aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/uhci-hcd.c
Commit message (Collapse)AuthorAge
* USB: remove fake "address-of" expressionsAlan Stern2010-08-10
| | | | | | | | | | Fake "address-of" expressions that evaluate to NULL generally confuse readers and can provoke compiler warnings. This patch (as1412) removes three such fake expressions, using "#ifdef"s in their place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: add support for Intel's wakeup flagsAlan Stern2010-08-10
| | | | | | | | | | | | | This patch (as1396) adds code to uhci-hcd to support the vendor-specific wakeup settings found in Intel's ICHx hardware. A couple of unnecessary memory barriers are removed. And the root hub isn't put back into the "suspended" state if power was lost during a system sleep -- there's not much point in doing so because the root hub will be resumed shortly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: controller resume should check the root hubAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | This patch (as1394) adds code to ehci-hcd, ohci-hcd, and uhci-hcd for automatically resuming the root hub when the controller is resumed, if the root hub has a wakeup request pending on some port. During resume from system sleep this doesn't matter, because the root hubs will naturally be resumed along with every other device in the system. However it _will_ matter for runtime PM: If the controller is suspended and a remote wakeup request is received then the controller will autoresume, but we need to ensure that the root hub also autoresumes. Otherwise the wakeup request would be ignored, the controller would go back to sleep, and the cycle would repeat a large number of times (I saw this happen before the patch was written). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add do_wakeup parameter for PCI HCD suspendAlan Stern2010-08-10
| | | | | | | | | | | | | This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend method used by PCI-based host controller drivers. ehci-hcd in particular needs to know whether or not to enable wakeup when suspending a controller. Although that information is currently available through device_may_wakeup(), when support is added for runtime suspend this will no longer be true. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: convert usb_hcd bitfields into atomic flagsAlan Stern2010-08-10
| | | | | | | | | | | | | | | | | | | This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: acquire spinlock before calling start_rh()Alan Stern2010-08-10
| | | | | | | | | | | | | | | | | | This patch (as1392) fixes a bug in uhci-hcd: The start_rh() routine is supposed to be called with the private spinlock held. If an IRQ comes in at just the wrong time, the driver will think the controller has died when in fact it simply hasn't start yet. The patch also addresses some issues that may prevent an URB from being unlinked after the controller has stopped. This is an abnormal occurrence (ordinarily the controller stops only when the entire bus is suspended and hence there are no active URBs), so the pathways haven't gotten much testing. These two changes may be a little more than is strictly necessary, but clearly they won't hurt. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: make hcd.h public (drivers dependency)Eric Lescouet2010-05-20
| | | | | | | | | | | | | The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix crash in uhci_scan_schedulePete Zaitcev2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When hardware is removed on a Stratus, the system may crash like this: ACPI: PCI interrupt for device 0000:7c:00.1 disabled Trying to free nonexistent resource <00000000a8000000-00000000afffffff> Trying to free nonexistent resource <00000000a4800000-00000000a480ffff> uhci_hcd 0000:7e:1d.0: remove, state 1 usb usb2: USB disconnect, address 1 usb 2-1: USB disconnect, address 2 Unable to handle kernel paging request at 0000000000100100 RIP: [<ffffffff88021950>] :uhci_hcd:uhci_scan_schedule+0xa2/0x89c #4 [ffff81011de17e50] uhci_scan_schedule at ffffffff88021918 #5 [ffff81011de17ed0] uhci_irq at ffffffff88023cb8 #6 [ffff81011de17f10] usb_hcd_irq at ffffffff801f1c1f #7 [ffff81011de17f20] handle_IRQ_event at ffffffff8001123b #8 [ffff81011de17f50] __do_IRQ at ffffffff800ba749 This occurs because an interrupt scans uhci->skelqh, which is being freed. We do the right thing: disable the interrupts in the device, and do not do any processing if the interrupt is shared with other source, but it's possible that another CPU gets delayed somewhere (e.g. loops) until we started freeing. The agreed-upon solution is to wait for interrupts to play out before proceeding. No other bareers are neceesary. A backport of this patch was tested on a 2.6.18 based kernel. Testing of 2.6.32-based kernels is under way, but it takes us forever (months) to turn this around. So I think it's a good patch and we should keep it. Tracked in RH bz#516851 Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI & UHCI: fix race between root-hub suspend and port resumeAlan Stern2010-01-20
| | | | | | | | | | | | | | | This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* debugfs: Modified default dir of debugfs for debugging UHCI.GeunSik Lim2009-09-15
| | | | | | | | | | | | Change default debugfs directory as mounting point for debugging UHCI(Universal Host Controller Interface driver) for USB. As we all know, We need change default directory for consistency of debugfs by Greg K-H Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: new flag for resume-from-hibernationAlan Stern2009-06-16
| | | | | | | | | | | | | | | | | | | | | This patch (as1237) changes the way the PCI host controller drivers avoid retaining bogus hardware states during resume-from-hibernation. Previously we had reset the hardware as part of preparing to reinstate the memory image. But we can do better now with the new PM framework, since we know exactly which resume operations are from hibernation. The pci_resume method is changed to accept a flag indicating whether the system is resuming from hibernation. When this flag is set, the drivers will reset the hardware to get rid of any existing state. Similarly, the pci_suspend method is changed to remove the pm_message_t argument. It's no longer needed, since no special action has to be taken when preparing to reinstate the memory image. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: move PCI host controllers to new PM frameworkAlan Stern2009-06-16
| | | | | | | | | | This patch (as1236) converts the USB PCI power management routines over to the new PM framework. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: use the new usb debugfs directoryGreg Kroah-Hartman2009-06-16
| | | | | | | | All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB/PCI: Fix resume breakage of controllers behind cardbus bridgesRafael J. Wysocki2009-02-17
| | | | | | | | | | | | | | | | | | | | | If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: Fix suspend-resume of PCI USB controllersRafael J. Wysocki2009-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 (USB: fix up suspend and resume for PCI host controllers) attempted to fix the suspend-resume of PCI USB controllers, but unfortunately it did that incorrectly and interrupts are left enabled by the USB controllers' ->suspend_late() callback as a result. This leads to serious problems during suspend which are very difficult to debug. Fix the issue by removing the ->suspend_late() callback of PCI USB controllers and moving the code from there to the ->suspend() callback executed with interrupts enabled. Additionally, make the ->resume() callback of PCI USB controllers execute pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the full power state (PCI_D0). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: "Jeff Chua" <jeff.chua.linux@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Zdenek Kabelac" <zdenek.kabelac@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix up suspend and resume for PCI host controllersAlan Stern2009-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1192) rearranges the USB PCI host controller suspend and resume and resume routines: Use pci_wake_from_d3() for enabling and disabling wakeup, instead of pci_enable_wake(). Carry out the actual state change while interrupts are disabled. Change the order of the preparations to agree with the general recommendation for PCI devices, instead of messing around with the wakeup settings while the device is in D3. In .suspend: Call the underlying driver to disable IRQ generation; pci_wake_from_d3(device_may_wakeup()); pci_disable_device(); In .suspend_late: pci_save_state(); pci_set_power_state(D3hot); (for PPC_PMAC) Disable ASIC clocks In .resume_early: (for PPC_PMAC) Enable ASIC clocks pci_set_power_state(D0); pci_restore_state(); In .resume: pci_enable_device(); pci_set_master(); pci_wake_from_d3(0); Call the underlying driver to reenable IRQ generation Add the necessary .suspend_late and .resume_early method pointers to the PCI host controller drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: log a warning if ehci-hcd is not loaded firstAlan Stern2008-10-17
| | | | | | | | | | | | This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI, OHCI, UHCI: remove version numbersAlan Stern2008-10-17
| | | | | | | | | | | This patch (as1145) removes the essentially useless driver-version strings from ehci-hcd, ohci-hcd, and uhci-hcd. It also unifies the form of the banner lines they display upon loading and adds a missing test for usb_disabled() to ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: UHCI: disable remote wakeup when it's not neededAlan Stern2008-05-02
| | | | | | | | | | | | | | | | | This patch (as1084b) fixes the way uhci-hcd handles polling and remote wakeups for its root hubs. When remote wakeup is disabled, neither interrupts nor polling should be enabled during a root-hub suspend. Likewise, if interrupts are enabled during suspend then polling isn't needed. Furthermore the EGSM (Enter Global Suspend Mode) bit shouldn't be set in the Command register unless remote wakeup is enabled. Apparently some controllers will issue a remote-wakeup interrupt whenever EGSM is on, even if Resume-Detect interrupts are supposedly disabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-25
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: HCDs use the do_remote_wakeup flagAlan Stern2008-04-25
| | | | | | | | | | | | | | | | | | | | | | | | When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: clarify usage of hcd->suspend/resume methodsAlan Stern2008-04-25
| | | | | | | | | | | | | | | The .suspend and .resume method pointers in struct usb_hcd have not been fully understood by host-controller driver writers. They are meant for use with PCI controllers; other platform-specific drivers generally should not refer to them. To try and clarify matters, this patch (as1065) renames those methods to .pci_suspend and .pci_resume. It eliminates corresponding dead code and bogus references in the ohci-ssb and u132-hcd drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: use IRQF_DISABLED for HCD interrupt handlersAlan Stern2007-12-17
| | | | | | | | | | | | | | | | Host controller IRQs are supposed to be serviced with interrupts disabled. This patch (as1026) adds an IRQF_DISABLED flag to all the controller drivers that lack it. It also replaces the spin_lock_irqsave() and spin_unlock_irqrestore() calls in uhci_irq() with simple spin_lock() and spin_unlock(). This fixes Bugzilla #9335. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/firmware: const-ify DMI API and internalsJeff Garzik2007-10-09
| | | | | | | | | | | | | | | | | | | | | | | Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* mm: Remove slab destructors from kmem_cache_create().Paul Mundt2007-07-19
| | | | | | | | | | | | | | Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* USB: Don't resume root hub if the controller is suspendedAlan Stern2007-07-12
| | | | | | | | | | | | | | | | | | | Root hubs can't be resumed if their parent controller device is still suspended. This patch (as925) adds a check for that condition in hcd_bus_resume() and prevents it from being treated as a fatal controller failure. ehci-hcd is updated to add the corresponding test. Unnecessary debugging messages are removed from uhci-hcd and dummy-hcd. The error return code from dummy-hcd is changed to -ESHUTDOWN, the same as the others. ohci-hcd doesn't need any changes. Suspend handling in the non-PCI host drivers is somewhat hit-and-miss. This patch shouldn't have any effect on them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: Fix problem caused by lack of terminating QHAlan Stern2007-03-26
| | | | | | | | | | | | | | This patch (as871) fixes a problem introduced by an earlier change. It turns out that some systems really do need to have a terminating skeleton QH present whenever FSBR is on. I don't know any way to tell which systems do need it and which don't; the easiest answer is to have it there always. This fixes the NumLock-hang bug reported by Jiri Slaby. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: Eliminate asynchronous skeleton Queue HeadersAlan Stern2007-02-23
| | | | | | | | | | | | | | | | | | This patch (as856) attempts to improve the performance of uhci-hcd by removing the asynchronous skeleton Queue Headers. They don't contain any useful information but the controller has to read through them at least once every millisecond, incurring a non-zero DMA overhead. Now all the asynchronous queues are combined, along with the period-1 interrupt queue, into a single list with a single skeleton QH. The start of the low-speed control, full-speed control, and bulk sublists is determined by linear search. Since there should rarely be more than a couple of QHs in the list, the searches should incur a much smaller total load than keeping the skeleton QHs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: Add macros for computing DMA valuesAlan Stern2007-02-23
| | | | | | | | | This patch (as855) adds some convenience macros to uhci-hcd, to help simplify the code for computing hardware DMA pointers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* UHCI: improved debugging checks for the frame listAlan Stern2007-02-07
| | | | | | | | | | | | | This patch (as768) improves the debugging checks for the uhci-hcd frame list. The number of entries displayed is limited to 10, and the driver now checks for the correct Skeleton QH link value at the end of each chain of Isochronous TDs. The code to compute these link values is now used in two spots, so it is moved into its own separate subroutine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: support device_may_wakeupAlan Stern2007-01-05
| | | | | | | | | This patch (as831) adds device_may_wakeup() support to uhci-hcd; it has been lacking for a long time. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: make test for ASUS motherboard more specificAlan Stern2007-01-05
| | | | | | | | | | | | | | Instead of matching all motherboards whose name contains "A7V8X" for a remote-wakeup hardware bug, this patch (as829) matches only those boards whose name is exactly equal to "A7V8X". Later motherboards don't seem to have the bug. (In fact, it's possible that only one motherboard in the world has the bug. With only one user reporting problems, it's hard to tell.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UHCI: module parameter to ignore overcurrent changesAlan Stern2006-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spamming syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short-circuited cables. In addition, controllers with no devices attached will be forced to poll for new devices rather than relying on interrupts, since each overcurrent event would generate a new interrupt. This patch (as826) is essentially a copy of David Brownell's ignore_oc patch for ehci-hcd, ported to uhci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] slab: remove kmem_cache_tChristoph Lameter2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* UHCI: workaround for Asus motherboardAlan Stern2006-10-17
| | | | | | | | | | | | | | This patch (as798) adds a workaround to uhci-hcd. At least one Asus motherboard is wired in such a way that any device attached to a suspended UHCI controller will prevent the system from entering suspend-to-RAM by immediately waking it up. The only way around the problem is to turn the controller off instead of suspending it. This fixes Bugzilla #6193. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] Really ignore kmem_cache_destroy return valueAlexey Dobriyan2006-09-27
| | | | | | | | | | | | | | | | * Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* PM: USB HCDs use PM_EVENT_PRETHAWDavid Brownell2006-09-26
| | | | | | | | | | | | | This teaches several USB host controller drivers to treat PRETHAW as a chip reset since the controller, and all devices connected to it, are no longer in states compatible with how the snapshotted suspend() left them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] UHCI: Improve FSBR-off timingAlan Stern2006-06-21
| | | | | | | | | | | | This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: remove hc_inaccessible flagAlan Stern2006-06-21
| | | | | | | | | | | | | This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: various updatesDavid Brownell2006-06-21
| | | | | | | | | | | | | | | | | | | | This patch (as705) contains a small set of updates for uhci-hcd written mostly by Dave Brownell: * Root hub suspend messages come out labeled as root hub messages; PCI messages should only come out when the pci device suspends. * Rename the reset() method to better match its init() role * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub suspend/resume errors. * When an URB fails, associate the message with the usb device not the host controller (it still hides endpoint and direction) From: David Brownell <david-b@pacbell.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: use integer-sized frame numbersAlan Stern2006-06-21
| | | | | | | | | | This patch (as687) changes uhci-hcd to keep track of frame numbers as full-sized integers rather than 11-bit values. This makes them a lot easier to handle and makes it possible to schedule beyond a 2-second window, should anyone ever want to do so. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Reimplement FSBRAlan Stern2006-06-21
| | | | | | | | | | | | This patch (as683) re-implements Full-Speed Bandwidth Reclamation (FSBR) properly. It keeps track of which endpoint queues have advanced, and when none have advanced for a sufficiently long time, FSBR is turned off. The next TD on each of the non-moving queues is modified to generate an interrupt on completion, so that FSBR can be re-enabled as soon as the hardware starts to make some progress. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: Eliminate the TD-removal listAlan Stern2006-06-21
| | | | | | | | | | This patch (as682) gets rid of the TD-removal list in uhci-hcd. It is no longer needed because now TDs are not freed until we know the hardware isn't using them. It also simplifies the code for adding and removing TDs to/from URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* definesJean Delvare2006-04-27
| | | | | | | | | We could use the recently added PCI_CLASS_SERIAL_USB_UHCI, PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in more places, for slightly shorter and clearer code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: UHCI: don't track suspended portsAlan Stern2006-04-14
| | | | | | | | | | | | Someone recently posted a bug report where it turned out that uhci-hcd was disagreeing with the UHCI controller over whether or not a port was suspended: The driver thought it wasn't and the hardware thought it was. This patch (as665) fixes the problem and simplifies the driver by removing the internal state-tracking completely. Now the driver just asks the hardware whether a port is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: pci-quirks.c: proper prototypesAdrian Bunk2006-04-14
| | | | | | | | | This patch adds a header file with proper prototypes for two functions in drivers/usb/host/pci-quirks.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] UHCI: improve debugging codeAlan Stern2006-03-20
| | | | | | | | | | | This patch (as626) makes some improvements to the debugging code in uhci-hcd. The main change is that now the code won't get compiled if CONFIG_USB_DEBUG isn't set. But there are other changes too, like adding a missing .owner field and printing a debugging dump if the controller dies. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>