aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/core
Commit message (Collapse)AuthorAge
* [PATCH] usbcore: allow suspend/resume even if drivers don't support itAlan Stern2005-12-21
| | | | | | | | | | | | This patch (as618) changes usbcore to prevent derailing the suspend/resume sequence when a USB driver doesn't include support for it. This is a workaround rather than a true fix; the core needs to be changed so that URB submissions from suspended drivers can be refused and outstanding URBs cancelled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: Fix USB suspend/resume crasher (#2)Benjamin Herrenschmidt2005-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch closes the IRQ race and makes various other OHCI & EHCI code path safer vs. suspend/resume. I've been able to (finally !) successfully suspend and resume various Mac models, with or without USB mouse plugged, or plugging while asleep, or unplugging while asleep etc... all without a crash. Alan, please verify the UHCI bit I did, I only verified that it builds. It's very simple so I wouldn't expect any issue there. If you aren't confident, then just drop the hunks that change uhci-hcd.c I also made the patch a little bit more "safer" by making sure the store to the interrupt register that disables interrupts is not posted before I set the flag and drop the spinlock. Without this patch, you cannot reliably sleep/wakeup any recent Mac, and I suspect PCs have some more sneaky issues too (they don't frankly crash with machine checks because x86 tend to silently swallow PCI errors but that won't last afaik, at least PCI Express will blow up in those situations, but the USB code may still misbehave). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: ohci, move ppc asic tweaks nearer pciDavid Brownell2005-11-24
| | | | | | | | | | | | This should fix a suspend/resume issues that appear with OHCI on some PPC hardware. The PCI layer should doesn't have the hooks needed for such ASIC-specific hooks (in this case, software clock gating), so this moves the code to do that into hcd-pci.c ... where it can be done after the relevant PCI PM state transition (to/from D3). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: EHCI updatesDavid Brownell2005-11-24
| | | | | | | | | | | | | | | | | | | | | | | | This fixes some bugs in EHCI suspend/resume that joined us over the past few releases (as usbcore, PCI, pmcore, and other components evolved): - Removes suspend and resume recursion from the EHCI driver, getting rid of the USB_SUSPEND special casing. - Updates the wakeup mechanism to work again; there's a newish usbcore call it needs to use. - Provide simpler tests for "do we need to restart from scratch", to address another case where PCI Vaux was lost. (In this case it was restoring a swsusp snapshot, but there could be others.) Un-exports a symbol that was temporarily exported. A notable change from previous version is that this doesn't move the spinlock init, so there's still a resume/reinit path bug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: move CONFIG_USB_DEBUG checks into the MakefileGreg Kroah-Hartman2005-11-17
| | | | | | | | | This lets us remove a lot of code in the drivers that were all checking the same thing. It also found some bugs in a few of the drivers, which has been fixed up. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] usb devio warning fixAndrew Morton2005-11-17
| | | | | | | | | drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: usbdevfs_ioctl 32bit fixAndrew Morton2005-11-17
| | | | | | | | | | | | drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast NFI if this is correct... Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] usbfs: usbfs_dir_inode_operations cleanupOGAWA Hirofumi2005-11-17
| | | | | | Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: fix 'unused variable' warningDmitry Torokhov2005-11-17
| | | | | | | | USB: fix 'unused variable' warning Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* USB: fix up some odd parts due to partial mergesGreg Kroah-Hartman2005-10-28
| | | | | | Thanks to Andrew for doing the hard work on this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: fix pm patches with CONFIG_PM off part 2Andrew Morton2005-10-28
| | | | | | | | | | | | | | | With CONFIG_PM=n: drivers/built-in.o(.text+0x1098c): In function `hub_thread': drivers/usb/core/hub.c:2673: undefined reference to `.dpm_runtime_resume' drivers/built-in.o(.text+0x10998):drivers/usb/core/hub.c:2674: undefined reference to `.dpm_runtime_resume' Please, never ever ever put extern decls into .c files. Use the darn header files :( Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: fix pm patches with CONFIG_PM off part 1Andrew Morton2005-10-28
| | | | | | | | | | | | | With CONFIG_PM=n: drivers/built-in.o(.text+0x2a69c): In function `ohci_hub_control': drivers/usb/host/ohci-hub.c:539: undefined reference to `.usb_hcd_resume_root_hub' drivers/built-in.o(.text+0x2b920): In function `ohci_irq': drivers/usb/host/ohci-hcd.c:726: undefined reference to `.usb_hcd_resume_root_hub' Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbcore: Fix handling of sysfs strings and other attributesAlan Stern2005-10-28
| | | | | | | | | | This patch (as592) makes a few small improvements to the way device strings are handled, and it fixes some bugs in a couple of other sysfs attribute routines. (Look at show_configuration_string() to see what I mean.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Fix maxpacket length for ep0 on root hubsAlan Stern2005-10-28
| | | | | | | | | | This patch (as591) fixes a rather innocuous bug that has been around for quite a long time: Virtual root hubs should have a maxpacket length of 64 for endpoint 0. I didn't realize it was wrong until I started looking through the endpoint attribute files. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbcore: Use kzalloc instead of kmalloc/memsetAlan Stern2005-10-28
| | | | | | | | This patch (as590) fixes up all the remaining places where usbcore can use kzalloc rather than kmalloc/memset. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbcore: Wrap lines before column 80Alan Stern2005-10-28
| | | | | | | | I can't stand text lines that wrap-around in my 80-column windows. This patch (as589) makes cosmetic changes to a couple of source files. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbcore: endpoint attributes track altsetting changesAlan Stern2005-10-28
| | | | | | | | | | | | | | | | | This patch (as588) fixes the way endpoint attribute files are registered and unregistered. Now they will correctly track along with altsetting changes. This fixes bugzilla entry #5467. In a separate but related change, when a usb_reset_configuration call fails, the device state is not changed to USB_STATE_ADDRESS. In the first place, failure means that we don't know what the state is, not that we know the device is unconfigured. In the second place, doing this can potentially lead to a memory leak, since usbcore might not realize there still is a current configuration that needs to be destroyed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbcore: Improve endpoint sysfs file handlingAlan Stern2005-10-28
| | | | | | | | | | | | | | | | This revised patch (as587b) improves the implementation of USB endpoint sysfs files. Instead of storing a whole bunch of attributes for every single endpoint, each endpoint now gets its own kobject and they can share a static list of attributes. The number of extra fields added to struct usb_host_endpoint has been reduced from 4 to 1. The bEndpointAddress field is retained even though it is redundant (it repeats the same information as the attributes' directory name). The code avoids calling kobject_register, to prevent generating unwanted hotplug events. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: always export interface information for modaliasGreg Kroah-Hartman2005-10-28
| | | | | | | | | | | | This fixes a problem with some cdc acm devices that were not getting automatically loaded as the module alias was not being reported properly. This check was for back in the days when we only reported hotplug events for the main usb device, not the interfaces. We should always give the interface information for MODALIAS/modalias as it can be needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usb: Patch for USBDEVFS_IOCTL from 32-bit programsPete Zaitcev2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dell supplied me with the following test: #include<stdio.h> #include<errno.h> #include<sys/ioctl.h> #include<fcntl.h> #include<linux/usbdevice_fs.h> main(int argc,char*argv[]) { struct usbdevfs_hub_portinfo hubPortInfo = {0}; struct usbdevfs_ioctl command = {0}; command.ifno = 0; command.ioctl_code = USBDEVFS_HUB_PORTINFO; command.data = (void*)&hubPortInfo; int fd, ret; if(argc != 2) { fprintf(stderr,"Usage: %s /proc/bus/usb/<BusNo>/<HubID>\n",argv[0]); fprintf(stderr,"Example: %s /proc/bus/usb/001/001\n",argv[0]); exit(1); } errno = 0; fd = open(argv[1],O_RDWR); if(fd < 0) { perror("open failed:"); exit(errno); } errno = 0; ret = ioctl(fd,USBDEVFS_IOCTL,&command); printf("IOCTL return status:%d\n",ret); if(ret<0) { perror("IOCTL failed:"); close(fd); exit(3); } else { printf("IOCTL passed:Num of ports %d\n",hubPortInfo.nports); close(fd); exit(0); } return 0; } I have verified that it breaks if built in 32 bit mode on x86_64 and that the patch below fixes it. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: convert usbmon to use usb notifiersGreg Kroah-Hartman2005-10-28
| | | | | | This also removes 2 usbmon callbacks. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: convert usbfs/inode.c to use usb notifiersGreg Kroah-Hartman2005-10-28
| | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: convert usbfs/devio.c to use usb notifiersGreg Kroah-Hartman2005-10-28
| | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: add notifier functions to the USB core for devices and bussesGreg Kroah-Hartman2005-10-28
| | | | | | | | | | This should let us get rid of all of the different hooks in the USB core for when something has changed. Also, some other parts of the kernel have wanted to know this kind of information at times. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: remove the global function usbdev_lookup_minorGreg Kroah-Hartman2005-10-28
| | | | | | It's only used locally. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspendAlan Stern2005-10-28
| | | | | | | | | | | | | | | | This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor ↵Greg Kroah-Hartman2005-10-28
| | | | | | | | | | | | | | fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-)
* [PATCH] USB: usb_bulk_message() handles interrupts endpointsAlan Stern2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | Because there is no bulk_interrupt_message() routine and no USBDEVFS_INTERRUPT ioctl, people have been forced to abuse the usb_bulk_message() routine and USBDEVFS_BULK by using them for interrupt transfers as well as bulk transfers. This patch (as567) formalizes this practice and adds code to usb_bulk_message() for detecting when the target is really an interrupt endpoint. If it is, the routine submits an interrupt URB (using the default interval) instead of a bulk URB. In theory this should help HCDs that don't like it when people try to mix transfer types, queuing both periodic and non-periodic types for the same endpoint. Not fully tested -- I don't have any programs that use USBDEVFS_BULK for interrupt transfers -- but it compiles okay and normal bulk messages work as well as before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/message.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)
* [PATCH] updates for "controller suspended" handlingDavid Brownell2005-10-28
| | | | | | | | | | | | | | Reject URBs to _all_ devices when their host controllers are suspended; even root hub registers will be unavailable. Also, don't reject urbs to root hubs in other cases; the only upstream link is through that controller (on PCI or whatever SOC bus is in use). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-)
* [PATCH] stop exporting two functionsDavid Brownell2005-10-28
| | | | | | | | | | | | | | | The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-)
* [PATCH] usbcore PCI glue updates for PMDavid Brownell2005-10-28
| | | | | | | | | | | | | | | | | | | | | This updates the PCI glue to address the new and simplified usbcore suspend semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because hcd->hub_suspend() will always be called. - Removes now-unneeded recursion support - Go back to ignoring faults reported by the wakeup calls; we expect them to fail sometimes, and that's just fine. The PCI HCDs will need simple changes to catch up to this, like being able to ignore the setting of CONFIG_USB_SUSPEND. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------ drivers/usb/core/hcd.h | 6 +- 2 files changed, 53 insertions(+), 59 deletions(-)
* [PATCH] root hub updates (greater half)David Brownell2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-)
* [PATCH] root hub changes (lesser half)David Brownell2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-)
* [PATCH] all HCDs provide root hub suspend/resume methodsDavid Brownell2005-10-28
| | | | | | | | | | | | | | | | | | | | | This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
* [PATCH] USB: Fix usb hub buildMatt Porter2005-10-28
| | | | | | | | Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
* [PATCH] remove some USB_SUSPEND dependenciesDavid Brownell2005-10-28
| | | | | | | | | | | | | | | | | | | | This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-)
* [PATCH] remove duplicated resume path codeDavid Brownell2005-10-28
| | | | | | | | | | This gets rid of some inconsistently duplicated logic to resume interfaces. Similar code was in both finish_port_resume() and in usb_generic_resume(). Now there is just one copy of that code, accessed regardless of whether CONFIG_USB_SUSPEND is enabled. Fault handling is also more consistent. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] remove usb_suspend_device() parameterDavid Brownell2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
* [PATCH] remove suspend-path recursionDavid Brownell2005-10-28
| | | | | | | | | | | | | | | | This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which suspended children (of devices or hubs) that weren't already suspended. When it sees such cases, suspend now just fails cleanly. That logic was not needed during system-wide sleep state transitions; and given the current notions of how to manage selective suspend transitions, we don't want it there either. Where it was particularly handy was coping with various limitations of the sysfs "echo -n N > power/state" support. (These include assuming that "N" is always meaningful to the driver; and that drivers can only transition to state N from state zero.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usb_interface power stateDavid Brownell2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the handling of power state for USB interfaces. - Formalizes an existing invariant: interface "power state" is a boolean: ON when I/O is allowed, and FREEZE otherwise. It does so by defining some inlined helpers, then using them. - Adds a useful invariant: the only interfaces marked active are those bound to non-suspended drivers. Later patches build on this invariant. - Simplifies the interface driver API (and removes some error paths) by removing the requirement that they record power state changes during suspend and resume callbacks. Now usbcore does that. A few drivers were simplified to address that last change. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 33 +++++++++------------ drivers/usb/core/message.c | 1 drivers/usb/core/usb.c | 65 +++++++++++++++++++++++++++++++++---------- drivers/usb/core/usb.h | 18 +++++++++++ drivers/usb/input/hid-core.c | 2 - drivers/usb/misc/usbtest.c | 10 ------ drivers/usb/net/pegasus.c | 2 - drivers/usb/net/usbnet.c | 2 - 8 files changed, 85 insertions(+), 48 deletions(-)
* [PATCH] USB: add more snooping hooks in devio.cGreg Kroah-Hartman2005-10-28
| | | | | | Now we can log the urbs travelling through usbfs Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer ↵Greg Kroah-Hartman2005-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | needed Also fixes all drivers that set this field, and removes some other devfs specfic USB logic. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/class/usblp.c | 3 +-- drivers/usb/core/file.c | 19 ++++--------------- drivers/usb/image/mdc800.c | 3 +-- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/hiddev.c | 3 +-- drivers/usb/media/dabusb.c | 3 +-- drivers/usb/misc/auerswald.c | 3 +-- drivers/usb/misc/idmouse.c | 5 ++--- drivers/usb/misc/legousbtower.c | 5 ++--- drivers/usb/misc/rio500.c | 3 +-- drivers/usb/misc/sisusbvga/sisusb.c | 5 ----- drivers/usb/misc/usblcd.c | 9 ++++----- drivers/usb/usb-skeleton.c | 3 +-- include/linux/usb.h | 7 ++----- 14 files changed, 22 insertions(+), 51 deletions(-)
* [PATCH] USB: add endpoint information to sysfsGreg Kroah-Hartman2005-10-28
| | | | | | | | | | | | This patch adds endpoint information for both devices and interfaces to sysfs. Previously it was only possible to get the endpoint information from usbfs, and never possible to get any information on endpoint 0. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/sysfs.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/usb.h | 4 2 files changed, 197 insertions(+), 2 deletions(-)
* Merge ../bleed-2.6Greg KH2005-10-28
|\
| * [PATCH] gfp_t: drivers/usbAl Viro2005-10-28
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Driver Core: fix up all callers of class_device_create()Greg Kroah-Hartman2005-10-28
| | | | | | | | | | | | | | | | The previous patch adding the ability to nest struct class_device changed the paramaters to the call class_device_create(). This patch fixes up all in-kernel users of the function. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] usb device wakeup flagsDavid Brownell2005-10-28
|/ | | | | | | | | | | | | | | | | This patch teaches "usb_device" about the new driver model wakeup support: - It updates device wakeup capabilities when entering a configuration with the WAKEUP attribute; - During suspend processing it consults the policy bit to see whether it should enable wakeup for that device. (This resolves a FIXME to not assume the answer is always "yes"; some devices lie about supporting remote wakeup.) Support for root hubs and the HCDs is separate (and more complex). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Use the new "kill_proc_info_as_uid()" for USB disconnect tooLinus Torvalds2005-10-10
| | | | | | | All the same issues - we can't just save the pointer to the thread, we must save the pid/uid/euid combination. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix signal sending in usbdevio on async URB completionHarald Welte2005-10-10
| | | | | | | | | | | | | | | | | | | | | | | | | | If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] usb/core/hcd-pci.c: don't free_irq() on suspendDaniel Ritz2005-09-30
| | | | | | | | the free_irq() in USB suspend breaks resume on some setups where USB (ohci/ehci) shares the interrupt with an other device. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-14 11:37:41 -0500