aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/power/Kconfig
Commit message (Collapse)AuthorAge
* X-Power AXP288 PMIC Fuel Gauge DriverTodd Brandt2015-03-07
| | | | | | | | | | New power_supply driver at driver/power which interfaces with the axp20x mfd driver as a cell. Provides battery info, monitors for changes, and generates alerts on temperature and capacity issues Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: Add support for DA9150 ChargerAdam Thomson2015-02-25
| | | | | | | This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* Add LTC2941/LTC2943 Battery Gauge DriverMike Looijmans2015-01-21
| | | | | | | | | | | | | | | | | | | | Both the LTC2941 and LTC2943 measure battery capacity. The LTC2943 is compatible with the LTC2941, it adds voltage and temperature monitoring, and uses a slightly different conversion formula for the charge counter. To avoid confusion with e.g. the LTC2945, the driver is called LTC2941 instead of LTC294X. v2: Fix units of measurement: uV, uA and centidegrees. v3: Correctly set configuration register. Allow negative values for the sense resistor. v4: Run checkpatch.pl and fix all errors and warnings. v5: Prefix "lltc," to devicetree properties. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [ removed .owner field ] Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: charger-manager: Use alarmtimer for battery monitoring in suspend.Jonghwa Lee2015-01-21
| | | | | | | | | | | | To guerantee proper charing and managing batteries even in suspend, charger-manager has used rtc device with rtc framework interface. However, it is better to use alarmtimer for cleaner and more appropriate operation. This patch makes driver to use alarmtimer for polling work in suspend and removes all deprecated codes related with using rtc interface. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: max14577: Remove SYSFS dependency from KconfigKarol Wrona2015-01-21
| | | | | | | | | This is only a small clean-up. The driver can be built without SYSFS as there exist stubs for used functions. Signed-off-by: Karol Wrona <k.wrona@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: max77693: Add charger driver for Maxim 77693Krzysztof Kozlowski2015-01-20
| | | | | | | | | | | | | | | Add new driver for Maxim 77693 switch-mode charger (part of max77693 MFD driver) providing power supply class information to userspace. The charger has +20V tolerant input. Current input can be set from 0 to 2.58 A. The charger can deliver up to 2.1 A to the battery or 3.5 A to the system (when supplying additional current from battery to system). The driver is configured through DTS (battery and system related settings) and sysfs entries (timers and top-off charging threshold). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: rt5033_battery: Add RT5033 Fuel gauge device driverBeomho Seo2015-01-20
| | | | | | | | | | | | | | | This patch adds device driver of Richtek PMIC. The driver support battery fuel gauge. Fuel gauge calculates and determines the battery state of charge (SOC) according to battery open circuit voltage (OCV). Also, this driver provides battery average voltage, voltage and battery present property. Cc: Sebastian Reichel <sre@kernel.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* power: max14577: Fix circular config SYSFS dependencyKrzysztof Kozlowski2014-09-25
| | | | | | | | | | | | | | | | | | | | | Make the max14577 charger driver depending on SYSFS instead selecting it. This fixes warning on x86_64 with allmodconfig: scripts/kconfig/conf --allmodconfig Kconfig fs/sysfs/Kconfig:1:error: recursive dependency detected! fs/sysfs/Kconfig:1: symbol SYSFS is selected by CHARGER_MAX14577 drivers/power/Kconfig:327: symbol CHARGER_MAX14577 depends on POWER_SUPPLY drivers/power/Kconfig:1: symbol POWER_SUPPLY is selected by HID_SONY drivers/hid/Kconfig:638: symbol HID_SONY depends on NEW_LEDS drivers/leds/Kconfig:8: symbol NEW_LEDS is selected by SENSORS_APPLESMC drivers/hwmon/Kconfig:299: symbol SENSORS_APPLESMC depends on HWMON drivers/hwmon/Kconfig:5: symbol HWMON is selected by EEEPC_LAPTOP drivers/platform/x86/Kconfig:496: symbol EEEPC_LAPTOP depends on HOTPLUG_PCI drivers/pci/hotplug/Kconfig:5: symbol HOTPLUG_PCI depends on SYSFS Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* charger: max14577: Configure battery-dependent settings from DTS and sysfsKrzysztof Kozlowski2014-09-24
| | | | | | | | | | | | | | | | | | | | Remove hard-coded values for: - Fast Charge current, - End Of Charge current, - Fast Charge timer, - Overvoltage Protection Threshold, - Battery Constant Voltage, and use DTS or sysfs to configure them. This allows using the max14577 charger driver with different batteries. Now the charger driver requires valid configuration data from DTS. In case of wrong configuration data it fails during probe. The fast charge timer is configured through sysfs entry. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* charger: max14577: Add support for MAX77836 chargerKrzysztof Kozlowski2014-09-24
| | | | | | | | | | | | | | | | | | Add support for MAX77836 charger to the max14577 driver. The MAX77836 charger is almost the same as 14577 model except: - No dead-battery detection; - Support for special charger (like in MAX77693); - Support for DX over-voltage protection (like in MAX77693); - Lower values of charging current (two times lower current for slow/fast charge, much lower EOC current); - Slightly different values in ChgTyp field of STATUS2 register. On MAX14577 0x6 is reserved and 0x7 dead battery. On the MAX77836 the 0x6 means special charger and 0x7 is reserved. Regardless of these differences the driver maps them to one enum max14577_muic_charger_type. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* power: add driver for battery reading on iPaq h3xxxDmitry Artamonow2014-07-24
| | | | | | | | | | | | | This adds a driver for reading the battery status of the battery connected to the Atmel microcontroller on the iPAQ h3xxx series. Based on a driver from handhelds.org 2.6.21 kernel, written by Alessandro GARDICH. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-01-25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
| * power,goldfish: Add dependency on HAS_IOMEMRichard Weinberger2014-01-15
| | | | | | | | | | | | | | | | | | | | | | On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `goldfish_battery_probe': drivers/power/goldfish_battery.c:181: undefined reference to `devm_ioremap' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* | power_supply: Add charger support for Maxim 14577Krzysztof Kozlowski2013-12-23
|/ | | | | | | | | | | | MAX14577 chip is a multi-function device which includes MUIC, charger and voltage regulator. The driver is located in drivers/mfd. This patch supports battery charging control of MAX14577 chip and provides power supply class information to userspace. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* max17042_battery: Fix build errors caused by missing REGMAP_I2C configAustin Boyle2013-12-01
| | | | | | | | | | | | | | | | | | | | | | | max17042 now uses regmap interface but does not enable config option. This patch fixes the following build errors: drivers/power/max17042_battery.c:661:15: error: variable ‘max17042_regmap_config’ has initializer but incomplete type drivers/power/max17042_battery.c:662:2: error: unknown field ‘reg_bits’ specified in initializer drivers/power/max17042_battery.c:662:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:662:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c:663:2: error: unknown field ‘val_bits’ specified in initializer drivers/power/max17042_battery.c:663:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:663:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c:664:2: error: unknown field ‘val_format_endian’ specified in initializer drivers/power/max17042_battery.c:664:23: error: ‘REGMAP_ENDIAN_NATIVE’ undeclared here (not in a function) drivers/power/max17042_battery.c:664:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:664:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c: In function ‘max17042_probe’: drivers/power/max17042_battery.c:684:2: error: implicit declaration of function ‘devm_regmap_init_i2c’ Signed-off-by: Austin Boyle <boyle.austin@gmail.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power_supply: Add support for bq24735 chargerDarbha Sriharsha2013-10-25
| | | | | | | | | | | | | | | Adds support for the bq24735 charger chipset. The bq24735 is a high-efficiency, synchronous battery charger. It allows control of the charging current, input current, and the charger voltage DAC's through SMBus. Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Thanks-to: Stephen Warren <swarren@wwwdotorg.org> Thanks-to: Thierry Reding <thierry.reding@gmail.com> Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2013-09-13
| | | | | | | | After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* power: Add twl4030_madc battery driver.Marek Belisko2013-08-30
| | | | | | | | | | This driver is used and tested on gta04 phone. It's using twl4030_madc (similar to rx51 existing driver). Driver also implement charging and discharging calibration data so user can define ranges and level. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lukas Märdian <lukas@goldelico.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* bq24190_charger: Add support for TI BQ24190 Battery ChargerMark A. Greer2013-08-27
| | | | | | | | | | | | | | | | Add driver support for the Texas Instruments BQ24190 battery charger. Some of the information provided by the device is about the charger and other information is about the battery so create two power_supply objects (one for each) and provide the appropriate information for each one. The device has many fields that go beyond what is reasonable to report or modify using the existing 'POWER_SUPPLY_PROP_*' properties so the driver exports the register fields via sysfs. They are prefixed by 'f_' (for 'field') to make it easier to distinguish between a register field and a "normal" sysfs file exported by the power_supply infrastructure. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TESTPaul Gortmaker2013-08-09
| | | | | | | | | | | | | | | | | | | | Nearly all the other goldfish peripherals (mtd, keyboard, etc) have a dependency on the main platform's GOLDFISH Kconfig item, but this one got skipped. Even with consistency as a justification, there was initial resistance[1] from some people to adding it however, as they wanted the extra compile coverage. Now, with CONFIG_COMPILE_TEST, we have the middle ground that will give people the coverage who want it, and let those who don't want it to skip ever seeing the option presented. [1] https://lkml.org/lkml/2013/2/27/333 Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* Merge tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6Linus Torvalds2013-05-25
|\ | | | | | | | | | | | | | | | | | | | | | | Pull bettery fixes from Anton Vorontsov: "Last minute one-liners: wrong kfree usage fix, module alias fixup and kconfig adjustments" * tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6: pm2301_charger: Fix module alias prefix wm831x_backup: Fix wrong kfree call for devdata->backup.name bq27x00: Fix I2C dependency in KConfig lp8788-charger: Fix kconfig dependency
| * bq27x00: Fix I2C dependency in KConfigXiong Zhou2013-05-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes build failure(randconfig) of next-20130501. When config I2C as m, BATTERY_BQ27x00 as y, here comes the failure. The driver depends on I2C only if I2C is not disabled, as Lars commented. Last version of this patch make the driver depend on I2C unconditionally. Failure message: drivers/built-in.o: In function `bq27x00_read_i2c': bq27x00_battery.c:(.text+0x1082a7): undefined reference to `i2c_transfer' drivers/built-in.o: In function `bq27x00_battery_init': bq27x00_battery.c:(.init.text+0x6085): undefined reference to `i2c_register_driver' bq27x00_battery.c:(.init.text+0x60c7): undefined reference to `i2c_del_driver' drivers/built-in.o: In function `bq27x00_battery_exit': bq27x00_battery.c:(.exit.text+0xbf0): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
| * lp8788-charger: Fix kconfig dependencyRandy Dunlap2013-05-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build errors in lp8788-charger by making it depend on IIO. Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y. lp8788-charger.c:(.text+0x2146b5): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x2146ce): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x214a86): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214b51): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214c30): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214d93): undefined reference to `iio_channel_release' lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* | Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6Linus Torvalds2013-04-30
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery updates from Anton Vorontsov: "Highlights: - OpenFirmware/DeviceTree support for the Power Supply core: the core now automatically populates supplied_from hierarchy from the device tree. With these patches chargers and batteries can now lookup each other without the board files support shim. Rhyland Klein at NVIDIA did the work - New ST-Ericsson ABX500 hwmon driver. The driver is heavily using the AB85xx core and depends on some recent changes to it, so that is why the driver comes through the battery tree. It has an appropriate ack from the hwmon maintainer (i.e. Guenter Roeck). Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored the driver - Final bits to sync AB85xx ST-Ericsson changes into mainline. The changes touch mfd parts, but these were acked by the appropriate MFD maintainer (ie Samuel Ortiz). Lee Jones at Linaro did most of the work and lead the submission process. Minor changes, but still worth mentioning: - Battery temperature reporting fix for Nokia N900 phones - Versatile Express poweroff driver moved into drivers/power/reset/ - Tree-wide: use devm_kzalloc() where appropriate - Tree-wide: dev_pm_ops cleanups/fixes" * tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits) pm2301-charger: Fix suspend/resume charger-manager: Use kmemdup instead of kzalloc + memcpy power_supply: Populate supplied_from hierarchy from the device tree power_supply: Add core support for supplied_from power_supply: Define Binding for power-supplies rx51_battery: Fix reporting temperature hwmon: Add ST-Ericsson ABX500 hwmon driver ab8500_bmdata: Export abx500_res_to_temp tables for hwmon ab8500_{bmdata,fg}: Add const attributes to some data arrays ab8500_bmdata: Eliminate CamelCase warning of some variables ab8500_btemp: Make ab8500_btemp_get* interfaces public goldfish_battery: Use resource_size() lp8788-charger: Use PAGE_SIZE for the sysfs read operation max8925_power: Use devm_kzalloc() da9030_battery: Use devm_kzalloc() da9052-battery: Use devm_kzalloc() ds2760_battery: Use devm_kzalloc() ds2780_battery: Use devm_kzalloc() gpio-charger: Use devm_kzalloc() isp1704_charger: Use devm_kzalloc() ...
| * power_supply: Add support for tps65090-chargerRhyland Klein2013-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the tps65090 charger driver. This driver is responsible for controlling the charger aspect of the tps65090 mfd. Currently, this mainly consists of turning on and off the charger, but some features of the charger can be supported through this driver including: - Enable Auto Recharge based on Battery voltage - Fast Charge Safety Timer - Maximum battery discharge current - Maximum battery adapter current - Enable External Charge - Disable charging termination based on low charger current (supported) Once the driver is accepted, later patches can add support for the features above which are not yet supported. Based on work by: Syed Rafiuddin <srafiuddin@nvidia.com> Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
| * pm2301-charger: Always compile the PM2301 Charger driver with AB8500 Battery ↵Marcus Cooper2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | Mgnt The PM2301 Charger should always be available when using the AB8500 Battery Management system, we're ensuring this will be the case. Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Hakan BERG <hakan.berg@stericsson.com> Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
* | usb: phy: remove CONFIG_USB_OTG_UTILSFelipe Balbi2013-03-18
|/ | | | | | | | | | | | there are no more users of CONFIG_USB_OTG_UTILS left in tree, we can remove it just fine. [ kishon@ti.com : fixed a linking error due to original patch forgetting to change drivers/usb/Makefile ] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* goldfish_battery: Add missing GENERIC_HARDIRQS dependencyHeiko Carstens2013-02-16
| | | | | | | | | | Fix this link error on s390: ERROR: "devm_request_threaded_irq" [drivers/power/goldfish_battery.ko] undefined! Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* Merge branch 'tb-power-2' of git://git.linaro.org/people/ljones/linux-3.0-ux500Anton Vorontsov2013-02-02
|\ | | | | | | | | | | | | | | | | | | Pull a huge ab8500/pm2301 pile of changes from Lee Jones. Lee did an awesome job cleaning this stuff up and thus brought ab8500 Stericsson's development tree much closer to the mainline. Even more changes to come, though. Conflicts: drivers/power/Kconfig
| * pm2301: Provide u9540 support for the pm2301 chargerMichel JAOUEN2013-01-23
| | | | | | | | | | | | | | | | | | | | AC charger driver for the DB9540 based platforms. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com>
* | power: Add battery driver for goldfish emulatorMike Lockwood2013-02-02
|/ | | | | | | | | | | | | | | | | | | | Add the emulated power driver for the Goldfish platform. This folds together the code from the Google tree, Jun Nakajima's cleanups and x86 porting work, and then a tidy up to pass checkpatch. Signed-off-by: Mike A. Chan <mikechan@google.com> [cleanup and x86 support] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [ported to 3.4] Signed-off-by: Tom Keel <thomas.keel@intel.com> [ported to 3.7 and final tidy] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* Merge tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6Linus Torvalds2012-12-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery subsystem updates from Anton Vorontsov: "Highlights: - Two new drivers from Pali Rohár and N900 hackers: rx51_battery and bq2415x_charger. The drivers are a part of a solution to replace the proprietary Nokia BME stack - Power supply core now registers devices with a thermal cooling subsystem, so we can now automatically throttle charging. Thanks to Ramakrishna Pallala! - Device tree support for ab8500 and max8925_power drivers - Random fixups and enhancements for a bunch of drivers." * tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6: (22 commits) max8925_power: Add support for device-tree initialization ab8500: Add devicetree support for chargalg ab8500: Add devicetree support for charger ab8500: Add devicetree support for btemp ab8500: Add devicetree support for fuelgauge twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_* jz4740-battery: Use devm_request_and_ioremap jz4740-battery: Use devm_kzalloc bq27x00_battery: Fixup nominal available capacity reporting bq2415x_charger: Fix style issues bq2415x_charger: Add Kconfig/Makefile entries power_supply: Add bq2415x charger driver power_supply: Add new Nokia RX-51 (N900) power supply battery driver max17042_battery: Fix missing verify_model_lock() return value check ds2782_battery: Fix signedness bug in ds278x_read_reg16() lp8788-charger: Fix ADC channel names lp8788-charger: Fix wrong ADC conversion lp8788-charger: Use consumer device name on setting IIO channels power_supply: Register power supply for thermal cooling device power_supply: Add support for CHARGE_CONTROL_* attributes ...
| * ab8500: Add devicetree support for btempRajanikanth H.V2012-11-18
| | | | | | | | | | | | | | This patch adds device tree support for battery-temperature-monitor driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * bq2415x_charger: Add Kconfig/Makefile entriesAnton Vorontsov2012-11-18
| | | | | | | | | | | | | | This commit adds Kconfig and Makefile entries so that we could actually build the driver. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * power_supply: Add new Nokia RX-51 (N900) power supply battery driverPali Rohár2012-11-18
| | | | | | | | | | | | | | | | | | This driver exporting battery design capacity, temperature and voltage for battery in Nokia RX-51. This driver is needed for open source battery management on Nokia RX-51 (N900). Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | power: Add simple poweroff-gpio driverJamie Lentin2012-11-23
|/ | | | | | | | | | | Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6Linus Torvalds2012-10-07
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery updates from Anton Vorontsov: "1. New drivers: - Marvell 88pm860x charger and battery drivers; - Texas Instruments LP8788 charger driver; 2. Two new power supply properties: whether a battery is authentic, and chargers' maximal currents and voltages; 3. A lot of TI LP8727 Charger cleanups; 4. New features for Charger Manager, mainly now we can disable specific regulators; 5. Random fixes and cleanups for other drivers." Fix up trivial conflicts in <linux/mfd/88pm860x.h> * tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits) pda_power: Remove ac_draw_failed goto and label charger-manager: Add support sysfs entry for charger charger-manager: Support limit of maximum possible charger-manager: Check fully charged state of battery periodically lp8727_charger: More pure cosmetic improvements lp8727_charger: Fix checkpatch warning lp8727_charger: Add description in the private data lp8727_charger: Fix a typo - chg_parm to chg_param lp8727_charger: Make some cosmetic changes in lp8727_delayed_func() lp8727_charger: Clean up lp8727_charger_changed() lp8727_charger: Return if the battery is discharging lp8727_charger: Make lp8727_charger_get_propery() simpler lp8727_charger: Make lp8727_ctrl_switch() inline lp8727_charger: Make lp8727_init_device() shorter lp8727_charger: Clean up lp8727_is_charger_attached() lp8727_charger: Use specific definition lp8727_charger: Clean up lp8727 definitions lp8727_charger: Use the definition rather than enum lp8727_charger: Fix code for getting battery temp lp8727_charger: Clear interrrupts at inital time ...
| * power_supply: Enable battery-charger for 88pm860xJett.Zhou2012-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are charger and battery measurement feature for 88pm860x PMIC. For charger, it can support pre-charge with small current when battery is nearly exausted and then changed into fast-charge with CC&CV mode. For battery monitor, it can support battery measurement such as vbat,vsys,vchg and ibat etc,it can aslo accumulating the Coulomb value charged or discharged from battery based on Conlomb Counter, we use it to estimate battery capacity. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * power_supply: Add new lp8788 charger driverKim, Milo2012-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight driver and current sinks. This patch supports the charger operations including the charger interrupt handling. The LP8788 charger driver provides configurable platform data. The charger platform data includes ADC input ID, maximum battery voltage, charging parameters and etc. The ADC input is used for getting the battery voltage and temperature. Charging parameters are used for updating the charger operations such like setting charging current and setting End-of-charge conditions. When the charging interrupt occurs, power supply uevents are generated in order to update the user-space information. For platform specific charger action, the charger_event() function can be used in the platform side. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
| * power_supply: Remove broken mark for da9052-batteryAxel Lin2012-08-22
| | | | | | | | | | | | | | | | The fix for MFD part is already merged so we can remove the broken mark for da9052-battery. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | power: battery: Generic battery driver using IIOanish kumar2012-09-22
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver to allow use of the ADC drivers supported by the IIO subsystem for battery status monitoring. Connecting this driver to the relevant IIO device requires registration of the appropriate iio_map structure array by the IIO device driver (usually from platform data). If specified the driver will also make use of a gpio to provide interrupt driven notification that the battery is fully charged. In last version: Addressed concerns raised by lars: a. made the adc_bat per device. b. get the IIO channel using hardcoded channel names. c. Minor issues related to gpio_is_valid and some code refactoring. In V1: Addressed concerns raised by Anton: a. changed the struct name to gab(generic adc battery). b. Added some functions to neaten the code. c. Some minor coding guidelines changes. d. Used the latest function introduce by lars: iio_read_channel_processed to streamline the code. In V2: Addressed concerns by lars: a. No need of allocating memory for channels.Make it array. b. Code restructring, coding style and following kernel guidelines changes suggested by him. In V3: Addressed conerns by Anton: a. Added the copyright. b. Coding guidelines changes suggested by him. c. Added Makefile and Kconfig Signed-off-by: anish kumar <anish198519851985@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6Linus Torvalds2012-07-31
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery updates from Anton Vorontsov: "The tag contains just a few battery-related changes for v3.6. It's is all pretty straightforward, except one thing. One of our patches added thermal support for power supply class, but thermal/ subsystem changed under our feet. We (well, Stephen, that is) caught the issue and it was decided[1] that I'd just delay the battery pull request, and then will fix it up by merging upstream back into battery tree at the specific commit. That's not all though: another[2] small fixup for thermal subsystem was needed to get rid of a warning in power supply subsystem (the warning was not drivers/power's "fault", the thermal registration function just needed a proper const annotation, which is also done by a small commit on top of the merge. So, to sum this up: - The 'master' branch of the battery tree was in the -next tree for weeks, was never rebased, altered etc. It should be all OK; - Although, for-v3.6 tag contains the 'master' branch + merge + the warning fix. [1] http://lkml.org/lkml/2012/6/19/23 [2] http://lkml.org/lkml/2012/6/18/28" * tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits) thermal: Constify 'type' argument for the registration routine olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries olpc-battery: Add VOLTAGE_MAX_DESIGN property charger-manager: Fix build break related to EXTCON lp8727_charger: Move header file into platform_data directory power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT bq27x00_battery: Add support for BQ27425 chip charger-manager: Set current limit of regulator for over current protection charger-manager: Use EXTCON Subsystem to detect charger cables for charging test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties test_power: Add support for USB AC source gpio-charger: Use cansleep version of gpio_set_value bq27x00_battery: Add support for power average and health properties sbs-battery: Don't trigger false supply_changed event twl4030_charger: Allow charger to control the regulator that feeds it twl4030_charger: Add backup-battery charging twl4030_charger: Fix some typos max17042_battery: Support CHARGE_COUNTER power supply attribute smb347-charger: Add constant charge and current properties power_supply: Add constant charge_current and charge_voltage properties ...
| * charger-manager: Fix build break related to EXTCONChanwoo Choi2012-07-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch select CONFIG_EXTCON to resolve below build break of charger-manager because charger-manager use API of EXTCON subsystem. drivers/built-in.o: In function `charger_manager_probe': charger-manager.c:(.text+0x11d61a): undefined reference to `extcon_register_interest' charger-manager.c:(.text+0x11d7b6): undefined reference to `extcon_unregister_interest' drivers/built-in.o: In function `charger_manager_remove': charger-manager.c:(.devexit.text+0x8f3): undefined reference to `extcon_unregister_interest' Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2012-07-24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Trivial updates all over the place as usual." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits) Fix typo in include/linux/clk.h . pci: hotplug: Fix typo in pci iommu: Fix typo in iommu video: Fix typo in drivers/video Documentation: Add newline at end-of-file to files lacking one arm,unicore32: Remove obsolete "select MISC_DEVICES" module.c: spelling s/postition/position/g cpufreq: Fix typo in cpufreq driver trivial: typo in comment in mksysmap mach-omap2: Fix typo in debug message and comment scsi: aha152x: Fix sparse warning and make printing pointer address more portable. Change email address for Steve Glendinning Btrfs: fix typo in convert_extent_bit via: Remove bogus if check netprio_cgroup.c: fix comment typo backlight: fix memory leak on obscure error path Documentation: asus-laptop.txt references an obsolete Kconfig item Documentation: ManagementStyle: fixed typo mm/vmscan: cleanup comment error in balance_pgdat mm: cleanup on the comments of zone_reclaim_stat ...
| * | ab8500-btemp: Fix typo 'AB5500'Paul Bolle2012-06-28
| | | | | | | | | | | | | | | Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge branch 'for_3.6/pm/sr-move' of ↵Tony Lindgren2012-06-26
|\ \ \ | |_|/ |/| | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-driver
| * | ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/Jean Pihet2012-05-31
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After a clean-up of the interfaces the OMAP Smartreflex IP driver is now a generic driver. Move it to drivers/power/avs/. The build is controlled by the following Kconfig options: . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support, . CONFIG_POWER_AVS_OMAP: AVS(Adaptive Voltage Scaling) support on OMAP containing the version 1 or version 2 of the SmartReflex IP, . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | max17042_battery: Add support for max17047/50 chipRamakrishna Pallala2012-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | max17047 is improved version of max17042 chip. It has few HW bug fixes with minor changes in register set. max17050 is same as max17047 chip except its silicon packging. So from driver's point of view there is no difference btw max1047 and max1050. This patch adds the support to dynamically detect the chip type and adds steps to initialize the max17047 chip. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | power_supply: Fix a typo in BATTERY_DS2781 Kconfig entryAxel Lin2012-05-05
| | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | smb347-charger: Convert to regmap APIMika Westerberg2012-05-05
| | | | | | | | | | | | | | | | | | | | | | | | The smb347-charger driver does a lot of read-modify-write to the device registers. Instead of open-coding everything we can take advantage of regmap API which provides nice functions to do this kind of things. In addition there is no need for custom debugfs file for dumping registers as this is already provided by the regmap API. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 06:37:26 -0500