aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug
Commit message (Collapse)AuthorAge
* [PATCH] fix more missing includesTim Schmielau2006-01-08
| | | | | | | | | | Include fixes for 2.6.14-git11. Should allow to remove sched.h from module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more to come since I haven't yet checked the other archs. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI Express Hotplug: clear sticky power-fault bitRajesh Shah2005-11-24
| | | | | | | | | | | | | Per the PCI Express spec, the power-fault-detected bit in the slot status register can be set anytime hardware detects a power fault, regardless of whether the slot has a device populated in it or not. This bit is sticky and must be explicitly cleared. This patch is needed to allow hot-add after such a power fault has been detected. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] shpchp_hpc build fixAndrew Morton2005-11-13
| | | | | | | | Missing include. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pciehp_hpc build fixAndrew Morton2005-11-13
| | | | | | | | | | | | | | | | | | | | | | drivers/pci/hotplug/pciehp_hpc.c:221: parse error before "pcie_isr" drivers/pci/hotplug/pciehp_hpc.c:221: warning: type defaults to `int' in declaration of `pcie_isr' drivers/pci/hotplug/pciehp_hpc.c:221: warning: data definition has no type or storage class drivers/pci/hotplug/pciehp_hpc.c: In function `hpc_release_ctlr': drivers/pci/hotplug/pciehp_hpc.c:715: implicit declaration of function `free_irq' drivers/pci/hotplug/pciehp_hpc.c: At top level: drivers/pci/hotplug/pciehp_hpc.c:839: parse error before "pcie_isr" drivers/pci/hotplug/pciehp_hpc.c:840: warning: return type defaults to `int' drivers/pci/hotplug/pciehp_hpc.c: In function `pcie_isr': drivers/pci/hotplug/pciehp_hpc.c:850: `IRQ_NONE' undeclared (first use in this function) drivers/pci/hotplug/pciehp_hpc.c:850: (Each undeclared identifier is reported only once drivers/pci/hotplug/pciehp_hpc.c:850: for each function it appears in.) drivers/pci/hotplug/pciehp_hpc.c:979: `IRQ_HANDLED' undeclared (first use in this function) drivers/pci/hotplug/pciehp_hpc.c: In function `pcie_init': drivers/pci/hotplug/pciehp_hpc.c:1362: implicit declaration of function `request_irq' Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] rpaphp_pci build fixakpm@osdl.org2005-11-13
| | | | | | | | (akpm: _machine is some ppc64 thing - this is a powerpc-only driver) Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI: fix namespace clashesRajesh Shah2005-11-10
| | | | | Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: drivers/pci/: small cleanupsAdrian Bunk2005-11-10
| | | | | | | | | | | This patch contains the following cleanups: - access.c should #include "pci.h" for getting the prototypes of it's global functions - hotplug/shpchp_pci.c: make the needlessly global function program_fw_provided_values() static Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] dlpar regression for ppc64 - probe changeJohn Rose2005-11-10
| | | | | | | | | This patch contains the driver bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe. This functionality was regressed when the new PCI approach was introduced. Please apply if appropriate. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pciehp: fix handling of power faults during hotplugrajesh.shah@intel.com2005-11-10
| | | | | | | | | | The current pciehp implementation reports a power-fail error even if the condition has cleared by the time the corresponding interrupt handling code gets a chance to run. This patch fixes this problem. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pciehp: clean-up how we request control of hotplug hardwarerajesh.shah@intel.com2005-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch further tweaks how we request control of hotplug controller hardware from BIOS. We first search the ACPI namespace corresponding to a specific hotplug controller looking for an _OSC or OSHP method. On failure, we successively move to the ACPI parent object, till we hit the highest level host bridge in the hierarchy. This allows for different types of BIOS's which place the _OSC/OSHP methods at various places in the acpi namespace, while still not encroaching on the namespace of some other root level host bridge. This patch also introduces a new load time option (pciehp_force) that allows us to bypass all _OSC/OSHP checking. Not supporting these methods seems to be be the most common ACPI firmware problem we've run into. This will still _not_ allow the pciehp driver to work correctly if the BIOS really doesn't support pciehp (i.e. if it doesn't generate a hotplug interrupt). Use this option with caution. Some BIOS's may deliberately not build any _OSC/OSHP methods to make sure it retains control the hotplug hardware. Using the pciehp_force parameter for such systems can lead to two separate entities trying to control the same hardware. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pciehp: request control of each hotplug controller individuallyrajesh.shah@intel.com2005-11-10
| | | | | | | | | | | | | This patch tweaks the way pciehp requests control of the hotplug hardware from BIOS. It now tries to invoke the ACPI _OSC method for a specific hotplug controller only, rather than walking the entire acpi namespace invoking all possible _OSC methods under all host bridges. This allows us to gain control of each hotplug controller individually, even if BIOS fails to give us control of some other hotplug controller in the system. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pciehp: reduce debug message verbosityrajesh.shah@intel.com2005-11-10
| | | | | | | | | | Reduce the number of debug messages generated if pciehp debug is enabled. I tried to restrict this to removing debug messages that are either early-driver-debug type messages, or print information that can be inferred through other debug prints. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pciehp: miscellaneous cleanupsrajesh.shah@intel.com2005-11-10
| | | | | | | | Remove un-necessary header includes, remove dead code, remove some hardcoded constants... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pciehp: remove redundant data structuresrajesh.shah@intel.com2005-11-10
| | | | | | | | | | | | | State information is currently stored in per-slot as well as per-pci-function data structures in pciehp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pciehp: reduce dependence on ACPIrajesh.shah@intel.com2005-11-10
| | | | | | | | | | | | | | | | | | | Reduce the PCI Express hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. We go to ACPI only to run the _OSC or _OSHP methods to transition control of hotplug hardware from system BIOS to the hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that pciehp does not automatically enable the hot-added device or its DMA bus mastering capability now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] patch 1/8] pciehp: use the PCI core for hotplug resource managementrajesh.shah@intel.com2005-11-10
| | | | | | | | | | This patch converts the pci express hotplug controller driver to use the PCI core for resource management. This eliminates a lot of duplicated code and integrates pciehp with the system's normal PCI handling code. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] ppc64: bugfix: crash on PHB addLinas Vepstas2005-11-10
| | | | | | | | | | | | | | | 19-rpaphp-crashing.patch This patch fixes a bug related to dlpar PHB add, after a PHB removal. -- The crash was due to the PHB not having a pci_dn structure yet, when the phb is being added. This code survived testing, of adding and removeig the PHB and all slots underneath it, 17 times so far, as of this writing. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] kfree cleanup: misc remaining driversJesper Juhl2005-11-07
| | | | | | | | | | | | | | | | | | This is the remaining misc drivers/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in misc files in drivers/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <len.brown@intel.com> Acked-by: "Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix remaining missing includesTim Schmielau2005-11-07
| | | | | | | | | | Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix missing includesTim Schmielau2005-10-30
| | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Typo fix: dot after newline in printk stringsJean Delvare2005-10-30
| | | | | | | | Typo fix: dots appearing after a newline in printk strings. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] CONFIG_IA32Brian Gerst2005-10-30
| | | | | | | | | | | | | Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] acpiphp: allocate resources for adapters with bridgesKristen Accardi2005-10-28
| | | | | | | Allocate resources for adapters with bridges on them. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: fix oops at driver unloadrajesh.shah@intel.com2005-10-28
| | | | | | | | | At unload time, the shpchp driver does not remove sysfs files it had created in the driver's probe entry point. This patch fixes this problem. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: reduce debug message verbosityrajesh.shah@intel.com2005-10-28
| | | | | | | | | | Reduce the number of debug messages generated if shpchp debug is enabled. I tried to restrict this to removing debug messages that are either early-driver-debug type messages, or print information that can be inferred through other debug prints. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: miscellaneous cleanupsrajesh.shah@intel.com2005-10-28
| | | | | | | | | Remove un-necessary header includes, remove dead code, remove some type casts, receive function return in the correct data type... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: remove redundant data structuresrajesh.shah@intel.com2005-10-28
| | | | | | | | | | | | | State information is currently stored in per-slot as well as per-pci-function data structures in shpchp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: dont save PCI config for hotplug slots/devicesrajesh.shah@intel.com2005-10-28
| | | | | | | | | This patch eliminates saving the PCI config header for devices in hotplug capable slots. We now use the PCI core to get the specific parts of the config header as required. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: detect SHPC capability before doing a lot of workrajesh.shah@intel.com2005-10-28
| | | | | | | | | | | | | The shpc driver registers its probe function for all pci-pci bridges in the system. Not all of them will be shpc capable, so look for this capability early in the probe function and return if there's no work to do on this bridge. The old shpc driver did some initialization work on all bridges before detecting that shpc is not supported and unwinds the work it's already done in that case. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: reduce dependence on ACPIrajesh.shah@intel.com2005-10-28
| | | | | | | | | | | | | | | | | | | Reduce the SHPC hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. The remaining interaction with ACPI is to run the _OSHP method to transition control of hotplug hardware from system BIOS to the shpc hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that shpchp does not enable the hot-added device or its DMA bus mastering automatically now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: remove redundant display of PCI device resourcesrajesh.shah@intel.com2005-10-28
| | | | | | | | | Info about resources assigned to PCI devices is already available through sysfs and pci utilities. There's no need for shpchp to create another sysfs file to display the same information. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] shpchp: use the PCI core for hotplug resource managementrajesh.shah@intel.com2005-10-28
| | | | | | | | | | This patch converts the standard hotplug controller driver to use the PCI core for resource management. This eliminates a whole lot of duplicated code, and integrates shpchp in the system's normal PCI handling code. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] ppc64 PCI Hotplug: cleanup unsymmetric API routineslinas2005-10-28
| | | | | | | | | | | | | | | | | This is a minor patch to the ppc64 PCI hotplug code; it makes the call to rpaphp_unconfig_pci_adapter() symmetric with respect to the call to rpaphp_config_pci_adapter(). I discussed this with John Rose, who had provided the last round of changes for these functions; he appearently had this patch but somehow failed to mail it out. Tested. (added/removed device). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> drivers/pci/hotplug/rpaphp.h | 3 ++- drivers/pci/hotplug/rpaphp_core.c | 5 ++++- drivers/pci/hotplug/rpaphp_pci.c | 11 +++-------- 3 files changed, 9 insertions(+), 10 deletions(-)
* [PATCH] cpqphp: add pci_enable_device()Bjorn Helgaas2005-10-28
| | | | | | | | | | | | | | | Add pci_{enable,disable}_device() calls. Without pci_enable_device(), dev->irq is garbage, and cpqphp relies on it. This fixes a problem reported by Bruno Redondi. He reported a flood of ACPI interrupts, that caused kacpid to run 100% of the time: http://bugzilla.kernel.org/show_bug.cgi?id=5312 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/pci/hotplug/cpqphp_core.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-)
* [PATCH] cpcihp_zt5550: add pci_enable_device()Bjorn Helgaas2005-10-28
| | | | | | | | | | | | | | Add pci_{enable,disable}_device() calls. Without pci_enable_device(), dev->irq is garbage, and cpcihp_zt5550 relies on it. Compiled but untested, since I don't have the hardware. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/pci/hotplug/cpcihp_zt5550.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-)
* [PATCH] PCI Hotplug: Fix buffer overrun in rpadlpar_sysfs.cLinda Xie2005-09-22
| | | | | | Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI: convert kcalloc to kzallocPekka Enberg2005-09-22
| | | | | | | | | This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] shpchp: Use dword accessors for PCI_ROM_ADDRESSAdam Kropelin2005-09-17
| | | | | | | | | | | | | | PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Cc: <kristen.c.accardi@intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pciehp: Use dword accessors for PCI_ROM_ADDRESSAdam Kropelin2005-09-17
| | | | | | | | | | | | | | PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Cc: <kristen.c.accardi@intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ibmphp: Use dword accessors for PCI_ROM_ADDRESSAdam Kropelin2005-09-17
| | | | | | | | | | | | | PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 Linus Torvalds2005-09-09
|\
| * [PATCH] PCI: Fix PCI bus mastering enable problem in pciehpRajesh Shah2005-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Martin Franc reported that the pciehp driver was not enabling bus master capability on his hot-plugged card. pciehprm_enable_card() was updating the PCI command register only if _HPP indicated a value for SERR or PERR that was different from the current setting. I don't have hardware that reproduces this problem, but Martin reports that this patch fixes the problem for him. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> From rzarev@its.caltech.edu Tue Sep 6 18:29:50 2005 Date: Tue, 6 Sep 2005 13:39:32 -0700 (PDT) From: Rumen Ivanov Zarev <rzarev@its.caltech.edu> Message-Id: <200509062039.j86KdWMr014934@inky.its.caltech.edu> To: gregkh@suse.de Subject: PCI: Unhide SMBus on Compaq Evo N620c Cc: linux-kernel@vger.kernel.org Trivial patch against 2.6.13 to unhide SMBus on Compaq Evo N620c laptop using Intel 82855PM chipset. Signed-off-by: Rumen Zarev <rzarev@caltech.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- drivers/pci/quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) --- gregkh-2.6.orig/drivers/pci/quirks.c 2005-09-09 10:28:55.000000000 -0700 +++ gregkh-2.6/drivers/pci/quirks.c 2005-09-09 13:51:44.000000000 -0700 @@ -876,6 +876,12 @@ static void __init asus_hides_smbus_host case 0xC00C: /* Samsung P35 notebook */ asus_hides_smbus = 1; } + } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { + if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch(dev->subsystem_device) { + case 0x0058: /* Compaq Evo N620c */ + asus_hides_smbus = 1; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge );
* | [PATCH] Separate pci bits out of struct device_nodePaul Mackerras2005-09-09
|/ | | | | | | | | | | This patch pulls the PCI-related junk out of struct device_node and puts it in a separate structure, struct pci_dn. The device_node now just has a void * pointer in it, which points to a struct pci_dn for nodes that represent PCI devices. It could potentially be used in future for device-specific data for other sorts of devices, such as virtual I/O devices. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] PCI Hotplug: SGI hotplug driver fixesPrarit Bhargava2005-09-08
| | | | | | | | | | These fixes were suggested by pcihpd-discuss, but were dropped in the initial checkin of the code. These fixes include cleaning up the hotplug driver sysfs filename, and some minor code cleanups. The driver also requires at least PROM 4.30, not 4.20. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: use bus_slot number for nameKristen Accardi2005-09-08
| | | | | | | | | | For systems with multiple hotplug controllers, you need to use more than just the slot number to uniquely name the slot. Without a unique slot name, the pci_hp_register() will fail. This patch adds the bus number to the name. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: rpaphp: Purify hotplugJohn Rose2005-09-08
| | | | | | | | | | | | | | | | | | Currently rpaphp registers the following bus types as hotplug slots: 1) Actual PCI Hotplug slots 2) Embedded/Internal PCI slots 3) PCI Host Bridges The second and third bus types are not actually direct parents of removable adapters. As such, the rpaphp has special case code to fake results for attributes like power, adapter status, etc. This patch removes types 2 and 3 from the rpaphp module. This patch also changes the DLPAR module so that slots can be DLPAR-added/removed without having been designated as hotplug-capable. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: rpaphp: Export slot enableJohn Rose2005-09-08
| | | | | | | | | | | This patch exports rpaphp_config_pci_adapter() for use by the rpadlpar module. It also changes this function by removing any dependencies on struct slot. The patch also changes the RPA DLPAR-add path to enable newly-added slots in a separate step from that which registers them as hotplug slots. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: rpaphp: Remove rpaphp_find_pciJohn Rose2005-09-08
| | | | | | | | | The rpaphp module currently uses a fragile method to find a pci device by its device node. This function is unnecessary, so this patch scraps it. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: rpaphp: Change slot pci referenceJohn Rose2005-09-08
| | | | | | | | | | | | | | | | The slot structure in the rpaphp module currently references the PCI contents of the slot using the PCI device of the parent bridge. This is unnecessary, since the module is actually interested in the subordinate bus of the bridge. The dependency on a PCI bridge device also prohibits the module from registering hotplug slots that have a root bridge as a parent, since root bridges on PPC64 don't have PCI devices. This patch changes struct slot to reference the PCI subsystem using a pci_bus rather than a pci_dev. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Hotplug: rpaphp: Move VIO registrationJohn Rose2005-09-08
| | | | | | | | | | | | | | | | Currently, rpaphp registers Virtual I/O slots as hotplug slots. The only purpose of this registration is to ensure that the VIO subsystem is notified of new VIO buses during DLPAR adds. Similarly, rpaphp notifies the VIO subsystem when a VIO bus is DLPAR-removed. The rpaphp module has special case code to fake results for attributes like power, adapter status, etc. The VIO register/unregister functions could just as easily be made from the DLPAR module. This patch moves the VIO registration calls to the DLPAR module, and removes the VIO fluff from rpaphp altogether. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 10:49:23 -0500