdelay(1) which is very heavy weighted and slow. This patch applies the workaround from the ISP1760 FAQ by using two different banks for PTD and payload data and using a common wait for them. This wait is done by an additional ISP1760 access (whose timing constraints guarantee the 90ns delay). This improves speed when reading from an USB stick from: $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638 real 1m 15.43s user 0m 0.44s sys 0m 39.46s to $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638 real 0m 18.53s user 0m 0.16s sys 0m 12.97s [bigeasy@linutronix.de: fixed comment formating, moved define into header file, obey 80 char rule] Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | usb: return error code instead of 0 in the enqueue function.Sebastian Siewior2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if the enqueue function returns -ESHUTDOWN or -ENOMEM then we return 0 instead of an error. This leads to a timeout and then to a dequeue request of an not enqueued urb. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: serial gadget: rx path data loss fixesDavid Brownell2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update RX path handling in new serial gadget code to cope better with RX blockage: queue every RX packet until its contents can safely be passed up to the ldisc. Most of the RX path work is now done in the RX tasklet, instead of just the final "push to ldisc" step. This addresses some cases of data loss: - A longstanding serial gadget bug: when tty_insert_flip_string() didn't copy the entire buffer, the rest of the characters were dropped! Now that packet stays queued until the rest of its data is pushed to the ldisc. - Another longstanding issue: in the unlikely case that an RX transfer returns data and also reports a fault, that data is no longer discarded. - In the recently added RX throttling logic: it needs to stop pushing data into the TTY layer, instead of just not submitting new USB read requests. When the TTY is throttled long enough, backpressure will eventually make the OUT endpoint NAK. Also: an #ifdef is removed (no longer necessary); and start switching to a better convention for debug messages (prefix them with tty name). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: Hook start_hnp into ohci structDmitry Baryshkov2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: ohci: make distrust_firmware a quirkDmitry Baryshkov2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: cxacru: Fix printk format flag in error messageSimon Arlott2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | "#%x" should have been "%#x" Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: usb-storage Motorola Phone Razr v3xx US_FL_FIX_CAPACITY patchJost Diederichs2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add razr v3xx US_FL_FIX_CAPACITY flag to unusual_devs.h in usb-storage This is another Motorola phone that incorrectly reports the sector count (off by one). Problem Description: io errors when mounting phone's sd-card via the phones usb port Steps to reproduce: mount Motorola Razr v3xx phones sd-card on Linux Desktop via usb cable. Phones USB port must be in memory card mode. DEBUG output: Jul 9 19:32:41 micky kernel: Buffer I/O error on device sdd, logical block 3970048 Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Sense Key : Medium Error [current] Jul 9 19:32:41 micky kernel: sd 11:0:0:0: [sdd] Add. Sense: No additional sense information Jul 9 19:32:41 micky kernel: end_request: I/O error, dev sdd, sector 3970048 From: Jost Diederichs <jost@qdusa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB Storage Sierra: TRU-Install feature updateKevin Lloyd2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch upgrades the support for the Sierra Wireless TRU-Install feature (i.e. zeroCD) to allow for future support of Linux enabled TRU-Install devices. By default all devices that do not have a Linux enabled TRU-Install device (i.e. the device does not have a Linux package on the virtual CD partition) will be switched into "modem mode." Devices that do contain a Linux package in the TRU-Install virtual CD will be allowed to enumerate as a CD-Rom so that either (a) a user can install the packaged software or (b) a user-space application (e.g. udev) can switch it to modem mode. This patch does allow for manual override by adding a usb-storage module parameter 'swi_tru_install' which can force the modem into either mode regardless of what packages it contains. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB Serial Sierra: TRU-Install feature updateKevin Lloyd2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Moves responsbility of TRU-Install (i.e. ZeroCD) to the usb-storage driver. See patch 04/04 of this set. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB Serial Sierra: Dynamic interface detectionKevin Lloyd2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the method by which the number of ports per interface is assigned so that it is more dynamic and calculated on the fly (as opposed to hard coding it). This will allow for faster and easier addition of products. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB Serial Sierra: clean-upKevin Lloyd2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Very minor changes to clean up sierra code. Adds a prefix to debug messages so that Sierra messages are easily recognized. Removes extraneous code. This targets kernel 2.6.26-rc9 Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | USB: pl2023: Remove USB id (4348:5523) handled by ch341Tollef Fog Heen2008-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB ID 4348:5523 is handled by the ch341 driver. Remove it from the pl2023 driver. Reverts 002e8f2c80c6be76bb312940bc278fc10b2b2487. Signed-off-by: Tollef Fog Heen <tfheen@err.no> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>