aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_scsi.c
Commit message (Collapse)AuthorAge
* [SCSI] lpfc 8.3.24: Add resource extent supportJames Smart2011-05-26
| | | | | | | | | | This patch adds support for hardware that returns resource ids via extents rather than contiguous ranges. [jejb: checkpatch.pl fixes] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Miscellaneous Fixes and CorrectionsJames Smart2011-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Miscellaneous Fixes and Corrections - Remove the memset in the lpfc_sli4_remove_rpi_hdrs call. - Correct swapping of SGE word 2 relative to offset value - Reorganize CQ and EQ usage to comply with SLI4 Specification. - Expand the driver to check the rn bit. Only detect an error if the error bit is set and the RN bit is NOT set. - If mailbox completion code is not success AND the mailbox status is success, then and only then will the driver overwrite the mailbox status. - When driver initializing device, if the device is on a PCIe bus, set PCI's "needs fundamental reset" bit so that EEH uses fundamental reset instead of hot reset for recovery. - Prevent driver from using new WWN when changed in firmware (until driver reload) - When HBA reports maximum SGE size > 0xffffffff (infinite), override with 0x80000000. - Fixed potential missed SLI4 device initialization failure conditions. - Added 100ms delay before driver action following IF_TYPE_2 function reset. - Reverted patch to UNREG/REG on PLOGI to mapped/unmapped node. - Add a check for the CVL received flag in the fcf inuse routine to avoid unregistering the fcf if Devloss fires before Delay discover timer fires. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] remove cmd->serial_number litterChristoph Hellwig2011-05-01
| | | | | | | Stop using cmd->serial_number in printks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Fix common misspellingsLucas De Marchi2011-03-31
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* [SCSI] lpfc 8.3.22: Update Copyright DatesJames Smart2011-03-23
| | | | | | | | Update Copyright Dates Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.22: T10-DIF correctionsJames Smart2011-03-23
| | | | | | | | | | T10-DIF corrections - Add selective reset jump table entry - Split T10-DIF BDEs that cross 4K boundary Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc: block target when port queueing limit is hitMike Christie2011-02-28
| | | | | | | | | | Instead of blocking the entire host when the port's queueing limit is hit, we should only block the port's target. This will allow IO to other ports to execute. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc: force retry in queuecommand when port is transitioningMike Christie2011-02-28
| | | | | | | | | | | | | | | | If the port takes a while to transition we could exhaust the retries when using DID_TRANSPORT_DISRUPTED. For this case we do not want to use any of the cmd's retries, because if the command was running then when it got failed the retry counter was already incremented. And if this is the first time we are seeing the command, (it got queued because it slipped through during the race) then it should not have its retries incremented. The fc class will decide the correct handling later. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.21: Initialization and user interface changesJames Smart2011-02-18
| | | | | | | | | | | | - Make link speed not supported by port message an error message. - Add support for new SLI failure codes add sysfs parameter to reflect the security setting and current state. - Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory. [jejb: fix up compile failure] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.21: RRQ Implementation fixesJames Smart2011-02-18
| | | | | | | | | | | | | | | | | | | | | | | RRQ Implementation fixes - Added checks to prevent a call to findnode_did in clr_active_rrq - Added the del_sync_timer call for the rrq_tmr to the stop_hba_timers routine. - Added a check in __lpfc_set_active_rrq for the driver unloading to prevent adding an rrq when the driver is being removed. - Add code to scsi_iocb_cmpl to check for the remote stop and add the rrq. - Added the same check to els retry. - Added code to compare the source did in the els rrq to the vports did and chose the right exchange ID. - Initialize the start_cmd pointer to indicate when we have looped through all of the scsi buffers. - Remove the need for the lock around the clearing of the active bit in the rrq. - Added code to clean the els and fcp xri aborted list and remove the all of the RRQs for a deleted vport. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.21: Critical Errors and Bug FixesJames Smart2011-02-18
| | | | | | | | | | | | | | | | | | | Critical Errors: - Correctly handle non-zero return lpfc_workq_post_event and return ENOMEM - Save the irq level when locking the host_lock in lpfc_findnode_did Bug Fixes: - Adjust payload_length and request_length for sli4_config mailbox commands. - Add the freed sgl/XRI to the tail of the list rather than to the head. - Set the FC_VPORT_NEEDS_INIT_VPI on vport deletes and check it before issuing a fdisc on an els retry. - Only call lpfc_hba_init_link() if phba->cfg_suppress_link_up is LPFC_INITIALIZE_LINK. - Add support for SLI-4 Performance Hints Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.19: Added support for ELS RRQ commandJames Smart2010-12-21
| | | | | | | | | | | | | | | Added support for ELS RRQ command - Add new routine lpfc_set_rrq_active() to track XRI qualifier state. - Add new module parameter lpfc_enable_rrq to control RRQ operation. - Add logic to ELS RRQ completion handler and xri qualifier timeout to clear XRI qualifier state. - Use OX_ID from XRI_ABORTED_CQE for RRQ payload. - Tie abort and XRI_ABORTED_CQE andler to RRQ generation. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* SCSI host lock push-downJeff Garzik2010-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] lpfc 8.3.18: Fix critical errorsJames Smart2010-10-26
| | | | | | | | | | | | | | Fix critical errors - Update send_scsi_event to validate pnode pointer active before copying the wwpn information. - Add a message, mailbox_idle, and unlock before failing SECURITY_MGMT or AUTH_PORT mailbox commands - Prevent spin_lock_irqsave from being called twice in a row. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.17: SCSI fixesJames Smart2010-10-07
| | | | | | | | | | - Fail I/Os with incomplete data that complete with SCSI Check condition. - Complete aborted I/Os with host_scribble equal to NULL with success. - Initialize context1 field of iocbq in the new_scsi_buf routines. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc: do not reset dev_loss_tmo in slave calloutMike Christie2010-09-05
| | | | | | | | | This fixes a bug where the driver was resetting the rport dev_loss_tmo when devices were added by adding support for the get_host_def_dev_loss_tmo callout. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanupJames Smart2010-08-06
| | | | | | | | | | | | | | | | - Remove unneeded Endian swap for Block Guard IOCB response - Add a check for mailbox active before issuing the heartbeat command - Correct heartbeat last_completion updates to avoid unneeded heartbeats - Add Security crypto support to CONFIG_PORT mailbox command - Add fips level and fips spec revision sysfs parameters - Remove duplicate setting of ext_byte_len fields in lpfc_bsg_issue_mbox - Switch call to memcpy_toio to __write32_copy to prevent unaligned 64 bit copy - Change log message 0318 from an error to a warning as it is not an error - Patch an incorrect call to lpfc_drain_txq on SLI-3 functions Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.15: Add target queue depth throttlingJames Smart2010-07-28
| | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.15: BSG, Discovery, and Misc fixesJames Smart2010-07-28
| | | | | | | | | | | | | | | | | | | | | - BSG interface related: - Fix node reference count if node is active - Warn if we're overwriting an active CT context - Discovery related: - Clear "Ignore Reg Login" flag when purging mailbox queue - Pay attention to return code for fc_block_scsi_eh() - Stall device loss code if we're almost done when it fires (we're logged in, but PRLI is outstanding) - Bugs - Correct DIF code for endianness issues - Correct where we had missed points to check txq on i/o completion/cleanup Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.14: SCSI and SLI API fixesJames Smart2010-07-27
| | | | | | | | | | | | | | - Fixed accounting of allocated SCSI buffers when post sgl fails. - Restrict scsi buffer allocation based on LUN count (sdev_cnt). - Create __lpfc_sli_free_rpi that doesn't take out the hbalock. - Modify lpfc_sli_free_rpi to call __lpfc_sli_free_rpi. - Call __lpfc_sli_free_rpi in lpfc_cleanup_pending_mbox. - Do not swap the strings returned in mailbox commands and do not swap byte aligned data in VPD. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.14: PCI fixes and enhancementsJames Smart2010-07-27
| | | | | | | | | | | | - Allow enabling MSI-X intterupts with fewer vectors than requested by looking at the return value from pci_enable_msix. - Implemented driver PCI AER error handling routines for supporting AER error recovering on SLI4 devices. - Remove redundant SLI_ACTIVE checks Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.13: Add TX Queue Support for SLI4 ELS commands.James Smart2010-07-27
| | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.13: SCSI specific changesJames Smart2010-07-27
| | | | | | | | | | - Fix hba_queue_depth to reflect actual available XRIs - Add support for new SLER specific firmware status codes. - Free SCSI buffer when iotag allocation fails. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.12: T10-PI/DIF changesJames Smart2010-04-11
| | | | | | | | | | | Update driver for change in T10-PI interface on adapter - Remove Profiles. - Add new SLI Opcodes. - Add new PDE structures used for BlockGuard. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2010-03-18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...
| * [SCSI] lpfc 8.3.10: Update SLI interface areasJames Smart2010-03-03
| | | | | | | | | | | | | | | | | | | | - Clear LPFC_DRIVER_ABORTED on FCP command completion. - Clear exchange busy flag when I/O is aborted and found on aborted list. - Free sglq when XRI_ABORTED event is processed before release of IOCB. - Only process iocb as aborted when LPFC_DRIVER_ABORTED is set. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] lpfc 8.3.10: Fix user interface issuesJames Smart2010-03-03
| | | | | | | | | | | | | | | | | | - Add Logging message for critial errors. - Remove unused variable from lpfc_nodev_tmo_show - Update supress_link_up parameter with #define values. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | Merge branch 'for-next' into for-linusJiri Kosina2010-03-08
|\ \ | |/ |/| | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| * Fix misspelling of "should" and "shouldn't" in comments.Adam Buchbinder2010-02-05
| | | | | | | | | | | | | | Some comments misspell "should" or "shouldn't"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | [SCSI] lpfc 8.3.9: Changes to sysfs interface for the lpfc driver.James Smart2010-02-17
| | | | | | | | | | | | | | | | | | | | - Convert all sysfs parameters to uint instead of int. - Add lpfc_supress_link_up parameter. - Change link_state to writable sysfs parameter. - Add support to be able to "up" or "down" link from link_state parameter. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.9: SLI enhancments to support new hardware.James Smart2010-02-17
| | | | | | | | | | | | | | | | | | | | | | - Add support for the INTF (Interface) PCI register. - Add support for greater than 2 page SGLs. - Add support for up to 32 bit BDE lengths. - Implement the Port Capabilities Mailbox command. - Stop checking the Minor Code in the EQE structure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.8: Add code to display logical link speedJames Smart2010-02-08
| | | | | | | | | | | | | | Display Logical Link Speed when supported and is non-zero. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] lpfc 8.3.8: BugFixes: SLI relates changesJames Smart2010-02-08
|/ | | | | | | | | | | | | | Fix hardware/SLI relates issues: - Handle XB bit so that ELS XRIs are not prematurely released. - Handle XB bit so that FCP XRIs are not prematurely released. - Define new security SLI Commands. - Remove unused security SLI commands - Skip receive data size parameter check on received FLOGI. - Added LPFC_USE_FCPWQIDX flag to iocb to force SLI layer to submit abort WQE on same WQ as the command WQE. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.6 : Fix critical errorsJames Smart2009-12-04
| | | | | | | | | | | | | Fix errors relating to crashes and hangs. - Fix crash due to list corruption while unloading driver. - Fix panic during pci-hot-plug testing. - Fix panic when unmapping luns. - Fixed total_scsi_bufs counting could cause exhausted memory. - Fixed locking issue causing hang. - Fixed the call from lpfc_new_scsi_buf_s3 to use lpfc_release_scsi_buf_s3. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.6 : FC Protocol FixesJames Smart2009-12-04
| | | | | | | | | | | | | | | | | | | | FC protocol fixes. - Fix send sequence logic to handle multi SGL IOCBs. - Fix FDISC completion always setting VPORT state to failed. - Ported the fix on reporting of max_vpi to uppper layer. - Fix incorrect number of Vports allowed to be created. - Fixed Dead FCoE port after creating vports. - Added handling of ELS request for Reinstate Recovery Qualifier (RRQ) - Handle unsolicited CT exchange initiator receiving CT exchange ABTS - Migrate LUN queue depth ramp up code to scsi mid-layer. - Made ABTS WQE go to the same WQ as the WQE to be aborted. - Fix Vport does not rediscover after FCF goes away. - Fixed lpfc_unreg_vfi failure after devloss timeout. - Fixed RPI bit leak. - Fix hbq pointer corruption during target discovery. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.5: fix fcp command polling, add FIP mode, performance ↵James Smart2009-12-04
| | | | | | | | | | | | | | optimisations and devloss timout fixes This patch includes the following changes: - Fixed Panic/Hang when using polling mode for fcp commands - Added support for Read_rev mbox bits indicating FIP mode of HBA - Optimize performance of slow-path handling of els responses - Add code to cleanup orphaned unsolicited receive sequences - Fixed Devloss timeout when multiple initiators are in same zone Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.5: fix sysfs parameters, vport creation and other bugs and ↵James Smart2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | update logging This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi_transport_fc: Introduce helper function for blocking scsi_ehChristof Schmitt2009-12-04
| | | | | | | | | | Move the duplicated code from FC LLDs to SCSI FC transport class. Acked-by: James Smart <james.smart@emulex.com> Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Acked-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] Deprecate SCSI_PROT_*_CONVERT operationsMartin K. Petersen2009-10-02
| | | | | | | | | | | | | | The checksum format is orthogonal to whether the protection information is being passed on beyond the HBA or not. It is perfectly valid to use a non-T10 CRC with WRITE_STRIP and READ_INSERT. Consequently it no longer makes sense to explicitly refer to the conversion in the protection operation. Update sd_dif and lpfc accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Ihab Hamadi <Ihab.Hamadi@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.4: Remove spaces before newlines in several log messagesJames Smart2009-08-22
| | | | | | | | Remove spaces before newlines in several log messages Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.4: Add bsg (SGIOv4) support for ELS/CT supportJames Smart2009-08-22
| | | | | | | | | | Add bsg (SGIOv4) support for sending and receiving ELS, CT commands This patch adds a new file, lpfc_bsg.c. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2009-06-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic79xx: make driver respect nvram for IU and QAS settings [SCSI] don't attach ULD to Dell Universal Xport [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3 [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences [SCSI] qla2xxx: Resolve a performance issue in interrupt [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set. [SCSI] nsp_cs: time_out reaches -1 [SCSI] qla2xxx: fix printk format warnings [SCSI] ncr53c8xx: div reaches -1 [SCSI] compat: don't perform unneeded copy in sg_io code [SCSI] zfcp: Update FC pass-through support [SCSI] zfcp: Add FC pass-through support [SCSI] FC Pass Thru support
| * [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypointJames Smart2009-06-15
| | | | | | | | | | | | | | | | | | | | | | | | Patch was originally submitted upstream on 4/21/2008: http://marc.info/?l=linux-scsi&m=120880973719266&w=2 Somewhere, it never get merged. The patch restructures the task mgmt routines, commonizing like behavior. Then the patch changes device reset to LUN resets, and adds a target reset handler. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differencesJames Smart2009-06-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains the following changes - Set the CT field of FDISC to 3 - Fixed over allocation of SCSI buffers on SLI4 - Removed unused jump table entries - Increase LPFC_WQE_DEF_COUNT to 256 - Updated FDISC context to VPI - Fixed immediate SCSI command for LUN reset translation to WQE - Extended mailbox handling to allow MBX_POLL commands in between async MBQ commands - Fixed SID used for FDISC - Fix crash when accessing ctlregs from sysfs for SLI4 HBAs - Fix SLI4 firmware version not being saved or displayed correctly - Expand CQID field in WQE structure to 16 bits - Fix post header template mailbox command timing out - Removed FCoE PCI device ID 0x0705 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-06-14
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
| * trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in ↵Martin Olsson2009-06-12
| | | | | | | | | | | | | | documentation and source comments. Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | [SCSI] Merge branch 'linus'James Bottomley2009-06-12
|\| | | | | | | | | | | | | | | | | Conflicts: drivers/message/fusion/mptsas.c fixed up conflict between req->data_len accessors and mptsas driver updates. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * Merge branch 'master' into for-2.6.31Jens Axboe2009-05-22
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/block/hd.c drivers/block/mg_disk.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | block: convert to pos and nr_sectors accessorsTejun Heo2009-05-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-17 16:18:46 -0500