aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAge
...
* USB: add RESET_RESUME device quirkAlan Stern2007-07-12
| | | | | | | | | | | | This patch (as888) adds a new USB device quirk for devices which are unable to resume correctly. By using the new code added for the USB-persist facility, it is a simple matter to reset these devices instead of resuming them. To get things kicked off, a quirk entry is added for the Philips PSC805. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI, OHCI: handover changesAlan Stern2007-07-12
| | | | | | | | | | | | | | | | | | | This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss of VBUS power during suspend. In order for the USB-persist facility to work correctly, it is necessary for low- and full-speed devices attached to a high-speed port to be handed back to the companion controller during resume processing. This entails three changes: adding code to ehci-hcd to perform the handover, removing code from ohci-hcd to turn off ports during root-hub reinit, and adding code to ohci-hcd to turn on ports during PCI controller resume. (Other bus glue resume methods for platforms supporting high-speed controllers would need a similar change, if any existed.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add USB-Persist facilityAlan Stern2007-07-12
| | | | | | | | | | | | | | | | | This patch (as886) adds the controversial USB-persist facility, allowing USB devices to persist across a power loss during system suspend. The facility is controlled by a new Kconfig option (with appropriate warnings about the potential dangers); when the option is off the behavior will remain the same as it is now. But when the option is on, people will be able to use suspend-to-disk and keep their USB filesystems intact -- something particularly valuable for small machines where the root filesystem is on a USB device! Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usbmon: Add class for binary interfacePete Zaitcev2007-07-12
| | | | | | | | | | | | | | | | Add a class which allows for an easier integration with udev. This code was originally written by Paolo Abeni, and arrived to my tree as a part of big patch to add binary API on December 18. As I understand, Paolo always meant the class to be a part of the whole thing. This is his udev rule to go along with the patch: KERNEL=="usbmon[0-9]*", NAME="usbmon%n", MODE="0440",OWNER="root",GROUP="bin" Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: oti6858 usb-serial driver (in Nokia CA-42 cable)Kees Lemmens2007-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Last week I've been searching for a driver for the CA-42 cable (see usb below) that fitted my kernel 2.6.20. I only found an abandoned version for a driver on your website that indeed worked on 2.6.18 but wouldn't even compile with a more recent 2.6.20 kernel. I fiddled 2 evenings with the kernel code and have patched it up now to work with the modifications in the 2.6.20 kernel. The patch is attached hereafter and it works fine (at least for me :-) ). Bus 2 Device 13: ID 0ea0:6858 Ours Technology, Inc. I had to fiddle a little with the settings in .gnokiirc but that also occurred with the older 2.6.18 kernel. Nevertheless, on one system with this cable and my Nokia 6070 I had best results with : model = 6510 connection = dku5 while on an other system with the same kernel, cable and phone it only worked with : model = AT connection = serial serial_write_usleep = 1 From: Kees Lemmens <C.W.J.Lemmens@ewi.tudelft.nl> Cc: <pawel.kot@gmail.com> Cc: <bozo@andrews.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci refcounts work on ppc7448David Brownell2007-07-12
| | | | | | | | | | | | Remove atomic operations on the reference counter for EHCI queue heads. On various platforms (including ppc7448), atomic operations are unusable with dma-coherent memory. Signed-off-by: Steven J. Hill <sjhill1@rockwellcollins.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Use menuconfig objectsJan Engelhardt2007-07-12
| | | | | | | | | | | Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: make hub driver's release more robustAlan Stern2007-07-12
| | | | | | | | | | | | This revised patch (as893c) improves the method used by the hub driver to release its private data structure. The current code is non-robust, relying on a memory region not getting reused by another driver after it has been freed. The patch adds a reference count to the structure, resolving the question of when to release it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove "locktree" routine from the hub driverAlan Stern2007-07-12
| | | | | | | | | | This patch (as892) removes the "locktree" routine from the hub driver. It currently is used in only one place, by a single kernel thread; hence it isn't doing any good. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove references to dev.power.power_stateAlan Stern2007-07-12
| | | | | | | | | | | | This revised patch (as891b) removes two unnecessary references to intf->dev.power.power_state from usb-storage, and replaces a reference to root_hub->dev.power.power_state with a check of hcd->state. This is in preparation for the removal of dev.power.power_state, which is already deprecated. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: don't unsuspend for a new connectionAlan Stern2007-07-12
| | | | | | | | | | | | This patch (as889) prevents the hub driver from trying to resume a port when there is a new connection. For one thing, the resume is not needed -- the upcoming port reset will clear the suspend feature automatically. For another, on some systems the resume fails and causes problems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: move bus_suspend and bus_resume method callsAlan Stern2007-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Implement PM FREEZE and PRETHAWAlan Stern2007-07-12
| | | | | | | | | | | | | This patch (as884) finally implements the time-saving semantics possible with the Power Management FREEZE and PRETHAW events. Their proper handling requires only that devices be quiesced, with interrupts and DMA turned off; non-root USB devices don't actually need to be put in a suspended state. The patch checks and avoids doing the suspend call when possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: interface PM stateAlan Stern2007-07-12
| | | | | | | | | | This patch (as880) strives to keep the PM core's idea of a USB interface's power state in synch with usbcore's own idea. In the end this doesn't really matter, but it's better to be consistent. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: r8a66597-hcd: fix NULL accessYoshihiro Shimoda2007-07-12
| | | | | | | | | This patch fixes the problem that accesses NULL pointer when disconnected a cable while play music with usb-speaker. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: r8a66597-hcd: host controller driver for R8A66597Yoshihiro Shimoda2007-07-12
| | | | | | | | | | | | | | | | | | | | | | | I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: m66592-udc: fix use old interrupt flagsYoshihiro Shimoda2007-07-12
| | | | | | | | This patch fixes the problem that used SA_* flags. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: m66592-udc: peripheral controller driver for M66592Yoshihiro Shimoda2007-07-12
| | | | | | | | | | | | | | I would like to submit Renesas M66592 udc driver. The M66592 is Renesas USB 2.0 peripheral controller. This controller supports USB high-speed. The driver has been tested Gadget Zero, Ethernet Gadget, File-backed Storage Gadget, and passed usbtest script. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB Serial Keyspan: add support for USA-49WG & USA-28XGLucy McCoy2007-07-12
| | | | | | | | | Add support for Keyspan adapters: USA-49WG and USA-28XG Signed-off-by: Lucy P. McCoy <lucy@keyspan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cxacru: Cleanup sysfs attribute codeSimon Arlott2007-07-12
| | | | | | | | | | | | | This changes the format of unknown status values to be less verbose and uses an array instead of several different snprintf calls. Since only enum values are assigned to it, poll_state is changed from int to enum. Use abs() for dB values instead of two almost identical return lines. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI support for big-endian descriptorsStefan Roese2007-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements supports for EHCI controllers whose in-memory data structures are represented in big-endian format. This is needed (unfortunately) for the AMCC PPC440EPx SoC EHCI controller; the EHCI spec doesn't specify little-endian format, although that's what most other implementations use. The guts of the patch are to introduce the hc32 type and change all references from le32 to hc32. All access routines are converted from cpu_to_le32(...) to cpu_to_hc32(ehci, ...) and similar for the other "direction". (This is the same approach used with OHCI.) David fixed: Whitespace fixes; refresh against ehci cpufreq patch; move glue for that PPC driver to the patch adding it; fix free symbol capture bugs in modified "constant" macros; and make "hc32" etc be "le32" unless we really need the BE options, so "sparse" can do some real good. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI cpufreq fixStuart_Hayes@Dell.com2007-07-12
| | | | | | | | | | | | | | | | | EHCI controllers that don't cache enough microframes can get MMF errors when CPU frequency changes occur between the start and completion of split interrupt transactions, due to delays in reading main memory (caused by CPU cache snoop delays). This patch adds a cpufreq notifier to the EHCI driver that will inactivate split interrupt transactions during frequency transitions. It was tested on Intel ICH7 and Serverworks/Broadcom HT1000 EHCI controllers. Signed-off-by: Stuart Hayes <stuart_hayes@dell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: suspend support for usb serialOliver Neukum2007-07-12
| | | | | | | | this implements generic support for suspend/resume for usb serial. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-07-12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
| * PCI: add pci_try_set_mwiRandy Dunlap2007-07-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As suggested by Andrew, add pci_try_set_mwi(), which does not require return-value checking. - add pci_try_set_mwi() without __must_check - make it return 0 on success, errno if the "try" failed or error - review callers Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * PCI: Change all drivers to use pci_device->revisionAuke Kok2007-07-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | PM: Remove prev_state from struct dev_pm_infoRafael J. Wysocki2007-07-11
|/ | | | | | | | | | | | | | The prev_state member of struct dev_pm_info (defined in include/linux/pm.h) is only used during a resume to check if the device's state before the suspend was 'off', in which case the device is not resumed. However, in such cases the decision whether or not to resume the device should be made on the driver level and the resume callbacks from the device's bus and class should be executed anyway (the may be needed for some things other than just powering on the device). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* potential compiler error, irqfunc caller sites updateYoann Padioleau2007-07-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 7d12e780e003f93433d49ce78cfedf4b4c52adc5 David Howells performed this evolution: "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers" He correctly updated many of the function definitions that were using this extra regs pointer parameter but forgot to update some caller sites of those functions. The reason the modifications was not properly done on all drivers is that some drivers were rarely compiled because they are for AMIGA, or that some code sites were inside #ifdefs where the option is not set or inside #if 0. Here is the semantic patch that found the occurences and fixed the problem. @ rule1 @ identifier fn; identifier irq, dev_id; typedef irqreturn_t; @@ static irqreturn_t fn(int irq, void *dev_id) { ... } @@ identifier rule1.fn; expression E1, E2, E3; @@ fn(E1, E2 - ,E3 ) Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: ftdio_sio: New IPlus device IDLuiz Fernando N. Capitulino2007-06-26
| | | | | | | | Reported by Grzegorz Chimosz <gchimi@gmail.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add new device id to option driverAlexander Gattin2007-06-26
| | | | | | Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix race leading to use after free in io_edgeportOliver Neukum2007-06-26
| | | | | | | | | | | | | usb_unlink_urb() is asynchronous, therefore an URB's buffer may not be freed without waiting for the completion handler. This patch switches to usb_kill_urb(), which is synchronous. Thanks to Alan for making me look at the remaining users of usb_unlink_urb() Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usblcd doesn't limit memory consumption during writeOliver Neukum2007-06-26
| | | | | | | | | | | usblcd currently has no way to limit memory consumption by fast writers. This is a security problem, as it allows users with write access to this device to drive the system into oom despite resource limits. Here's the fix taken from the modern skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: memory leak in iowarrior.cOliver Neukum2007-06-26
| | | | | | | | | this is a classical memory leak in the ioctl handler. The buffer is simply never freed. This fixes it the obvious way. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ti serial driver sleeps with spinlock heldOliver Neukum2007-06-26
| | | | | | | | | | | you are submitting an URB with GFP_KERNEL holding a spinlock. In this case the spinlock can be dropped earlier. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: g_file_storage: call allow_signal()Oleg Nesterov2007-06-26
| | | | | | | | | | | New changes in the signal-handling code require compensating changes in g_file_storage. This patch (as913) by Oleg Nesterov makes the code use allow_signal() instead of sigprocmask(). From: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* OHCI: Fix machine check in ohci_hub_status_dataAlan Stern2007-06-08
| | | | | | | | | | | This patch (as901) fixes an oversight in ohci-hcd. The hub_status_data routine must not try to access the controller's memory-mapped registers if the controller is in a low-power state; such attempts will cause a crash on some architectures (such as PPC). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix up bogus bInterval values in endpoint descriptorsAlan Stern2007-06-08
| | | | | | | | | | | | This patch (as904) adds code to check for endpoint descriptor bInterval values outside the legal limits. Illegal values are set to 32 ms, which seems like a reasonable default. This fixes Bugzilla #8432. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cxacru: ignore error trying to start ADSL in atm_startSimon Arlott2007-06-08
| | | | | | | | | | | | | | | | | | | | The sysfs adsl_status attribute ignores (aside from returning -EIO to the user) any error sending a START/STOP command to the device and there is at least one firmware which never sends a response but appears to work regardless. Therefore atm_start should also continue if an error is received so that such firmware is usable. The official Conexant driver doesn't expect a reply either but this is for another device (E2 router) and a commonly used firmware does respond. Also, there is no point in changing -ECONNRESET to -ETIMEDOUT since nothing ever checks for either of these values. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cxacru: create sysfs attributes in atm_start instead of bindSimon Arlott2007-06-08
| | | | | | | | | | | | | | | | | | | | | | Since usbatm doesn't set the usb_interface driver data until after calling bind and heavy_init, it would be NULL when the sysfs attributes are read. Reading the MAC address from atm_dev before atm_dev exists would have been be possible too. Calling create_device_file in atm_start will avoid this problem, and the data is useless until the first status poll runs. However, it must be ready before a status poll does a printk on line status change otherwise userspace could react before the files exist. For completeness I've moved remove_device_file to atm_stop so it's not called in unbind when it's not needed. There's no point starting ADSL if atm_start could still fail either. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UNUSUAL_DEV: Sync up some reported devices from UbuntuBen Collins2007-06-08
| | | | | | | | | | | UNUSUAL_DEV: Sync up some reported devices from Ubuntu Various unusual dev entries accumulated from Ubuntu bug reports. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com>
* USB: usb gadgets avoid le{16,32}_to_cpup()David Brownell2007-06-08
| | | | | | | | | | | | | | | | It turns out that le16_to_cpup() and le32_to_cpup() aren't always safe to call with pointers into packed structures, since those are inlined functions and GCC may lose the "packed" attribute. So those references can become unaligned kernel accesses, which are evil on some hardware. This patch updates uses of those routines in the gadget stack. The references into packed structures can just use leXX_to_cpu(*x), which in most cases is more natural. Some other uses in RNDIS, mostly in debug code, were wrong in the first place; those use get_unaligned(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usblp: Don't let suspend to kill ->usedPete Zaitcev2007-06-08
| | | | | | | | Suspend destroys refcounting for open/release. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: set default y for CONFIG_USB_DEVICE_CLASSKay Sievers2007-06-08
| | | | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: bert hubert <bert.hubert@netherlabs.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: replace flush_workqueue with cancel_sync_workAlan Stern2007-05-29
| | | | | | | | | | | | | | | | | | | | | | | | This patch (as912) replaces a couple of calls to flush_workqueue() with cancel_sync_work() and cancel_rearming_delayed_work(). Using a more directed approach allows us to avoid some nasty deadlocks. The prime example occurs when a first-level device (the parent is a root hub) is removed while at the same time the root hub gets a remote wakeup request. khubd would try to flush the autosuspend workqueue while holding the root-hub's lock, and the remote-wakeup workqueue routine would be waiting to lock the root hub. The patch also reorganizes the power management portion of usb_disconnect(), separating it out into its own routine. The autosuspend workqueue entry is cancelled immediately instead of waiting for the device's release routine. In addition, synchronization with the autosuspend thread is carried out even for root hubs (an oversight in the original code). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@suse.de> Cc: Mark Lord <lkml@rtr.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ehci-fsl: fix cache coherency problem on system with large memoryLi Yang2007-05-23
| | | | | | | | | | | | | | The patch fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=7482. It sets USB snooping on 4G space for PowerPC platforms without CONFIG_NOT_COHERENT_CACHE defined. Reported-by: Stefan Meyer <reyems@telkomsa.net> Signed-off-by: Li Yang <leoli@freescale.com> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: Add support for Olimex arm-usb-ocd JTAG interface serial portTony Lindgren2007-05-23
| | | | | | | | | | | | | | | | This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.html Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add support for Sierra Wireless Aircard 595UDanny Budik2007-05-23
| | | | | | | | | | | | | This patch adds support for the newly released Aircard 595U EVDO modem to the Sierra Wireless driver (sierra.c) in kernel 2.6.21. I suspect that my mailer may be mangling patches so let me know and I'll try to resend it. From: Danny Budik <dbudik@ist-traffic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ldusb bugfixOliver Neukum2007-05-23
| | | | | | | | | This patch fixes a problem reported with consecutive reads in the ldusb driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: Add USB Product Id for OpenDCCGuido Scholz2007-05-23
| | | | | | | | | USB product id registration for the OpenDCC (www.opendcc.de) model railway central unit. Applies to 2.6.21.1. Signed-off-by: Guido Scholz <guido.scholz@bayernline.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix ratelimit call semanticsAlan Stern2007-05-23
| | | | | | | | | | This patch (as910) fixes a ratelimit modification so that the original error-handling path will be followed even when the log-rate limitation kicks in. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-30 19:45:22 -0400