aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug
Commit message (Collapse)AuthorAge
...
| * | | PCI Hotplug: cpqphp: don't use pci_find_slot()Alex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert uses of pci_find_slot to modern API. In the conversion sites, we end up calling pci_dev_put() right away. This may seem like it misses the entire point of doing something like pci_get_bus_and_slot(), since we drop the reference so soon, but it turns out we don't actually do much with the returned pci_dev. I plan on untangling cpqphp further, but clearly cpqphp never worried too much about a properly refcounted pci_dev anyway. For now, this conversion seems reasonable, as it gets rid of the last in-tree caller of pci_find_slot. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: constify slot_name()Alex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eliminate this warning: warning: return discards qualifiers from pointer target type Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: eliminate dead code - PCI_ScanBusNonBridgeAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have no clue what the original intent here was, but the code as written is useless. The old dbg() statement above the old callsite might lead one to think that at one point, there was supposed to be some recursion, but any sense of sanity here has been lost to the ravages of time. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: clean up accesses to pcibios_get_irq_routing_table()Alex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of making multiple calls to pcibios_get_irq_routing_table, let's just do it once and save the answer. The reason we were making multiple calls is because we liked to calculate its length and perform some loop over it. Instead of open-coding the length calculation every time, provide it in an inline helper function. Finally, since pci_print_IRQ_route() is used only for debug, let's only do it when cpqhp_debug is set. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: refactor cpqhp_save_configAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handle an empty slot at the top of the loop, and continue early. This allows us to un-indent the rest of the function by one level. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: style cleanupsAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up style, whitespace in cpqphp_pci.c Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: refactor cpqphp_save_slot_configAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for an empty slot, and return early if so. This allows us to un-indent the rest of the function by one level. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: clean up cpqphp_ctrl.cAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Style and whitespace cleanups, no functional change. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: refactor cpqhp_probeAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apply DeMorgan's theorem: if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) turns into if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) Now we can bail out early from the function if the controller is not supported. This allows us to un-indent the remainder of the function quite a bit and make it much more readable. Fix up some extra braces, and un-indent the 'case' labels in the switch statement as per CodingStyle. No functional change. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: eliminate stray bracesAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up style and eliminate superfluous braces and parens. No functional change. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: remove useless prototypes in cpqphp_core.cAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: refactor Refactor code to follow convention more closely and eliminate the need for some useless prototypes. No functional change. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: obey 80 column convention in cpqphp.hAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up cpqphp.h to follow 80 column convention. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: fix comment styleAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix up comments from C++ to C-style, wrapping if necessary, etc. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI Hotplug: cpqphp: stray whitespace cleanupsAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up all stray whitespace issues, such as trailing whitespace, spaces before tabs, etc. and whatever else vim's c_space_errors highlights in red. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI: ibmphp_core.c: fix warning due to missing module_exit()akpm@linux-foundation.org2009-06-11
| |/ / | | | | | | | | | | | | | | | | | | | | | drivers/pci/hotplug/ibmphp_core.c:1414: warning: `ibmphp_exit' defined but not used Signed-off-by: Zhenwen Xu <helight.xu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | trivial: pci hotplug: adding __init/__exit macros to sgi_hotplugPeter Huewe2009-06-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions from drivers/pci/hotplug/sgi_hotplug.c linux version 2.6.30-rc8 Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge branch 'linus' into irq/numaIngo Molnar2009-06-01
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/mips/sibyte/bcm1480/irq.c arch/mips/sibyte/sb1250/irq.c Merge reason: we gathered a few conflicts plus update to latest upstream fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_funcAlex Chiang2009-05-27
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [<a000000100016390>] show_stack+0x50/0xa0 [<a000000100016c60>] show_regs+0x820/0x860 [<a00000010003b390>] die+0x190/0x2a0 [<a000000100066a40>] ia64_do_page_fault+0x8e0/0xa40 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270 [<a0000001003b2660>] pci_remove_bus_device+0x120/0x260 [<a0000002060549f0>] acpiphp_disable_slot+0x410/0x540 [acpiphp] [<a0000002060505c0>] disable_slot+0xc0/0x120 [acpiphp] [<a0000002040d21c0>] power_write_file+0x1e0/0x2a0 [pci_hotplug] [<a0000001003bb820>] pci_slot_attr_store+0x60/0xa0 [<a000000100240f70>] sysfs_write_file+0x230/0x2c0 [<a000000100195750>] vfs_write+0x190/0x2e0 [<a0000001001961a0>] sys_write+0x80/0x100 [<a00000010000c600>] ia64_ret_from_syscall+0x0/0x20 [<a000000000010720>] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | x86, apic: introduce io_apic_irq_attrYinghai Lu2009-05-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fixCyrill Gorcunov2009-05-12
| | | | | | | | | | | | | | | | | | | | | | | | Fix trivial typo in the drivers/pci/hotplug/ibmphp_core.c changes. [ Impact: build fix ] Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Yinghai Lu <yinghai@kernel.org> Cc: eswierk@aristanetworks.com LKML-Reference: <20090512145128.GA10220@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()Yinghai Lu2009-05-11
|/ | | | | | | | | | | | | To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing(). [ Impact: extend function call API to prepare for new functionality ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A01C406.2040303@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* PCI Hotplug: acpiphp: grab refcount on p2p subordinate busAlex Chiang2009-04-06
| | | | | | | | | | | | | | | | | If a logical hot unplug (remove) is performed on a bridge claimed by acpiphp and then acpiphp is unloaded, we will encounter an oops. This is because acpiphp will access the bridge's subordinate bus, which was released by the user's prior hot unplug. The solution is to grab a reference on the subordinate PCI bus. This will prevent the bus from release until acpiphp is unloaded. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: update fakephp for bus_id removalStephen Rothwell2009-03-26
| | | | | | | Get rid of a new use of bus_id that snuck in. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: rename legacy_fakephp to fakephpAlex Chiang2009-03-20
| | | | | | | | | We wanted to replace fakephp wholesale, so rename legacy_fakephp back to fakephp. Yes, this is a silly commit, but it produces a much easier patch to read and review. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: restore fakephp interface with complete reimplementationTrent Piepho2009-03-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A complete re-implementation of fakephp is necessary if it is to present its former interface (pre-2.6.27, when it broke). The reason is that PCI hotplug drivers call pci_hp_register(), which enforces the rule that only one /sys/bus/pci/slots/ file may be created per physical slot. The change breaks the old fakephp's assumption that it could create a file per function. So we re-implement fakephp to avoid using the standard PCI hotplug API so that we can restore the old fakephp user interface. It puts entries in /sys/bus/pci/slots with the names of all PCI devices/functions, exactly symmetrical to what is shown in /sys/bus/pci/devices. Each slots/ entry has a "power" attribute, which works the same way as the fakephp driver's power attribute has worked. There are a few improvements over old fakephp, which couldn't handle PCI devices being added or removed via a means outside of fakephp's knowledge. If a device was added another way, old fakephp didn't notice and didn't create the fake slot for it. If a device was removed another way, old fakephp didn't delete the fake slot for it (and accessing the stale slot caused an oops). The new implementation overcomes these limitations. As a consequence, removing a bridge with other devices behind it now works as well, which is something else old fakephp couldn't do previously. This duplicates a tiny bit of the code in the PCI core that does this same function. Re-using that code ends up being more complex than duplicating it, and it makes code in the PCI core more ugly just to support this legacy fakephp interface compatibility layer. Reviewed-by: James Cameron <qz@hp.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Introduce pci_rescan_bus()Alex Chiang2009-03-20
| | | | | | | | | | | | This API is used by the PCI core to rescan a bus and rediscover newly added devices. Over time, it is expected that the various PCI hotplug drivers will migrate to this interface and away from the old pci_do_scan_bus() interface. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: fix wrong assumption in acpi_get_hp_hw_control_from_firmwareKenji Kaneshige2009-03-20
| | | | | | | | | | | Current acpi_get_hp_hw_control_from_firmware() has a assumption that pci_bus->self is NULL on a PCI root bus. But it might not be true on some platforms. Because of this wrong assumption, current acpi_get_hp_hw_control_from_firmware() might cause endless loop. We must check pci_bus->parent instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: fix wrong assumption in acpi_get_hp_params_from_firmwareKenji Kaneshige2009-03-20
| | | | | | | | | | | Current acpi_get_hp_params_from_firmware() has a assumption that pci_bus->self is NULL on the root pci bus. But it might not true on some platforms. Because of this wrong assumption, current acpi_get_hp_params_from_firmware() might cause endless loop. We must check pci_bus->parent instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe portdrv: Implement pm objectRafael J. Wysocki2009-03-20
| | | | | | | | Implement pm object for the PCI Express port driver in order to use the new power management framework and reduce the code size. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: shpchp: fix bus number check to avoid false positiveRoel Kluin2009-03-19
| | | | | | | | | With for (busnr = 0; busnr <= end; busnr++) { ... } busnr reaches end + 1 after the loop. So fix the "no busses available" check to look for just busnr > end rather than >=. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/ACPI: rename pci_osc_control_set()Kenji Kaneshige2009-03-19
| | | | | | | | | | | | | - Rename pci_osc_control_set() to acpi_pci_osc_control_set() according to the other API names in drivers/acpi/pci_root.c. - Move _OSC related definitions to include/linux/acpi.h because _OSC related API is implemented in drivers/acpi/pci_root.c now. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: make cmd_busy flag one bitKenji Kaneshige2009-03-19
| | | | | | | | The cmd_busy field in struct controller takes only two values 0 or 1. So it should be one bit. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: enable software notification on empty slotsKenji Kaneshige2009-03-19
| | | | | | | | | | | | | | | | | | | | | | | | Current pciehp disables software notification of adapter presence changed event and MRL changed event when slot is turned off. Because of this, there is no way to detect those events on empty slots in the current pciehp implementation. According to the past discussion(*), this behavior was introduced to prevent endless loop that could happen if pcie_isr() runs after power fault is detected on a certain platform whose stickey power-fault bit remains on till the slot is powered on again. (*) http://sourceforge.net/mailarchive/message.php?msg_id=20051130135409.A14918%40unix-os.sc.intel.com I think this endless loop can be avoided using one bit flag that indicates power fault had been detected, instead of disabling software notification of adapter present changed event and MRL changed event. With this patch, we can enable software notification mechanism of presence changed and MRL changed event on the empty slots again. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: fix possible endless loop in pcie_isrKenji Kaneshige2009-03-19
| | | | | | | | | | | | | | Fix possible endless loop in pcie_isr. Currently, pcie_isr() (interrupt service routine of pciehp) can end up in an endless loop if the Slot Status register is set again immediately after being cleared. According to the past discussion (see below URL) this case can happen if the power fault detected bit is set during handling. http://sourceforge.net/mailarchive/message.php?msg_id=20051130135409.A14918%40unix-os.sc.intel.com Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: introduce missing kfreeJulia Lawall2009-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error handling code following a kmalloc should free the allocated data. Since the subsequent code that could provoke an error does not use the allocated data, the allocation is just moved below it. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add missing KERN_* constants to printksFrank Seidel2009-03-19
| | | | | | | | | | | According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing pieces here for the pci subsystem. Signed-off-by: Frank Seidel <frank@f-seidel.de> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-03-19
| | | | | | | | More dev_set_name conversion. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe portdrv: Remove struct pcie_port_service_idRafael J. Wysocki2009-03-19
| | | | | | | | | | | | | | | | | | The PCI Express port driver uses 'struct pcie_port_service_id' for matching port service devices and drivers, but this structure contains fields that duplicate information from the port device itself (vendor, device, subvendor, subdevice) and fields that are not used by any existing port service driver (class, class_mask, drvier_data). Also, both existing port service drivers (AER and PCIe HP) don't even use the vendor and device fields for device matching. Therefore 'struct pcie_port_service_id' can be removed altogether and the only useful members of it (port_type, service) can be introduced directly into the port service device and port service driver structures. That simplifies the code quite a bit and reduces its size. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe portdrv: Simplily probe callback of service driversRafael J. Wysocki2009-03-19
| | | | | | | | | The second argument of the ->probe() callback in struct pcie_port_service_driver is unnecessary and never used. Remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* powerpc/pseries: The RPA PCI hotplug driver depends on EEHMichael Ellerman2009-03-12
| | | | | | | | The RPA PCI hotplug driver calls EEH routines, so should depend on EEH. Also PPC_PSERIES implies PPC64, so remove that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
* PCI: pciehp: Handle interrupts that happen during initialization.Eric W. Biederman2009-02-24
| | | | | | | | | | | Move the enabling of interrupts after all of the data structures are setup so that we can safely run the interrupt handler as soon as it is registered. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
* PCI hotplug: Change link order of pciehp & acpiphpMatthew Garrett2009-01-27
| | | | | | | | | | | | | | | | Some hardware exposes PCIE slots in such a way that they can be claimed by either the acpiphp or pciehp driver. pciehp is the preferred driver if the firmware allows the OS to claim control via the _OSC method so should be loaded first - if it fails to bind (either due to a missing _OSC method or the firmware refusing to hand off control) then we can fall back to acpiphp or a vendor-specific driver. This patch simply changes the link order to ensure that pciehp will be initialised before acpiphp if both are statically built into the kernel. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: fakephp: Allocate PCI resources before adding the deviceDarrick J. Wong2009-01-27
| | | | | | | | | | | | | | | For PCI devices, pci_bus_assign_resources() must be called to set up the pci_device->resource array before pci_bus_add_devices() can be called, else attempts to load drivers results in BAR collision errors where there are none. This is not done in fakephp, so devices can be "unplugged" but scanning the parent bus won't bring the devices back due to resource unallocation. Move the pci_bus_add_device-calling logic into pci_rescan_bus and preface it with a call to pci_bus_assign_resources so that we only have to (re)allocate resources once per bus where a new device is found. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-01-26
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: fix lock imbalance in pciehp PCI PM: Restore standard config registers of all devices early PCI/MSI: bugfix/utilize for msi_capability_init()
| * PCI hotplug: fix lock imbalance in pciehpJiri Slaby2009-01-19
| | | | | | | | | | | | | | | | | | | | | | | | set_lock_status omits mutex_unlock in fail path. Add the omitted unlock. As a result a lockup caused by this can be triggered from userspace by writing 1 to /sys/bus/pci/slots/.../lock often enough. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | ACPI PCI hotplug: harden against panic regressionJames Bottomley2009-01-16
|/ | | | | | | | | | | | | | | | ACPI hotplug panic with current git head http://lkml.org/lkml/2009/1/10/136 Rather than reverting the entire commit that causes the crash: e8c331e963c58b83db24b7d0e39e8c07f687dbc6 "PCI hotplug: introduce functions for ACPI slot detection" simply harden against it while the changes to the hotplug code on this particularl machine are understood. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'linus' into releaseLen Brown2009-01-09
|\
| * PCI hotplug: remove redundant test in cpq hotplugJulia Lawall2009-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | func is checked not to be NULL a few lines before. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: pciehp: cleanup register and field definitionsKenji Kaneshige2009-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | Clean up register definitions related to PCI Express Hot plug. - Add register definitions into include/linux/pci_regs.h, and use them instead of pciehp's locally definied register definitions. - Remove pciehp's locally defined register definitions - Remove unused register definitions in pciehp. - Some minor cleanups. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: pciehp: ignore undefined bit in link status registerKenji Kaneshige2009-01-07
| | | | | | | | | | | | | | | | | | | | Bit 10 in Link Status register used to be defined as Training Error in the PCI Express 1.0a specification. But it was removed by Training Error ECN and is no longer defined. So pciehp must ignore the value read from it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-24 04:18:28 -0400