aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAge
* EHCI: fix remote wakeup regression in 2.6.21-rcAlan Stern2007-04-11
| | | | | | | | | | | | | | | | | There is one significant difference between the behavior of root hubs (as embodied in host controller hardware) and external hubs: When a remote-wakeup signal is received, an external hub sends an interrupt message at the _end_ of the resume sequence but a root hub generates and interrupt at the _beginning_ of the resume sequence. The host system must poll for the end of the sequence. When ehci-hcd was converted to interrupt-driven operation instead of using polling, the remaining need for this particular poll was overlooked. This patch (as894) fixes the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: Fix problem caused by lack of terminating QHAlan Stern2007-03-26
| | | | | | | | | | | | | | This patch (as871) fixes a problem introduced by an earlier change. It turns out that some systems really do need to have a terminating skeleton QH present whenever FSBR is on. I don't know any way to tell which systems do need it and which don't; the easiest answer is to have it there always. This fixes the NumLock-hang bug reported by Jiri Slaby. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix Unaligned access in EHCI driverMax Dmitrichenko2007-03-09
| | | | | | | | | | | | | | I get following warnings on spar64: Kernel unaligned access at TPC[1000c9e4] ehci_hub_control+0x54c/0x68c [ehci_hcd] Despite of the comment in the patched code, the type cast used there does make unaligned access. The fix was made as it's done in ohci-hub.c. Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: fix port resume problemAlan Stern2007-03-09
| | | | | | | | | | | | | This patch (as863) fixes a problem encountered sometimes when resuming a port on a UHCI controller. The hardware may turn off the Resume-Detect bit before turning off the Suspend bit, leading usbcore to think that the port is still suspended and the resume has failed. The patch makes uhci_finish_suspend() wait until both bits are safely off. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: Eliminate asynchronous skeleton Queue HeadersAlan Stern2007-02-23
| | | | | | | | | | | | | | | | | | This patch (as856) attempts to improve the performance of uhci-hcd by removing the asynchronous skeleton Queue Headers. They don't contain any useful information but the controller has to read through them at least once every millisecond, incurring a non-zero DMA overhead. Now all the asynchronous queues are combined, along with the period-1 interrupt queue, into a single list with a single skeleton QH. The start of the low-speed control, full-speed control, and bulk sublists is determined by linear search. Since there should rarely be more than a couple of QHs in the list, the searches should incur a much smaller total load than keeping the skeleton QHs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: Add macros for computing DMA valuesAlan Stern2007-02-23
| | | | | | | | | This patch (as855) adds some convenience macros to uhci-hcd, to help simplify the code for computing hardware DMA pointers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2007-02-19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) Documentation/kernel-docs.txt update. arch/cris: typo in KERN_INFO Storage class should be before const qualifier kernel/printk.c: comment fix update I/O sched Kconfig help texts - CFQ is now default, not AS. Remove duplicate listing of Cris arch from README kbuild: more doc. cleanups doc: make doc. for maxcpus= more visible drivers/net/eexpress.c: remove duplicate comment add a help text for BLK_DEV_GENERIC correct a dead URL in the IP_MULTICAST help text fix the BAYCOM_SER_HDX help text fix SCSI_SCAN_ASYNC help text trivial documentation patch for platform.txt Fix typos concerning hierarchy Fix comment typo "spin_lock_irqrestore". Fix misspellings of "agressive". drivers/scsi/a100u2w.c: trivial typo patch Correct trivial typo in log2.h. Remove useless FIND_FIRST_BIT() macro from cardbus.c. ...
| * Replace remaining references to "driverfs" with "sysfs".Robert P. J. Day2007-02-17
| | | | | | | | | | | | | | Globally, s/driverfs/sysfs/g. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | USB: at91-ohci, handle extra at91sam9261 ahb clockAndrew Victor2007-02-16
| | | | | | | | | | | | | | | | | | | | | | | | The AT91SAM9261 needs to activate an AHB clock (HCK0) to use the USB Host controller. Previously clock.c would just enable it at startup, but now all the unused clocks are automatically disabled. Based on patch from Nicolas Ferre. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: change __init to __devinit for isp116x_probePrarit Bhargava2007-02-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change __init to __devinit for isp116x_probe. Resolves MODPOST warning: WARNING: drivers/usb/host/isp116x-hcd.o - Section mismatch: reference to .init.text:isp116x_probe from .data.rel.local between 'isp116x_driver' (at offset 0x0) and 'isp116x_hc_driver' Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: ps3: don't call ps3_system_bus_driver_register on other platformsIshizaki Kou2007-02-16
| | | | | | | | | | | | | | | | | | | | | | | | ps3_system_bus_driver_register is PS3 platform specific function. On other platforms, it triggers WARN_ON in kref_get. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | EHCI: add debugging message to ehci_bus_suspendAlan Stern2007-02-16
| | | | | | | | | | | | | | | | | | | | This patch (as848) adds a useful little debugging message to let us know when ehci-hcd's bus_suspend method runs. The other HCDs have similar messages; now ehci-hcd doesn't need to feel left out. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | EHCI: turn off remote wakeup during shutdownAlan Stern2007-02-16
|/ | | | | | | | | | | | This patch (as850b) disables remote wakeup (and everything else!) on all EHCI ports when the shutdown() method is called. If remote wakeup is left active then some systems will reboot instead of powering off. This fixes Bugzilla #7828. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner2007-02-14
| | | | | | | | | | | | | | | | | | | | | | The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().Robert P. J. Day2007-02-11
| | | | | | | | | | | | | | | | | | | | | | Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the corresponding "kmem_cache_zalloc()" call. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Roland McGrath <roland@redhat.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Acked-by: Joel Becker <Joel.Becker@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jan Kara <jack@ucw.cz> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] hci_{read,write}l() does force casts to wrong type for no reasonAl Viro2007-02-09
| | | | | | | readl() et.al. expect iomem pointer, so WTF force-cast it to normal one??? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] ps3 usb missed the addition of new argument to ps3_alloc_io_irq()Al Viro2007-02-09
| | | | | | Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* EHCI: fix interrupt-driven remote wakeupAlan Stern2007-02-07
| | | | | | | | | | | | | | | | | | | Now that port status change notifications are interrupt-driven, ehci-hcd needs to tell usbcore when a remote-wakeup resume operation is finished -- we can no longer rely on the core to poll and find out. This patch (as843) uses the root-hub status timer to force a poll after the resume is complete. The patch also changes the test for detecting when the TDRSMDN resume period has expired. It's necessary to use time_after_eq() instead of time_after(), since the polling is triggered precisely by a timer. The same change is made for TDRSTR reset expiration, for consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: switch ehci-hcd to new polling schemeMarcelo Tosatti2007-02-07
| | | | | | | | | | | | | | | | Switch ehci-hcd to use the new polling scheme, which reports root hub status changes via the interrupt handler, in an asynchronous fashion. Doing so disables polling for status changes (whose handler is rh_timer_func). Tested on a Geode GX machine, which is now capable of running at =~ 5 timer interrupts per second (in the -rt tree), resulting in significant power savings. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: force high-speed devices to run at full speedAlan Stern2007-02-07
| | | | | | | | | | | | | | | | | | | | This patch (as710) adds a sysfs class-device attribute file named "companion" for EHCI controllers. The file contains a list of port numbers that are dedicated to the companion controller; by writing a port number to the file the user can force a high-speed device attached directly to the computer to run at full speed. (As far as I know it is not possible to do this for a device attached to an external hub.) A port is removed from the file by writing the negative of its port number. Several users have asked for this facility and it seems like a useful thing to have. Every now and then one runs across a device which behaves much better at full speed than at high speed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: don't hide ports owned by the companionAlan Stern2007-02-07
| | | | | | | | | | | | | | This patch (as709) changes the way ehci-hcd presents port status values for ports owned by the companion controller. It no longer hides the information; in particular, it allows the core to see the disconnect event that occurs when a full- or low-speed device is switched over to the companion. This is required for the next patch in this series. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: local variable for port status registerAlan Stern2007-02-07
| | | | | | | | | | | | This patch (as708) introduces a local variable to hold the port status-register address in ehci-hub.c. There's not much improvement in the object code, but it sure is a lot easier to read. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: fix bandwidth allocationAlan Stern2007-02-07
| | | | | | | | | This patch (as840) fixes the bandwidth allocation mechanism in uhci-hcd. It has never worked correctly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ps3 ohci bus glueGeoff Levand2007-02-07
| | | | | | | | | USB OHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci error handling cleanupBenjamin Herrenschmidt2007-02-07
| | | | | | | | | | | | | Restructure the ohci_hcd_mod_init error handling code in to better support the multiple platform drivers. This does not change the functionality. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ps3 ehci bus glueGeoff Levand2007-02-07
| | | | | | | | | | USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci-at91 refcount fix for irq wake enablesMarc Pignat2007-02-07
| | | | | | | | | | | | | | | | | | The attached patch fixes the unbalanced calls to enable_irq_wake() and disable_irq_wake() in the AT91 USB Host driver. It should resolve these kernel messages: Unbalanced IRQ x wake disable BUG: warning at kernel/irq/manage.c:167/set_irq_wake() (The original code was debugged before a bug in the genirq wakeup irq logic was fixed by adding the IRQ wake enable/disable refcounting. Not all code yet uses the bugfixed model.) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: no dummy TDs for Iso QHsAlan Stern2007-02-07
| | | | | | | | | | | | | Isochronous queues don't need a dummy TD because the Queue Header isn't managed by the hardware. This patch (as836) removes the unnecessary dummy TDs. The patch also fixes a long-standing typo in a comment (a "don't" was missing -- potentially very confusing!). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: improved debugging checks for the frame listAlan Stern2007-02-07
| | | | | | | | | | | | | This patch (as768) improves the debugging checks for the uhci-hcd frame list. The number of entries displayed is limited to 10, and the driver now checks for the correct Skeleton QH link value at the end of each chain of Isochronous TDs. The code to compute these link values is now used in two spots, so it is moved into its own separate subroutine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ohci: Add support for OHCI controller on the of_platform busSylvain Munaut2007-02-07
| | | | | | | | | | | PPC embedded systems can have a ohci controller builtin. In the new model, it will end up as a driver on the of_platform bus, this patches takes care of them. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ohci: Rework bus glue integration to allow several at onceSylvain Munaut2007-02-07
| | | | | | | | | | | | | | | | | The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix EHCI warningBenjamin Herrenschmidt2007-02-07
| | | | | | | | | | This patch fixes a warning introduced by the big endian MMIO EHCI support patch on platforms that don't have readl_be/writel_be variants (though mostly harmless as those are called in an if (0) statement, but gcc still warns). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* USB: Fix OHCI warningBenjamin Herrenschmidt2007-02-07
| | | | | | | | | | | This patch fixes a warning introduces by the split endian OHCI support patch on platforms that don't have readl_be/writel_be variants (though mostly harmless as those are called in an if (0) statement, but gcc still warns). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Implement support for EHCI with big endian MMIOBenjamin Herrenschmidt2007-02-07
| | | | | | | | | | | | | | | | | | This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Implement support for "split" endian OHCIBenjamin Herrenschmidt2007-02-07
| | | | | | | | | | | | | | | This patch separates support for big endian MMIO register access and big endian descriptors in order to support the Toshiba SCC implementation which has big endian registers but little endian in-memory descriptors. It simplifies the access functions a bit in ohci.h while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Rework the OHCI quirk mecanism as suggested by DavidBenjamin Herrenschmidt2007-02-07
| | | | | | | | | | | | | | | | This patch applies David Brownell's suggestion for reworking the OHCI quirk mechanism via a table of PCI IDs. It adapts the existing quirks to use that mechanism. This also moves the quirks to reset() as suggested by the comment in there. This is necessary as we need to have the endian properly set before we try to init the controller. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix for typo in ohci-ep93xx.cPetr Stetiar2007-01-22
| | | | | | | | | | Attached patch fixes typo in USB driver reported by Chase Douglas on linux-cirrus mailing list. http://www.freelists.org/archives/linux-cirrus/12-2006/msg00003.html Signed-off-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: support device_may_wakeupAlan Stern2007-01-05
| | | | | | | | | This patch (as831) adds device_may_wakeup() support to uhci-hcd; it has been lacking for a long time. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: make test for ASUS motherboard more specificAlan Stern2007-01-05
| | | | | | | | | | | | | | Instead of matching all motherboards whose name contains "A7V8X" for a remote-wakeup hardware bug, this patch (as829) matches only those boards whose name is exactly equal to "A7V8X". Later motherboards don't seem to have the bug. (In fact, it's possible that only one motherboard in the world has the bug. With only one user reporting problems, it's hard to tell.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: u132-hcd/ftdi-elan: add support for Option GT 3G Quad cardTony Olech2006-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELAN's U132 is a USB to CardBus OHCI controller adapter, designed specifically for CardBus 3G data cards to function in machines without a CardBus slot. The "ftdi-elan" module is a USB client driver, that detects a supported CardBus OHCI controller plugged into the U132 adapter and thereafter provides the conduit for for access by the "u132-hcd" module. The "u132-hcd" module is a (cut-down OHCI) host controller that supports a single OHCI function of the CardBus card inserted into the U132 adapter. The problem with the initial implementation is that when the CardBus card inserted into the U132 adapter has multiple functions (and a CardBus card can support up to 4 functions), it was the first function that was arbitrarily choosen. The first batch of 3G cards tested, like the Merlin Qualcomm V620, have two functions each supporting a seperate USB OHCI host controller, of which it was that first function that is wired up to the 3G modem. Then along comes the Vodafone Mobile Connect 3G/GPRS data card, aka "Option GT 3G Quad" as printed on it's rear or "Option N.V. GlobeTrotter Fusion Quad Lite" as read with "lspci -v". And it has the meaningful functionality in the second CardBus function. That presents a problem because it was the "ftdi-elan" module alone that knows how to communicate to the embedded CardBus slot and the "u132-hcd" module alone that knows how to access the pcmcia configuration and CardBus accessible memory space. And of course, the information about attached (internally hardwired) devices is contained within USB configuration embedded somewhere within the CardBus card. If only the "u132-hcd" module probe() interface could return a result code that propagated back to the instigating function platform_device_register() then the "ftdi-elan" module could try an alternative CardBus function. However in spite of the recent changes to the drivers/base/ routines that moved device_attach() from bus_add_device() to bus_attach_device() both of those routines lose the "failed to attach" 0 result code and thus the calling routine, namely device_add() is incapable of propaging the "failed to attach" condition back to platform_device_add() and consequently back to the caller of platform_device_register() Experiments show that patching bus_attach_device() to return ENODEV fails with the kernel locking up very early during boot. But, however, if the patch is restricted to calls from platform_device_add() then it does seem to work. Unfortunately, until the kernel's drivers/base is properly modified to propagate -ENODEV back to the caller of platform_device_register(), it is necessary to "fix" the "ftdi-elan" module by importing knowledge from the "u132-hcd" module. This is the reason for the duplicated functionality introduced in this patch. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: OHCI support for PNX8550Vitaly Wool2006-12-20
| | | | | | | | | OHCI HCD (Host Controller Driver) for USB. Bus Glue for PNX8550. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci handles hardware faults during root port resetsTakamasa Ohtake2006-12-20
| | | | | | | | | | | | | | | | | | | | I have found a problem where the root_port_reset() goes into an infinite loop and stalls the kernel. This happens when a hardware fault inside the machine occurs during a small timing window. In case of USB device connection, if a USB device responds to hcd_submit_urb(), and later the controller fails before root_port_reset(), root_port_reset() will loop infinitely because ohci_readl() will always return "-1". Such a failure can include ejecting a CardBus OHCI controller. The probability of this problem is low, but it will increase if PnP type usage is frequent. The attached patch can solve this problem and I believe that it is better to fix this problem. Signed-off-by: Takamasa Ohtake <ohtake-txa@necst.nec.co.jp> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci at91 warning fixAndrew Victor2006-12-20
| | | | | | | | | Remove a warning about an unused variable in the OHCI bus glue for at91. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci whitespace/comment fixupsDavid Brownell2006-12-20
| | | | | | | | | This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace (space before tab, at end of line) as well as the obsolete inline changelog. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: module parameter to ignore overcurrent changesAlan Stern2006-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spamming syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short-circuited cables. In addition, controllers with no devices attached will be forced to poll for new devices rather than relying on interrupts, since each overcurrent event would generate a new interrupt. This patch (as826) is essentially a copy of David Brownell's ignore_oc patch for ehci-hcd, ported to uhci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix ohci.h over-use warningsJeff Garzik2006-12-20
| | | | | | | | | | | | | | | | | When u132-hcd is built, it includes local header ohci.h, which appears to have been intended only for use by ohci-hcd. This throws warnings about functions which are defined and not used. The warnings thrown are because three small functions are implemented in the header, but not declared 'inline', a rather strange affair. Since these functions are small, let's go ahead and define them as 'inline', just like the inline functions surrounding them. This makes things more consistent, and kills the warnings. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-12-07
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits) [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked [ARM] 4001/1: S3C24XX: shorten reboot time [ARM] 3983/2: remove unused argument to __bug() [ARM] 4000/1: Osiris: add third serial port in [ARM] 3999/1: RX3715: suspend to RAM support [ARM] 3998/1: VR1000: LED platform devices [ARM] 3995/1: iop13xx: add iop13xx support [ARM] 3968/1: iop13xx: add iop13xx_defconfig [ARM] Update mach-types [ARM] Allow gcc to optimise arm_add_memory a little more [ARM] 3991/1: i.MX/MX1 high resolution time source [ARM] 3990/1: i.MX/MX1 more precise PLL decode [ARM] 3986/1: H1940: suspend to RAM support [ARM] 3985/1: ixp4xx clocksource cleanup [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2) [ARM] 3994/1: ixp23xx: fix handling of pci master aborts [ARM] 3981/1: sched_clock for PXA2xx [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter ...
| * [ARM] 3963/1: AT91: Update configuration filesAndrew Victor2006-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 13:39:50 -0500