aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rtc/Kconfig
Commit message (Collapse)AuthorAge
* ARM: NUC900: add RTC driver support for nuc910 and nuc920Wan ZongShun2009-12-16
| | | | | | | | | | | Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Hu Ruihuan <specter118@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "jack wang" <jack_wang@usish.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add driver for BQ32000 I2C RTCPiotr Ziecik2009-12-16
| | | | | | | | | | | This patch adds basic support for Texas Instruments BQ32000 I2C RTC. Only time reading/writing is implemented. Advanced features, such as trickle charger and crystal calibration are not supported. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: make rtc-omap driver ioremap its register spaceMark A. Greer2009-12-16
| | | | | | | | | | | | | | | | | | The rtc-omap driver currently assumes that the rtc's registers are at a fixed address and already mapped into virtual memory space. Remove those assumptions so the same driver can be used for similar devices that reside at different physical addresses (e.g., TI's DA8xx/OMAP-L13x SoC's). Also allow the possibility for the timer and alarm interrupts to use the same IRQ. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add Freescale MC13783 RTC driverUwe Kleine-König2009-12-16
| | | | | | | | | | | | | | This driver provides support for the RTC part integrated into the Freescale MC13783 PMIC and bases on patch created earlier by Sascha Hauer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: Add twl6030 RTC supportBalaji T K2009-12-13
| | | | | | | | | | | | This patch adds support for RTC in phoenix TWL6030. Register offset addresses have changed in TWL6030 rtc-twl.c will hence forth support all twl RTC (4030, 5030, 6030 ..) Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-12-08
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: parport_mfc3 - Not makes it a bool before the comparison. m68k: don't export static inline functions fbdev: atafb - add palette register check m68k: Remove the BKL from sys_execve m68k: Cleanup linker scripts using new linker script macros. m68k: Make thread_info.h usable from assembly. m68knommu: define arch_has_single_step() and friends m68k: ptrace fixes m68k: use generic code for ptrace requests rtc: Add an RTC driver for the Ricoh RP5C01 rtc: Add an RTC driver for the Oki MSM6242
| * rtc: Add an RTC driver for the Ricoh RP5C01Geert Uytterhoeven2009-12-04
| | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
| * rtc: Add an RTC driver for the Oki MSM6242Geert Uytterhoeven2009-12-04
| | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
* | RTC: let Dove soc select the rtc-mv driver.Saeed Bishara2009-11-27
|/ | | | | Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* rtc: driver for PCAP2 PMICDaniel Ribeiro2009-09-23
| | | | | | | | | | | [ospite@studenti.unina.it: get pcap data from the parent device] Signed-off-by: guiming zhuo <gmzhuo@gmail.com> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add Freescale stmp37xx/378x driverdmitry pervushin2009-09-23
| | | | | | | | | Add support for RTC on the Freescale STMP37xx/378x platform. Signed-off-by: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: U300 COH 901 331 RTC driver v3Linus Walleij2009-09-23
| | | | | | | | | | | | This adds a driver for the RTC COH 901 331 found in the ST-Ericsson U300 series mobile platforms to the RTC subsystem. It integrates to the ARM kernel support recently added to RMKs ARM tree and will be enabled in the U300 defconfig in due time. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add driver for MXC's internal RTC moduleDaniel Mack2009-09-23
| | | | | | | | | | | | | | | | | | | | This adds a driver for Freescale's MXC internal real time clock modules. The code is taken from Freescale's BSPs, but modified to fit the current kernel coding mechanisms. Also, the PMIC external clock function was removed for now to not add dead bits and keep the code as simple as possible. [akpm@linux-foundation.org: make PIE_BIT_DEF[] static] Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: Philips PCF2123 RTC SPI driverChris Verges2009-09-23
| | | | | | | | | | | | | Add support for the Philips/NXP PCF2123 RTC. Signed-off: Chris Verges <chrisv@cyberswitching.com> Tested-by: Chris Verges <chrisv@cyberswitching.com> Signed-off: Christian Pellegrin <chripell@fsfe.org> Tested-by: Christian Pellegrin <chripell@fsfe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: AB3100 RTC supportLinus Walleij2009-09-17
| | | | | | | | | | This adds support for the RTC found inside the AB3100 Mixed Signal chip. The symbols used for communicating with the chip is found in the mfd/ab3100-core.c driver that also provides the platform device. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* rtc: Add support for RTCs on Wolfson WM831x devicesMark Brown2009-09-17
| | | | | | | | | | | | | | | | | | | | | | The WM831x series of PMICs contain RTC functionality. The hardware provides a 32 bit counter incrementing at 1Hz together with a per tick interrupt and an alarm value. For simplicity the driver chooses to define the epoch for the counter as the Unix epoch - if required platform data can be used in future to customise this. When powered on from a completely cold state the RTC reports that it has not been configured - when this happens an error is returned when attempting to read the RTC in order to avoid use of values we know to be invalid. The hardware also provides security features which mean that it can ignore attempts to set the RTC time in certain circumstances, most notably if the RTC is written to too often. These errors are detected by verifying the written RTC value. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* rtc: add stand-alone driver for RX8025 chipWolfgang Grandegger2009-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Epson RX-8025SA/NB RTC chips. It includes support for alarms, periodic interrupts (1 Hz) and clock precision adjustment. For clock precision adjustment, the SYSFS file "clock_adjust_ppb" gets created in "/sys/class/rtc/rtcX/device". It permits to set and get the clock adjustment in ppb (parts per billion), e.g.: # echo -183000 > /sys/class/rtc/rtc0/device/clock_adjust_ppb # cat /sys/class/rtc/rtc0/device/clock_adjust_ppb -183000 This allows to compensate temperature dependent clock drifts. According to the RX8025 SA/NB application manual the frequency and temperature characteristics can be approximated using the following equation: df = a * (ut - t)**2 df: Frequency deviation in any temperature a : Coefficient = (-35 +-5) * 10**-9 ut: Ultimate temperature in degree = +25 +-5 degree t : Any temperature in degree Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sh: rtc-generic support.Paul Mundt2009-04-27
| | | | | | This adds rtc-generic support for SUPERH32. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* rtc: rtc-sh: clock framework support.Paul Mundt2009-04-16
| | | | | | | | This adds clock framework support to the rtc-sh driver. With this in place, platforms can default to leaving the clock disabled rather than placing it in the always enabled state. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/rtc-pariscLinus Torvalds2009-04-03
|\ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/kyle/rtc-parisc: powerpc/ps3: Add rtc-ps3 powerpc: Hook up rtc-generic, and kill rtc-ppc m68k: Hook up rtc-generic parisc: rtc: Rename rtc-parisc to rtc-generic parisc: rtc: Add missing module alias parisc: rtc: platform_driver_probe() fixups parisc: rtc: get_rtc_time() returns unsigned int
| * powerpc/ps3: Add rtc-ps3Geert Uytterhoeven2009-04-01
| | | | | | | | | | | | | | | | | | | | Create a real RTC driver for PS3, and unhook the deprecated ppc_md.[gs]et_rtc_time. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
| * powerpc: Hook up rtc-generic, and kill rtc-ppcGeert Uytterhoeven2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PowerPC has been a long time user of the generic RTC abstraction, so hook up rtc-generic: - Create the "rtc-generic" platform device if ppc_md.get_rtc_time is set, - Kill rtc-ppc, as rtc-generic offers the same functionality in a more generic way, and supports autoloading through udev. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
| * m68k: Hook up rtc-genericGeert Uytterhoeven2009-04-01
| | | | | | | | | | | | | | | | | | | | | | | | m68k has been a long time user of the generic RTC abstraction, so hook up rtc-generic: - Create the "rtc-generic" platform device if mach_hwclk is set, - Add checks for mach_hwclk, in anticipation of RTC chip drivers being moved to drivers/rtc/. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
| * parisc: rtc: Rename rtc-parisc to rtc-genericGeert Uytterhoeven2009-04-01
| | | | | | | | | | | | | | | | | | | | The rtc-parisc driver is not PA-RISC specific at all, as it uses the existing (but deprecated) generic RTC infrastructure ([gs]et_rtc_time()). Rename the driver from rtc-parisc to rtc-generic. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
* | rtc: add m41t62 support to rtc-m41t80 driverDaniel Glockner2009-04-02
|/ | | | | | | | | | | | Compared to the other supported chips, the m41t62 uses a different register to set the square wave frequency. Signed-off-by: Daniel Glockner <dg@emlix.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add EPSON RX8025 support to DS1307 RTC driverMatthias Fuchs2009-04-01
| | | | | | | | | | | Add support for the EPSON RX8025 RTC. The date/time registers of this chip are compatible with the DS1307. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add platform driver for EFIdann frazier2009-04-01
| | | | | | | | | | | | | Munge Stephane Eranian's efirtc.c code into an rtc platform driver [akpm@linux-foundation.org: use is_leap_year()] Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: rtc-dm355evm driverDavid Brownell2009-02-05
| | | | | | | | | | | | Simple RTC driver for the MSP430 firmware on the DM355 EVM board. Other than not supporting atomic reads/writes of all four bytes, this is reasonable as a basic no-alarm RTC. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: PCF50633 rtc driverBalaji Rao2009-01-10
| | | | | | | | | Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <a.zummo@towertech.it> Cc: rtc-linux@googlegroups.com Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* rtc: driver for Marvell's SoCs 88F6281 and 88F6192Saeed Bishara2009-01-06
| | | | | | | | | | | | | | Driver for the on-chip RTC found in some of Marvell's SoCs such as the Kirkwood 88F6281 and 88F6192 devices. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add rtc-tx4939 driverAtsushi Nemoto2009-01-06
| | | | | | | | | | Add support for RTC in TX4939 SoC. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: Au1000 On-Chip Counter0-as-RTC driver.Manuel Lauss2009-01-06
| | | | | | | | | | | | Simple driver which uses the Au1xxx Time-Of-Year counter (counter0) as a 1Hz RTC. [akpm@linux-foundation.org: repair Kconfig] Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: kconfig cleanupAlessandro Zummo2009-01-06
| | | | | | | | | | Remove double spaces and adds some suggestions. It also fixes the descriptions of options that are no more available as modules. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: rtc-ds1390 probe sequence and misc fixesAlessandro Zummo2009-01-06
| | | | | | | | | | | | | | | | Small fixes for the ds1390 driver - fixed initialization of the spi device - added missing includes - removed printks - removed useless wrappers for rtc ops - removed dead code Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Jackson <mpfj@mimc.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: driver for pxa27x and pxa3xx SoCRobert Jarzmik2009-01-06
| | | | | | | | | | | | | | | | | | | With PXA27x and above, a new RTC hardware block was added in addition to the legacy one which is also found on the SA1100 SOC family. This second RTC block is called "wristwatch" and "periodic interrupt" and works independently from the other RTC block. The driver offers provides : - a 1Hz ticking clock - a periodic alarm, in the 1Hz to 1000Hz range - a one shot alarm Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add alarm/update irq interfacesAlessandro Zummo2009-01-04
| | | | | | | | | | | | | | | | Add standard interfaces for alarm/update irqs enabling. Drivers are no more required to implement equivalent ioctl code as rtc-dev will provide it. UIE emulation should now be handled correctly and will work even for those RTC drivers who cannot be configured to do both UIE and AIE. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add Dallas DS1390/93/94 RTC chipsMark Jackson2008-11-12
| | | | | | | | | | Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: basic implementation of Epson RX-8581 I2C Real Time ClockMartyn Welch2008-11-12
| | | | | | | | | | | | | Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: rtc-wm8350: add support for WM8350 RTCMark Brown2008-11-12
| | | | | | | | | | | | | | | | | This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Liam Girdwood <linux@wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2008-10-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: asm/gpio.h needs linux/kernel.h for might_sleep()/WARN_ON(). sh: mach-highlander: Handle SCIF pinmuxing on R7785RP. sh: sh7785 pinmux support sh: update defconfigs. sh: Kill off unused p1fc divisors from SH7763 clk fwk. sh: improve pinmux support for single direction pins sh: use 10MHz VIO_CLK for ov772x on Migo-R sh: Update gpio_set_value() pin value handling sh: update ov772x byte order on Migo-R rtc: Add R2025S/D comment to rs5c372 Kconfig entry. sh: Export cache flush routines needed by sh_eth on SH7619. sh: Wire up oops reporting in the die notifier chain. sh: ap325rxa: Kill off unused port definitions. sh: Hook up PB0->PB7 input-only pins in SH7203 PFC. sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization. sh: add support FLCTL for ap325rxa board sh: gpio: Stub in dummy GPIO<->IRQ mapping routines. sh: rsk7203: leds-gpio support for RSK+ LEDs. sh: gpio: Include asm-generic/gpio.h for non-gpiolib stubs. sh: fix soc-camera compile breakage on Migo-R. ...
| * rtc: Add R2025S/D comment to rs5c372 Kconfig entry.Paul Mundt2008-10-21
| | | | | | | | | | | | | | This was accidentally left out when the R2025S/D support was merged earlier. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | mfd: rtc-twl4030 driverDavid Brownell2008-10-21
|/ | | | | | | | | | | | | | | | This adds a driver for the RTC inside the TWL4030 multi-function device. It's a fairly basic RTC, with a wake-capable alarm. Note that many of the pre-release Overo boards now in circulation can't effectively use this RTC, because of a wiring error that puts its TWL chip into "secure" mode. (As in "secure yourself against tampering".) This isn't an issue on other OMAP3 boards now supported in mainline, such as Beagle and Labrador. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds2008-10-20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: convert to generic compat_sys_ptrace parisc: add rtc platform driver parisc: initialize unwinder much earlier parisc: add new syscalls parisc: hijack jump to start_kernel parisc: add pdc_coproc_cfg_unlocked and set_firmware_width_unlocked parisc: move include/asm-parisc to arch/parisc/include/asm parisc: move pdc_result to real2.S parisc: unify CCIO_COLLECT_STATS implementation parisc: add arch/parisc/kernel/.gitignore parisc: ropes.h - fix <asm-parisc/*> -> <asm/*> parisc: parisc-agp - fix <asm-parisc/*> -> <asm/*> Resolve remove/rename conflict: include/asm-parisc/a.out.h is no longer relevant.
| * parisc: add rtc platform driverKyle McMartin2008-10-10
| | | | | | | | Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
* | rtc: rtc-m41t80.c: add support for the ST M41T65 RTCSteven A. Falco2008-10-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for M41T65 Real Time Clock chip. The main differences I see between the M41T65 and M41T80 are that: 1) The M41T65 watchdog timer has three bits controlling resolution (versus two for the M41T80). 2) There is no register 0x13 for controlling square-wave output. Signed-off-by: Steven A. Falco <sfalco@harris.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | rtc: use CONFIG_PPC instead of CONFIG_PPC_MERGEKumar Gala2008-10-16
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all powerpc platforms and we want to get rid of it use CONFIG_PPC instead. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | rtc: add device driver for Dallas DS3234 SPI RTC chipDennis Aberilla2008-10-16
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the Dallas DS3234 chip - extremely accurate SPI bus RTC with integrated crystal and SRAM. [akpm@linux-foundation.org: don't use BIN2BCD/BCD2BIN] Signed-off-by: Dennis Aberilla <denzzzhome@yahoo.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | RTC: M48T35: new RTC driverThomas Bogendoerfer2008-10-15
| | | | | | | | | | | | | | | | | | This driver replaces the broken ip27-rtc driver in drivers/char and gives back RTC support for SGI IP27 machines. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: DS1286: New RTC driverThomas Bogendoerfer2008-10-15
| | | | | | | | | | | | | | | | | | This driver replaces the broken DS1286 driver in drivers/char and gives back RTC support for SGI IP22 and IP28 machines. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | drivers/rtc/Kconfig: don't build rtc-cmos.o on sparc32Andrew Morton2008-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix for linux-next's : Author: David S. Miller <davem@davemloft.net> 2008-08-28 19:54:17 : Committer: David S. Miller <davem@davemloft.net> 2008-08-29 14:16:45 : Parent: 7f60459921bd24e86b21e07c42244c510b4f46b2 (Blackfin RTC Driver: BF561 not have on-chip RTC) : Child: cca4c231028405950a15f5a27d7326d18d909784 (rtc: Add TI BQ4802 RTC driver.) : Branches: git-alsa-tiwai, linux-next : Follows: v2.6.27-rc4 : Precedes: next-20080902 : : rtc: Allow RTC_DRV_CMOS to be used on SPARC. In file included from drivers/rtc/rtc-cmos.c:40: include/asm-generic/rtc.h: In function 'rtc_is_updating': include/asm-generic/rtc.h:40: error: 'rtc_port' undeclared (first use in this function) include/asm-generic/rtc.h:40: error: (Each undeclared identifier is reported only once include/asm-generic/rtc.h:40: error: for each function it appears in.) include/asm-generic/rtc.h: In function 'get_rtc_time': include/asm-generic/rtc.h:73: error: 'rtc_port' undeclared (first use in this function) include/asm-generic/rtc.h: In function 'set_rtc_time': include/asm-generic/rtc.h:160: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_read_alarm': drivers/rtc/rtc-cmos.c:193: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_checkintr': drivers/rtc/rtc-cmos.c:255: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_irq_enable': drivers/rtc/rtc-cmos.c:272: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_irq_disable': drivers/rtc/rtc-cmos.c:292: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_set_alarm': drivers/rtc/rtc-cmos.c:337: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_irq_set_freq': drivers/rtc/rtc-cmos.c:378: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_procfs': drivers/rtc/rtc-cmos.c:455: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_nvram_read': drivers/rtc/rtc-cmos.c:519: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_nvram_write': drivers/rtc/rtc-cmos.c:551: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_interrupt': drivers/rtc/rtc-cmos.c:588: error: 'rtc_port' undeclared (first use in this function) drivers/rtc/rtc-cmos.c: In function 'cmos_do_probe': drivers/rtc/rtc-cmos.c:722: error: 'rtc_port' undeclared (first use in this function) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-22 21:10:09 -0500