aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/sun3_scsi.c
Commit message (Collapse)AuthorAge
* atari_NCR5380: Remove RESET_RUN_DONE macroFinn Thain2014-11-20
| | | | | | | | | | There's no need to run the cmd->done callback for aborted commands. Remove the old EH code and the RESET_RUN_DONE macro. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* atari_NCR5380: Introduce FLAG_TAGGED_QUEUINGFinn Thain2014-11-20
| | | | | | | | | | | | | | | | The static variable setup_use_tagged_queuing is declared in mac_scsi.c, sun3_scsi.c and atari_scsi.c and doesn't belong in the core driver. None of the other NCR5380 drivers suffer from this layering issue which makes merging the core drivers more difficult and will likely hinder plans for future use of platform data to configure the driver. Replace the static variable with a host flag. This way it can be reported along with the other flags. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* sun3_scsi: Adopt atari_NCR5380 core driver and remove sun3_NCR5380.cFinn Thain2014-11-20
| | | | | | | | | Given the preceding changes to atari_NCR5380.c, this patch should not change behaviour of the sun3_scsi and sun3_scsi_vme modules. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove ENABLE_IRQ/DISABLE_IRQ macrosFinn Thain2014-11-20
| | | | | | | | | | atari_NCR5380.c enables its IRQ when it is already enabled. Sun3 doesn't use the ENABLE_IRQ/DISABLE_IRQ cruft. Remove it. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* sun3_scsi: Move macro definitionsFinn Thain2014-11-20
| | | | | | | | | | | | | | The #defines in sun3_scsi.h are intended to influence subsequent #includes in sun3_scsi.c. IMHO, that's too convoluted. Move sun3_scsi.h macro definitions to sun3_scsi.c, consistent with other NCR5380 drivers. Omit the unused NCR5380_local_declare() and NCR5380_setup() macros. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* sun3_scsi: Convert to platform deviceFinn Thain2014-11-20
| | | | | | | | | Convert sun3_scsi to platform device and eliminate scsi_register(). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Drop legacy scsi.h includeFinn Thain2014-11-20
| | | | | | | | | | | Convert Scsi_Cmnd to struct scsi_cmnd and drop the #include "scsi.h". The sun3_NCR5380.c core driver already uses struct scsi_cmnd so converting the other core drivers reduces the diff which makes them easier to unify. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove *_RELEASE macrosFinn Thain2014-11-20
| | | | | | | | | | | The *_RELEASE macros don't tell me anything. In some cases the version in the macro contradicts the version in the comments. Anyway, the Linux kernel version is sufficient information. Remove these macros to improve readability. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove pointless compiler command line override macrosFinn Thain2014-11-20
| | | | | | | | | | | Compile-time override of scsi host defaults is pointless for drivers that provide module parameters and __setup options for that. Too many macros make the code hard to read so remove them. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Cleanup host info() methodsFinn Thain2014-11-20
| | | | | | | | | | | | | | | | | | | | | | If the host->info() method is not set, then host->name is used by default. For atari_scsi, that is exactly the same text. So remove the redundant info() method. Keep sun3_scsi.c in line with atari_scsi. Some NCR5380 drivers return an empty string from the info() method (arm/cumana_1.c arm/oak.c mac_scsi.c) while other drivers use the default (dmx3191d dtc.c g_NCR5380.c pas16.c t128.c). Implement a common info() method to replace a lot of duplicated code which the various drivers use to announce the same information. This replaces most of the (deprecated) show_info() output and all of the NCR5380_print_info() output. This also eliminates a bunch of code in g_NCR5380 which just duplicates functionality in the core driver. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Fix SCSI_IRQ_NONE bugsFinn Thain2014-11-20
| | | | | | | | | | | | | | | | | | | | | | | | | Oak scsi doesn't use any IRQ, but it sets irq = IRQ_NONE rather than SCSI_IRQ_NONE. Problem is, the core NCR5380 driver expects SCSI_IRQ_NONE if it is to issue IDENTIFY commands that prevent target disconnection. And, as Geert points out, IRQ_NONE is part of enum irqreturn. Other drivers, when they can't get an IRQ or can't use one, will set host->irq = SCSI_IRQ_NONE (that is, 255). But when they exit they will attempt to free IRQ 255 which was never requested. Fix these bugs by using NO_IRQ in place of SCSI_IRQ_NONE and IRQ_NONE. That means IRQ 0 is no longer probed by ISA drivers but I don't think this matters. Setting IRQ = 255 for these ISA drivers is understood to mean no IRQ. This remains supported so as to avoid breaking existing ISA setups (which can be difficult to get working) and because existing documentation (SANE, TLDP etc) describes this usage for the ISA NCR5380 driver options. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove duplicate commentsFinn Thain2014-11-20
| | | | | | | | | | The LIMIT_TRANSFERSIZE, PSEUDO_DMA, PARITY and UNSAFE options are all documented in the core drivers where they are used. The same goes for the chip databook reference. Remove the duplicate comments. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove redundant AUTOSENSE macroFinn Thain2014-11-20
| | | | | | | | | | Every NCR5380 driver sets AUTOSENSE so it need not be optional (and the mid-layer expects it). Remove this redundant macro to improve readability. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove useless prototypesFinn Thain2014-11-20
| | | | | | | | | | | | Add missing static qualifiers and remove the now pointless prototypes. The NCR5380_* prototypes are all declared in NCR5380.h and renamed using macros. Further declarations are redundant (some are completely unused). Remove them. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove unused macrosFinn Thain2014-11-20
| | | | | | | | | | | Some macros are never evaluated (i.e. FOO, USLEEP, SCSI2 and USE_WRAPPER; and in some drivers, NCR5380_intr and NCR5380_proc_info). DRIVER_SETUP serves no purpose anymore. Remove these macro definitions. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* ncr5380: Remove unused hostdata fieldsFinn Thain2014-11-20
| | | | | | | | | Remove unused fields from hostdata structs declared with the NCR5380_implementation_fields macro. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi/NCR5380: merge sun3_scsi_vme.c into sun3_scsi.cFinn Thain2014-05-28
| | | | | | | | | | | | | | The sun3 drivers suffer from a whole bunch of duplicated code. Fix this by following the g_NCR5380_mmio example. (Notionally, sun3_scsi relates to sun3_scsi_vme in the same way that g_NCR5380 relates to g_NCR5380_mmio.) Dead code is also removed: we now have working debug macros so SUN3_SCSI_DEBUG is undesirable. Dead code within #ifdef OLD_DMA is also dropped, consistent with sun3_scsi_vme.c. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi/NCR5380: reduce depth of sun3_scsi nested includesFinn Thain2014-05-28
| | | | | | | | | | | | Move the #include "NCR5380.h" out of the sun3_scsi.h header file and into the driver .c files, like all the other NCR5380 drivers in the tree. This improves uniformity and reduces the depth of nested includes. The sequence of #include's, #define's and #if's no longer does my head in. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi/NCR5380: fix and standardize NDEBUG macrosFinn Thain2014-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All three NCR5380 core driver implementations share the same NCR5380.h header file so they need to agree on certain macro definitions. The flag bit used by the NDEBUG_MERGING macro in atari_NCR5380 and sun3_NCR5380 collides with the bit used by NDEBUG_LISTS. Moreover, NDEBUG_ABORT appears in NCR5380.c so it should be defined in NCR5380.h rather than in each of the many drivers using that core. An undefined NDEBUG_ABORT macro caused compiler errors and led to dodgy workarounds in the core driver that can now be removed. (See commits f566a576bca09de85bf477fc0ab2c8c96405b77b and 185a7a1cd79b9891e3c17abdb103ba1c98d6ca7a.) Move all of the NDEBUG_ABORT, NDEBUG_TAGS and NDEBUG_MERGING macro definitions into NCR5380.h where all the other NDEBUG macros live. Also, incorrect "#ifdef NDEBUG" becomes "#if NDEBUG" to fix the warning: drivers/scsi/mac_scsi.c: At top level: drivers/scsi/NCR5380.c:418: warning: 'NCR5380_print' defined but not used drivers/scsi/NCR5380.c:459: warning: 'NCR5380_print_phase' defined but not used The debugging code is now enabled when NDEBUG != 0. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi/NCR5380: use NCR5380_dprint() instead of NCR5380_print()Finn Thain2014-05-28
| | | | | | | | | | Only the NCR5380_dprint() macro should invoke the NCR5380_print() function. That's why NCR5380.c only defines the function #if NDEBUG. Use the standard macro. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
* scsi/NCR5380: remove old CVS keywordsFinn Thain2014-05-28
| | | | | | Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
* m68k/atari - atari_scsi: change abort/reset return codesMichael Schmitz2014-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | [Resend of earlier patch - added equivalent changes to sun3 NCR5380 code] The abort/reset lowlevel return codes had changed with the new error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this. Change reset handling for Atari to clear queues only, do not attempt to call done() on each command aborted by the reset. The EH code should do that for us. Queues _must_ be cleared, otherwise atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking further error recovery. Update the Sun3 NCR5380 driver as well - the Sun3 driver was derived from the Atari one. Kudos to Finn Thain for the Sun3 part and cleaning up the header files. After the header cleanup, the initio.h include (!) can be dropped from sun3_scsi.h now. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Sam Creasey <sammy@sammy.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James E.J. Bottomley <JBottomley@parallels.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
* sun3_scsi: add ->show_info()Geert Uytterhoeven2013-05-04
| | | | | | | Based on Al's changes to atari_scsi. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Remove all #inclusions of asm/system.hDavid Howells2012-03-28
| | | | | | | | | Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
* [SCSI] sun3: Add various missing NDEBUG* definitionsGeert Uytterhoeven2011-06-29
| | | | | | | | | | | | This fixes a.o.: drivers/scsi/sun3_scsi.h:225:5: warning: "NDEBUG" is not defined drivers/scsi/sun3_scsi.h:345:14: warning: "NDEBUG_ABORT" is not defined drivers/scsi/sun3_scsi.h:351:14: warning: "NDEBUG_TAGS" is not defined drivers/scsi/sun3_scsi.h:357:14: warning: "NDEBUG_MERGING" is not defined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] sun3: Provide a dummy NCR5380_exit()Geert Uytterhoeven2011-06-29
| | | | | | | | | | | and call it from sun3scsi_release(), cfr. the other NCR5380 drivers. This fixes: drivers/scsi/NCR5380.h:303: warning: ‘NCR5380_exit’ declared ‘static’ but never defined Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] sun3: sun3scsi_detect() and NCR5380_init() should be __initGeert Uytterhoeven2011-06-29
| | | | | | | | | | WARNING: vmlinux.o(.text+0x18545c): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() WARNING: vmlinux.o(.text+0x18556c): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() WARNING: vmlinux.o(.text+0x187692): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() WARNING: vmlinux.o(.text+0x187770): Section mismatch in reference from the function sun3scsi_detect() to the function .init.text:NCR5380_print_options() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* block: remove wrappers for request type/flagsChristoph Hellwig2010-08-07
| | | | | | | | | Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* [SCSI] NCR5380: Fix bugs and canonicalize irq handler usageJeff Garzik2007-11-25
| | | | | | | | | | | | | | | | | | | | | | * Always pass the same value to free_irq() that we pass to request_irq(). This fixes several bugs. * Always call NCR5380_intr() with 'irq' and 'dev_id' arguments. Note, scsi_falcon_intr() is the only case now where dev_id is not the scsi_host. * Always pass Scsi_Host to request_irq(). For most cases, the drivers already did so, and I merely neated the source code line. In other cases, either NULL or a non-sensical value was passed, verified to be unused, then changed to be Scsi_Host in anticipation of the future. In addition to the bugs fixes, this change makes the interface usage consistent, which in turn enables the possibility of directly referencing Scsi_Host from all NCR5380_intr() invocations. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Sun3 SCSI: Make sun3 scsi drivers compile/work againSam Creasey2006-12-09
| | | | | | | | | | Make sun3 scsi drivers compile/work again (though with way too many warnings...) Tested on 3/50, 3/60. Signed-off-by: Sam Creasey <sammy@sammy.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SCSI] Scsi_Cmnd convertion in sun3-driverHenne2006-10-25
| | | | | | | Change the obsolete Scsi_Cmnd to struct scsi_cmnd in the sun3-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] Split struct request ->flags into two partsJens Axboe2006-09-30
| | | | | | | | | | Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <axboe@suse.de>
* [SCSI] remove Scsi_Host_Template typedefChristoph Hellwig2005-11-09
| | | | Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!