aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc
Commit message (Collapse)AuthorAge
* [SCSI] lpfc 8.3.24: Extend BSG infrastructure and add link diagnosticsJames Smart2011-05-26
| | | | | | | | | | | | | | Extend BSG infrastructure and add link diagnostics: - Removed unnecessary copies in handling pass-through mbox cmds. - Add embedded SLI_CONFIG support for BSG. - Add multibuffer support. - Implemented the setting up and tearing down Lancer FC device for performing internal and external loopback diagnostic tests. - Implemented the driver support for performing new link diagnostic tests Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Add resource extent supportJames Smart2011-05-26
| | | | | | | | | | This patch adds support for hardware that returns resource ids via extents rather than contiguous ranges. [jejb: checkpatch.pl fixes] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Add request-firmware supportJames Smart2011-05-26
| | | | | | | | | | Add request-firmware support: - Add support for request_firmware interface for INTF2 SLI4 ports. - Add ability to reset SLI4 INTF2 ports. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Add SR-IOV controlJames Smart2011-05-26
| | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Extended hardware support and support dump imagesJames Smart2011-05-26
| | | | | | | | | | | | Extended hardware support and support dump images: - Make the size to be MAILBOX_SYSFS_MAX (4096) so that it allows the maximum sysfs binary access interface possible. - Add ids and model names for new hardware - Add capability of inducing SLI4 firmware dump obj file Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Miscellaneous Fixes and CorrectionsJames Smart2011-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Miscellaneous Fixes and Corrections - Remove the memset in the lpfc_sli4_remove_rpi_hdrs call. - Correct swapping of SGE word 2 relative to offset value - Reorganize CQ and EQ usage to comply with SLI4 Specification. - Expand the driver to check the rn bit. Only detect an error if the error bit is set and the RN bit is NOT set. - If mailbox completion code is not success AND the mailbox status is success, then and only then will the driver overwrite the mailbox status. - When driver initializing device, if the device is on a PCIe bus, set PCI's "needs fundamental reset" bit so that EEH uses fundamental reset instead of hot reset for recovery. - Prevent driver from using new WWN when changed in firmware (until driver reload) - When HBA reports maximum SGE size > 0xffffffff (infinite), override with 0x80000000. - Fixed potential missed SLI4 device initialization failure conditions. - Added 100ms delay before driver action following IF_TYPE_2 function reset. - Reverted patch to UNREG/REG on PLOGI to mapped/unmapped node. - Add a check for the CVL received flag in the fcf inuse routine to avoid unregistering the fcf if Devloss fires before Delay discover timer fires. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-05-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
| * treewide: fix a few typos in commentsJustin P. Mattock2011-05-10
| | | | | | | | | | | | | | | | | | | | - kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * Merge branch 'master' into for-nextJiri Kosina2011-04-26
| |\ | | | | | | | | | | | | Fast-forwarded to current state of Linus' tree as there are patches to be applied for files that didn't exist on the old branch.
| * | treewide: remove extra semicolonsJustin P. Mattock2011-04-10
| | | | | | | | | | | | | | | Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | [SCSI] lpfc 8.3.23: Update driver version to 8.3.23James Smart2011-05-01
| | | | | | | | | | | | | | | | | | | | | | | | Update driver version to 8.3.22 Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.23: BSG additions and fixesJames Smart2011-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fixed the mixed declarations and codes which violate ISO C90 (declarations in subsections that assign at declaration) - Add BSG data transfer size protection in mailbox command pass-through path - Invoke BSG job_done while holding spinlock to fix deadlock - Added support for checking SLI_CONFIG subcommands - Fixed bug in BSG mailbox size check to non-embedded external buffer Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.23: Fixes related to new hardwareJames Smart2011-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes related to new hardware - Restrict driver to look at BAR2 or BAR4 only for if_type 0. - Allow SLI4 with FCOE_MODE not set for new SLI4 FC adapters. - Add Temporary RPI field to the ELS request WQE. - Do not override CT field in issue_els_flogi for SLI4 IF type 2 - For RQ_CREATE_V2 mbx cmd: fill in the rqe_size and page_size for RQ_CREATE. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.23: Miscellaneous fixesJames Smart2011-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Miscellaneous fixes - Do not limit RPI Count to a minimum of 64 - Fix FCFI incorrect on received unsolicited frames. - Save the FCFI returned in the REG_FCFI mailbox command if it was successful. - Fixed Vports not sending FDISC after lips. - Align based on the SLI4_PAGE_SIZE. - Fixed double byte swap on received RRQ. - Fixed mask size for the wq_id mask from 0x7F to 0x7FFF. - Clear FC_FABRIC flag when NPIV LOGO completes (and add a log message). - Modified driver to skip round robin only when ulpStatus==LOCAL_REJECT and word4=SEQUENCE_TIMEOUT to prevent FLOGI to disconnected FCF. - Don't add rport if driver unloading Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.23: Debugfs enhancementsJames Smart2011-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debugfs enhancements - Added iDiag support for new adapters. - Added queue entry access methods. - Fix host/port index in decimal - Added Doorbell register access methods. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] remove cmd->serial_number litterChristoph Hellwig2011-05-01
| |/ |/| | | | | | | | | | | Stop using cmd->serial_number in printks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | Fix common misspellingsLucas De Marchi2011-03-31
| | | | | | | | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* | [SCSI] lpfc 8.3.22: Update driver version to 8.3.22James Smart2011-03-23
| | | | | | | | | | | | | | | | Update driver version to 8.3.22 Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.22: Update Copyright DatesJames Smart2011-03-23
| | | | | | | | | | | | | | | | Update Copyright Dates Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.22: FC Discovery fixesJames Smart2011-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | FC Discovery fixes - In lpfc_sli4_bpl2sgl byte swapping the SGL in word2. - In lpfc_sli4_iocb2wqe byteswap the data for CMD_GEN_REQUEST64_CR type WQE. - In lpfc_sli4_seq_abort_acc do not set the oxid into the iocb's xritag field. - In lpfc_sli4_seq_abort_acc check the return value of lpfc_sli_issue_iocb. - Inprove messages in this area. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.22: Add support for PCI Adapter FailureJames Smart2011-03-23
| | | | | | | | | | | | | | | | | | | | Periodically poll adapter registers to detect pci adapter failure (reads return -1). On failure, take port offline, set error indicators and wake up worker threads. Threads will take adapter offline. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.22: T10-DIF correctionsJames Smart2011-03-23
| | | | | | | | | | | | | | | | | | | | T10-DIF corrections - Add selective reset jump table entry - Split T10-DIF BDEs that cross 4K boundary Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.22: Add new mailbox command and new BSG fixJames Smart2011-03-23
| | | | | | | | | | | | | | | | | | | | - Add new Queue Create Mailbox version support - Make lpfc_bsg_wake_mbox_wait routine check the mailboxes job reference before using it. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | Merge branch 'trivial' of ↵Linus Torvalds2011-03-20
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile
| * scsi: change to new flag variablematt mooney2011-03-17
| | | | | | | | | | | | | | | | Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* | [SCSI] lpfc: block target when port queueing limit is hitMike Christie2011-02-28
| | | | | | | | | | | | | | | | | | | | Instead of blocking the entire host when the port's queueing limit is hit, we should only block the port's target. This will allow IO to other ports to execute. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc: force retry in queuecommand when port is transitioningMike Christie2011-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the port takes a while to transition we could exhaust the retries when using DID_TRANSPORT_DISRUPTED. For this case we do not want to use any of the cmd's retries, because if the command was running then when it got failed the retry counter was already incremented. And if this is the first time we are seeing the command, (it got queued because it slipped through during the race) then it should not have its retries incremented. The fc class will decide the correct handling later. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.21: Change lpfc driver version to 8.3.21James Smart2011-02-18
| | | | | | | | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.21: Debugfs additionsJames Smart2011-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | - Add the driver debugfs framework for supporting debugfs read and write operations, and iDiag command structure. - Add read and write to SLI4 device PCI config space registers. - Add the driver support of debugfs PCI config space register bits set/clear methods to the provided bitmask. - Add iDiag driver support for SLI4 device queue diagnostic. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.21: Initialization and user interface changesJames Smart2011-02-18
| | | | | | | | | | | | | | | | | | | | | | | | - Make link speed not supported by port message an error message. - Add support for new SLI failure codes add sysfs parameter to reflect the security setting and current state. - Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory. [jejb: fix up compile failure] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.21: FC Discovery changesJames Smart2011-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | FC Discovery changes - Treat received PLOGI while logged in as a relogin (unregister and reregister). - Added a timer to delay Nport discovery when clean bit is cleared and Fabric portname/nodename/FCID is changed. - Invalidate Port's DID when receiving PLOGI from p2p port with CONFIG_PORT mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.21: RRQ Implementation fixesJames Smart2011-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RRQ Implementation fixes - Added checks to prevent a call to findnode_did in clr_active_rrq - Added the del_sync_timer call for the rrq_tmr to the stop_hba_timers routine. - Added a check in __lpfc_set_active_rrq for the driver unloading to prevent adding an rrq when the driver is being removed. - Add code to scsi_iocb_cmpl to check for the remote stop and add the rrq. - Added the same check to els retry. - Added code to compare the source did in the els rrq to the vports did and chose the right exchange ID. - Initialize the start_cmd pointer to indicate when we have looped through all of the scsi buffers. - Remove the need for the lock around the clearing of the active bit in the rrq. - Added code to clean the els and fcp xri aborted list and remove the all of the RRQs for a deleted vport. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.21: Critical Errors and Bug FixesJames Smart2011-02-18
|/ | | | | | | | | | | | | | | | | | | Critical Errors: - Correctly handle non-zero return lpfc_workq_post_event and return ENOMEM - Save the irq level when locking the host_lock in lpfc_findnode_did Bug Fixes: - Adjust payload_length and request_length for sli4_config mailbox commands. - Add the freed sgl/XRI to the tail of the list rather than to the head. - Set the FC_VPORT_NEEDS_INIT_VPI on vport deletes and check it before issuing a fdisc on an els retry. - Only call lpfc_hba_init_link() if phba->cfg_suppress_link_up is LPFC_INITIALIZE_LINK. - Add support for SLI-4 Performance Hints Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Merge branch 'for-next' of ↵Linus Torvalds2011-01-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
| * drivers: fix comment typo diable -> disable.Justin P. Mattock2011-01-03
| | | | | | | | | | | | | | | | The below patch fixes a typo "diable" to "disable" and also fixes another typo in a comment. Please let me know if this is correct or not. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * Merge branch 'master' into for-nextJiri Kosina2010-12-22
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
| * | tree-wide: fix comment/printk typosUwe Kleine-König2010-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | [SCSI] lpfc: lower stack use in lpfc_fc_frame_checkTomas Henzl2011-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | according to checkstack the lpfc_fc_frame_check occupies the first place in stack usage: make checkstack objdump -d vmlinux $(find . -name '*.ko') | \ perl /root/rpmbuild/BUILD/kernel-2.6.32/linux-2.6.32.x86_64/scripts/checkstack.pl x86_64 0x000013f4 lpfc_fc_frame_check [lpfc]: 1936 ... This change makes the rctl_names static, thus not on stack. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.20: Update lpfc driver version to 8.3.20James Smart2010-12-21
| | | | | | | | | | | | | | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.20: Updates to FC discovery commandsJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | Updated commands used for ELS to utilize VPI Allocate RPI at node creation time and pass in ELS commnads. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.20: Implement new SLI4 init procedures based on if_typeJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement new SLI4 init procedures based on if_type: - Add structure changes for new SLIPORT registers and BAR changes. - Update register names to be consistent with inteface spec terms. - Added union to encapsulate Hardward error registers. - Rework lpfc_sli4_post_status_check() around SLI-4's SLI_INTF type - Removed the lpfc_sli4_fw_cfg_check routine - Segmented driver logic to include evaluation of the if_type to engage different behaviors. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.20: Implement the FC and SLI async event handlersJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement the FC and SLI async event handlers: - Updated MQ_CREATE_EXT mailbox structure to include fc and SLI async events. - Added the SLI trailer code. - Split physical field into type and number to reflect latest SLI spec. - Changed lpfc_acqe_fcoe to lpfc_acqe_fip to reflect latest Spec changes. - Added lpfc_acqe_fc_la structure for FC link attention async events. - Added lpfc_acqe_sli structure for sli async events. - Added lpfc_sli4_async_fc_evt routine to handle fc la async events. - Added lpfc_sli4_async_sli routine to handle sli async events. - Moved LPFC_TRAILER_CODE_FC to be handled by its own handler function. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.20: Critical fixesJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Use for iocbq->context1 to hold the ndlp pointer. - Set ndlp in all iocbs generated from ioctl functions. - Turn parity and serr bits back on after performing sli4 board reset. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.19: Update lpfc driver version to 8.3.19James Smart2010-12-21
| | | | | | | | | | | | | | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.19: Change heartbeat to default to disabledJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.19: Added support for ELS RRQ commandJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added support for ELS RRQ command - Add new routine lpfc_set_rrq_active() to track XRI qualifier state. - Add new module parameter lpfc_enable_rrq to control RRQ operation. - Add logic to ELS RRQ completion handler and xri qualifier timeout to clear XRI qualifier state. - Use OX_ID from XRI_ABORTED_CQE for RRQ payload. - Tie abort and XRI_ABORTED_CQE andler to RRQ generation. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.19: Add SLI4 FC Discovery supportJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SLI4 FC Discovery support - Replace READ_LA and READ_LA64 with READ_TOPOLOGY mailbox command. - Converted the old READ_LA structure to use bf_set/get instead of bit fields. - Rename HBA_FCOE_SUPPORT flag to HBA_FCOE_MODE. Flag now indicates function is running as SLI-4 FC or FCoE port. Make sure flag reset each time READ_REV completed as it can dynamically change. - Removed BDE union in the READ_TOPOLOGY mailbox command and added a define to define the ALPA MAP SIZE. Added FC Code for async events. - Added code to support new 16G link speed. - Define new set of values to keep track of valid user settable link speeds. - Used new link speed definitions to define link speed max and bitmap. - Redefined FDMI Port sppeds to be hax values and added the 16G value. - Added new CQE trailer code for FC Events. - Add lpfc_issue_init_vfi and lpfc_init_vfi_cmpl routines. - Replace many calls to the initial_flogi routine with lpfc_issue_init_vfi. - Add vp and vpi fields to the INIT_VFI mailbox command. - Addapt lpfc_hba_init_link routine for SLI4 use. - Use lpfc_hba_init_link call from lpfc_sli4_hba_setup. - Add a check for FC mode to register the FCFI before init link. - Convert lpfc_sli4_init_vpi to be called without a vpi (get it from vport). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.19: Add latest SLI4 Hardware initialization supportJames Smart2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add the Lancer FC and FCoE PCI IDs - Add new SLI4 INTF register definitions - Implement new SLI4 doorbell register Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | [SCSI] lpfc 8.3.19: Fix critical errors and crashesJames Smart2010-12-21
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix critical errors and crashes - Replace LOF_SECURITY with LOG_SECURITY - When calculating diag test memory size, use full size with header. - Return LS_RJT with status=UNSUPPORTED on unrecognized ELS's - Correct NULL pointer dereference when lpfc_create_vport_work_array() returns NULL. - Added code to handle CVL when port is in LPFC_VPORT_FAILED state. - In lpfc_do_scr_ns_plogi, check the nodelist for FDMI_DID and reuse the resource. - Check for generic request 64 and calculate the sgl offset for the request and reply sgls, also calculate the xmit length using only the request bde. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | SCSI host lock push-downJeff Garzik2010-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 01:11:31 -0500