aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAge
* [SCSI] sr.c: Fix getting wrong sizePete Zaitcev2005-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here's the problem. Try to do this on 2.6.12: - Kill udev and HAL - Insert a CD-ROM into a SCSI or USB CD-ROM drive - Run dd if=/dev/scd0 - cat /sys/block/sr0/size - Eject the CD, insert a different one - Run dd if=/dev/scd0 This is likely to do "access beyond the end of device", if you let it - cat /sys/block/sr0/size This shows the size of a previous CD, even though dd was supposed to revalidate the device. - Run dd if=/dev/scd0 The second run of dd works correctly! The bug was introduced in 2.5.31, when Al fixes the recursive opens in partitioning. Before, the code worked like this: - Block layer called cdrom_open directly - cdrom_open called sr_open - sr_open called check_disk_change - check_disk_change called sr_media_change - sr_media_change did cd->needs_disk_change=1 - before returning sr_open tested cd->needs_disk_change and called get_sector_size. In 2.6.12, the check_disk_change is called from cdrom_open only. Thus: - Block layer calls sr_bd_open - sr_bd_open calls cdrom_open - cdrom_open calls sr_open - sr_open tests cd->needs_disk_change, which wasn't set yet; returns - cdrom_open calls check_disk_change - check_disk_change calls sr_media_change - sr_media_change does cd->needs_disk_change=1, but nobody cares Acked by: Alexander Viro <aviro@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] ibmvscsi timeout fixDave C Boutcher2005-08-28
| | | | | | | | | | | | | This patch fixes a long term borkenness in ibmvscsi where we were using the wrong timeout field from the scsi command (and using the wrong units.) Now broken by the fact that the scsi_cmnd timeout field is gone entirely. This only worked before because all the SCSI targets assumed that 0 was default. Signed-off-by: Dave Boutcher <boutcher@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] drivers/scsi/constants.c should include scsi_dbg.hAdrian Bunk2005-08-28
| | | | | | | | C files should include the files with the prototypes for their global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] ibmvscsi eh lockingDave C Boutcher2005-08-28
| | | | | | | | | With the removal of the spinlocking around eh calls, we need to add a little more locking back in, otherwise we do some naked list manipulation. Signed-off-by: Dave Boutcher <boutcher@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: Fix aacraid probe breakage (updated)Mark Haverkamp2005-08-28
| | | | | | | | This patch fixes the bad assumption of the aacraid driver with use_sg. I used the 3w-xxxx driver fix as a guide for this. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aiclib remove deadChristoph Hellwig2005-08-15
| | | | | | | | remove lots of completely dead code from aiclib, there's not a lot left and even what's left is rather useless. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: sane pci probingChristoph Hellwig2005-08-15
| | | | | | | remove ahd_tailq and do sane pci probing. ported over from aic7xxx. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: remove some dead codeChristoph Hellwig2005-08-15
| | | | | | | remove some dead cruft, as done already in aic7xxx Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] correct transport class abstraction to work outside SCSIJames Bottomley2005-08-14
| | | | | | | | | | | | | | | | I recently tried to construct a totally generic transport class and found there were certain features missing from the current abstract transport class. Most notable is that you have to hang the data on the class_device but most of the API is framed in terms of the generic device, not the class_device. These changes are two fold - Provide the class_device to all of the setup and configure APIs - Provide and extra API to take the device and the attribute class and return the corresponding class_device Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] add ability to deny binding to SPI transport classJames Bottomley2005-08-14
| | | | | | | | | This patch is necessary if we begin exposing underlying physical disks (which can attach to the SPI transport class) of the hardware RAID cards, since we don't want any SPI parameters binding to the RAID devices. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic7xxx: lost multifunction flags handlingJames Bottomley2005-08-13
| | | | | | | | | From: Christoph Hellwig <hch@lst.de> Multi-function cards need to inherit the PCI flags from the master PCI device. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fix warning in aic7770.cakpm@osdl.org2005-08-12
| | | | | | | | | | From: "Martin J. Bligh" <mbligh@mbligh.org> drivers/scsi/aic7xxx/aic7770.c: In function `aic7770_config': drivers/scsi/aic7xxx/aic7770.c:129: warning: unused variable `l' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fix warning in scsi_softirqakpm@osdl.org2005-08-12
| | | | | | | | | | From: Andrew Morton <akpm@osdl.org> drivers/scsi/scsi.c: In function `scsi_softirq': drivers/scsi/scsi.c:814: warning: int format, long int arg (arg 4) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc driver 8.0.30 : update version to 8.0.30James.Smart@Emulex.Com2005-08-12
| | | | | Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc driver 8.0.30 : convert to use of int_to_scsilun()James.Smart@Emulex.Com2005-08-12
| | | | | | | | | | | | | | Replace use of lpfc_put_lun with midlayer's int_to_scsilun Remove driver's local definition of lpfc_put_lun (which converts an int back to a 64-bit LUN) and replace it's use with the recently added int_to_scsilun function provided by the midlayer. Note: Embedding midlayer structure in our structure caused need for more files to include midlayer headers. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc driver 8.0.30 : dev_loss and nodev timeoutsJames.Smart@Emulex.Com2005-08-12
| | | | | | | | | | | | | | | | | | | | Fix handling of the dev_loss and nodev timeouts. Symptoms: when remote port disappears for a period of time longer then either nodev_tmo or dev_loss_tmo, the lpfc driver worker thread will stall removing that remote port. Cause: removing remote port involves un-blocking and sync-ing corresponding block device queue. But corresponding node in the lpfc driver is still in the NPR(?node port recovery?) state and mid-layer gets SCSI_MLQUEUE_HOST_BUSY as a return value when it is trying to call queuecommand() with command for that node (AKA remote port) Fix: Instead of returning SCSI_MLQUEUE_HOST_BUS from queuecommand() for nodes in NPR states complete it with retry-able error code DID_BUS_BUSY Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc driver 8.0.30 : fix get_stats panicJames.Smart@Emulex.Com2005-08-12
| | | | | | | | | | | | | | | | | | Fix panic in lpfc_get_stats() Symptoms: Panic on sysfs stats access Cause: In lpfc_get_stats() we are writing to memory that we do not own. Fix: Fix our stats structure allocation. Embed phba->link_stats in struct lpfc_hba and stop treating it like rogue structure. Note: Embedding midlayer/transport structure in our structure caused need for more files to include midlayer/transport headers. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc driver 8.0.30 : task mgmt bit clearingJames.Smart@Emulex.Com2005-08-12
| | | | | | | | | | Clear task management bits when preparing SCSI commands In lpfc_scsi_prep_cmnd, clear the task management bits (fcpCntl2 member in the fcp_cmd structure) when preparing regular SCSI commands. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc driver 8.0.30 : fix lip/cablepull panicJames.Smart@Emulex.Com2005-08-12
| | | | | | | | | | | | | | Fix panic on lip and cable pull Symptoms: Panic on lip or cable pull Cause: Use after free of nlp in lpfc_nlp_remove() Fix: Do not make FC transport calls after a node is removed. Transport calls are disabled by ignoring the initial delete transition. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] lpfc driver 8.0.30 : fix iocb reuse initializationJames.Smart@Emulex.Com2005-08-12
| | | | | | | | | | | | | IOCB BDE not getting fully initialized during reuse Symptoms: Driver gets Status 3 and Reason 0x13 on IOCB completions. Cause: The IOCB bpl.bdeSize and bdeFlags are not getting initialized on reuse. Fix: Reinitialize these fields in prep_dma each time an IOCB is used. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Make the HSG80 a REPORTLUN2 deviceJames Bottomley2005-08-12
| | | | | | | | | | | From: Steve Wilcox <spwilcox@att.com> In order to properly report LUN's > 7, the DEC HSG80 definition in scsi_devinfo.c needs to include BLIST_REPORTLUN2 rather than BLIST_SPARSELUN. I've tested this change with several HSG firmware revisions and with both Emulex and Qlogic HBA's. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: fix boot panic with no hardwareJames Bottomley2005-08-09
| | | | | | | | There's a spurious (and illegal since it's marked __exit) call to ahc_linux_exit() in ahc_linux_init() which causes a double list deletion of the transport class; remove it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] blacklist addition.Dave Jones2005-08-08
| | | | | | | | | | | | | When run on a kernel that scans all LUNs, a certain crappy scsi scanner reports the same LUN over and over.. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=155457 Aparently they were so shamed by this, they chose to remain anonymous. Though it seems the blacklist code handles anonymous vendors just fine. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: adapter support updateMark Haverkamp2005-08-08
| | | | | | | | | | | | Received from Mark Salyzyn This patch adds the product ID for the ICP9067MA adapter. The entries for the ICP9085LI, ICP5085BR, IBM8k & ASR4810SAS were incorrect and would not initialize the adapters correctly. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] add global timeout to the scsi mid-layerJames Bottomley2005-08-08
| | | | | | | | | | | | | | | | | | There are certain rogue devices (and the aic7xxx driver) that return BUSY or QUEUE_FULL forever. This code will apply a global timeout (of the total number of retries times the per command timer) to a given command. If it is exceeded, the command is completed regardless of its state. The patch also removes the unused field in the command: timeout and timeout_total. This solves the problem of detecting an endless loop in the mid-layer because of BUSY/QUEUE_FULL bouncing, but will not recover the device. In the aic7xxx case, the driver can be recovered by sending a bus reset, so possibly this should be tied into the error handler? Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] drivers/scsi/st.c: add reference count and related fixesKai Makisara2005-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have rediffed the patch against 2.6.13-rc5, done a couple of cosmetic cleanups, and run some tests. Brian King has acknowledged that it fixes the problems he has seen. Seems mature enough for inclusion into 2.6.14 (or later)? Nate's explanation of the changes: I've attached patches against 2.6.13rc2. These are basically identical to my earlier patches, as I found that all issues I'd seen in earlier kernels still existed in this kernel. To summarize, the changes are: (more details in my original email) - add a kref to the scsi_tape structure, and associate reference counting stuff - set sr_request->end_io = blk_end_sync_rq so we get notified when an IO is rejected when the device goes away - check rq_status when IOs complete, else we don't know that IOs rejected for a dead device in fact did not complete - change last_SRpnt so it's set before an async IO is issued (in case st_sleep_done is bypassed) - fix a bogus use of last_SRpnt in st_chk_result Signed-off-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: correct use of cmd->timeout fieldJames Bottomley2005-08-08
| | | | | | | | | | | | The cmd->timeout field has been obsolete for a while now. While looking to remove it, I came across this use in the aacraid driver. It looks like you want to initialise the firmware with the current timeout of the command (in seconds), so the value I think you should be using is cmd->timeout_per_command. Acked by: Mark Haverkamp <markh@osdl.org> Acked by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: needs to select SPI_TRANSPORT_ATTRSakpm@osdl.org2005-08-07
| | | | | | | | | | | | | | | | | without it you get this failure: drivers/built-in.o(.text+0xdcccd): In function `ahd_linux_slave_configure': drivers/scsi/aic7xxx/aic79xx_osm.c:636: undefined reference to `spi_dv_device' drivers/built-in.o(.text+0xdd7b1): In function `ahd_send_async': drivers/scsi/aic7xxx/aic79xx_osm.c:1652: undefined reference to `spi_display_xfer_agreement' drivers/built-in.o(.init.text+0x7b4d): In function `ahd_linux_init': drivers/scsi/aic7xxx/aic79xx_osm.c:2765: undefined reference to `spi_attach_transport' drivers/built-in.o(.init.text+0x7c94):drivers/scsi/aic7xxx/aic79xx_osm.c:2774: undefined reference to `spi_release_transport' drivers/built-in.o(.exit.text+0x72c): In function `ahd_linux_exit': drivers/scsi/aic7xxx/aic79xx_osm.c:2783: undefined reference to `spi_release_transport' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: sgraw command supportMark Haverkamp2005-08-05
| | | | | | | | | | | | | Received from Mark Salyzyn from Adaptec: This patch adds support for the new raw io command. This new command offers much larger io commands, is more friendly to the internal firmware structure requiring less translation efforts by the firmware and offers support for targets greater than 2TB (patch to support >2TB will be sent in the future). Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: aif registration timeout fixMark Haverkamp2005-08-05
| | | | | | | | | | | | | | | | | | | Received from Mark Salyzyn from Adaptec: If the Adapter is quiet and does not produce an AIF event packets to be picked up by the management applications for longer than the timeout interval of two minutes, the cleanup code that deals with aging out registrants could erroneously drop the registration. The timeout is there to clean up should the management application die and fail to poll for updated AIF event packets. Moving the timer update from the ioctl code that delivers an AIF to the polling registrant to the bottom of the ioctl means the timeout is reset with any management application polling activity regardless if an AIF is delivered or not removing the erroneous timeout cleanups. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: remove duplicate io callback codeMark Haverkamp2005-08-05
| | | | | | | | | | | | Received from Mark Salyzyn from Adaptec: This patch removes the duplicate code in the write_callback command completion handler, and renames read_callback to io_callback. Optimized the lba calculation into the debug print routine macro to optimize the i/o code path. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: driver shutdown methodMark Haverkamp2005-08-05
| | | | | | | | | | Add in pci shutdown method so that the adapter shuts down correctly and flushes its cache. Shutdown should also disable the adapter's interrupt when shutdown (in particularly if the driver is rmmod'd) to prevent spurious hardware activities. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: driver version updateMark Haverkamp2005-08-05
| | | | | | | | | | | | Received from Mark Salyzyn from Adaptec. Fixes a bug in check_revision. It should return the driver version not the firmware version. Update driver version number. Update driver version string. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aacraid: interupt mitigationMark Haverkamp2005-08-05
| | | | | | | | | | | | | | | | | | | | | Received from Mark Salyzyn from Adaptec: If more than two commands are outstanding to the controller, there is no need to notify the adapter via a PCI bus transaction of additional commands added into the queue; it will get to them when it works through the produce/consumer indexes. This reduced the PCI traffic in the driver to submit a command to the queue to near zero allowing a significant number of commands to be turned around with no need to block for the PCI bridge to flush the notify request to the adapter. Interrupt mitigation has always been present in the driver; it was turned off because of a bug that prevented one from realizing the usefulness of the feature. This bug is fixed in this patch. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic7xxx/79xx: fix another potential panic due to a non existent targetJames Bottomley2005-08-05
| | | | | | I ran into this one sending bus resets across the hardware. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic7xxx: upport all sequencer and core fixes from adaptec version 6.3.9James Bottomley2005-08-04
| | | | | | | This patch upports all relevant code fixes and bumps the driver version to 7.0 to signify starting a new tree. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: fixup DT settingHannes Reinecke2005-08-04
| | | | | | | | | | this patch is just a cross-port of the fixup for aic7xxx DT settings. As the same restrictions apply for aic79xx also (DT requires wide transfers) the dt setting routine should be modified equivalently. And an invalid period setting will be caught by ahd_find_syncrate() anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: add hold_mcs to the transport parametersJames Bottomley2005-08-03
| | | | | | since this card can support the setting, add it to the parameter list. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] add missing hold_mcs parameter to the spi transport classJames Bottomley2005-08-03
| | | | | | | | | | | | | | | | | This parameter is important only to people who take the time to tune the margin control settings, otherwise it's completely irrelevant. However, just in case anyone should want to do this, it's appropriate to include the parameter. I don't do anything with it in DV by design, so the parameter will come up as off by default, so if anyone actually wants to play with the margin control settings they'll have to enable it under the spi_transport class first. I also updated the transfer settings display to report all of the PPR settings instead of only DT, IU and QAS Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: fix up transport settingsJames Bottomley2005-08-03
| | | | | | | | | | | | | | | There's a slight problem in the way you've done the transport parameters; reading from the variables actually produces the current settings, not the ones you just set (and there's usually a lag because devices don't renegotiate until the next command goes over the bus). If you set the bit immediately, you get into the situation where the transport parameters report something as being set even if the drive cannot support it. I patched the driver to do it this way and also corrected a panic in the proc routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: DV parameter settingsHannes Reinecke2005-08-03
| | | | | | | | This patch updates various scsi_transport_spi parameters with the actual parameters used by the driver internally. Domain Validation for all devices should now work properly. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: update to use scsi_transport_spiHannes Reinecke2005-08-03
| | | | | | | | | This patch updates the aic79xx driver to take advantage of the scsi_transport_spi infrastructure. Patch is quite a mess as some procedures have been reshuffled to be closer to the aic7xxx driver. Rejections fixed and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] aic79xx: Remove busyqHannes Reinecke2005-08-03
| | | | | | | | | | | | | From: Jeff Garzik <jgarzik@pobox.com> This patch removes the busyq in aic79xx and uses the command-queue from the midlayer instead. Additionally some dead code is removed. Signed-off-by: Hannes Reinecke <hare@suse.de> Fixed rejections Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla1280: endianess annotationsChristoph Hellwig2005-08-02
| | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla1280: don't use bitfields for hardware access, parametersChristoph Hellwig2005-08-02
| | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thiemo Seufer <ths@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla1280: don't use bitfields for hardware access in isp_configChristoph Hellwig2005-08-02
| | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thiemo Seufer <ths@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla1280: always load microcodeChristoph Hellwig2005-08-02
| | | | | | | we have the most recent microcode, make sure to always load it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla1280: remove SG_SEGMENTSChristoph Hellwig2005-08-02
| | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thiemo Seufer <ths@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla1280: use SAM_ constantsChristoph Hellwig2005-08-02
| | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thiemo Seufer <ths@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] qla1280: misc cleanupsChristoph Hellwig2005-08-02
| | | | | | | | print message tidy ups and some excess brace removal. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thiemo Seufer <ths@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-28 00:30:34 -0500