aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
Commit message (Collapse)AuthorAge
* [PATCH] ppc32 CPM_UART: Fixed odd address translationsVitaly Bordug2006-04-28
| | | | | | | | | | | Current address translation methods can produce wrong results, because virt_to_bus and vice versa may not produce correct offsets on dma-allocated memory. The right way is, while tracking both phys and virt address of the window that has been allocated for boffer descriptors, and use those numbers to compute the offset and make translation properly. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc32 CPM_UART: Convert to use platform devicesVitaly Bordug2006-04-28
| | | | | | | | | | | This is intended to make the driver code more generic and flexible, to get rid of board-specific layouts within driver, and generic rehaul, yet keeping compatibility with the existing stuff utilizing it, being compatible with legacy behavior (but with complaints that legacy mode used). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] m32r: Remove a warning in m32r_sio.cHirokazu Takata2006-04-19
| | | | | | | | | /project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c: In function 'm32r_sio_console_write': /project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c:1060: warning: unused variable 'i' Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-04-02
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits) Documentation: fix minor kernel-doc warnings BUG_ON() Conversion in drivers/net/ BUG_ON() Conversion in drivers/s390/net/lcs.c BUG_ON() Conversion in mm/slab.c BUG_ON() Conversion in mm/highmem.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/signal.c BUG_ON() Conversion in kernel/ptrace.c BUG_ON() Conversion in ipc/shm.c BUG_ON() Conversion in fs/freevxfs/ BUG_ON() Conversion in fs/udf/ BUG_ON() Conversion in fs/sysv/ BUG_ON() Conversion in fs/inode.c BUG_ON() Conversion in fs/fcntl.c BUG_ON() Conversion in fs/dquot.c BUG_ON() Conversion in md/raid10.c BUG_ON() Conversion in md/raid6main.c BUG_ON() Conversion in md/raid5.c Fix minor documentation typo BFP->BPF in Documentation/networking/tuntap.txt ...
| * Merge with git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitAdrian Bunk2006-04-02
| |\
| * | fix the email address of Wendy XiongAdrian Bunk2006-03-31
| | | | | | | | | | | | | | | | | | | | | Replace a bouncing version of the email address of Wendy Xiong with a working one. Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds2006-04-02
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits) [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error) [PATCH] pcmcia: fix pcmcia_device_remove oops [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45 [PATCH] pcmcia: pseudo device handling update [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present [PATCH] pcmcia: use bitfield instead of p_state and state [PATCH] pcmcia: remove unused p_dev->state flags [PATCH] pcmcia: make pcmcia_release_{io,irq} static [PATCH] pcmcia: add return value to _config() functions [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device [PATCH] pcmcia: rename pcmcia_device.state [PATCH] pcmcia: remove unneeded Vcc pseudo setting [PATCH] pcmcia: remove export of pcmcia_release_configuration [PATCH] pcmcia: default suspend and resume handling [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq [PATCH] pcmcia: add pcmcia_disable_device [PATCH] serial_cs: add Merlin U630 IDs [PATCH] pcmcia: AT91RM9200 Compact Flash driver [PATCH] pcmcia: socket.functions starts with 1 ...
| * | [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45Petr Vandrovec2006-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ugly hack add support for Siemens MC45 PCMCIA GPRS card (which is identical to Possio GCC, and which is offered by one of our local GPRS providers). Card has unfortunate feature that after poweron oxcf950 chip is fully powered and works, but attached MC45 modem is powered down :-( There is a special sequence (which takes 1 sec :-( ) to poweron MC45 (and after MC45 powers on, it takes more than 2 secs until firmware fully boots...) which needs to be executed after all powerons. I'm really not familiar with PCMCIA subsystem, so I have no idea whether I should issue request_region() on rest of oxcf950 address range (0-7 is UART, 8-F are special configuration registers), or how this should be better integrated with PM system and so on - I just put it in same place where another hack already lived... Card uses 18.432MHz XTAL, so to get it to work you must add lines below to the /etc/pcmcia/serial.opts. case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in '030c,0003-2-GPRS-CARD--') SERIAL_OPTS="baud_base 1152000" ;; esac Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_presentDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | Instead of the DEV_OK macro, drivers should use pcmcia_dev_present(). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: use bitfield instead of p_state and stateDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: add return value to _config() functionsDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | | | | Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: remove dev_link_t and client_handle_t indirectionDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: embed dev_link_t into struct pcmcia_deviceDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: remove unneeded Vcc pseudo settingDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: default suspend and resume handlingDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] pcmcia: add pcmcia_disable_deviceDominik Brodowski2006-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary cleanups upon device or driver removal: it calls the appropriate pcmcia_release_* functions, and can replace (most) of the current drivers' _release() functions. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | [PATCH] serial_cs: add Merlin U630 IDsDomen Puncer2006-03-31
| | | | | | | | | | | | | | | | | | | | | Add Merlin U630 IDs. Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
* | | Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-04-01
|\ \ \ | |_|/ |/| | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabled
| * | [SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabledRussell King2006-03-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the 8250 probe modules to be disabled if we're building for with EMBEDDED enabled. This reduces the kernel size by not including unnecessary probe module support. Original idea from Matt Mackall for PCI only, expanded to others by rmk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | [PATCH] Decrease number of pointer derefs in jsm_tty.cJesper Juhl2006-03-31
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | Decrease the number of pointer derefs in drivers/serial/jsm/jsm_tty.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "V. ANANDA KRISHNAN" <mansarov@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PARISC] I/O-Space must be ioremap_nocache()'dHelge Deller2006-03-30
|/ | | | | | | Addresses in F-space must be accessed uncached on most parisc machines. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-03-28
|\ | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Provide Cirrus EP93xx AMBA PL010 serial support. [SERIAL] amba-pl010: allow platforms to specify modem control method [SERIAL] Remove obsoleted au1x00_uart driver [SERIAL] Small time UART configuration fix for AU1100 processor
| * [SERIAL] amba-pl010: allow platforms to specify modem control methodRussell King2006-03-26
| | | | | | | | | | | | | | | | The amba-pl010 hardware does not provide RTS and DTR control lines; it is expected that these will be implemented using GPIO. Allow platforms to supply a function to implement manipulation of modem control lines. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] Remove obsoleted au1x00_uart driverRalf Baechle2006-03-26
| | | | | | | | | | | | | | As announced in feature-removal-schedule.txt. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] Small time UART configuration fix for AU1100 processorFreddy Spierenburg2006-03-26
| | | | | | | | | | | | | | | | | | The AU1100 processor does not have an internal UART2. Only UART0, UART1 and UART3 exist. This patch removes the non existing UART2 and replaces it with a descriptive comment. Signed-off-by: Freddy Spierenburg <freddy@dusktilldawn.nl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] Typo fixesAlexey Dobriyan2006-03-28
|/ | | | | | | | Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-03-25
|\ | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-serial: [ARM] 3383/3: ixp2000: ixdp2x01 platform serial conversion [SERIAL] amba-pl010: Remove accessor macros [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI) [SERIAL] icom: select FW_LOADER
| * [SERIAL] amba-pl010: Remove accessor macrosRussell King2006-03-25
| | | | | | | | | | | | | | Remove unnecessary accessor macros, using readb/writel directly instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI)Bjorn Helgaas2006-03-25
| | | | | | | | | | | | | | With the combination of PNPACPI and 8250_pnp, we no longer need 8250_acpi. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] icom: select FW_LOADERmaximilian attems2006-03-25
| | | | | | | | | | | | | | | | The icom driver uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: maximilian attems <maks@sternwelten.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-03-25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits) BUG_ON() Conversion in drivers/video/ BUG_ON() Conversion in drivers/parisc/ BUG_ON() Conversion in drivers/block/ BUG_ON() Conversion in sound/sparc/cs4231.c BUG_ON() Conversion in drivers/s390/block/dasd.c BUG_ON() Conversion in lib/swiotlb.c BUG_ON() Conversion in kernel/cpu.c BUG_ON() Conversion in ipc/msg.c BUG_ON() Conversion in block/elevator.c BUG_ON() Conversion in fs/coda/ BUG_ON() Conversion in fs/binfmt_elf_fdpic.c BUG_ON() Conversion in input/serio/hil_mlc.c BUG_ON() Conversion in md/dm-hw-handler.c BUG_ON() Conversion in md/bitmap.c The comment describing how MS_ASYNC works in msync.c is confusing rcu: undeclared variable used in documentation fix typos "wich" -> "which" typo patch for fs/ufs/super.c Fix simple typos tabify drivers/char/Makefile ...
| * | fix typos "wich" -> "which"Uwe Zeisberger2006-03-24
| |/ | | | | | | | | Signed-off-by: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | [PATCH] serial: merge mpsc.h into mpsc.cMark A. Greer2006-03-25
| | | | | | | | | | | | | | | | | | Merge mpsc.h into mpsc.c because its the only file that #include's mpsc.h. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] serial: mpsc driver has definition of SUPPORT_SYSRQ below include of ↵Mark A. Greer2006-03-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | serial_core.h The definition of SUPPORT_SYSRQ must come before #include of serial_core.h. This patch moves the definition of SUPPORT_SYSRQ to be just after the #include of config.h to make it consistent with 8250.c. Reported-by: Stephane Chazelas <Stephane@artesyncp.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] serial: mpsc driver passes bad devname to request_irq()Mark A. Greer2006-03-25
| | | | | | | | | | | | | | | | | | | | | | | | | | The devname passed to request_irq() contained a '/' which is wrong. At a minimum, the '/' prevented the devname from showing up in /proc/irq/<irq>/<devname>. This patch replaces the '/' with a '-' to fixes that problem. Reported-by: Stephane Chazelas <Stephane@artesyncp.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Altix: rs422 support for ioc4 serial driverPat Gefre2006-03-25
| | | | | | | | | | | | | | | | Add rs422 support to the Altix ioc4 serial driver. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] hp300: fix driver_register() return handling, remove dio_module_init()Bjorn Helgaas2006-03-25
|/ | | | | | | | | | | | | | | | | | | | | | | Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. dio_module_init() used the device count to automatically unregister and unload drivers that found no devices. That might have worked at one time, but has been broken for some time because dio_register_driver() returned either a negative error or a positive count (never zero). So it could only unregister on failure, when it's not needed anyway. This functionality could be resurrected in individual drivers by counting devices in their .probe() methods. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Philip Blundell <philb@gnu.org> Cc: Jochen Friedrich <jochen@scram.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kill _INLINE_Adrian Bunk2006-03-23
| | | | | | | | | | | This patch removes all occurances of _INLINE_ in the kernel. With the exception of tty_flip.h, I've simply removed the inline's since gcc should know best which functions to be inlined. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-03-22
|\ | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Merge avlab serial board entries in parport_serial [SERIAL] kernel console should send CRLF not LFCR
| * [SERIAL] kernel console should send CRLF not LFCRRussell King2006-03-20
| | | | | | | | | | | | | | | | | | | | | | Glen Turner reported that writing LFCR rather than the more traditional CRLF causes issues with some terminals. Since this aflicts many serial drivers, extract the common code to a library function (uart_console_write) and arrange for each driver to supply a "putchar" function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [PATCH] vr41xx: convert to the new platform device interfaceDmitry Torokhov2006-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch does the following for v441xx seris drivers: - stop using platform_device_register_simple() as it is going away - mark ->probe() and ->remove() methods as __devinit and __devexit respectively - initialize "owner" field in driver structure so there is a link from /sys/modules to the driver - mark *_init() and *_exit() functions as __init and __exit Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] serial: serial_txx9 driver updateAtsushi Nemoto2006-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the serial_txx9 driver. * More strict check in verify_port. Cleanup. * Do not insert a char caused previous overrun. * Fix some spin_locks. * Do not call uart_add_one_port for absent ports. Also, this patch removes a BROKEN tag from Kconfig. This driver has been marked as BROKEN by removal of uart_register_port, but it has been solved already on Sep 2005. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] handle errors returned by platform_get_irq*()David Vrabel2006-03-20
| | | | | | | | | | | | | | | | | | platform_get_irq*() now returns on -ENXIO when the resource cannot be found. Ensure all users of platform_get_irq*() handle this error appropriately. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [SUNSU]: Fix missing spinlock initialization.David S. Miller2006-03-20
| | | | | | | | | | | | Caught by CONFIG_DEBUG_SPINLOCK. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC] serial: Make sure sysfs nodes get named correctly.David S. Miller2006-03-20
| | | | | | | | | | | | | | | | | | | | | | | | | | Because we play this trick where we use ttyS? in increasing minor numbers for different sunfoo.c drivers, we have to inform the TTY layer of this. Do so by setting the tty->name_base appropriately. Probably there should be a generic way to do this in the serial core, but for now... Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC64] sunhv: Fix locking in sunhv_start_tx()David S. Miller2006-03-20
| | | | | | | | | | | | | | | | | | | | Caller takes the lock already. Also, fixup the poll loop in sunhv_break_ctl(). Just like in console write, we udelay(2) and use a loop limit of 1000000 iterations. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC64]: Put sunhv.o earliest in the list of sparc serial drivers.David S. Miller2006-03-20
| | | | | | | | | | | | | | | | So that it will show up as /dev/ttyS0. Otherwise things like installers will try to run on whatever serial port gets probed first. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC64] sunhv: Support SYSRQ properly.David S. Miller2006-03-20
| | | | | | | | | | | | | | | | | | | | | | By calling uart_handle_break(). We'll still do the "sun_do_break()" handling if the user gives two breaks in a row. We should probably do this in the other Sparc serial drivers too. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC64]: Fix OOPS on sunhv interrupts.David S. Miller2006-03-20
| | | | | | | | | | | | | | | | | | Until the uart is openned, port->info is NULL. Also, init the port->irq properly and give a non-zero port->membase so that the uart device reporting is done. Signed-off-by: David S. Miller <davem@davemloft.net>
* | [SPARC64]: Decode virtual-devices interrupts correctly.David S. Miller2006-03-20
| | | | | | | | | | | | Need to translate through the interrupt-map{,-mask] properties. Signed-off-by: David S. Miller <davem@davemloft.net>