aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
Commit message (Collapse)AuthorAge
...
| * | | serial: 8250: Decouple RSA probePeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; separate RSA probe and resource management from base port operations. Override base port operations for the config_port(), request_port() and release_port() methods to implement the optional RSA probe and resource management only in the universal/legacy 8250 driver. Introduce 'probe' flags for 8250 ports, which allows drivers higher up the driver stack to enable optional probes. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Only get RSA resource when requiredPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The probe for Remote Supervisor Adapter is limited to port i/o addresses which match one of the probe_rsa[] module parameter addresses. Limit RSA resource acquire to matching i/o ports. The result is a saner probe policy: only perform optional probes when specified rather than by default. NB: It is possible for userspace to set the port type == PORT_RSA with ioctl(TIOCSSERIAL) and then autoconfig with ioctl(TIOCSERCONFIG), which if it fails, may leave the port type set to PORT_RSA. Since this may have previously resulted in a working RSA port, this behavior is preserved. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Get RSA resource iff CONFIG_SERIAL_8250_RSAPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for Remote Supervisor Adapter is conditional on CONFIG_SERIAL_8250_RSA; only attempt RSA resource acquire if defined. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Initialize default dma handlers when setting defaultsPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; move default dma tx/rx handler initialization into serial8250_set_defaults(), which allows default dma ops to remain unexported from the base port operations module after the split. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Initialize fixed type fields when setting defaultsPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; move fixed type initialization into serial8250_set_defaults(). This enables uart_config[] array to remain file scope in base port operations after the split. NB: the call to serial8250_init_fixed_type_port() from serial8250_register_ports() was added by commit b5d228cc4f85 ("serial: copy UART properties of UPF_FIXED_TYPE ports provisioned using early_serial_setup") specifically to support ports initialized by early_serial_setup(). Since serial8250_set_defaults() is called from early_serial_setup(), fixed type initialization is now already handled there before serial8250_register_ports() is called. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Encapsulate port i/o method initPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; introduce serial8250_set_defaults() to set default port methods prior to driver override. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Separate port initializationPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; introduce serial8250_init_port() to initialize port fields uncoupled from port structure storage. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Separate legacy irq handling from core port operationsPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; decouple irq setup/teardown and handler from core port operations. Introduce setup_irq() and release_irq() 8250 driver methods; the 8250 core will use these methods to install and remove irq handling for the given 8250 port. Refactor irq chain linking/unlinking from 8250 core into univ8250_setup_irq()/univ8250_release_irq() for the universal 8250 driver. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Separate 8250 console interfacePeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 core split; separate shared console interface from the console definition of the universal driver. Introduce 8250 shared console interface; serial8250_console_write() and serial8250_console_setup() which decouples the console operation from the port structure storage. Rename existing serial8250_console* identifiers to univ8250_console*. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250_early: Remove setup_early_serial8250_console()Peter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | setup_earlycon() will now match and register the desired earlycon from the param string (as if 'earlycon=...' had been set on the command line). Use setup_earlycon() from existing arch call sites which start an earlycon directly. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: earlycon: Enable earlycon without command line paramPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlycon matching can only be triggered if 'earlycon=...' has been specified on the kernel command line. To workaround this limitation requires tight coupling between arches and specific serial drivers in order to start an earlycon. Devicetree avoids this limitation with a link table that contains the required data to match earlycons. Mirror this approach for earlycon match by name. Re-purpose EARLYCON_DECLARE to generate a table entry which associates name with setup() function. Re-purpose setup_earlycon() to scan this table for an earlycon match, which is registered if found. Declare one "earlycon" early_param, which calls setup_earlycon(). This design allows setup_earlycon() to be called directly with a param string (as if 'earlycon=...' had been set on the command line). Re-registration (either directly or by early_param) is prevented. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: earlycon: Refactor earlycon registrationPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate earlycon matching from registration; add register_earlycon which initializes and registers the matched earlycon. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: earlycon: Skip parse_options() if empty stringPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlycon param strings of the form earlycon=<name> are rejected from parse_options() with an error (which, in turn, results in a NULL argument for the setup() method options parameter). Only pass non-empty string to parse_options(); this will enable handling actual parse errors differently than expected and allow formats. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: earlycon: Ignore parse_options() error codePeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because setup_earlycon() continues to attempt console registration if an error occurred parsing the option string, the actual value of the error code from parse_options() is ignored. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250_early: Fix setup() error codePeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If parsing failed to decode a valid uart addr, return -ENODEV instead of success. Although setup_earlycon() will detect the failure anyway (because the write() method has not been set), that behavior is not obvious and should not be relied on. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250_early: Assume uart already initialized if no baud optionPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The <baud><parity><bit> option string is not supplied if the earlycon is started via devicetree and OF_EARLYCON_DECLARE(). The option string is also not required if started via kernel command line parameters of the form: earlycon=uart,mmio,<addr> console=uart,mmio,<addr> If earlycon_device->baud is 0, then an option string was not supplied. In this case, assume the uart has already been initialized by the bootloader or firmware. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: earlycon: Move ->uartclk initializePeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initializing the ->uartclk field is not related to option parsing; relocate from parse_options() to setup_earlycon() (which mirrors the behavior of of_setup_earlycon()). Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250_early: Remove early_device variablePeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | early_device was only required for serial8250_find_port_for_earlycon(), which was replaced by extensible console matching. Fixup early_serial8250_write() to get the earlycon_device * from console->data (which is initialized by {of_}setup_earlycon()). Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: core: Fix kernel doc for uart_console_write()Peter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | '/**' is required to start a kernel-doc comment block. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | console: Add extensible console matchingPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add match() method to struct console which allows the console to perform console command line matching instead of (or in addition to) default console matching (ie., by fixed name and index). The match() method returns 0 to indicate a successful match; normal console matching occurs if no match() method is defined or the match() method returns non-zero. The match() method is expected to set the console index if required. Re-implement earlycon-to-console-handoff with direct matching of "console=uart|uart8250,..." to the 8250 ttyS console. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Decouple core from skip_txen_test module paramPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; initialize the port flags based on the "skip_txen_test" module param to use the existing flag test. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Move ns16550a_goto_hispeed() to local headerPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250_core.c file split; move shared inline function to local header file. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Simplify capabilities reset at port unregisterPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since uart->port.type has just reset to PORT_UNKNOWN, capabilities are reset to uart_config[PORT_UNKNOWN].flags, which is 0. Removes unnecessary dependency on uart_config[]. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Remove duplicate ->handle_irq initializationPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set_io_from_upio() already initializes ->handle_irq to serial8250_default_handle_irq. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250: Compute ttyS index from port minorPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for 8250 split; calculate the ttyS index directly from the port minor which avoids the global serial8250_reg reference from base port operations. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: core: Add minor field to uart_portPeter Hurley2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UART drivers that share ttyS namespace cannot trivially compute the ttyS index from the port->line value since the minor_start may be offset from minor 64. Further, to do so requires a pointer to the uart driver since there is no back pointer from uart_port to uart_driver. Rather than have UART drivers computing the minor value by themselves, encapsulate within the serial core at port registration time. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | bfin uart: it will hang when read current y count if not disable dma irqHao Liang2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add irq disable and enable in bfin_serial_rx_dma_timeout in case of system hang. This reverts part of commit 9642dbe73c8a ("serial: bfin-uart: avoid dead lock in rx irq handler in smp kernel"). Signed-off-by: Hao Liang <hliang1025@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: 8250_dw: fix 'cts-override'Dmitry Torokhov2015-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are dealing with CTS, not DSR here (we dealt with DSR a few lines above), so set appropriate bits. Reported-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | Merge 4.0-rc5 into tty-nextGreg Kroah-Hartman2015-03-23
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | We want the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | drivers/tty: serial: remove info messageJorge Ramirez-Ortiz2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unacceptable levels of debug info will happen when the DMA driver defined in the DT/ACPI is a blacklisted module. Another cause for log polution would be the defer probing of the DMA driver taking too long - in which case the message that this commit removes would be cluttering the logs due to the init daemons activity. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial, x86: use UPF_* constants for flagsAndy Shevchenko2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following sparse warnings: drivers/tty/serial/8250/8250_core.c:3231:32: warning: incorrect type in assignment (different base types) drivers/tty/serial/8250/8250_core.c:3231:32: expected restricted upf_t [usertype] flags drivers/tty/serial/8250/8250_core.c:3231:32: got unsigned int const [unsigned] flags Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: imx: Add braces to avoid ambiguous 'else'Fabio Estevam2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 17b8f2a3fdca29 ("serial: imx: add support for half duplex rs485") introduced the following build warning: drivers/tty/serial/imx.c: In function 'imx_set_termios': drivers/tty/serial/imx.c:1301:7: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] Add the suggested braces to avoid the build warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: mctrl_gpio: Fix build warningsFabio Estevam2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following build warnings: drivers/tty/serial/serial_mctrl_gpio.c: In function 'mctrl_gpio_init': drivers/tty/serial/serial_mctrl_gpio.c:110:4: warning: return makes pointer from integer without a cast return PTR_ERR(gpios->gpio[i]); ^ /home/build/work/batch/drivers/tty/serial/serial_mctrl_gpio.c:90:6: warning: unused variable 'err' [-Wunused-variable] int err; ^ Return ERR_CAST and remove the unused 'err' variable to fix them. Fixes: 1d267ea6539f ("serial: mctrl-gpio: simplify init routine") Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | serial: mxs-auart: Fix build errorFabio Estevam2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 343fda95481a7254f ("serial: mxs-auart: properly handle mctrl_gpio failing") introduced the following build error: CC drivers/tty/serial/mxs-auart.o drivers/tty/serial/mxs-auart.c: In function 'mxs_auart_probe': drivers/tty/serial/mxs-auart.c:1282:3: error: unknown type name 'got' Fix it by providing a proper return code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | Merge 4.0-rc3 into tty-testingGreg Kroah-Hartman2015-03-09
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | This resolves a merge issue in drivers/tty/serial/8250/8250_pci.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial/8250_dw: use platform_get_irq() instead of platform_get_resource()Alexey Brodkin2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial: earlycon: Refactor parse_options into serial corePeter Hurley2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare to support console-defined matching; refactor the command line parameter string processing from parse_options() into a new core function, uart_parse_earlycon(), which decodes command line parameters of the form: earlycon=<name>,io|mmio|mmio32,<addr>,<options> console=<name>,io|mmio|mmio32,<addr>,<options> earlycon=<name>,0x<addr>,<options> console=<name>,0x<addr>,<options> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | tty/serial: at91: correct the usage of taskletLeilei Zhao2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tasklet may be scheduled and executed after serial port was shutdown, for example, DMA rx callback will schedule the tasklet while serial port is shutting down, especially serial port is sending and receiving data in a higher baud rate and it's killed by external program. In this case, tasklet_kill can only clear the current scheduling out, so tasklet should be disabled to prevent being executed in later scheduling. Otherwise, the tasklet executed after serial port was shutdown can lead to kernel crash. Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | tty/serial: at91: set ops in property init each timeLeilei Zhao2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The property in device tree will be reading each time when tty is opened, so the ops of serial port should be set after that instead of setting once in probe. Otherwise, the ops of serial port is inconsistent with the state of serial work manner. For example, the atmel serial driver can't work when switching to PIO mode due to DMA channel is not available. Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | tty/serial: at91: revise the return type of atmel_init_propertyLeilei Zhao2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function of atmel_init_property is to set the work manner of atmel serial ports according to the property in device trees. If DMA or PDC is not set or something goes wrong in getting property, the work manner will switch to general PIO mode, thus there will not be any failure case in this function. It's actually a procedure. So changing the return type from int to void. Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | tty/serial: at91: correct buffer size used in DMALeilei Zhao2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The buffer size set in DMA is inconsistent with its allocation. So keep them consistent here. The structure atmel_uart_char is used in PIO mode with its meaning. But here in DMA, all of the buffer is treated as general char. Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | tty/serial: at91: correct check of buf used in DMALeilei Zhao2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only use buf of ring In DMA rx function while using buf of xmit in DMA tx function. So in DMA rx we need definitively to check the buf of ring which is corresponding to DMA rx function. And use macro PAGE_ALIGNED to simplify the expression. Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | drivers/tty: amba: defer DMA probe until the DMA channel is required.Jorge Ramirez-Ortiz2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a race condition that happens when device_initcall(pl011_dma_initicall) is executed before all the devices have been probed - this issue was observed on a hisi_6220 SoC (HiKey board from Linaro). The deferred driver probing framework relies on late_initcall to trigger deferred probes so it is just possible that, even with a valid DMA driver ready to be loaded, we fail to synchronize with it. The proposed implementation delays probing the DMA until dma_startup. As this is invoked on port startup and port resume - but DMA probing is only required once - we avoid calling multiple times using a new field in uart_amba_port to track this scenario. This commit allows for subsequent attempts to associate an external DMA if the DMA driver itself is not available (but present in the deferred probe pending list). Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial/amba-pl011: Leave the TX IRQ alone when the UART is not openDave Martin2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Getting the TX IRQ re-asserted from scratch can be inefficient in some setups. This patch avoids clearing the TX IRQ across pl011_shutdown()... pl011_startup(), so that if the port is closed and reopened, the IRQ will still work afterwards without having to bootstrap it again. The TX IRQ continues to be masked in IMSC when the UART is not in use. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial/amba-pl011: Activate TX IRQ passivelyDave Martin2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current PL011 driver transmits a dummy character when the UART is opened, to assert the TX IRQ for the first time (see pl011_startup()). The UART is put in loopback mode temporarily, so the receiver presumably shouldn't see anything. However... At least some platforms containing a PL011 send characters down the wire even when loopback mode is enabled. This means that a spurious NUL character may be seen at the receiver when the PL011 is opened through the TTY layer. The current code also temporarily sets the baud rate to maximum and the character width to the minimum, to that the dummy TX completes as quickly as possible. If this is seen by the receiver it will result in a framing error and can knock the receiver out of sync -- turning subsequent output into garbage until synchronisation is reestablished. (Particularly problematic during boot with systemd.) To avoid spurious transmissions, this patch removes assumptions about whether the TX IRQ will fire until at least one TX IRQ has been seen. Instead, the UART will unmask the TX IRQ and then slow-start via polling and timer-based soft IRQs initially. If the TTY layer writes enough data to fill the FIFO to the interrupt threshold in one go, the TX IRQ should assert, at which point the driver changes to fully interrupt-driven TX. In this way, the TX IRQ is activated as a side-effect instead of being done deliberately. This should also mean that the driver works on the SBSA Generic UART[1] (a cut-down PL011) without invasive changes. The Generic UART lacks some features needed for the dummy TX approach to work (FIFO disabling and loopback). [1] Server Base System Architecture (ARM-DEN-0029-v2.3) http://infocenter.arm.com/ (click-thru required :/) Signed-off-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | tty: serial: xilinx_uartps: Use Macro for ttyPS0Peter Crosthwaite2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All instances of "ttyPS" use this macro except for this one. Convert it. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial: sprd: Fix iotypePeter Hurley2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Spreadtrum UART is accessed with mmio; declare the proper iotype. Also prevent userspace from assigning any other iotype via ioctl(TIOCSSERIAL). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial: imx: add support for half duplex rs485Uwe Kleine-König2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The transmitter is expected to be controlled by the UART's RTS pin. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial: imx: drop support for IRDAUwe Kleine-König2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for IRDA was added in 2009 in commit v2.6.31-rc1~399^2~2. There are no in-tree users. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | serial: imx: fix comment about which machines use the i.MX21 typeUwe Kleine-König2015-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-24 10:15:34 -0400