aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/remove.c
Commit message (Collapse)AuthorAge
* PCI: Add pcibios hooks for adding and removing PCI busesJiang Liu2013-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | On ACPI-based platforms, the pci_slot driver creates PCI slot devices according to information from ACPI tables by registering an ACPI PCI subdriver. The ACPI PCI subdriver will only be called when creating/ destroying PCI root buses, and it won't be called when hot-plugging P2P bridges. It may cause stale PCI slot devices after hot-removing a P2P bridge if that bridge has associated PCI slots. And the acpiphp driver has the same issue too. This patch introduces two hook points into the PCI core, which will be invoked when creating/destroying PCI buses for PCI host and P2P bridges. They could be used to setup/destroy platform dependent stuff in a unified way, both at boot time and for PCI hotplug operations. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Myron Stowe <myron.stowe@redhat.com>
* PCI: When removing bus, always remove legacy files & unregisterJiang Liu2013-04-12
| | | | | | | | | | | | | | | We always call device_register() and pci_create_legacy_files() for a new bus before handing out the "struct pci_bus *". Therefore, there's no possiblity of removing the bus with pci_remove_bus() before those calls have been made, so we don't need to check "bus->is_added" before calling pci_remove_legacy_files() and device_unregister(). [bhelgaas: changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
* Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds2013-02-26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
| * PCI: Make device create/destroy logic symmetricJiang Liu2013-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to device model documentation, the way to create/destroy PCI devices should be symmetric. The rule is to either use 1) device_register()/device_unregister() or 2) device_initialize()/device_add()/device_del()/put_device(). So change PCI core logic to follow the rule and get rid of the redundant pci_dev_get()/pci_dev_put() pair. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | PCI/PM: Clean up PME state when removing a deviceRafael J. Wysocki2013-02-13
|/ | | | | | | | | | | | | | | | | | | | | | Devices are added to pci_pme_list when drivers use pci_enable_wake() or pci_wake_from_d3(), but they aren't removed from the list unless the driver explicitly disables wakeup. Many drivers never disable wakeup, so their devices remain on the list even after they are removed, e.g., via hotplug. A subsequent PME poll will oops when it tries to touch the device. This patch disables PME# on a device before removing it, which removes the device from pci_pme_list. This is safe even if the device never had PME# enabled. This oops can be triggered by unplugging a Thunderbolt ethernet adapter on a Macbook Pro, as reported by Daniel below. [bhelgaas: changelog] Reference: http://lkml.kernel.org/r/CAMVG2svG21yiM1wkH4_2pen2n+cr2-Zv7TbH3Gj+8MwevZjDbw@mail.gmail.com Reported-and-tested-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
* PCI: Add pci_stop_and_remove_root_bus()Yinghai Lu2012-11-03
| | | | | | It supports both PCI root bus and PCI bus under PCI bridge. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Stop all children first, before removing all childrenYinghai Lu2012-09-20
| | | | | | | | | | This restores the previous behavior of stopping all child devices before removing any of them. The current SR-IOV design, where removing the PF also drops references on all the VFs, depends on having the VFs continue to exist after having been stopped. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Leave normal LIST_POISON in deleted list entriesBjorn Helgaas2012-08-22
| | | | | | | | list_del() already sets next/prev to LIST_POISON1/LIST_POISON2, so we don't need to do anything special here to prevent further list accesses. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Rename local variables to conventional namesBjorn Helgaas2012-08-22
| | | | | | | "bus" is the conventional name for a "struct pci_bus *" variable. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Remove unused, commented-out, codeBjorn Helgaas2012-08-22
| | | | | | | This removes unused code that was already commented out. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Stop and remove devices in one passBjorn Helgaas2012-08-22
| | | | | | | | | | | | | | | Previously, when we removed a PCI device, we made two passes over the hierarchy rooted at the device. In the first pass, we stopped all the devices, and in the second, we removed them. This patch combines the two passes into one so that we remove a device as soon as it and all its children have been stopped. Note that we previously stopped devices in reverse order and removed them in forward order. Now we stop and remove them in reverse order. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Fold stop and remove helpers into their callersBjorn Helgaas2012-08-22
| | | | | | | | | pci_stop_bus_devices() is only two lines of code and is only called by pci_stop_bus_device(), so I think it's easier to read if we just fold it into the caller. Similarly for __pci_remove_behind_bridge(). Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Use list_for_each_entry() for bus->devices traversalBjorn Helgaas2012-08-22
| | | | | | | | Replace list_for_each() + pci_dev_b() with the simpler list_for_each_entry(). Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Remove pci_stop_and_remove_behind_bridge()Bjorn Helgaas2012-08-22
| | | | | | | | | | | The PCMCIA CardBus driver was the only user of pci_stop_and_remove_behind_bridge(), and it now uses pci_stop_and_remove_bus_device() instead, so remove this interface. This removes exported symbol pci_stop_and_remove_behind_bridge. Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: Don't export stop_bus_device and remove_bus_device interfacesBjorn Helgaas2012-08-22
| | | | | | | | | | | | | | The acpiphp hotplug driver was the only user of pci_stop_bus_device() and __pci_remove_bus_device(), and it now uses pci_stop_and_remove_bus_device() instead, so stop exposing these interfaces. This removes these exported symbols: __pci_remove_bus_device pci_stop_bus_device Tested-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* PCI: release busn_res when removing busYinghai Lu2012-06-13
| | | | | | Release bus number resource when removing a bus. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: export __pci_remove_bus_deviceYinghai Lu2012-02-27
| | | | | | | | | | | Don't switch to pci_remove_bus_device yet, keep the __ prefix for now (the behavior is still the same: remove without stopping first). This allows other out of tree users or pending patches to get notified from compiler warning. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridgeYinghai Lu2012-02-27
| | | | | | | | | | The old pci_remove_behind_bridge actually do stop and remove. Make the name reflect that to reduce confusion. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_deviceYinghai Lu2012-02-27
| | | | | | | | | | | | | The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: make sriov work with hotplug removeYinghai Lu2012-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When hot removing a pci express module that has a pcie switch and supports SRIOV, we got: [ 5918.610127] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 1 [ 5918.615779] pciehp 0000:80:02.2:pcie04: Attention button interrupt received [ 5918.622730] pciehp 0000:80:02.2:pcie04: Button pressed on Slot(3) [ 5918.629002] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 1f9 [ 5918.637416] pciehp 0000:80:02.2:pcie04: PCI slot #3 - powering off due to button press. [ 5918.647125] pciehp 0000:80:02.2:pcie04: pcie_isr: intr_loc 10 [ 5918.653039] pciehp 0000:80:02.2:pcie04: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200 [ 5918.661229] pciehp 0000:80:02.2:pcie04: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0 [ 5924.667627] pciehp 0000:80:02.2:pcie04: Disabling domain:bus:device=0000:b0:00 [ 5924.674909] pciehp 0000:80:02.2:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 2f9 [ 5924.683262] pciehp 0000:80:02.2:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:b0:00 [ 5924.693976] libfcoe_device_notification: NETDEV_UNREGISTER eth6 [ 5924.764979] libfcoe_device_notification: NETDEV_UNREGISTER eth14 [ 5924.873539] libfcoe_device_notification: NETDEV_UNREGISTER eth15 [ 5924.995209] libfcoe_device_notification: NETDEV_UNREGISTER eth16 [ 5926.114407] sxge 0000:b2:00.0: PCI INT A disabled [ 5926.119342] BUG: unable to handle kernel NULL pointer dereference at (null) [ 5926.127189] IP: [<ffffffff81353a3b>] pci_stop_bus_device+0x33/0x83 [ 5926.133377] PGD 0 [ 5926.135402] Oops: 0000 [#1] SMP [ 5926.138659] CPU 2 [ 5926.140499] Modules linked in: ... [ 5926.143754] [ 5926.275823] Call Trace: [ 5926.278267] [<ffffffff81353a38>] pci_stop_bus_device+0x30/0x83 [ 5926.284180] [<ffffffff81353af4>] pci_remove_bus_device+0x1a/0xba [ 5926.290264] [<ffffffff81366311>] pciehp_unconfigure_device+0x110/0x17b [ 5926.296866] [<ffffffff81365dd9>] ? pciehp_disable_slot+0x188/0x188 [ 5926.303123] [<ffffffff81365d6f>] pciehp_disable_slot+0x11e/0x188 [ 5926.309206] [<ffffffff81365e68>] pciehp_power_thread+0x8f/0xe0 ... +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]-- | +-02.2-[b0-bf]----00.0-[b1-b3]--+-02.0-[b2]--+-00.0 Device | | | +-00.1 Device | | | +-00.2 Device | | | \-00.3 Device | | \-03.0-[b3]--+-00.0 Device | | +-00.1 Device | | +-00.2 Device | | \-00.3 Device root complex: 80:02.2 pci express modules: have pcie switch and are listed as b0:00.0, b1:02.0 and b1:03.0. end devices are b2:00.0 and b3.00.0. VFs are: b2:00.1,... b2:00.3, and b3:00.1,...,b3:00.3 Root cause: when doing pci_stop_bus_device() with phys fn, it will stop virt fn and remove the fn, so list_for_each_safe(l, n, &bus->devices) will have problem to refer freed n that is pointed to vf entry. Solution is just replacing list_for_each_safe() with list_for_each_prev_safe(). This will make sure we can get valid n pointer to PF instead of the freed VF pointer (because newly added devices are inserted to the bus->devices list tail). During reviewing the patch, Bjorn said: | The PCI hot-remove path calls pci_stop_bus_devices() via | pci_remove_bus_device(). | | pci_stop_bus_devices() traverses the bus->devices list (point A below), | stopping each device in turn, which calls the driver remove() method. When | the device is an SR-IOV PF, the driver calls pci_disable_sriov(), which | also uses pci_remove_bus_device() to remove the VF devices from the | bus->devices list (point B). | | pci_remove_bus_device | pci_stop_bus_device | pci_stop_bus_devices(subordinate) | list_for_each(bus->devices) <-- A | pci_stop_bus_device(PF) | ... | driver->remove | pci_disable_sriov | ... | pci_remove_bus_device(VF) | <remove from bus_list> <-- B | | At B, we're changing the same list we're iterating through at A, so when | the driver remove() method returns, the pci_stop_bus_devices() iterator has | a pointer to a list entry that has already been freed. Discussion thread can be found : https://lkml.org/lkml/2011/10/15/141 https://lkml.org/lkml/2012/1/23/360 -v5: According to Linus to make remove more robust, Change to list_for_each_prev_safe instead. That is more reasonable, because those devices are added to tail of the list before. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Fix pci cardbus removalYinghai Lu2012-02-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | During test busn_res allocation with cardbus, found pci card removal is not working anymore, and it turns out it is broken by: |commit 79cc9601c3e42b4f0650fe7e69132ebce7ab48f9 |Date: Tue Nov 22 21:06:53 2011 -0800 | | PCI: Only call pci_stop_bus_device() one time for child devices at remove The above changed the behavior of pci_remove_behind_bridge that yenta_cardbus depended on. So restore the old behavoir of pci_remove_behind_bridge (which requires stopping and removing of all devices) by: 1. rename pci_remove_behind_bridge to __pci_remove_behind_bridge, and let __pci_remove_bus_device() call it instead. 2. add pci_stop_behind_bridge that will stop devices behind a bridge 3. add back pci_remove_behind_bridge that will stop and remove devices under bridge. -v2: update commit description a little bit. Tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Only call pci_stop_bus_device() one time for child devices at removeYinghai Lu2012-01-06
| | | | | | | | | | | | | During debugging pcie hotplug with SRIOV with pcie switch, I found pci_stop_bus_device() is called several times for some child devices. So change original pci_remove_bus_device() to __pci_remove_bus_device(), and make it only do remove work, and add a new pci_remove_bus_device that calls pci_stop_bus_device() one time, and then call __pci_remove_bus_device(). Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/sysfs: move bus cpuaffinity to class dev_attrsYinghai Lu2011-05-21
| | | | | | | | | Requested by Greg KH to fix a race condition in the creating of PCI bus cpuaffinity files. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: eliminate redundant pci_stop_dev() call from pci_destroy_dev()Alex Chiang2009-06-11
| | | | | | | | | | We always call pci_stop_bus_device before calling pci_destroy_dev. Since pci_stop_bus_device calls pci_stop_dev, there is no need for pci_destroy_dev to repeat the call. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix kernel oops on bridge removalKenji Kaneshige2009-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following kernel oops problem that happens when removing PCI bridge with pciehp loaded. It should also occur with other hotplug driver that is implemented as a bridge's driver. [ 459.997257] pciehp 0000:2f:04.0:pcie24: unloading service driver pciehp [ 459.997495] general protection fault: 0000 [#1] SMP [ 459.997737] last sysfs file: /sys/devices/pci0000:00/0000:00:04.0/0000:2e:00.0/0000:2f:04.0/remove [ 459.997964] CPU 4 [ 459.998129] Modules linked in: pciehp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc cpufreq_ondemand acpi_cpufreq dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport mptspi mptscsih mptbase scsi_transport_spi e1000e sg sr_mod cdrom button serio_raw i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_sas sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode] [ 459.998129] Pid: 56, comm: events/4 Not tainted 2.6.29-rc8-kk #1 PRIMERGY [ 459.998129] RIP: 0010:[<ffffffff803bf047>] [<ffffffff803bf047>] pci_slot_release+0x37/0x100 [ 459.998129] RSP: 0018:ffff88083b3bf9e0 EFLAGS: 00010246 [ 459.998129] RAX: ffff88083adc5158 RBX: ffff880836c1bc80 RCX: 6b6b6b6b6b6b6b6b [ 459.998129] RDX: 0000000000000000 RSI: ffffffff803a77f0 RDI: ffff880836c1bc48 [ 459.998129] RBP: ffff88083b3bfa00 R08: 0000000000000002 R09: 0000000000000000 [ 459.998129] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880836c1bc48 [ 459.998129] R13: ffff880836c1bc20 R14: ffff880836c1bc48 R15: ffff880836d1ec38 [ 459.998129] FS: 0000000000000000(0000) GS:ffff88083ccc3770(0000) knlGS:0000000000000000 [ 459.998129] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 459.998129] CR2: 00007f1562f1d558 CR3: 0000000838090000 CR4: 00000000000006e0 [ 459.998129] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 459.998129] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 459.998129] Process events/4 (pid: 56, threadinfo ffff88083b3be000, task ffff88083b3b3e40) [ 459.998129] Stack: [ 459.998129] ffff880836c1bc80 ffff880836c1bc48 ffffffff80793320 ffff88083b0d0960 [ 459.998129] ffff88083b3bfa30 ffffffff803a788a ffff880836c1bc80 ffffffff803a77f0 [ 459.998129] ffff880836c1bc20 ffff880836d1ec38 ffff88083b3bfa50 ffffffff803a8ce7 [ 459.998129] Call Trace: [ 459.998129] [<ffffffff803a788a>] kobject_release+0x9a/0x290 [ 459.998129] [<ffffffff803a77f0>] ? kobject_release+0x0/0x290 [ 459.998129] [<ffffffff803a8ce7>] kref_put+0x37/0x80 [ 459.998129] [<ffffffff803a76f7>] kobject_put+0x27/0x60 [ 459.998129] [<ffffffff803bebcc>] ? pci_destroy_slot+0x3c/0xc0 [ 459.998129] [<ffffffff803bebd5>] pci_destroy_slot+0x45/0xc0 [ 459.998129] [<ffffffff803c797d>] pci_hp_deregister+0x13d/0x210 [ 459.998129] [<ffffffffa031141d>] cleanup_slots+0x2d/0x80 [pciehp] [ 459.998129] [<ffffffffa0311735>] pciehp_remove+0x15/0x30 [pciehp] [ 459.998129] [<ffffffff803c4c99>] pcie_port_remove_service+0x69/0x90 [ 459.998129] [<ffffffff80441da9>] __device_release_driver+0x59/0x90 [ 459.998129] [<ffffffff80441edb>] device_release_driver+0x2b/0x40 [ 459.998129] [<ffffffff804419d6>] bus_remove_device+0xa6/0x120 [ 459.998129] [<ffffffff8043e46b>] device_del+0x12b/0x190 [ 459.998129] [<ffffffff803c4d90>] ? remove_iter+0x0/0x40 [ 459.998129] [<ffffffff8043e4f6>] device_unregister+0x26/0x70 [ 459.998129] [<ffffffff803c4dbf>] remove_iter+0x2f/0x40 [ 459.998129] [<ffffffff8043ddf3>] device_for_each_child+0x33/0x60 [ 459.998129] [<ffffffff8033ee30>] ? sysfs_schedule_callback_work+0x0/0x50 [ 459.998129] [<ffffffff803c4d30>] pcie_port_device_remove+0x30/0x80 [ 459.998129] [<ffffffff803c55a1>] pcie_portdrv_remove+0x11/0x20 [ 459.998129] [<ffffffff803bfeb2>] pci_device_remove+0x32/0x70 [ 459.998129] [<ffffffff80441da9>] __device_release_driver+0x59/0x90 [ 459.998129] [<ffffffff80441edb>] device_release_driver+0x2b/0x40 [ 459.998129] [<ffffffff804419d6>] bus_remove_device+0xa6/0x120 [ 459.998129] [<ffffffff8043e46b>] device_del+0x12b/0x190 [ 459.998129] [<ffffffff8043e4f6>] device_unregister+0x26/0x70 [ 459.998129] [<ffffffff803ba969>] pci_stop_dev+0x49/0x60 [ 459.998129] [<ffffffff803baab0>] pci_remove_bus_device+0x40/0xc0 [ 459.998129] [<ffffffff803c10d9>] remove_callback+0x29/0x40 [ 459.998129] [<ffffffff8033ee4f>] sysfs_schedule_callback_work+0x1f/0x50 [ 459.998129] [<ffffffff8025769a>] run_workqueue+0x15a/0x230 [ 459.998129] [<ffffffff80257648>] ? run_workqueue+0x108/0x230 [ 459.998129] [<ffffffff8025846f>] worker_thread+0x9f/0x100 [ 459.998129] [<ffffffff8025bce0>] ? autoremove_wake_function+0x0/0x40 [ 459.998129] [<ffffffff802583d0>] ? worker_thread+0x0/0x100 [ 459.998129] [<ffffffff8025b89d>] kthread+0x4d/0x80 [ 459.998129] [<ffffffff8020d4ba>] child_rip+0xa/0x20 [ 459.998129] [<ffffffff8020cebc>] ? restore_args+0x0/0x30 [ 459.998129] [<ffffffff8025b850>] ? kthread+0x0/0x80 [ 459.998129] [<ffffffff8020d4b0>] ? child_rip+0x0/0x20 [ 459.998129] Code: 56 49 89 fe 41 55 4c 8d 6f d8 41 54 53 74 09 f6 05 b8 05 c7 00 08 75 72 49 8b 45 00 48 8b 48 28 eb 05 66 90 48 89 f1 49 8b 45 00 <48> 8b 31 48 83 c0 28 0f 18 0e 48 39 c1 74 1c 8b 41 38 41 0f b6 [ 459.998129] RIP [<ffffffff803bf047>] pci_slot_release+0x37/0x100 [ 459.998129] RSP <ffff88083b3bf9e0> [ 460.018595] ---[ end trace 5a08d2095374aedc ]--- The pci_remove_bus_device() removes all buses and devices under the bridge, and then removes the bridge. So the remove() callback of the hotplug drivers implemented as a bridge's driver is executed after the struct pci_bus of the bridge's secondary bus is removed. The remove() callback of those driver unregisters the slot using pci_destroy_slot(), and slot's release callback refers to the the struct pci_bus that was already freed. This is the cause of the kernel oops. This patch solves the problem by stopping bus drivers before removing the bridge and its child bus and devices. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: check if a bus is added when removing itYu Zhao2009-03-19
| | | | | | | | | When removing a bus, 'is_added' should be checked to make sure the bus has been successfully added by pci_bus_add_child() who will sets 'is_added'. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix sparse warning in pci_remove_behind_bridgeStephen Hemminger2008-10-20
| | | | | | | | Get rid of the second definition of dev which hides the earlier one in the argument list and causes a warning from sparse. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: make CPU list affinity visibleMike Travis2008-10-20
| | | | | | | | | | | | | Stephen Hemminger wrote: > Looks like Mike created cpulistaffinty in sysfs but never completed > the job. This patch hooks things up correctly, taking care to remove the new file when the bus is destroyed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add PCI Express ASPM supportShaohua Li2008-04-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: remove global list of PCI devicesGreg Kroah-Hartman2008-04-21
| | | | | | | | | This patch finally removes the global list of PCI devices. We are relying entirely on the list held in the driver core now, and do not need a separate "shadow" list as no one uses it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: add is_added flag to struct pci_devGreg Kroah-Hartman2008-04-21
| | | | | | | | | | This lets us check if the device is really added to the driver core or not, which is what we need when walking some of the bus lists. The flag is there in anticipation of getting rid of the other PCI device list, which is what we used to check in this situation. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman2008-02-02
| | | | | | | | | | | This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: make pci_bus a struct deviceGreg Kroah-Hartman2008-02-01
| | | | | | | | | | | | | | This moves the pci_bus class device to be a real struct device and at the same time, place it in the device tree in the correct location. Note, the old "bridge" symlink is now gone, but this was a non-standard link and no userspace program used it. If you need to determine the device that the bus is on, follow the standard device symlink, or walk up the device tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: PCIE ASPM supportShaohua Li2008-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: add pci_stop_bus_deviceSatoru Takeuchi2006-09-26
| | | | | | | | | | | | | | This patch adds pci_stop_bus_device() which stops a PCI device (detach the driver, remove from the global list and so on) and any children. This is needed for ACPI based PCI-to-PCI bridge hot-remove, and it will be also needed for ACPI based PCI root bridge hot-remove. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: fix race with pci_walk_bus and pci_destroy_devZhang Yanmin2006-06-21
| | | | | | | | | | | | | pci_walk_bus has a race with pci_destroy_dev. When cb is called in pci_walk_bus, pci_destroy_dev might unlink the dev pointed by next. Later on in the next loop, pointer next becomes NULL and cause kernel panic. Below patch against 2.6.17-rc4 fixes it by changing pci_bus_lock (spin_lock) to pci_bus_sem (rw_semaphore). Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: drivers/pci: some cleanupsAdrian Bunk2006-01-09
| | | | | | | | | | | | | | This patch contains the following cleanups: - hotplug/pciehp_core.c: make the needlessly global hpdriver_context static - #if 0 the following unused functions: - pci.c: pci_bus_max_busnr() - pci.c: pci_max_busnr() - proc.c: pci_proc_attach_bus() - remove.c: pci_remove_device_safe Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpi bridge hotadd: Make the PCI remove routines safe for failed ↵Rajesh Shah2005-06-28
| | | | | | | | | | | | | | hot-plug When a root bridge hierarchy is hot-plugged, resource requirements for the new devices may be greater than what the root bridge is decoding. In this case, we want to remove devices that did not get needed resources. These devices have been scanned into bus specific lists but not yet added to the global device list. Make sure the pci remove functions can handle this case. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-01 07:44:45 -0500