aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAge
...
| * | USB: xHCI: Isoc urb enqueueAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable isochronous urb enqueue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: allocate bigger ring for isochronous endpointAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Isochronous endpoint needs a bigger size of transfer ring. Isochronous URB consists of multiple packets, each packet needs a isoc td to carry, and there will be multiple trbs inserted to the ring at one time. One segment is too small for isochronous endpoints, and it will result in room_on_ring() check failure and the URB is failed to enqueue. Allocate bigger ring for isochronous endpoint. 8 segments should be enough. This will be replaced with dynamic ring expansion in the future. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: Isochronous transfer implementationAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements isochronous urb enqueue and interrupt handler part. When an isochronous urb is passed to xHCI driver, first check the transfer ring to guarantee there is enough room for the whole urb. Then update the start_frame and interval field of the urb. Always assume URB_ISO_ASAP is set, and never use urb->start_frame as input. The number of isoc TDs is equal to urb->number_of_packets. One isoc TD is consumed every Interval. Each isoc TD consists of an Isoch TRB chained to zero or more Normal TRBs. Call prepare_transfer for each TD to do initialization; then calculate the number of TRBs needed for each TD. If the data required by an isoc TD is physically contiguous (not crosses a page boundary), then only one isoc TRB is needed; otherwise one or more additional normal TRB shall be chained to the isoc TRB by the host. Set TRB_IOC to the last TRB of each isoc TD. Do not ring endpoint doorbell to start xHC procession until all the TDs are inserted to the endpoint transer ring. In irq handler, update urb status and actual_length, increase urb_priv->td_cnt. When all the TDs are completed(td_cnt is equal to urb_priv->length), giveback the urb to usbcore. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: Introduce urb_priv structureAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add urb_priv data structure to xHCI driver. This structure allows multiple xhci TDs to be linked to one urb, which is essential for isochronous transfer. For non-isochronous urb, only one TD is needed for one urb; for isochronous urb, the TD number for the urb is equal to urb->number_of_packets. The length field of urb_priv indicates the number of TDs in the urb. The td_cnt field indicates the number of TDs already processed by xHC. When td_cnt matches length, the urb can be given back to usbcore. When an urb is dequeued or cancelled, add all the unprocessed TDs to the endpoint's cancelled_td_list. When process a cancelled TD, increase td_cnt field. When td_cnt equals urb_priv->length, giveback the cancelled urb. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: Missed Service Error Event processAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds mechanism to process Missed Service Error Event. Sometimes the xHC is unable to process the isoc TDs in time, it will generate Missed Service Error Event. In this case some TDs on the ring are not processed and missed. When encounter a Missed Servce Error Event, set the skip flag of the ep, and process the missed TDs until reach the next processed TD, then clear the skip flag. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: adds new cases to trb_comp_code switchAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds new cases to trb_comp_code switch, and moves the switch judgment ahead of fetching td. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: remove redundant print messagesAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove redundant print messages in the interrupt context. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB xHCI: handle_tx_event() refactor: process_bulk_intr_tdAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the bulk and interrupt td processing part in handle_tx_event() into a separate function process_bulk_intr_td(). Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: handle_tx_event() refactor: process_ctrl_tdAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the ctrl td processing part in handle_tx_event() into a separate function process_ctrl_td(). Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xHCI: handle_tx_event() refactor: finish_tdAndiry Xu2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the td universal processing part in handle_tx_event() into a separate function finish_td(). if finish_td() returns 1, it indicates the urb can be given back. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: option: Huawei ETS 1220 support addedPavel Kazlou2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds Huawei ETS 1220 product id into the list of supported devices in 'option' usb serial driver. Signed-off-by: Pavel Kazlou <p.i.kazlou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB delay init quirk for logitech Harmony 700-series devicesPhil Dibowitz2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Logitech Harmony 700 series needs an extra delay during initialization. This patch adds a USB quirk which enables such a delay and adds the device to the quirks list. Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: resizing usbmon binary interface buffer causes protection faultsSteven Robertson2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enlarging the buffer size via the MON_IOCT_RING_SIZE ioctl causes general protection faults. It appears the culprit is an incorrect argument to mon_free_buff: instead of passing the size of the current buffer being freed, the size of the new buffer is passed. Use the correct size argument to mon_free_buff when changing the size of the buffer. Signed-off-by: Steven Robertson <steven@strobe.cc> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: functionfs: stale Makefile entry removedMichal Nazarewicz2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed entry referencing g_eth_ffs.c file from Makefile. The file never existed and the line was a leftover from a developing process. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: remove dead code in the periodic schedulerAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1409) removes some dead code from the ehci-hcd scheduler. Thanks to the previous patch in this series, stream->depth is no longer used. And stream->start and stream->rescheduled apparently have not been used for quite a while, except in some statistics-reporting code that never gets invoked. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: reorganize isochronous scheduler routineAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1408) rearranges the scheduling code in ehci-hcd, partly to improve its structure, but mainly to change the way it works. Whether or not a transfer exceeds the hardware schedule length will now be determined by looking at the last frame the transfer would use, instead of the first available frame following the end of the transfer. The benefit of this change is that it allows the driver to accept valid URBs which would otherwise be rejected. For example, suppose the schedule length is 1024 frames, the endpoint period is 256 frames, and a four-packet URB is submitted. The four transfers would occupy slots that are 0, 256, 512, and 768 frames past the current frame (plus an extra slop factor). These don't exceed the 1024-frame limit, so the URB should be accepted. But the current code notices that the next available slot would be 1024 frames (plus slop) in the future, which is beyond the limit, and so the URB is rejected unnecessarily. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: add missing frame -> microframe conversionAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1407) fixes a bug in ehci-hcd's isochronous scheduler. All its calculations should be done in terms of microframes, but for full-speed devices, sched->span is stored in frames. It needs to be converted. This fix is liable to expose problems in other drivers. The old code would accept URBs that should not have been accepted, so drivers have had no reason to avoid submitting URBs that exceeded the maximum schedule length. In an attempt to partially compensate for this, the patch also adjusts the schedule length from a minimum of 256 frames up to a minimum of 512 frames. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: simplify remainder computationsAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1406) adds a micro-optimization to ehci-hcd's scheduling code. Instead of computing remainders with respect to the schedule length, use bitwise-and (which is quicker). We know that the schedule length will always be a power of two, but the compiler doesn't have this information. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: remove PCI assumptionAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1405) fixes a small bug in ehci-hcd's isochronous scheduler. Not all EHCI controllers are PCI, and the code shouldn't assume that they are. Instead, introduce a special flag for controllers which need to delay iso scheduling for full-speed devices beyond the scheduling threshold. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: David Brownell <david-b@pacbell.net> CC: stable <stable@kernel.org> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | USB: xHCI: Supporting MSI/MSI-XDong Nguyen2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable MSI/MSI-X supporting in xhci driver. Provide the mechanism to fall back using MSI and Legacy IRQs if MSI-X IRQs register failed. Signed-off-by: Dong Nguyen <Dong.Nguyen@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>, Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: otg/ulpi: extend the generic ulpi driver.Igor Grinberg2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Introduce ulpi specific flags for control of the ulpi phy 2) Extend the generic ulpi driver with support for Function and Interface control of upli phy 3) Update the platforms using the generic ulpi driver with new ulpi flags 4) Remove the otg control flags not in use Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: otg/ulpi: add support for SMSC USB3319 ulpi phyIgor Grinberg2010-08-10
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: otg/ulpi: remove unused macroIgor Grinberg2010-08-10
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: otg/ulpi.c : fix register writeEric Bénard2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ulpi_set_vbus and ulpi_set_flags are using ULPI_SET(register) to write to the PHY's registers, which means we can only set bits in the PHY's register and not clear them. By directly using the address of the register without any offset, we now get the expected behaviour for these functions. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: io_ti.c: don't return 0 if writing the download record failedRoel Kluin2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | If the write download record failed we shouldn't return 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: host: Remove dead CONFIG_ARCH_KAROChristian Dietrich2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_ARCH_KARO doesn't exist in Kconfig and is never defined anywhere else, therefore removing all references for it from the source code. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: serial: enable async suspend for usb serial port deviceMing Lei2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usb serial port device is child of its usb interface device, so we can enable async suspend of usb serial port device to speedup system suspend. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: musb: forward debug mode feature to gadgetstephane duverger2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch for the musb usb controller. It allows forwarding of the debug mode feature to its gadget in order to be able to act as an ehci debug device. This patch has been tested on an IGEPv2 board running a 2.6.35-rc1 kernel. Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI Debug Port Device Gadgetstephane duverger2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch that implements an USB EHCI Debug Device using the Gadget API. This patch applies to a 2.6.35-rc3 kernel. The gadget needs a compliant usb controller that forwards the USB_DEVICE_DEBUG_MODE feature to its gadget. The gadget provides two configuration modes, one that only printk() the received data, and one that exposes a serial device to userland (/dev/ttyGSxxx). The gadget has been tested on an IGEPv2 board running a 2.6.35-rc1 kernel. The debug port was fed on the host side by a 2.6.34 kernel. Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: Remove unnecessary casts of private_dataJoe Perches2010-08-10
| | | | | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: misc: Remove unnecessary casts of private_dataJoe Perches2010-08-10
| | | | | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: usb-skeleton: Remove unnecessary casts of private_dataJoe Perches2010-08-10
| | | | | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: autoconvert trivial BKL users to private mutexArnd Bergmann2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: storage: freecom: Fixed several coding style issues.Martin Enderleit2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed several coding style issues in freecom.c. Signed-off-by: Martin Enderleit <menderleit@gmail.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: musb: do not override DMA mode in channel programAnand Gadiyar2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason for the DMA channel program to override the DMA mode passed down by its caller. Use the passed parameter directly, and let the caller handle the decision on which mode is to be used. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: musb: Kill board specific pinmux from driver fileAnand Gadiyar2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This pin-muxing is best done in the board files. The driver should not do this explicitly. Also, this code causes a warning to be thrown when OMAP2430 and OMAP3/4 support are enabled in the same kernel. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ehci_omap: fix device detect issue with modulesAjay Kumar Gupta2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently devices don't get detected automatically if the ehci module is inserted 2nd time onward. We need to disconnect and reconnect the device for it to get detected and enumerated. Resetting the USB PHY using PHY reset comamnd over ULPI fixes this issue. Tested on OMAP3EVM. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: musb: fix compilation warning in host only modeAjay Kumar Gupta2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes below compilation warning when host only configuration is selected. drivers/usb/musb/musb_core.c: In function 'musb_stage0_irq': drivers/usb/musb/musb_core.c:711: warning: unused variable 'mbase' Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: musb: use correct register widths in register dumpsAnand Gadiyar2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DMA_ADDR and DMA_COUNT are 32-bit registers, not 16-bit. Marking them as 16-bit in the table causes only the lower 16-bits to be dumped and this is misleading. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: core: hcd-pci: use for_each_pci_dev()Kulikov Vasiliy2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use for_each_pci_dev() to simplify the code. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: serial: io_ti: Don't return 0 if writing the download record failedRoel Kluin2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | If the write download record failed we shouldn't return 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: storage_common: comments updatedMichal Nazarewicz2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updated comment to describe why printing macros are needed even thought they are copied form the composite.h. Also, made multiline comments follow the coding standard. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: compilation issue: missing TASK_INTERRUPTIBLEstephane duverger2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here is the patch for the following issue: drivers/usb/gadget/u_serial.c: In function ‘gs_start_tx’: drivers/usb/gadget/u_serial.c:369: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:369: error: (Each undeclared identifier is reported only once drivers/usb/gadget/u_serial.c:369: error: for each function it appears in.) drivers/usb/gadget/u_serial.c: In function ‘gs_rx_push’: drivers/usb/gadget/u_serial.c:546: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c: In function ‘gs_close’: drivers/usb/gadget/u_serial.c:857: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘signal_pending’ drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘schedule_timeout’ drivers/usb/gadget/u_serial.c: In function ‘gserial_cleanup’: drivers/usb/gadget/u_serial.c:1190: error: ‘TASK_UNINTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:1190: error: implicit declaration of function ‘schedule’ drivers/usb/gadget/u_serial.c: In function ‘gserial_disconnect’: drivers/usb/gadget/u_serial.c:1311: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEMAndrea Righi2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we use the HCD_LOCAL_MEM flag and dma_declare_coherent_memory() to enforce the host controller's local memory utilization we also need to disable native scatter-gather support, otherwise hcd_alloc_coherent() in map_urb_for_dma() is called with urb->transfer_buffer == NULL, that triggers a NULL pointer dereference. We can also consider to add a WARN_ON() and return an error code to better catch this problem in the future. At the moment no driver seems to hit this bug, so I should consider this a low-priority fix. Signed-off-by: Andrea Righi <arighi@develer.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: xhci: trivial: use ARRAY_SIZEKulikov Vasiliy2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: drivers/usb/Makefile: conditionally descend to 'early'Nicolas Kaiser2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Don't descend to the EARLY_PRINTK_DBGP directory unless it is actually used. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: usblp: fixed switch, brace, whitespace and spacing coding style issuesNicolas Kaiser2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed switch, brace, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: add runtime PM for PCI-based host controllersAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1386) adds runtime-PM support for PCI-based USB host controllers. By default autosuspend is disallowed; the user must enable it by writing "auto" to the controller's power/control sysfs attribute. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: add support for Intel's wakeup flagsAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1396) adds code to uhci-hcd to support the vendor-specific wakeup settings found in Intel's ICHx hardware. A couple of unnecessary memory barriers are removed. And the root hub isn't put back into the "suspended" state if power was lost during a system sleep -- there's not much point in doing so because the root hub will be resumed shortly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: fix race between root-hub wakeup & controller suspendAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup races. This is another general race pattern, similar to the "open vs. unregister" race we're all familiar with. Here, the race is between suspending a device and receiving a wakeup request from one of the device's suspended children. In particular, if a root-hub wakeup is requested at about the same time as the corresponding USB controller is suspended, and if the controller is enabled for wakeup, then the controller should either fail to suspend or else wake right back up again. During system sleep this won't happen very much, especially since host controllers generally aren't enabled for wakeup during sleep. However it is definitely an issue for runtime PM. Something like this will be needed to prevent the controller from autosuspending while waiting for a root-hub resume to take place. (That is, in fact, the common case, for which there is an extra test.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-26 13:13:36 -0500