aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
Commit message (Collapse)AuthorAge
* [SERIAL] Support for Intashield 2 port PCI serial cardPeter Horton2006-08-27
| | | | | | | | Here is a patch that adds support for the Instashield IS-200 2 port PCI serial card. Signed-off-by: Peter Horton <pdh@colonel-panic.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [SERIAL] sunzilog: Mirror the sunsab serial setup bug fix.David S. Miller2006-08-23
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* [SERIAL] sunsab: Fix E250 console with RSC.Marc Zyngier2006-08-23
| | | | | | | | | | | | | | This fixes yet another sunsab problem, when console is set to anything but the first port. The console framework calls sunsab_console_setup for each port, and we end up setting up a console on a not yet discovered port, which leads to an Oops. Instead, defer console setup until the requested port is properly initialized. Tested on an E250 through an RSC console. Reported by Daniel Smolik <marvin@mydatex.cz> Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SERIAL] sunzilog: Fix instance enumeration.David S. Miller2006-07-21
| | | | | | | | | | | Just do a linear enumeration so that we handle sun4d systems correctly. As a consequence, eliminate the hard coded keyboard and mouse channel line values, use the CONS_{KEYB,MS} flags instead. Also, report the keyboard/mouse Zilog channels just like the uart ones do. Signed-off-by: David S. Miller <davem@davemloft.net>
* [SERIAL] sunzilog: Remove duplicate IRQ registry in zs_probe().David S. Miller2006-07-21
| | | | | | | We do it now in sunzilog_init() after all devices have been probed. Signed-off-by: David S. Miller <davem@davemloft.net>
* [SERIAL] sunzilog: Register IRQ after all devices have been probed.David S. Miller2006-07-21
| | | | | | | Otherwise we will deref half-initialized channel pointers and crash in the interrupt handler. Signed-off-by: David S. Miller <davem@davemloft.net>
* [SERIAL] sunsab: Get line numbers and table sizing correct.David S. Miller2006-07-21
| | | | | | | | Table sizing code should look for "se" not "su" nodes. The chip at the lower address should get the first index. Signed-off-by: David S. Miller <davem@davemloft.net>
* [SPARC64] Fix sunsab ports orderingMarc Zyngier2006-07-21
| | | | | | | | Register second SAB port before the first one, as serial A is wired to it, and expected to appear as ttyS0. Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SERIAL] sunsab: Fix significant typo in sab_probe()David S. Miller2006-07-14
| | | | | | | | | Instead of initializing both ports of a SAB device properly, we were setting up the first port structure twice and ending up only with the second port, oops. Signed-off-by: David S. Miller <davem@davemloft.net>
* [SERIAL] sunsu: Report keyboard and mouse ports in kernel log.David S. Miller2006-07-14
| | | | | | Otherwise there is no explicit mention of these devices. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2006-07-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (53 commits) [MIPS] sparsemem: fix crash in show_mem [MIPS] vr41xx: Update workpad setup function [MIPS] vr41xx: Update e55 setup function [MIPS] vr41xx: Removed old v2.4 VRC4173 driver [MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.h [MIPS] MIPSsim: Build fix, rename sim_timer_setup -> plat_timer_setup. [MIPS] Remove unused code. [MIPS] IP22 Fix brown paper bag in RTC code. [MIPS] Atlas, Malta, SEAD: Don't disable interrupts in mips_time_init(). [MIPS] Replace board_timer_setup function pointer by plat_timer_setup. [MIPS] Nuke redeclarations of board_time_init. [MIPS] Remove redeclarations of setup_irq(). [MIPS] Nuke redeclarations of board_timer_setup. [MIPS] Print out TLB handler assembly for debugging. [MIPS] SMTC: Reformat to Linux style. [MIPS] MIPSsim: Delete redeclaration of ll_local_timer_interrupt. [MIPS] IP27: Reformatting. [MIPS] IP27: Invoke setup_irq for timer interrupt so proc stats will be shown. [MIPS] IP27: irq_chip startup method returns unsigned int. [MIPS] IP27: struct irq_desc member handler was renamed to chip. ...
| * [MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.hYoichi Yuasa2006-07-13
| | | | | | | | | | Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-07-13
|\ \ | |/ |/| | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: sysrq deadlock fix [SERIAL] 8250: add tsi108 serial support [SERIAL] IP22: fix serial console hangs [SERIAL] dz: Fix compilation error
| * [SERIAL] 8250: sysrq deadlock fixAndrew Morton2006-07-09
| | | | | | | | | | | | | | | | | | Fix http://bugzilla.kernel.org/show_bug.cgi?id=6716 Doing a sysrq over a serial line into an SMP machine presently deadlocks. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] 8250: add tsi108 serial supportZang Roy-r619112006-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch gets rid of CONFIG_TSI108_BRIDGE. I add UPIO_TSI to handle IIR and IER register in serial_in and serial_out. (1) the reason to rewrite serial_in: TSI108 rev Z1 version ERRATA. Reading the UART's Interrupt Identification Register (IIR) clears the Transmit Holding Register Empty (THRE) and Transmit buffer Empty (TEMP) interrupts even if they are not enabled in the Interrupt Enable Register (IER). This leads to loss of the interrupts. Interrupts are not cleared when reading UART registers as 32-bit word. (2) the reason to rewrite serial_out: Check for UART_IER_UUE bit in the autoconfig routine. This section of autoconfig is excluded for Tsi108/109 because bits 7 and 6 are reserved for internal use. They are R/W bits. In addition to incorrect identification, changing these bits (from 00) will make Tsi108/109 UART non-functional. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] IP22: fix serial console hangsJulien BLACHE2006-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch below fixes serial console hangs as seen on IP22 machines. Typically, while booting, the machine hangs for ~1 minute displaying "INIT: ", then the same thing happens again when init enters in the designated runlevel and finally the getty process on ttyS0 hangs indefinitely (though strace'ing it helps). strace (-e raw=ioctl, otherwise the ioctl() translation is utterly bogus) reveals that getty hangs on ioctl() 0x540f which happens to be TCSETSW (I saw it hang on another console ioctl() but couldn't reproduce that one). A diff between ip22zilog and sunzilog revealed the following differences: 1. the channel A flag being set on up.port.flags instead of up.flags 2. the channel A flag being set on what is marked as being channel B 3. sunzilog has a call to uart_update_timeout(port, termios->c_cflag, baud); at the end of sunzilog_set_termios(), which ip22zilog lacks (on purpose ?) The patch below addresses point 1 and fixes the serial console hangs just fine. However point 2 should be investigated by someone familiar with the IP22 Zilog; it's probably OK as is but even if it is, a comment in ip22zilog.c is badly needed. Point 3 is left as an exercise for whoever feels like digging into ip22zilog :) These are the main obvious differences between ip22zilog and sunzilog. Newer versions of sunzilog (Linus's git tree as of today) are more close to ip22zilog as the sbus_{write,read}b have been changed into simple {write,read}b, which shrinks the diff by a fair amount. Resyncing both drivers should be doable in a few hours time now for someone familiar with the IP22 Zilog hardware. Signed-off-by: Julien BLACHE <jb@jblache.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] dz: Fix compilation errorMartin Michlmayr2006-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following compilation error in the dz serial driver that got introduced with the "kernel console should send CRLF not LFCR" change. CC drivers/serial/dz.o drivers/serial/dz.c: In function 'dz_console_putchar': drivers/serial/dz.c:679: error: 'uport' undeclared (first use in this function) drivers/serial/dz.c:679: error: (Each undeclared identifier is reported only once drivers/serial/dz.c:679: error: for each function it appears in.) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [SERIAL] sunsu: Handle keyboard and mouse ports directly.David S. Miller2006-07-13
|/ | | | | | | | | | | | | | | | The sunsu_ports[] array exists merely to be able to easily use an integer index to get at the proper serial console port struct. We size this only for real ports, not for the keyboard and mouse, and thus keyboard and mouse port registration would fail. Fix this by dynamically allocating the port struct for the keyboard and mouse, instead of using the sunsu_ports[] array. Signed-off-by: David S. Miller <davem@davemloft.net>
* [ARM] 3710/1: AT91 Serial: Use GPIO APIAndrew Victor2006-07-05
| | | | | | | | | | Patch from Andrew Victor The AT91RM9200 errata work-around should be using the GPIO API and not accessing the PIO registers directly. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-07-04
|\ | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Ensure 8250_pci quirks are not marked __devinit [SERIAL] Convert fifosize to an unsigned int
| * [SERIAL] Ensure 8250_pci quirks are not marked __devinitRussell King2006-07-03
| | | | | | | | | | | | | | | | | | The 8250_pci quirks must not be marked __devinit since they may be used from parport_serial. We only really need to mark those which might be used by cards recognised by parport_serial, but that wouldn't allow static checking. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] Convert fifosize to an unsigned intRussell King2006-07-02
| | | | | | | | | | | | | | | | | | | | | | Some UARTs have more than 255 bytes of FIFO, which can't be represented by an unsigned char. Change the kernel's internal structure to be an unsigned int, but still export an unsigned char via the TIOCGSERIAL ioctl. If the TIOCSSERIAL ioctl provides a fifo size of 0, assume this means "don't change" otherwise we'll corrupt the larger fifo sizes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-07-03
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: add defconfig for Freescale MPC8349E-mITX board powerpc: Add base support for the Freescale MPC8349E-mITX eval board Documentation: correct values in MPC8548E SEC example node [POWERPC] Actually copy over i8259.c to arch/ppc/syslib this time [POWERPC] Add new interrupt mapping core and change platforms to use it [POWERPC] Copy i8259 code back to arch/ppc [POWERPC] New device-tree interrupt parsing code [POWERPC] Use the genirq framework [PATCH] genirq: Allow fasteoi handler to retrigger disabled interrupts [POWERPC] Update the SWIM3 (powermac) floppy driver [POWERPC] Fix error handling in detecting legacy serial ports [POWERPC] Fix booting on Momentum "Apache" board (a Maple derivative) [POWERPC] Fix various offb and BootX-related issues [POWERPC] Add a default config for 32-bit CHRP machines [POWERPC] fix implicit declaration on cell. [POWERPC] change get_property to return void *
| * | [POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | [PATCH] lockdep: annotate serialIngo Molnar2006-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Teach special (dual-initialized) locking code to the lock validator. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] SERIAL: allow shared 8250_pnp interruptsBjorn Helgaas2006-07-03
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PNP devices can use shared interrupts, so check to see whether we'll need SA_SHIRQ for request_irq(). The builtin PDH UART on the HP rx8640 is an example of an ACPI/PNP device that uses a shareable level-triggered, active-low interrupt. The interrupt can be shared in very large I/O configurations or by artificially lowering IA64_DEF_LAST_DEVICE_VECTOR. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Li Shaohua <shaohua.li@intel.com> Cc: Len Brown <len.brown@intel.com> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] irq-flags: serial: Use the new IRQF_ constantsThomas Gleixner2006-07-02
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2006-06-30
|\ \ | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Kill sun4v virtual device layer. [SERIAL] sunhv: Convert to of_driver layer. [SPARC64]: Mask out top 8-bits in physical address when building resources. [SERIAL] sunsu: Missing return statement in su_probe().
| * | [SERIAL] sunhv: Convert to of_driver layer.David S. Miller2006-06-30
| | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [SERIAL] sunsu: Missing return statement in su_probe().David S. Miller2006-06-30
| | | | | | | | | | | | | | | | | | | | | If we have a keyboard/mouse port, don't drop through to calling sunsu_autoconfig(). Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-06-30
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
| * | | Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
| * | | typo fixes: occuring -> occurringAdrian Bunk2006-06-30
| |/ / | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* / / [PATCH] pcmcia: another ID for serial_cs.cDominik Brodowski2006-06-30
|/ / | | | | | | | | | | Add an ID for "GlobeTrotter" cards which need a CIS override Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* | [SERIAL] sunsab: Fix section mis-match errors.David S. Miller2006-06-29
| | | | | | | | | | | | sunsab_init_one() needs to be __devinit, not __init Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SERIAL] sunsab: Convert to of_driver framework.David S. Miller2006-06-29
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SERIAL] sun{su,zilog}: Add missing MODULE_*() niceties.David S. Miller2006-06-29
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SERIAL] sunsu: Convert to of_driver framework.David S. Miller2006-06-29
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SERIAL] sunzilog: Fix bugs in device deregristration.David S. Miller2006-06-29
| | | | | | | | | | | | | | | | | | 1) Need to unregister 2 ports per of_device. 2) Need to of_iounmap() 1 mapping per of_device. 3) Need to free up the IRQ only after all devices have been unregistered. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SERIAL] sunzilog: Convert to of_driver.David S. Miller2006-06-29
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6Linus Torvalds2006-06-29
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits) [PATCH] devfs: Remove it from the feature_removal.txt file [PATCH] devfs: Last little devfs cleanups throughout the kernel tree. [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree [PATCH] devfs: Remove devfs_remove() function from the kernel tree [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree [PATCH] devfs: Remove devfs support from the sound subsystem [PATCH] devfs: Remove devfs support from the ide subsystem. [PATCH] devfs: Remove devfs support from the serial subsystem [PATCH] devfs: Remove devfs from the init code [PATCH] devfs: Remove devfs from the partition code ...
| * | [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEVGreg Kroah-Hartman2006-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've always found this flag confusing. Now that devfs is no longer around, it has been renamed, and the documentation for when this flag should be used has been updated. Also fixes all drivers that use this flag. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] devfs: Remove devfs support from the serial subsystemGreg Kroah-Hartman2006-06-26
| | | | | | | | | | | | | | | | | | Also fixes all serial drivers. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2006-06-29
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] i386: export memory more than 4G through /proc/iomem [PATCH] 64bit Resource: finally enable 64bit resource sizes [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed [PATCH] 64bit resource: change pnp core to use resource_size_t [PATCH] 64bit resource: change pci core and arch code to use resource_size_t [PATCH] 64bit resource: change resource core to use resource_size_t [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource [PATCH] 64bit resource: fix up printks for resources in misc drivers [PATCH] 64bit resource: fix up printks for resources in arch and core code [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers [PATCH] 64bit resource: fix up printks for resources in video drivers [PATCH] 64bit resource: fix up printks for resources in ide drivers [PATCH] 64bit resource: fix up printks for resources in mtd drivers [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers [PATCH] 64bit resource: fix up printks for resources in networks drivers [PATCH] 64bit resource: fix up printks for resources in sound drivers [PATCH] 64bit resource: C99 changes for struct resource declarations Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that was changed by the 64-bit resources had been deleted in the meantime ;)
| * | | [PATCH] 64bit Resource: convert a few remaining drivers to use ↵Greg Kroah-Hartman2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | resource_size_t where needed Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | [PATCH] m68knommu: fix compilation problems with 68328serial driverGreg Ungerer2006-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean out the 68328serial driver: . remove use of cli/sti . fix usage of tty_* calls . remove unused variables Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] remove TTY_DONT_FLIPPaul Fulghum2006-06-28
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove TTY_DONT_FLIP tty flag. This flag was introduced in 2.1.X kernels to prevent the N_TTY line discipline functions read_chan() and n_tty_receive_buf() from running at the same time. 2.2.15 introduced tty->read_lock to protect access to the N_TTY read buffer, which is the only state requiring protection between these two functions. The current TTY_DONT_FLIP implementation is broken for SMP, and is not universally honored by drivers that send data directly to the line discipline receive_buf function. Because TTY_DONT_FLIP is not necessary, is broken in implementation, and is not universally honored, it is removed. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* / / [SERIAL] 8250_pnp: add support for other Wacom tabletsBen Collins2006-06-26
|/ / | | | | | | | | | | | | | | http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=6a242b6c279af7805a6cca8f39dbc5bfe1f78cd1 Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] m68knommu: 532x UART supportGreg Ungerer2006-06-25
| | | | | | | | | | | | | | | | | | ColdFire serial driver support for the new 532x CPU family UARTs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-06-24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) [ARM] 3648/1: Update struct ucontext layout for coprocessor registers [ARM] Add identifying number for non-rt sigframe [ARM] Gather common sigframe saving code into setup_sigframe() [ARM] Gather common sigframe restoration code into restore_sigframe() [ARM] Re-use sigframe within rt_sigframe [ARM] Merge sigcontext and sigmask members of sigframe [ARM] Replace extramask with a full copy of the sigmask [ARM] Remove rt_sigframe puc and pinfo pointers [ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machines [ARM] 3645/1: S3C2412: irq support for external interrupts [ARM] 3643/1: S3C2410: Add new usb clocks [ARM] 3642/1: S3C24XX: Add machine SMDK2413 [ARM] 3641/1: S3C2412: Fixup gpio register naming [ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCON [ARM] 3639/1: S3C2412: serial port support [ARM] 3638/1: S3C2412: core clocks [ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parent [ARM] 3636/1: S3C2412: Add selection of CPU_ARM926 [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support [ARM] 3633/1: S3C24XX: s3c2410 gpio bugfix - wrong pin nos ...
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-29 02:46:29 -0500