aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci
Commit message (Collapse)AuthorAge
* Merge branch 'pci/yijing-ari' into nextBjorn Helgaas2013-01-26
|\ | | | | | | | | | | | | | | | | | | | | * pci/yijing-ari: PCI: shpchp: Iterate over all devices in slot, not functions 0-7 PCI: sgihp: Iterate over all devices in slot, not functions 0-7 PCI: cpcihp: Iterate over all devices in slot, not functions 0-7 PCI: pciehp: Iterate over all devices in slot, not functions 0-7 PCI: Consolidate "next-function" functions PCI: Rename pci_enable_ari() to pci_configure_ari() PCI: Enable ARI if dev and upstream bridge support it; disable otherwise
| * PCI: shpchp: Iterate over all devices in slot, not functions 0-7Yijing Wang2013-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Iterate through devices in a slot by using the upstream bridge's "bus->devices" list instead of assuming they are functions 0-7. It's possible there are several slots on the same pci_bus, so restrict it to only devices matching this slot's device number. ARI (which allows functions 0-255) is a PCIe-only feature, and this is a PCI hotplug driver, so we shouldn't find anything other than functions 0-7, but it's better to iterate the same way as other hotplug drivers. [bhelgaas: changelog, check PCI_SLOT, fix shpchp_unconfigure_device()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: sgihp: Iterate over all devices in slot, not functions 0-7Yijing Wang2013-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Iterate through devices in a slot by using the upstream bridge's "bus->devices" list instead of assuming they are functions 0-7. It's possible there are several slots on the same pci_bus, so restrict it to only devices matching this slot's device number. ARI (which allows functions 0-255) is a PCIe-only feature, and this is a PCI hotplug driver, so we shouldn't find anything other than functions 0-7, but it's better to iterate the same way as other hotplug drivers. [bhelgaas: changelog, check PCI_SLOT, fix disable_slot()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: cpcihp: Iterate over all devices in slot, not functions 0-7Yijing Wang2013-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Iterate through devices in a slot by using the upstream bridge's "bus->devices" list instead of assuming they are functions 0-7. It's possible there are several slots on the same pci_bus, so restrict it to only devices matching this slot's device number. ARI (which allows functions 0-255) is a PCIe-only feature, and this is a PCI hotplug driver, so we shouldn't find anything other than functions 0-7, but it's better to iterate the same way as other hotplug drivers. [bhelgaas: changelog, check PCI_SLOT, fix cpci_unconfigure_slot()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: pciehp: Iterate over all devices in slot, not functions 0-7Yijing Wang2013-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we enumerate devices in a slot with pci_scan_slot(), then iterate through all the devices we found by looking for functions 0-7. But that's wrong for ARI devices, which may have function numbers up to 255. This means that when we hot-add an ARI device, pciehp only initializes functions 0-7, and other functions don't work correctly. Additionally, if we hot-remove the device, pciehp only removes functions 0-7, leaving stale pci_dev structures for any other functions. This patch fixes the problem by iterating over devices in a slot by using the upstream bridge's "bus->devices" list instead. [bhelgaas: changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: Consolidate "next-function" functionsYijing Wang2013-01-25
| | | | | | | | | | | | | | | | | | There are several next_fn functions (no_next_fn, next_trad_fn, next_ari_fn); consolidate them in next_fn() to simplify the code. [bhelgaas: make next_fn() static, rework control flow] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: Rename pci_enable_ari() to pci_configure_ari()Yijing Wang2013-01-25
| | | | | | | | | | | | | | | | | | | | pci_enable_ari() now supports enabling or disabling ARI forwarding. So rename pci_enable_ari() to pci_configure_ari() for easy understanding. No functional change. [bhelgaas: changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: Enable ARI if dev and upstream bridge support it; disable otherwiseYijing Wang2013-01-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we enable ARI in a device's upstream bridge if the bridge and the device support it. But we never disable ARI, even if the device is removed and replaced with a device that doesn't support ARI. This means that if we hot-remove an ARI device and replace it with a non-ARI multi-function device, we find only function 0 of the new device because the upstream bridge still has ARI enabled, and next_ari_fn() only returns function 0 for the new non-ARI device. This patch disables ARI in the upstream bridge if the device doesn't support ARI. See the PCIe spec, r3.0, sec 6.13. [bhelgaas: changelog, function comment] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'pci/rafael-set-root-bridge-handle' into nextBjorn Helgaas2013-01-17
|\ \ | | | | | | | | | | | | * pci/rafael-set-root-bridge-handle: ACPI / PCI: Set root bridge ACPI handle in advance
| * | ACPI / PCI: Set root bridge ACPI handle in advanceRafael J. Wysocki2013-01-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI handles of PCI root bridges need to be known to acpi_bind_one(), so that it can create the appropriate "firmware_node" and "physical_node" files for them, but currently the way it gets to know those handles is not exactly straightforward (to put it lightly). This is how it works, roughly: 1. acpi_bus_scan() finds the handle of a PCI root bridge, creates a struct acpi_device object for it and passes that object to acpi_pci_root_add(). 2. acpi_pci_root_add() creates a struct acpi_pci_root object, populates its "device" field with its argument's address (device->handle is the ACPI handle found in step 1). 3. The struct acpi_pci_root object created in step 2 is passed to pci_acpi_scan_root() and used to get resources that are passed to pci_create_root_bus(). 4. pci_create_root_bus() creates a struct pci_host_bridge object and passes its "dev" member to device_register(). 5. platform_notify(), which for systems with ACPI is set to acpi_platform_notify(), is called. So far, so good. Now it starts to be "interesting". 6. acpi_find_bridge_device() is used to find the ACPI handle of the given device (which is the PCI root bridge) and executes acpi_pci_find_root_bridge(), among other things, for the given device object. 7. acpi_pci_find_root_bridge() uses the name (sic!) of the given device object to extract the segment and bus numbers of the PCI root bridge and passes them to acpi_get_pci_rootbridge_handle(). 8. acpi_get_pci_rootbridge_handle() browses the list of ACPI PCI root bridges and finds the one that matches the given segment and bus numbers. Its handle is then used to initialize the ACPI handle of the PCI root bridge's device object by acpi_bind_one(). However, this is *exactly* the ACPI handle we started with in step 1. Needless to say, this is quite embarassing, but it may be avoided thanks to commit f3fd0c8 (ACPI: Allow ACPI handles of devices to be initialized in advance), which makes it possible to initialize the ACPI handle of a device before passing it to device_register(). Accordingly, add a new __weak routine, pcibios_root_bridge_prepare(), defaulting to an empty implementation that can be replaced by the interested architecutres (x86 and ia64 at the moment) with functions that will set the root bridge's ACPI handle before its dev member is passed to device_register(). Make both x86 and ia64 provide such implementations of pcibios_root_bridge_prepare() and remove acpi_pci_find_root_bridge() and acpi_get_pci_rootbridge_handle() that aren't necessary any more. Included is a fix for breakage on systems with non-ACPI PCI host bridges from Bjorn Helgaas. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | Merge branch 'pci/yinghai-survey-resources+acpi-scan' into nextBjorn Helgaas2013-01-10
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/yinghai-survey-resources+acpi-scan: ACPI / scan: Treat power resources in a special way ACPI: Remove unused struct acpi_pci_root.id member ACPI: Drop ACPI device .bind() and .unbind() callbacks ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c ACPI / PCI: Rework the setup and cleanup of device wakeup ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument ACPI: Replace ACPI device add_type field with a match_driver flag ACPI: Drop the second argument of acpi_bus_scan() ACPI: Remove the arguments of acpi_bus_add() that are not used ACPI: Remove acpi_start_single_object() and acpi_bus_start() ACPI / PCI: Fold acpi_pci_root_start() into acpi_pci_root_add() ACPI: Change the ordering of acpi_bus_check_add() ACPI: Replace struct acpi_bus_ops with enum type ACPI: Reduce the usage of struct acpi_bus_ops ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different ACPI: Change the ordering of PCI root bridge driver registrarion ACPI: Separate adding ACPI device objects from probing ACPI drivers
| * | Merge branch 'acpi-scan' of ↵Bjorn Helgaas2013-01-10
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into pci/yinghai-survey-resources+acpi-scan * 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: Treat power resources in a special way ACPI: Remove unused struct acpi_pci_root.id member ACPI: Drop ACPI device .bind() and .unbind() callbacks ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c ACPI / PCI: Rework the setup and cleanup of device wakeup ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument ACPI: Replace ACPI device add_type field with a match_driver flag ACPI: Drop the second argument of acpi_bus_scan() ACPI: Remove the arguments of acpi_bus_add() that are not used ACPI: Remove acpi_start_single_object() and acpi_bus_start() ACPI / PCI: Fold acpi_pci_root_start() into acpi_pci_root_add() ACPI: Change the ordering of acpi_bus_check_add() ACPI: Replace struct acpi_bus_ops with enum type ACPI: Reduce the usage of struct acpi_bus_ops ACPI: Make acpi_bus_add() and acpi_bus_start() visibly different ACPI: Change the ordering of PCI root bridge driver registrarion ACPI: Separate adding ACPI device objects from probing ACPI drivers Conflicts: drivers/acpi/pci_root.c
| | * | ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.cRafael J. Wysocki2013-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the code related to _PRT setup and removal and to power resources from acpi_pci_bind() and acpi_pci_unbind() to the .setup() and .cleanup() callbacks in acpi_pci_bus and remove acpi_pci_bind() and acpi_pci_unbind() that have no purpose any more. Accordingly, remove the code related to device .bind() and .unbind() operations from the ACPI PCI root bridge driver. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
| | * | ACPI / PCI: Rework the setup and cleanup of device wakeupRafael J. Wysocki2013-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the ACPI wakeup capability of PCI devices is set up in two different places, partially in acpi_pci_bind() where runtime wakeup is initialized and partially in platform_pci_wakeup_init(), where system wakeup is initialized. The cleanup is only done in acpi_pci_unbind() and it only covers runtime wakeup. Use the new .setup() and .cleanup() callbacks in struct acpi_bus_type to consolidate that code and do the setup and the cleanup each in one place. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
| | * | ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argumentRafael J. Wysocki2013-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The callers of acpi_bus_add() usually assume that if it has succeeded, then a struct acpi_device object has been attached to the handle passed as the first argument. Unfortunately, however, this assumption is wrong, because acpi_bus_scan(), and acpi_bus_add() too as a result, may return a pointer to a different struct acpi_device object on success (it may be an object corresponding to one of the descendant ACPI nodes in the namespace scope below that handle). For this reason, the callers of acpi_bus_add() who care about whether or not a struct acpi_device object has been created for its first argument need to check that using acpi_bus_get_device() anyway, so the second argument of acpi_bus_add() is not really useful for them. The same observation applies to acpi_bus_scan() executed directly from acpi_scan_init(). Therefore modify the relevant callers of acpi_bus_add() to check the existence of the struct acpi_device in question with the help of acpi_bus_get_device() and drop the no longer necessary second argument of acpi_bus_add(). Accordingly, modify acpi_scan_init() to use acpi_bus_get_device() to get acpi_root and drop the no longer needed second argument of acpi_bus_scan(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
| | * | ACPI: Remove the arguments of acpi_bus_add() that are not usedRafael J. Wysocki2013-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Notice that acpi_bus_add() uses only 2 of its 4 arguments and redefine its header to match the body. Update all of its callers as necessary and observe that this leads to quite a number of removed lines of code (Linus will like that). Add a kerneldoc comment documenting acpi_bus_add() and wonder how its callers make wrong assumptions about the second argument (make note to self to take care of that later). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
| | * | ACPI: Remove acpi_start_single_object() and acpi_bus_start()Rafael J. Wysocki2013-01-03
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI PCI root bridge driver was the only ACPI driver implementing the .start() callback, which isn't used by any ACPI drivers any more now. For this reason, acpi_start_single_object() has no purpose any more, so remove it and all references to it. Also remove acpi_bus_start_device(), whose only purpose was to call acpi_start_single_object(). Moreover, since after the removal of acpi_bus_start_device() the only purpose of acpi_bus_start() remains to call acpi_update_all_gpes(), move that into acpi_bus_add() and drop acpi_bus_start() too, remove its header from acpi_bus.h and update all of its former users accordingly. This change was previously proposed in a different from by Yinghai Lu. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
* | | Merge branch 'pci/yinghai-survey-resources' into nextBjorn Helgaas2013-01-09
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/yinghai-survey-resources: x86/PCI: Implement pcibios_resource_survey_bus() PCI/ACPI: Reserve firmware-allocated resources for hot-added root buses x86/PCI: Keep resource allocation functions after boot x86/PCI: Don't track firmware-assigned BAR values for hot-added devices x86/PCI: Factor out pcibios_allocate_dev_rom_resource() x86/PCI: Allocate resources on a per-bus basis for hot-adding root buses x86/PCI: Factor out pcibios_allocate_dev_resources() x86/PCI: Factor out pcibios_allocate_bridge_resources()
| * | PCI/ACPI: Reserve firmware-allocated resources for hot-added root busesYinghai Lu2013-01-07
| |/ | | | | | | | | | | | | | | Firmware may have assigned PCI BARs for hot-added devices, so reserve those resources before trying to allocate more. [bhelgaas: move empty weak definition here] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: cpqphp: Cleanup and remove unreachable pathsSasha Levin2013-01-07
| | | | | | | | | | | | Remove redundant checks and unreachable paths. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: Drop "__" prefix on __pci_enable_device_flags()Bjorn Helgaas2013-01-04
| | | | | | | | | | Drop the useless "__" prefix on __pci_enable_device_flags(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: Use "unsigned long" for __pci_enable_device_flags to match ioport.hBjorn Helgaas2013-01-04
|/ | | | | | | __pci_enable_device_flags() takes values like IORESOURCE_IO and IORESOURCE_MEM, which are values for struct resource.flags, which is "unsigned long", not "resource_size_t". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski2012-12-26
| | | | | | | | | | | | | | | | | Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> CC: stable@vger.kernel.org
* PCI/PM: Do not suspend port if any subordinate device needs PME pollingHuang Ying2012-12-26
| | | | | | | | | | | | | | | | | | | | | | Ulrich reported that his USB3 cardreader does not work reliably when connected to the USB3 port. It turns out that USB3 controller failed to awaken when plugging in the USB3 cardreader. Further experiments found that the USB3 host controller can only be awakened via polling, not via PME interrupt. But if the PCIe port to which the USB3 host controller is connected is suspended, we cannot poll the controller because its config space is not accessible when the PCIe port is in a low power state. To solve the issue, the PCIe port will not be suspended if any subordinate device needs PME polling. [bhelgaas: use bool consistently rather than mixing int/bool] Reference: http://lkml.kernel.org/r/50841CCC.9030809@uli-eckhardt.de Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
* PCI: Remove spurious error for sriov_numvfs store and simplify flowBjorn Helgaas2012-12-26
| | | | | | | | | | | | | | | If we request "num_vfs" and the driver's sriov_configure() method enables exactly that number ("num_vfs_enabled"), we complain "Invalid value for number of VFs to enable" and return an error. We should silently return success instead. Also, use kstrtou16() since numVFs is defined to be a 16-bit field and rework to simplify control flow. Reported-by: Greg Rose <gregory.v.rose@intel.com> Reference: http://lkml.kernel.org/r/20121214101911.00002f59@unknown Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Donald Dutile <ddutile@redhat.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-12-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "Add support to generate code for the latest machine zEC12, MOD and XOR instruction support for the BPF jit compiler, the dasd safe offline feature and the big one: the s390 architecture gets PCI support!! Right before the world ends on the 21st ;-)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/qdio: rename the misleading PCI flag of qdio devices s390/pci: remove obsolete email addresses s390/pci: speed up __iowrite64_copy by using pci store block insn s390/pci: enable NEED_DMA_MAP_STATE s390/pci: no msleep in potential IRQ context s390/pci: fix potential NULL pointer dereference in dma_free_seg_table() s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset s390/bpf,jit: add support for XOR instruction s390/bpf,jit: add support MOD instruction s390/cio: fix pgid reserved check vga: compile fix, disable vga for s390 s390/pci: add PCI Kconfig options s390/pci: s390 specific PCI sysfs attributes s390/pci: PCI hotplug support via SCLP s390/pci: CHSC PCI support for error and availability events s390/pci: DMA support s390/pci: PCI adapter interrupts for MSI/MSI-X s390/bitops: find leftmost bit instruction support s390/pci: CLP interface s390/pci: base support ...
| * s390/pci: PCI hotplug support via SCLPJan Glauber2012-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | Add SCLP PCI configure/deconfigure and implement a PCI hotplug controller (s390_pci_hpc). The hotplug controller creates a slot for every PCI function in stand-by or configured state. The PCI functions are named after the PCI function ID (fid). By writing to the power attribute in /sys/bus/pci/slots/<fid>/power the PCI function is moved to stand-by or configured state. If moved to the configured state the device is automatically scanned by the s390 PCI layer. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * s390/pci: PCI adapter interrupts for MSI/MSI-XJan Glauber2012-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support PCI adapter interrupts using the Single-IRQ-mode. Single-IRQ-mode disables an adapter IRQ automatically after delivering it until the SIC instruction enables it again. This is used to reduce the number of IRQs for streaming workloads. Up to 64 MSI handlers can be registered per PCI function. A hash table is used to map interrupt numbers to MSI descriptors. The interrupt vector is scanned using the flogr instruction. Only MSI/MSI-X interrupts are supported, no legacy INTs. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2012-12-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
| * \ Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas2012-12-10
| |\ \ | | | | | | | | | | | | | | | | * pci/mjg-pci-roms-from-efi: PCI: Use phys_addr_t for physical ROM address
| | * | PCI: Use phys_addr_t for physical ROM addressBjorn Helgaas2012-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use phys_addr_t rather than "void *" for physical memory address. This removes casts and fixes a "cast from pointer to integer of different size" warning on ppc44x_defconfig. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | Merge branch 'pci/bjorn-pcie-cap' into nextBjorn Helgaas2012-12-07
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/bjorn-pcie-cap: ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names PCI: Add and use standard PCI-X Capability register names
| | * | | PCI: Add standard PCIe Capability Link ASPM field namesBjorn Helgaas2012-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add standard #defines for ASPM fields in PCI Express Link Capability and Link Control registers. Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but these are defined for the Linux ASPM interfaces, e.g., pci_disable_link_state(), and only coincidentally match the actual register bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match the register bit. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
| | * | | PCI/portdrv: Use PCI Express Capability accessorsBjorn Helgaas2012-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | Use PCI Express Capability access functions to simplify portdrv. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | PCI: Use standard PCIe Capability Link register field namesBjorn Helgaas2012-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the standard #defines for PCIe Link Status and Capability registers rather than bare numbers. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | PCI: Add and use standard PCI-X Capability register namesBjorn Helgaas2012-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add and use #defines for PCI-X Capability registers and fields. Note that the PCI-X Capability has a different layout for type 0 (endpoint) and type 1 (bridge) devices. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas2012-12-06
| |\ \ \ \ | | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/mjg-pci-roms-from-efi: x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR
| | * | | PCI: Add support for non-BAR ROMsMatthew Garrett2012-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platforms may provide their own mechanisms for obtaining ROMs. Add support for using data provided by the platform in that case. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Seth Forshee <seth.forshee@canonical.com>
| | * | | PCI: Add pcibios_add_deviceMatthew Garrett2012-12-05
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platforms may want to provide architecture-specific functionality during PCI enumeration. Add a pcibios_add_device() call that architectures can override to do so. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Seth Forshee <seth.forshee@canonical.com>
| * | | Merge branch 'pci/huang-d3cold-fixes' into nextBjorn Helgaas2012-12-04
| |\ \ \ | | | | | | | | | | | | | | | | | | | | * pci/huang-d3cold-fixes: PCI/PM: Keep runtime PM enabled for unbound PCI devices
| | * | | PCI/PM: Keep runtime PM enabled for unbound PCI devicesHuang Ying2012-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For unbound PCI devices, what we need is: - Always in D0 state, because some devices do not work again after being put into D3 by the PCI bus. - In SUSPENDED state if allowed, so that the parent devices can still be put into low power state. To satisfy these requirements, the runtime PM for the unbound PCI devices are disabled and set to SUSPENDED state. One issue of this solution is that the PCI devices will be put into SUSPENDED state even if the SUSPENDED state is forbidden via the sysfs interface (.../power/control) of the device. This is not an issue for most devices, because most PCI devices are not used at all if unbound. But there are exceptions. For example, unbound VGA card can be used for display, but suspending its parents makes it stop working. To fix the issue, we keep the runtime PM enabled when the PCI devices are unbound. But the runtime PM callbacks will do nothing if the PCI devices are unbound. This way, we can put the PCI devices into SUSPENDED state without putting the PCI devices into D3 state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48201 Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
| * | | | Merge branch 'pci/misc' into nextBjorn Helgaas2012-11-30
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * pci/misc: xen-pcifront: Handle backend CLOSED without CLOSING
| | * | | | xen-pcifront: Handle backend CLOSED without CLOSINGDavid Vrabel2012-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backend drivers shouldn't transition to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * | | | | Merge branch 'pci/misc' into nextBjorn Helgaas2012-11-28
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/misc: PCI/AER: Report success only when every device has AER-aware driver Conflicts: drivers/pci/pcie/aer/aerdrv_core.c
| | * | | | PCI/AER: Report success only when every device has AER-aware driverVijay Mohan Pandarathil2012-11-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an error is detected on a PCIe device which does not have an AER-aware driver, prevent AER infrastructure from reporting successful error recovery. This is because the report_error_detected() function that gets called in the first phase of recovery process allows forward progress even when the driver for the device does not have AER capabilities. It seems that all callbacks (in pci_error_handlers structure) registered by drivers that gets called during error recovery are not mandatory. So the intention of the infrastructure design seems to be to allow forward progress even when a specific callback has not been registered by a driver. However, if error handler structure itself has not been registered, it doesn't make sense to allow forward progress. As a result of the current design, in the case of a single device having an AER-unaware driver or in the case of any function in a multi-function card having an AER-unaware driver, a successful recovery is reported. Typical scenario this happens is when a PCI device is detached from a KVM host and the pci-stub driver on the host claims the device. The pci-stub driver does not have error handling capabilities but the AER infrastructure still reports that the device recovered successfully. The changes proposed here leaves the device(s)in an unrecovered state if the driver for the device or for any device in the subtree does not have error handler structure registered. This reflects the true state of the device and prevents any partial recovery (or no recovery at all) reported as successful. [bhelgaas: changelog] Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linas Vepstas <linasvepstas@gmail.com> Reviewed-by: Myron Stowe <myron.stowe@redhat.com>
| * | | | | Merge branch 'for-linus' into nextBjorn Helgaas2012-11-26
| |\ \ \ \ \ | | | |_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * for-linus: PCI/portdrv: Don't create hotplug slots unless port supports hotplug PCI/PM: Fix proc config reg access for D3cold and bridge suspending PCI/PM: Resume device before shutdown PCI/PM: Fix deadlock when unbinding device if parent in D3cold
| * | | | | Merge branch 'pci/misc' into nextBjorn Helgaas2012-11-13
| |\ \ \ \ \ | | | |/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/misc: PCI/ACPI: Notify PCI devices when their power resource is turned on PCI: Add GPL license for drivers/pci/ioapic module PCI: Fix bit definitions of PCI_EXP_LNKCAP2 register
| | * | | | PCI: Add GPL license for drivers/pci/ioapic moduleAndrew Cooks2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Config PCI_IOAPIC turned into a tristate in commit b95a7bd70046, but no module license is specified. This adds the missing module license. Signed-off-by: Andrew Cooks <acooks@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jan Beulich <jbeulich@suse.com>
| * | | | | Merge branch 'pci/don-sriov' into nextBjorn Helgaas2012-11-13
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/don-sriov: PCI: Remove useless "!dev" tests PCI: Use spec names for SR-IOV capability fields PCI: Provide method to reduce the number of total VFs supported PCI: SRIOV control and status via sysfs PCI: Use is_visible() with boot_vga attribute for pci_dev PCI: Add pci_device_type to pdev's device struct
| | * | | | | PCI: Remove useless "!dev" testsBjorn Helgaas2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to check "!dev" when the caller should always supply a valid pointer. If the caller *doesn't* supply a valid pointer, it probably won't check for a failure return either. This way we'll oops and get a backtrace. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-29 06:30:20 -0400