aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAge
* Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman2010-11-30
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into work
| * xhci: Don't let the USB core disable SuperSpeed ports.Sarah Sharp2010-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disabling SuperSpeed ports is a Very Bad Thing (TM). It disables SuperSpeed terminations, which means that devices will never connect at SuperSpeed on that port. For USB 2.0/1.1 ports, disabling the port meant that the USB core could always get a connect status change later. That's not true with USB 3.0 ports. Do not let the USB core disable SuperSpeed ports. We can't rely on the device speed in the port status registers, since that isn't valid until there's a USB device connected to the port. Instead, we use the port speed array that's created from the Extended Capabilities registers. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Don Zickus <dzickus@redhat.com> Cc: stable@kernel.org
| * xhci: Setup array of USB 2.0 and USB 3.0 ports.Sarah Sharp2010-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An xHCI host controller contains USB 2.0 and USB 3.0 ports, which can occur in any order in the PORTSC registers. We cannot read the port speed bits in the PORTSC registers at init time to determine the port speed, since those bits are only valid when a USB device is plugged into the port. Instead, we read the "Supported Protocol Capability" registers in the xHC Extended Capabilities space. Those describe the protocol, port offset in the PORTSC registers, and port count. We use those registers to create two arrays of pointers to the PORTSC registers, one for USB 3.0 ports, and another for USB 2.0 ports. A third array keeps track of the port protocol major revision, and is indexed with the internal xHCI port number. This commit is a bit big, but it should be queued for stable because the "Don't let the USB core disable SuperSpeed ports" patch depends on it. There is no other way to determine which ports are SuperSpeed ports without this patch. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Don Zickus <dzickus@redhat.com> Cc: stable@kernel.org
| * xhci: Fix reset-device and configure-endpoint commandsPaul Zimmerman2010-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have been having problems with the USB-IF Gold Tree tests when plugging and unplugging devices from the tree. I have seen that the reset-device and configure-endpoint commands, which are invoked from xhci_discover_or_reset_device() and xhci_configure_endpoint(), will sometimes time out. After much debugging, I determined that the commands themselves do not actually time out, but rather their completion events do not get delivered to the right place. This happens when the command ring has just wrapped around, and it's enqueue pointer is left pointing to the link TRB. xhci_discover_or_reset_device() and xhci_configure_endpoint() use the enqueue pointer directly as their command TRB pointer, without checking whether it's pointing to the link TRB. When the completion event arrives, if the command TRB is pointing to the link TRB, the check against the command ring dequeue pointer in handle_cmd_in_cmd_wait_list() fails, so the completion inside the command does not get signaled. The patch below fixes the timeout problem for me. This should be queued for the 2.6.35 and 2.6.36 stable trees. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
* | USB: ehci: disable LPM and PPCD for nVidia MCP89 chipsBrian J. Tarricone2010-11-30
| | | | | | | | | | | | | | | | | | | | | | Tested on MacBookAir3,1. Without this, we get EPROTO errors when fetching device config descriptors. Signed-off-by: Brian Tarricone <brian@tarricone.org> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Tested-by: Edgar Hucek <gimli@dark-green.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge branch 'usb-linus' of ↵Linus Torvalds2010-11-23
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: EHCI: fix obscure race in ehci_endpoint_disable USB: gadget: AT91: fix typo in atmel_usba_udc driver USB: isp1362-hcd - fix section mismatch warning USB: EHCI: AMD periodic frame list table quirk USB: OTG: langwell_otg: fix up some sysfs attribute permissions USB: misc: usbsevseg: fix up some sysfs attribute permissions USB: misc: usbled: fix up some sysfs attribute permissions USB: misc: trancevibrator: fix up a sysfs attribute permission USB: misc: cypress_cy7c63: fix up some sysfs attribute permissions USB: storage: sierra_ms: fix sysfs file attribute USB: ehci: fix debugfs 'lpm' permissions USB: atm: ueagle-atm: fix up some permissions on the sysfs files xhci: Fix command ring replay after resume. xHCI: fix wMaxPacketSize mask xHCI: release spinlock when setup interrupt xhci: Remove excessive printks with shared IRQs.
| * USB: EHCI: fix obscure race in ehci_endpoint_disableAlan Stern2010-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1435) fixes an obscure and unlikely race in ehci-hcd. When an async URB is unlinked, the corresponding QH is removed from the async list. If the QH's endpoint is then disabled while the URB is being given back, ehci_endpoint_disable() won't find the QH on the async list, causing it to believe that the QH has been lost. This will lead to a memory leak at best and quite possibly to an oops. The solution is to trust usbcore not to lose track of endpoints. If the QH isn't on the async list then it doesn't need to be taken off the list, but the driver should still wait for the QH to become IDLE before disabling it. In theory this fixes Bugzilla #20182. In fact the race is so rare that it's not possible to tell whether the bug is still present. However, adding delays and making other changes to force the race seems to show that the patch works. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: David Brownell <david-b@pacbell.net> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: isp1362-hcd - fix section mismatch warningAxel Lin2010-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix section mismatch warning by using "__devinit" annotation for isp1362_probe. WARNING: drivers/usb/host/isp1362-hcd.o(.data+0x0): Section mismatch in reference from the variable isp1362_driver to the function .init.text:isp1362_probe() The variable isp1362_driver references the function __init isp1362_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: EHCI: AMD periodic frame list table quirkAndiry Xu2010-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On AMD SB700/SB800/Hudson-2/3 platforms, USB EHCI controller may read/write to memory space not allocated to USB controller if there is longer than normal latency on DMA read encountered. In this condition the exposure will be encountered only if the driver has following format of Periodic Frame List link pointer structure: For any idle periodic schedule, the Frame List link pointers that have the T-bit set to 1 intending to terminate the use of frame list link pointer as a physical memory pointer. Idle periodic schedule Frame List Link pointer shoule be in the following format to avoid the issue: Frame list link pointer should be always contains a valid pointer to a inactive QHead with T-bit set to 0. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: ehci: fix debugfs 'lpm' permissionsGreg Kroah-Hartman2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | The permissions for the lpm debugfs file is incorrect, this fixes it. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alek Du <alek.du@intel.com> Cc: Jacob Pan <jacob.jun.pan@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * xhci: Fix command ring replay after resume.Sarah Sharp2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Andiry's xHCI bus suspend patch introduced the possibly of a host controller replaying old commands on the command ring, if the host successfully restores the registers after a resume. After a resume from suspend, the xHCI driver must restore the registers, including the command ring pointer. I had suggested that Andiry set the command ring pointer to the current command ring dequeue pointer, so that the driver wouldn't have to zero the command ring. Unfortunately, setting the command ring pointer to the current dequeue pointer won't work because the register assumes the pointer is 64-byte aligned, and TRBs on the command ring are 16-byte aligned. The lower seven bits will always be masked off, leading to the written pointer being up to 3 TRBs behind the intended pointer. Here's a log excerpt. On init, the xHCI driver places a vendor-specific command on the command ring: [ 215.750958] xhci_hcd 0000:01:00.0: Vendor specific event TRB type = 48 [ 215.750960] xhci_hcd 0000:01:00.0: NEC firmware version 30.25 [ 215.750962] xhci_hcd 0000:01:00.0: Command ring deq = 0x3781e010 (DMA) When we resume, the command ring dequeue pointer to be written should have been 0x3781e010. Instead, it's 0x3781e000: [ 235.557846] xhci_hcd 0000:01:00.0: // Setting command ring address to 0x3781e001 [ 235.557848] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc900100bc038, 64'h3781e001, 4'hf); [ 235.557850] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc900100bc020, 32'h204, 4'hf); [ 235.557866] usb usb9: root hub lost power or was reset (I can't see the results of this bug because the xHCI restore always fails on this box, and the xHCI driver re-allocates everything.) The fix is to zero the command ring and put the software and hardware enqueue and dequeue pointer back to the beginning of the ring. We do this before the system suspends, to be paranoid and prevent the BIOS from starting the host without clearing the command ring pointer, which might cause the host to muck with stale memory. (The pointer isn't required to be in the suspend power well, but it could be.) The command ring pointer is set again after the host resumes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Andiry Xu <andiry.xu@amd.com>
| * xHCI: fix wMaxPacketSize maskAndiry Xu2010-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB2.0 spec 9.6.6 says: For all endpoints, bit 10..0 specify the maximum packet size(in bytes). So the wMaxPacketSize mask should be 0x7ff rather than 0x3ff. This patch should be queued for the stable tree. The bug in xhci_endpoint_init() was present as far back as 2.6.31, and the bug in xhci_get_max_esit_payload() was present when the function was introduced in 2.6.34. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
| * xHCI: release spinlock when setup interruptAndiry Xu2010-11-11
| | | | | | | | | | | | | | | | | | | | | | Jiri Slaby reports spinlock is held while calling kmalloc(GFP_KERNEL) and request_irq() in xhci_resume(). Release the spinlock when setup interrupt. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * xhci: Remove excessive printks with shared IRQs.Sarah Sharp2010-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the xHCI host controller shares an interrupt line with another device, the xHCI driver needs to check if the interrupt was generated by its hardware. Unfortunately, the user will see a ton of "Spurious interrupt." lines if the other hardware interrupts often. Lawrence found his dmesg output cluttered with this output when the xHCI host shared an interrupt with his i915 hardware. Remove the warning, as sharing an interrupt is a normal thing. This should be applied to the 2.6.36 stable tree. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Lawrence Rust <lvr@softsystem.co.uk> Cc: stable@kernel.org
* | BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann2010-11-17
|/ | | | | | | | | | The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Revert "USB: xhci: Use GFP_ATOMIC under spin_lock"Greg Kroah-Hartman2010-11-11
| | | | | | | | | | | | | | This reverts commit ef821ae70fc35a76bdce7e07c70a1a7c2c33cdb9. The correct thing to do is to drop the spinlock, not change the GFP flag here. Thanks to Sarah for pointing out I shouldn't have taken this patch in the first place. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci-jz4740: Fix spelling in MODULE_ALIASStefan Weil2010-11-11
| | | | | | | | | | platfrom -> platform Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci: Use GFP_ATOMIC under spin_lockDavid Sterba2010-11-11
| | | | | | | | | | | | | | | | | coccinelle check scripts/coccinelle/locks/call_kern.cocci found that in drivers/usb/host/xhci.c an allocation with GFP_KERNEL is done with locks held: xhci_resume spin_lock_irq(xhci->lock) xhci_setup_msix kmalloc(GFP_KERNEL) Change it to GFP_ATOMIC. Signed-off-by: David Sterba <dsterba@suse.cz> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci/mxc: compile fixUwe Kleine-König2010-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 65fd427 (USB: ehci tdi : let's tdi_reset set host mode) broke the build using ARM's mx51_defconfig: CC drivers/usb/host/ehci-hcd.o In file included from drivers/usb/host/ehci-hcd.c:1166: drivers/usb/host/ehci-mxc.c: In function 'ehci_mxc_drv_probe': drivers/usb/host/ehci-mxc.c:192: error: 'ehci' undeclared (first use in this function) drivers/usb/host/ehci-mxc.c:192: error: (Each undeclared identifier is reported only once drivers/usb/host/ehci-mxc.c:192: error: for each function it appears in.) drivers/usb/host/ehci-mxc.c:117: warning: unused variable 'temp' make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1 make[2]: *** [drivers/usb/host/ehci-hcd.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Fix it together with the warning about the unused variable and use msleep instead of mdelay as requested by Alan Stern. Cc: Dinh Nguyen <Dinh.Nguyen@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Nguyen Dinh-R00091 <R00091@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix FSL USB driver on non Open Firmware systemsMarc Kleine-Budde2010-11-11
| | | | | | | | | | | | | | | | Commit 126512e3f274802ca65ebeca8660237f0361ad48 added support for FSL's USB controller on powerpc. In this commit the Open Firmware code was selected and compiled unconditionally. This breaks on ARM systems from FSL which use the same driver (.i.e. the i.MX series), because ARM don't have OF support (yet). This patch fixes the problem by only selecting the OF code on systems with Open Firmware support. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Compile-Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add EHCI and OHCH glue for OCTEON II SOCs.David Daney2010-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2010-10-25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits) sh: i2c-sh7760: Replase from ctrl_* to __raw_* sh: clkfwk: Shuffle around to match the intc split up. sh: clkfwk: modify for_each_frequency end condition sh: fix clk_get() error handling sh: clkfwk: Fix fault in frequency iterator. sh: clkfwk: Add a helper for rate rounding by divisor ranges. sh: clkfwk: Abstract rate rounding helper. sh: clkfwk: support clock remapping. sh: pci: Convert to upper/lower_32_bits() helpers. sh: mach-sdk7786: Add support for the FPGA SRAM. sh: Provide a generic SRAM pool for tiny memories. sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786. sh: pci: Support slot 4 routing on SDK7786. sh: Fix up PMB locking. sh: mach-sdk7786: Add support for fpga gpios. sh: use pr_fmt for clock framework, too. sh: remove name and id from struct clk sh: free-without-alloc fix for sh_mobile_lcdcfb sh: perf: Set up perf_max_events. sh: perf: Support SH-X3 hardware counters. ... Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
| * usb: Fix up r8a66597-hcd section mismatches.Paul Mundt2010-09-16
| | | | | | | | | | | | | | | | | | The _remove() routine is flagged __init_or_module, despite only being used in a __devexit context. As the rest of the driver is already balanced out with __devinit, switch to __devexit and __devexit_p() wrapping. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'for-next' of ↵Linus Torvalds2010-10-24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
| * \ Merge branch 'master' into for-nextJiri Kosina2010-08-11
| |\ \ | | | | | | | | | | | | | | | | Conflicts: fs/exofs/inode.c
| * | | drivers/usb: Remove unnecessary return's from void functionsJoe Perches2010-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Greg prefers this to go through the trivial tree. http://lkml.org/lkml/2010/6/24/1 There are about 2500 void functions in drivers/usb Only a few used return; at end of function. Standardize them a bit. Moved a statement down a line in drivers/usb/host/u132-hcd.c Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | Merge branch 'master' into for-nextJiri Kosina2010-08-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-omap1/board-nokia770.c
| * | | | Fix spelling fuction -> function in commentsStefan Weil2010-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid more patches, I also fixed other spelling and grammar bugs when they were in the same or following line: successfull -> successful parse -> parses controler -> controller controlers -> controllers Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2010-10-22
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits) USB: mct_u232: fix broken close USB: gadget: amd5536udc.c: fix error path USB: imx21-hcd - fix off by one resource size calculation usb: gadget: fix Kconfig warning usb: r8a66597-udc: Add processing when USB was removed. mxc_udc: add workaround for ENGcm09152 for i.MX35 USB: ftdi_sio: add device ids for ScienceScope USB: musb: AM35x: Workaround for fifo read issue USB: musb: add musb support for AM35x USB: AM35x: Add musb support usb: Fix linker errors with CONFIG_PM=n USB: ohci-sh - use resource_size instead of defining its own resource_len macro USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro USB: xhci: Fix compile error when CONFIG_PM=n USB: accept some invalid ep0-maxpacket values USB: xHCI: PCI power management implementation USB: xHCI: bus power management implementation USB: xHCI: port remote wakeup implementation USB: xHCI: port power management implementation ... Manually fix up (non-data) conflict: the SCSI merge gad renamed the 'hw_sector_size' member to 'physical_block_size', and the USB tree brought a new use of it.
| * | | | | USB: imx21-hcd - fix off by one resource size calculationAxel Lin2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Jon Povey <Jon.Povey@racelogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | usb: Fix linker errors with CONFIG_PM=nSarah Sharp2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix these linker errors when CONFIG_PM=n: ERROR: "xhci_bus_resume" [drivers/usb/host/xhci-hcd.ko] undefined! ERROR: "xhci_bus_suspend" [drivers/usb/host/xhci-hcd.ko] undefined! Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: ohci-sh - use resource_size instead of defining its own resource_len macroAxel Lin2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: isp1362-hcd - use resource_size instead of defining its own ↵Axel Lin2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | resource_len macro Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: isp116x-hcd - use resource_size instead of defining its own ↵Axel Lin2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | resource_len macro Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: xhci: Fix compile error when CONFIG_PM=nSarah Sharp2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix this error when CONFIG_PM is not enabled: drivers/usb/host/xhci.c:675: error: implicit declaration of function 'usb_root_hub_lost_power' Wrap xhci_suspend() and xhci_resume() into an ifdef CONFIG_PM, along with the functions that only they call -- xhci_save_registers() and xhci_restore_registers(). Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: xHCI: PCI power management implementationAndiry Xu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the PCI suspend/resume. Please refer to xHCI spec for doing the suspend/resume operation. For S3, CSS/SRS in USBCMD is used to save/restore the internal state. However, an error maybe occurs while restoring the internal state. In this case, it means that HC internal state is wrong and HC will be re-initialized. Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: Dong Nguyen <dong.nguyen@amd.com> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: xHCI: bus power management implementationAndiry Xu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements xHCI bus suspend/resume function hook. In the patch it goes through all the ports and suspend/resume the ports if needed. If any port is in remote wakeup, abort bus suspend as what ehci/ohci do. Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: xHCI: port remote wakeup implementationAndiry Xu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit implements port remote wakeup. When a port is in U3 state and resume signaling is detected from a device, the port transitions to the Resume state, and the xHC generates a Port Status Change Event. For USB3 port, software write a '0' to the PLS field to complete the resume signaling. For USB2 port, the resume should be signaling for at least 20ms, irq handler set a timer for port remote wakeup, and then finishes process in hub_control GetPortStatus. Some codes are borrowed from EHCI code. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: xHCI: port power management implementationAndiry Xu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add software trigger USB device suspend resume function hook. Do port suspend & resume in terms of xHCI spec. Port Suspend: Stop all endpoints via Stop Endpoint Command with Suspend (SP) flag set. Place individual ports into suspend mode by writing '3' for Port Link State (PLS) field into PORTSC register. This can only be done when the port is in Enabled state. When writing, the Port Link State Write Strobe (LWS) bit shall be set to '1'. Allocate an xhci_command and stash it in xhci_virt_device to wait completion for the last Stop Endpoint Command. Use the Suspend bit in TRB to indicate the Stop Endpoint Command is for port suspend. Based on Sarah's suggestion. Port Resume: Write '0' in PLS field, device will transition to running state. Ring an endpoints' doorbell to restart it. Ref: USB device remote wake need another patch to implement. For details of how USB subsystem do power management, please see: Documentation/usb/power-management.txt Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: core: use kernel assigned address for devices under xHCIAndiry Xu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xHCI driver uses hardware assigned device address. This may cause device address conflict in certain cases. Use kernel assigned address for devices under xHCI. Store the xHC assigned address locally in xHCI driver. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | | | USB: xHCI: change xhci_reset_device() to allocate new deviceAndiry Xu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename xhci_reset_device() to xhci_discover_or_reset_device(). If xhci_discover_or_reset_device() is called to reset a device which does not exist or does not match the udev, it calls xhci_alloc_dev() to re-allocate the device. This would prevent the reset device failure, possibly due to the xHC restore error during S3/S4 resume. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: xHCI: Add pointer to udev in struct xhci_virt_deviceAndiry Xu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a pointer to udev in struct xhci_virt_device. When allocate a new virt_device, make the pointer point to the corresponding udev. Modify xhci_check_args(), check if virt_dev->udev matches the target udev, to make sure command is issued to the right device. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | usb: r8a66597-hcd: Change mistake of the outsw functionNobuhiro Iwamatsu2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some functions changed by 1c98347e613bf17ea2f18c9766ce0ab77f65a96d. However, There was a change mistake of the function (outsw). Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Paul Mundt <lethal@linux-sh.org> Cc: stable <stable@kernel.org> [.35 & .36] Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | usb: makefile cleanupmatt mooney2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: imx21-hcd accept arbitary transfer buffer alignement.Martin Fuzzey2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware can only do DMA to 4 byte aligned addresses. When this requirement is not met use PIO or a bounce buffer. PIO is used when the buffer is small enough to directly use the hardware data memory (2*maxpacket). A bounce buffer is used for larger transfers. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: imx21-hcd: Fix isochronous endpoint idleMartin Fuzzey2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release the hardware resources and reset the internal HCD state associated with an isochronous endpoint when the last URB queued for it completes. Previously this was only done in then endpoint_disable() method causing usbtest 15 and 16 to hang when run twice in succession without a disconnect. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: imx21-hcd: refactor hardware data memory managementMartin Fuzzey2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already have fields describing the hardware data memory (dmem_size and dmem_offset) in the HCD private data, use them rather than the rather obscure read from the hardware descriptor. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: imx21-hcd: remove unused variableMartin Fuzzey2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove a local variable left over from some debugging code. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: UHCI: add native scatter-gather support(v1)Ming Lei2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds native scatter-gather support to uhci-hcd. Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: add USB EHCI support for MPC5121 SoCAnatolij Gustschin2010-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extends FSL EHCI platform driver glue layer to support MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI registers are in big endian format. The appropriate flags are set using the information in the platform data structure. MPC83xx system interface registers are not available on MPC512x, so the access to these registers is isolated in MPC512x case. Furthermore the USB controller clocks must be enabled before 512x register accesses which is done by providing platform specific init callback. The MPC512x internal USB PHY doesn't provide supply voltage. For boards using different power switches allow specifying DRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal PHY using "fsl,invert-drvvbus" and "fsl,invert-pwr-fault" properties in the device tree USB nodes. Adds documentation for this new device tree bindings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-14 11:15:13 -0500