aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_priv.h
Commit message (Collapse)AuthorAge
* PM/Hibernate: Wait for SCSI devices scan to complete during resumeRafael J. Wysocki2009-04-13
| | | | | | | | | | | | | | There is a race between resume from hibernation and the asynchronous scanning of SCSI devices and to prevent it from happening we need to call scsi_complete_async_scans() during resume from hibernation. In addition, if the resume from hibernation is userland-driven, it's better to wait for all device probes in the kernel to complete before attempting to open the resume device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] modify scsi to handle new fail fast flags.Mike Christie2008-10-13
| | | | | | | | | | | | | | | | | | | | | | | | This checks the errors the scsi-ml determined were retryable and returns if we should fast fail it based on the request fail fast flags. Without the patch, drivers like lpfc, qla2xxx and fcoe would return DID_ERROR for what it determines is a temporary communication problem. There is no loss of connectivity at that time and the driver thinks that it would be fast to retry at the driver level. SCSI-ml will however sees fast fail on the request and DID_ERROR and will fast fail the io. This will then cause dm-multipath to fail the path and possibley switch target controllers when we should be retrying at the scsi layer. We also were fast failing device errors to dm multiapth when unless the scsi_dh modules think otherwis we want to retry at the scsi layer because multipath can only retry the IO like scsi should have done. multipath is a little dumber though because it does not what the error was for and assumes that it should fail the paths. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* block: unify request timeout handlingJens Axboe2008-10-09
| | | | | | | | | | | | | Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] Support devices with protection informationMartin K. Petersen2008-07-26
| | | | | | | | | | | | | | | | | Implement support for DMA of protection information for devices that are data integrity capable. - Add support for mapping an extra scatter-gather list containing the protection information. - Allocate protection scsi_data_buffer if host is DIX (integrity DMA) capable. - Accessor function for checking whether a device has protection enabled. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] use default attributes for scsi_hostHannes Reinecke2008-04-22
| | | | | | | | | | This patch removes the unused sysfs attibute overwriting logic for the scsi host attibutes, and plugs them into the driver core default attribute creation. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""Linus Torvalds2008-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d. It turns out that the bug that was triggered by that commit was apparently not actually triggered by that commit at all, and just the testing conditions had changed enough to make it appear to be due to it. The real problem seems to have been found by Peter Osterlund: "pktcdvd sets it [block device size] when opening the /dev/pktcdvd device, but when the drive is later opened as /dev/scd0, there is nothing that sets it back. (Btw, 40944 is possible if the disk is a CDRW that was formatted with "cdrwtool -m 10236".) The problem is that pktcdvd opens the cd device in non-blocking mode when pktsetup is run, and doesn't close it again until pktsetup -d is run. The effect is that if you meanwhile open the cd device, blkdev.c:do_open() doesn't call bd_set_size() because bdev->bd_openers is non-zero." In particular, to repeat the bug (regardless of whether commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not): " 1. Start with an empty drive. 2. pktsetup 0 /dev/scd0 3. Insert a CD containing an isofs filesystem. 4. mount /dev/pktcdvd/0 /mnt/tmp 5. umount /mnt/tmp 6. Press the eject button. 7. Insert a DVD containing a non-writable filesystem. 8. mount /dev/scd0 /mnt/tmp 9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null 10. If the DVD contains data beyond the physical size of a CD, you get I/O errors in the terminal, and dmesg reports lots of "attempt to access beyond end of device" errors." which in turn is because the nested open after the media change won't cause the size to be set properly (because the original open still holds the block device, and we only do the bd_set_size() when we don't have other people holding the device open). The proper fix for that is probably to just do something like bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9; in fs/block_dev.c:do_open() even for the cases where we're not the original opener (but *not* call bd_set_size(), since that will also change the block size of the device). Cc: Peter Osterlund <petero2@telia.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2008-01-03
|\ | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_sysfs: restore prep_fn when ULD is removed
| * [SCSI] scsi_sysfs: restore prep_fn when ULD is removedJames Bottomley2008-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent bug report: http://bugzilla.kernel.org/show_bug.cgi?id=9674 Was caused because the ULDs now set their own prep functions, but don't necessarily reset the prep function back to the SCSI default when they are removed. This leads to panics if commands are sent to the device after the module is removed because the prep_fn is still pointing to the old module code. The fix for this is to implement a bus remove method that resets the prep_fn pointer correctly before calling the ULD specific driver remove method. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | scsi: revert "[SCSI] Get rid of scsi_cmnd->done"Ingo Molnar2008-01-02
|/ | | | | | | | | | | | | | | | | This reverts commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d ("[SCSI] Get rid of scsi_cmnd->done") that was supposed to be a cleanup commit, but apparently it causes regressions: Bug 9370 - v2.6.24-rc2-409-g9418d5d: attempt to access beyond end of device http://bugzilla.kernel.org/show_bug.cgi?id=9370 this patch should be reintroduced in a more split-up form to make testing of it easier. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] Get rid of scsi_cmnd->doneMatthew Wilcox2007-10-12
| | | | | | | | | | | | | | | The ULD ->done callback moves into the scsi_driver. By moving the call to scsi_io_completion() from scsi_blk_pc_done() to scsi_finish_command(), we can eliminate the latter entirely. By returning 'good_bytes' from the ->done callback (rather than invoking scsi_io_completion()), we can stop exporting scsi_io_completion(). Also move the prototypes from sd.h to sd.c as they're all internal anyway. Rename sd_rw_intr to sd_done and rw_intr to sr_done. Inspired-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_error.c: Export some scsi_eh_* functionsDarrick J. Wong2007-01-27
| | | | | | | | | | Export a couple of functions from scsi_error that are needed to handle failed SCSI commands from the SAS EH. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> make exports GPL and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] kill scsi_rety_commandChristoph Hellwig2007-01-13
| | | | | | | | | | | scsi_retry_command only has a single caller, so there is no point in having this function. Additionally the memset of the sense buffer it does is entirely superflous as scsi_request_fn already calls scsi_init_cmd_errh to perform this memset before the command is reissued. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Add ability to scan scsi busses asynchronouslyMatthew Wilcox2006-10-11
| | | | | | | | | | | | | | | Since it often takes around 20-30 seconds to scan a scsi bus, it's highly advantageous to do this in parallel with other things. The bulk of this patch is ensuring that devices don't change numbering, and that all devices are discovered prior to trying to start init. For those who build SCSI as modules, there's a new scsi_wait_scan module that will ensure all bus scans are finished. This patch only handles drivers which call scsi_scan_host. Fibre Channel, SAS, SATA, USB and Firewire all need additional work. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] SCSI and FC Transport: add netlink support for posting of transport ↵James Smart2006-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] hide EH backup data outside the scsi_cmndChristoph Hellwig2006-07-09
| | | | | | | | | | | | | | | | | Currently struct scsi_cmnd has various fields that are used to backup original data after the corresponding fields have been overridden for EH commands. This means drivers can easily get at it and misuse it. Due to the old_ naming this doesn't happen for most of them, but two that have different names have been used wrong a lot (see previous patch). Another downside is that they unessecarily bloat the scsi_cmnd size. This patch moves them onstack in scsi_send_eh_cmnd to fix those two issues aswell as allowing future EH fixes like moving the EH command submissions to use SG lists like everything else. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Merge ../scsi-misc-2.6James Bottomley2006-07-03
|\ | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/scsi/nsp32.c drivers/scsi/pcmcia/nsp_cs.c Removal of randomness flag conflicts with SA_ -> IRQF_ global replacement. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] update max sdev block limitJames Smart2006-06-27
| | | | | | | | | | | | | | | | | | Updated patch to address comments from Pat Mansfield and Michael Reed: Bumped max to 600 (10mins). Set default dev_loss_tmo to a value other than the max (30s). Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
|/ | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [SCSI] remove scsi_request infrastructureChristoph Hellwig2006-06-10
| | | | | | | | | With Achim patch the last user (gdth) is switched away from scsi_request so we an kill it now. Also disables some code in i2o_scsi that was broken since the sg driver stopped using scsi_requests. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove target parent limitiationChristoph Hellwig2006-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | When James Smart fixed the issue of the userspace scan atributes crashing the system with the FC transport class he added a patch to let the transport class check if the parent is valid for a given transport class. When adding support for the integrated raid of fusion sas devices we ran into a problem with that, as it didn't allow adding virtual raid volumes without the transport class knowing about it. So this patch adds a user_scan attribute instead, that takes over from scsi_scan_host_selected if the transport class sets it and thus lets the transport class control the user-initiated scanning. As this plugs the hole about user-initiated scanning the target_parent hook goes away and we rely on callers of the scanning routines to do something sensible. For SAS this meant I had to switch from a spinlock to a mutex to synchronize the topology linked lists, in FC they were completely unsynchronized which seems wrong. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Kill the SCSI softirq handlingJens Axboe2006-01-09
| | | | | | | This patch moves the SCSI softirq handling to the block layer version. There should be no functional changes. Signed-off-by: Jens Axboe <axboe@suse.de>
* [SCSI] Convert SCSI mid-layer to scsi_execute_asyncMike Christie2005-12-14
| | | | | | | | | | | | | | | | | Add scsi helpers to create really-large-requests and convert scsi-ml to scsi_execute_async(). Per Jens's previous comments, I placed this function in scsi_lib.c. I made it follow all the queue's limits - I think I did at least :), so I removed the warning on the function header. I think the scsi_execute_* functions should eventually take a request_queue and be placed some place where the dm-multipath hw_handler can use them if that failover code is going to stay in the kernel. That conversion patch will be sent in another mail though. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] correct some dropped const compiler warningsJames Bottomley2005-12-13
| | | | | | | Make the vendor, model and rev fields in scsi_device pointers to const and update a few prototypes of functions using them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] use a completion in scsi_send_eh_cmndChristoph Hellwig2005-11-06
| | | | | | | | | | scsi_send_eh_cmnd currently uses a semaphore and an overload of eh_timer to either get a completion for a command for a timeout. Switch to using a completion and wait_for_completion_timeout to simply the code and not having to deal with the races ourselves. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] fix callers of scsi_remove_device() who already hold the scan mutedAlan Stern2005-09-09
| | | | | | | | | This patch (as544) adds a private entry point to scsi_remove_device, for use when callers already own the scan_mutex. The appropriate callers are modified to use the new entry point. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] unexport scsi_add_timer/scsi_delete_timerChristoph Hellwig2005-09-06
| | | | Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove scsi_eh_eflags_ macrosChristoph Hellwig2005-06-26
| | | | | | Just opencoded access to eh_eflags, it's much more readable anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove scsi_cmnd->ownerChristoph Hellwig2005-06-26
| | | | | | never checked anywhere Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [PATCH] make various thing staticAdrian Bunk2005-06-24
| | | | | | | | Another rollup of patches which give various symbols static scope Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] scsi: remove unused scsi_cmnd->internal_timeout field2005-04-18
| | | | | | | | scsi_cmnd->internal_timeout field doesn't have any meaning anymore. Kill the field. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 12:08:31 -0500