aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug
Commit message (Collapse)AuthorAge
* PCI: pciehp: Wait for hotplug command completion where necessaryAlex Williamson2015-07-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a5dd4b4b0570b3bf880d563969b245dfbd170c1e upstream. The commit referenced below deferred waiting for command completion until the start of the next command, allowing hardware to do the latching asynchronously. Unfortunately, being ready to accept a new command is the only indication we have that the previous command is completed. In cases where we need that state change to be enabled, we must still wait for completion. For instance, pciehp_reset_slot() attempts to disable anything that might generate a surprise hotplug on slots that support presence detection. If we don't wait for those settings to latch before the secondary bus reset, we negate any value in attempting to prevent the spurious hotplug. Create a base function with optional wait and helper functions so that pcie_write_cmd() turns back into the "safe" interface which waits before and after issuing a command and add pcie_write_cmd_nowait(), which eliminates the trailing wait for asynchronous completion. The following functions are returned to their previous behavior: pciehp_power_on_slot pciehp_power_off_slot pcie_disable_notification pciehp_reset_slot The rationale is that pciehp_power_on_slot() enables the link and therefore relies on completion of power-on. pciehp_power_off_slot() and pcie_disable_notification() need a wait because data structures may be freed after these calls and continued signaling from the device would be unexpected. And, of course, pciehp_reset_slot() needs to wait for the scenario outlined above. Fixes: 3461a068661c ("PCI: pciehp: Wait for hotplug command completion lazily") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'powerpc-4.1-1' of ↵Linus Torvalds2015-04-16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
| * powerpc/eeh: Do probe on pci_dnGavin Shan2015-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally, EEH core probes on device_node or pci_dev to populate EEH devices and PEs, which conflicts with the fact: SRIOV VFs are usually enabled and created by PF's driver and they don't have the corresponding device_nodes. Instead, SRIOV VFs have dynamically created pci_dn, which can be used for EEH probe. The patch reworks EEH probe for PowerNV and pSeries platforms to do probing based on pci_dn, instead of pci_dev or device_node any more. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | Merge tag 'pci-v4.1-changes' of ↵Linus Torvalds2015-04-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
| * | PCI: Assign resources before drivers claim devices (pci_scan_bus())Yijing Wang2015-03-12
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, pci_scan_bus() created a root PCI bus, enumerated the devices on it, and called pci_bus_add_devices(), which made the devices available for drivers to claim them. Most callers assigned resources to devices after pci_scan_bus() returns, which may be after drivers have claimed the devices. This is incorrect; the PCI core should not change device resources while a driver is managing the device. Remove pci_bus_add_devices() from pci_scan_bus() and do it after any resource assignment in the callers. [bhelgaas: changelog, check for failure in mcf_pci_init()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: "David S. Miller" <davem@davemloft.net> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Guan Xuetao <gxt@mprc.pku.edu.cn> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Matt Turner <mattst88@gmail.com>
* / PCI: cpcihp: Add missing curly braces in cpci_configure_slot()Dan Carpenter2015-03-12
|/ | | | | | | | | | I don't have this hardware but it looks like we weren't adding bridge devices as intended. Maybe the bridge is always the last device? Fixes: 05b125004815 ("PCI: cpcihp: Iterate over all devices in slot, not functions 0-7") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yijing Wang <wangyijing@huawei.com> CC: stable@vger.kernel.org # v3.9+
* Merge tag 'pm+acpi-3.20-rc1' of ↵Linus Torvalds2015-02-10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "We have a few new features this time, including a new SFI-based cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new devfreq class for providing its governors with raw utilization data and a new ACPI driver for AMD SoCs. Still, the majority of changes here are reworks of existing code to make it more straightforward or to prepare it for implementing new features on top of it. The primary example is the rework of ACPI resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with support for IOAPIC hotplug implemented on top of it, but there is quite a number of changes of this kind in the cpufreq core, ACPICA, ACPI EC driver, ACPI processor driver and the generic power domains core code too. The most active developer is Viresh Kumar with his cpufreq changes. Specifics: - Rework of the core ACPI resources parsing code to fix issues in it and make using resource offsets more convenient and consolidation of some resource-handing code in a couple of places that have grown analagous data structures and code to cover the the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng). - ACPI-based IOAPIC hotplug support on top of the resources handling rework (Jiang Liu, Yinghai Lu). - ACPICA update to upstream release 20150204 including an interrupt handling rework that allows drivers to install raw handlers for ACPI GPEs which then become entirely responsible for the given GPE and the ACPICA core code won't touch it (Lv Zheng, David E Box, Octavian Purdila). - ACPI EC driver rework to fix several concurrency issues and other problems related to events handling on top of the ACPICA's new support for raw GPE handlers (Lv Zheng). - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power Subsystem) driver for Intel chips (Ken Xue). - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko Nikula). - Two new blacklist entries for machines (Samsung 730U3E/740U3E and 510R) where the native backlight interface doesn't work correctly while the ACPI one does (Hans de Goede). - Rework of the ACPI processor driver's handling of idle states to make the code more straightforward and less bloated overall (Rafael J Wysocki). - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht, Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei Bai). - PCI core power management modification to avoid resuming (some) runtime-suspended devices during system suspend if they are in the right states already (Rafael J Wysocki). - New SFI-based cpufreq driver for Intel platforms using SFI (Srinidhi Kasagar). - cpufreq core fixes, cleanups and simplifications (Viresh Kumar, Doug Anderson, Wolfram Sang). - SkyLake CPU support and other updates for the intel_pstate driver (Kristen Carlson Accardi, Srinivas Pandruvada). - cpufreq-dt driver cleanup (Markus Elfring). - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla). - Generic power domains core code fixes and cleanups (Ulf Hansson). - Operating Performance Points (OPP) core code cleanups and kernel documentation update (Nishanth Menon). - New dabugfs interface to make the list of PM QoS constraints available to user space (Nishanth Menon). - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso). - New devfreq class (devfreq_event) to provide raw utilization data to devfreq governors (Chanwoo Choi). - Assorted minor fixes and cleanups related to power management (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel Machek, Todd E Brandt, Wonhong Kwon). - turbostat updates (Len Brown) and cpupower Makefile improvement (Sriram Raghunathan)" * tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits) tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission ACPI / video: Add disable_native_backlight quirk for Samsung 510R ACPI / PM: Remove unneeded nested #ifdef USB / PM: Remove unneeded #ifdef and associated dead code intel_pstate: provide option to only use intel_pstate with HWP ACPI / EC: Add GPE reference counting debugging messages ACPI / EC: Add query flushing support ACPI / EC: Refine command storm prevention support ACPI / EC: Add command flushing support. ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag ACPI: add AMD ACPI2Platform device support for x86 system ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse() ACPI / EC: Update revision due to raw handler mode. ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp. ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode. ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ...
| * ACPI: Introduce acpi_unload_parent_table() usages in Linux kernelLv Zheng2015-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPICA has implemented acpi_unload_parent_table() which can exactly replace the acpi_get_id()/acpi_unload_table_id() implemented in Linux kernel. The acpi_unload_parent_table() has been unit tested in ACPICA simulation environment. This patch can also help to reduce the source code differences between Linux and ACPICA. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | PCI: pciehp: Handle surprise add even if surprise removal isn't supportedBjorn Helgaas2015-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCIe spec (r3.0, sec 7.8.9) says Hot-Plug Surprise indicates support for surprise *removal*, but pciehp checked this to determine if it should handle presence detect interrupts for device *addition*. Allow surprise device addition even if the slot doesn't advertise support for surprise removal. Keith has a platform with slots for front-loading SFF devices. The slots do not have attention buttons and do not support surprise removal, but they do have presence detect. In that case, we still want to use presence detect for device addition. Keith's original patch handled surprise insertions only if Hot-Plug Capable is set. I think that test is superfluous because pciehp only claims slots that advertise Hot-Plug Capable (see get_port_device_capability()). Link: http://lkml.kernel.org/r/1419275223-14602-1-git-send-email-keith.busch@intel.com Based-on-patch-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rajat Jain <rajatxjain@gmail.com>
* | PCI: Delete unnecessary NULL pointer checksMarkus Elfring2014-12-26
|/ | | | | | | | | | The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds2014-12-19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "After stopping the full x86/apic branch, I took some time to go through the first block of patches again, which are mostly cleanups and preparatory work for the irqdomain conversion and ioapic hotplug support. Unfortunaly one of the real problematic commits was right at the beginning, so I rebased this portion of the pending patches without the offenders. It would be great to get this into 3.19. That makes reworking the problematic parts simpler. The usual tip testing did not unearth any issues and it is fully bisectible now. I'm pretty confident that this wont affect the calmness of the xmas season. Changes: - Split the convoluted io_apic.c code into domain specific parts (vector, ioapic, msi, htirq) - Introduce proper helper functions to retrieve irq specific data instead of open coded dereferencing of pointers - Preparatory work for ioapic hotplug and irqdomain conversion - Removal of the non functional pci-ioapic driver - Removal of unused irq entry stubs - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC allocations for everything which is called from there. - Small cleanups and fixes" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC x86, irq: Move IRQ initialization routines from io_apic.c into vector.c x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h x86, irq: Move HT IRQ related code from io_apic.c into htirq.c x86, irq: Move PCI MSI related code from io_apic.c into msi.c x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities x86, irq: Make UP version of irq_complete_move() an inline stub x86, irq: Move local APIC related code from io_apic.c into vector.c x86, irq: Introduce helpers to access struct irq_cfg x86, irq: Protect __clear_irq_vector() with vector_lock x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx() x86, irq: Refine hw_irq.h to prepare for irqdomain support x86, irq: Convert irq_2_pin list to generic list x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector() x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI x86, irq: Introduce helper to check whether an IOAPIC has been registered ...
| * x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.hJiang Liu2014-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up code by moving IOAPIC related declarations from hw_irq.h into io_apic.h. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Aubrey <aubrey.li@linux.intel.com> Cc: Ryan Desfosses <ryan@desfo.org> Cc: Quentin Lambert <lambert.quentin@gmail.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: http://lkml.kernel.org/r/1414397531-28254-14-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector()Jiang Liu2014-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the callers requires irq_attr to be filled in. IO_APIC_get_PCI_irq_vector() does not do anything useful with it either. Remove the parameter and fixup the call sites. [ tglx: Massaged changelog ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Ryan Desfosses <ryan@desfo.org> Cc: Quentin Lambert <lambert.quentin@gmail.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: http://lkml.kernel.org/r/1414397531-28254-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge tag 'pci-v3.19-changes' of ↵Linus Torvalds2014-12-10
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Here are the PCI changes intended for v3.19. I don't think there's anything very exciting here, but there was a lot of MSI-related stuff coming via Thomas. Details: NUMA - Allow numa_node override via sysfs (Prarit Bhargava) Resource management - Restore detection of read-only BARs (Myron Stowe) - Shrink decoding-disabled window while sizing BARs (Myron Stowe) - Add informational printk for invalid BARs (Myron Stowe) - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe) MSI - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang) - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang) - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang) Virtualization - xen: Process failure for pcifront_(re)scan_root() (Chen Gang) - Make FLR and AF FLR reset warning messages different (Gavin Shan) Generic host bridge driver - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi) - Convert to DT resource parsing API (Lorenzo Pieralisi) Freescale Layerscape - Add Freescale Layerscape PCIe driver (Minghuan Lian) NVIDIA Tegra - Do not build on 64-bit ARM (Thierry Reding) - Add Kconfig help text (Thierry Reding) Renesas R-Car - Make rcar_pci static (Jingoo Han) Samsung Exynos - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han) ST Microelectronics SPEAr13xx - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han) - Make spear13xx_add_pcie_port() __init (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) TI DRA7xx - Add dra7xx prefix to add_pcie_port() (Jingoo Han) - Make dra7xx_add_pcie_port() __init (Jingoo Han) TI Keystone - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) Miscellaneous - Delete unnecessary NULL pointer checks (Markus Elfring) - Remove unused to_hotplug_slot() (Gavin Shan) - Whitespace cleanup (Jingoo Han) - Simplify if-return sequences (Quentin Lambert)" * tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (28 commits) PCI: Remove fixed parameter in pci_iov_resource_bar() PCI: Add informational printk for invalid BARs PCI: tegra: Add Kconfig help text PCI: tegra: Do not build on 64-bit ARM PCI: spear: Remove unnecessary OOM message PCI: mvebu: Add a blank line after declarations PCI: designware: Add a blank line after declarations PCI: exynos: Remove unnecessary return statement PCI: imx6: Use tabs for indentation PCI: keystone: Remove unnecessary OOM message PCI: Remove unused and broken to_hotplug_slot() PCI: Make FLR and AF FLR reset warning messages different PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port() PCI: spear: Add __init annotation to spear13xx_add_pcie_port() PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc. PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port() PCI: layerscape: Add Freescale Layerscape PCIe driver PCI: Simplify if-return sequences PCI: Delete unnecessary NULL pointer checks PCI: Shrink decoding-disabled window while sizing BARs ...
| * PCI: Simplify if-return sequencesQuentin Lambert2014-11-10
| | | | | | | | | | | | | | | | | | Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"Kamal Mostafa2014-10-27
|/ | | | | | | | | | | | | | | This reverts bceee4a97eb5 ("PCI: pciehp: Prevent NULL dereference during probe") because it was accidentally applied twice: 62e4492c3063 ("PCI: Prevent NULL dereference during pciehp probe") bceee4a97eb5 ("PCI: pciehp: Prevent NULL dereference during probe") Revert the latter to dispose of the duplicated code block. [bhelgaas: tidy changelog, drop stable tag] Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Andreas Noever <andreas.noever@gmail.com>
* Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds2014-10-09
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
| *-. Merge branches 'pci/enumeration', 'pci/virtualization' and 'pci/cleanup' ↵Bjorn Helgaas2014-09-25
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next * pci/enumeration: PCI: Generate uppercase hex for modalias interface class * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9120 & SFC9140 PCI: Remove unused pci_get_dma_source() PCI: Remove unused pci_find_upstream_pcie_bridge() * pci/cleanup: PCI: Remove assignment from complicated "if" conditions PCI: Remove assignment from "if" conditions PCI: Remove unnecessary curly braces PCI: Add space before open parenthesis
| | | * PCI: Remove assignment from complicated "if" conditionsQuentin Lambert2014-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The modifications effectively change the value of len_tmp in the case where the first condition is not met. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | | * PCI: Remove assignment from "if" conditionsQuentin Lambert2014-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following Coccinelle semantic patch was used to find and correct cases of assignments in "if" conditions: @@ expression var, expr; statement S; @@ + var = expr; if( - (var = expr) + var ) S Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | | * PCI: Remove unnecessary curly bracesQuentin Lambert2014-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove curly braces in simple "if" cases. No functional change. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | | * PCI: Add space before open parenthesisQuentin Lambert2014-09-24
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | Add space before open parenthesis as is conventional. No functional change. [bhelgaas: fix a few more in ibmphp, shpchp] Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: pciehp: Stop disabling notifications during initYinghai Lu2014-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During pciehp initialization, we previously wrote two hotplug commands: pciehp_probe pcie_init pcie_disable_notification pcie_write_cmd # command 1 pcie_init_notification pcie_enable_notification pcie_write_cmd # command 2 For controllers with errata like Intel CF118, we previously waited for a timeout before issuing the second hotplug command because the first command only updates interrupt enable bits and is not a "real" hotplug command, so the controller doesn't report Command Completed for it. But there's no need to disable notifications in the first place. If BIOS left them enabled, we could easily take an interrupt before disabling them, so there's no benefit in disabling them for the tiny window before we enable them. Drop the unnecessary pcie_disable_notification() call. [bhelgaas: changelog] Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: pciehp: Add more Slot Control debug outputYinghai Lu2014-09-23
| | | | | | | | | | | | | | | | | | | | | Add more Slot Control debug output and move one print after pcie_write_cmd() to be consistent with other debug output. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: pciehp: Fix wait time in timeout messageYinghai Lu2014-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we warned about a timeout on a hotplug command, we previously printed the time between calls to pcie_write_cmd(), without accounting for any time spent actually waiting. Consider this sequence: pcie_write_cmd write SLTCTL cmd_started = jiffies # T1 pcie_write_cmd pcie_wait_cmd now = jiffies # T2 wait_event_timeout # we may wait here if (timeout) ctrl_info("Timeout on command issued %u msec ago", jiffies_to_msecs(now - cmd_started)) We previously printed (T2 - T1), but that doesn't include the time spent in wait_event_timeout(). Fix this by using the current jiffies value, not the one cached before calling wait_event_timeout(). [bhelgaas: changelog, use current jiffies instead of adding timeout] Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: pciehp: Prevent NULL dereference during probeAndreas Noever2014-09-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pciehp assumes that dev->subordinate, the struct pci_bus for a bridge's secondary bus, exists. But we do not create that bus if we run out of bus numbers during enumeration. This leads to a NULL dereference in init_slot() (and other places). Change pciehp_probe() to return -ENODEV when no secondary bus is present. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.2+
| * | PCI: pciehp: Reduce PCIe slot_ctrl to 16 bitsBjorn Helgaas2014-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4283c70e91dc ("PCI: pciehp: Make pcie_wait_cmd() self-contained") added a cache of the most recent command written to the Slot Control register. This register is only 16 bits wide, but the cache ("slot_ctrl") is 32 bits. Reduce slot_ctrl to a u16 so it matches the register size. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | ACPI / hotplug / PCI: Remove pci_configure_slot() usageBjorn Helgaas2014-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now configure each PCI device as it is enumerated, in pci_device_add(), so remove the configuration done in acpiphp. That configuration, in pci_configure_device(), does not include the MPS/MRRS configuration done by pcie_bus_configure_settings(), so keep that here. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
| * | PCI: shpchp: Remove pci_configure_slot() usageBjorn Helgaas2014-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now configure each PCI device as it is enumerated, in pci_device_add(), so remove the configuration done in shpchp. That configuration, in pci_configure_device(), does not include the MPS/MRRS configuration done by pcie_bus_configure_settings(), so keep that here. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
| * | PCI: pciehp: Remove pci_configure_slot() usageBjorn Helgaas2014-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now configure each PCI device as it is enumerated, in pci_device_add(), so remove the configuration done in pciehp. That configuration, in pci_configure_device(), does not include the MPS/MRRS configuration done by pcie_bus_configure_settings(), so keep that here. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
| * | PCI: Move pci_configure_slot() to drivers/pci/probe.cBjorn Helgaas2014-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move pci_configure_slot() and related functions from drivers/pci/hotplug/pcihp_slot to drivers/pci/probe.c. This is to prepare for doing device configuration during the normal enumeration process instead of just after hot-add. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: Move pci_get_hp_params() to drivers/pci/pci-acpi.cBjorn Helgaas2014-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move pci_get_hp_params() and related functions from drivers/pci/hotplug/acpi_pcihp.c to drivers/pci/pci-acpi.c. Previously, pci_get_hp_params() was used only by hotplug drivers. But future changes will move this into the normal device enumeration process, so it will be used even when CONFIG_HOTPLUG_PCI is not set. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: pciehp: Configure hot-added display devicesBjorn Helgaas2014-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We configure cache line size and other settings of hot-added devices, e.g., based on ACPI _HPP or _HPX methods. Previously we skipped this for display devices, but ACPI rev 5.0, sec 6.2.7 and 6.2.8 have no requirement to skip them. Remove the check so we configure display devices the same way we configure other devices. See also ac81860ea073 ("PCI: hotplug: pciehp: Removed check for hotplug of display devices"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* | | PCI: pciehp: Fix pcie_wait_cmd() timeoutYinghai Lu2014-09-22
| | | | | | | | | | | | | | | | | | | | | pcie_poll_cmd() take msecs instead of jiffies, so convert timeout to msecs. Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | |
| \ \
*-. | | Merge branch 'pci/vga'; commit '6a73336bde29' into for-linusBjorn Helgaas2014-09-19
|\ \| | | | |/ | |/| | | | | | | | | | | | | | | | | | | * pci/vga: vgaarb: Drop obsolete #ifndef vgaarb: Don't default exclusively to first video device with mem+io * commit '6a73336bde29': PCI: Remove "no hotplug settings from platform" warning
| | * PCI: Remove "no hotplug settings from platform" warningBjorn Helgaas2014-09-12
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We print way too many messages like this: pci 0000:00:00.0: no hotplug settings from platform pci 0000:00:00.0: using default PCI settings This usually happens when the platform doesn't supply an ACPI _HPP method, but the method is optional, so there's no point in warning about it. Not only are the messages useless, but we call pci_configure_slot() far too many times, so they're repeated many times. I'll fix the overuse of pci_configure_slot() too, but that will wait until the next merge window. For now, just remove both log messages. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84391 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* / PCI: Add pci_ignore_hotplug() to ignore hotplug events for a deviceBjorn Helgaas2014-09-10
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold), normally generates a hot-remove event that unbinds the driver. Some drivers expect to remain bound to a device even while they power it off and back on again. This can be dangerous, because if the device is removed or replaced while it is powered off, the driver doesn't know that anything changed. But some drivers accept that risk. Add pci_ignore_hotplug() for use by drivers that know their device cannot be removed. Using pci_ignore_hotplug() tells the PCI core that hot-plug events for the device should be ignored. The radeon and nouveau drivers use this to switch between a low-power, integrated GPU and a higher-power, higher-performance discrete GPU. They power off the unused GPU, but they want to remain bound to it. This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug") but extends it to work with both acpiphp and pciehp. This fixes a problem where systems with dual GPUs using the radeon drivers become unusable, freezing every few seconds (see bugzillas below). The resume of the radeon device may also fail, e.g., This fixes problems on dual GPU systems where the radeon driver becomes unusable because of problems while suspending the device, as in bug 79701: [drm] radeon: finishing device. radeon 0000:01:00.0: Userspace still has active objects ! radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free ... WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]() trying to unbind memory from uninitialized GART ! or while resuming it, as in bug 77261: radeon 0000:01:00.0: ring 0 stalled for more than 10158msec radeon 0000:01:00.0: GPU lockup ... radeon 0000:01:00.0: GPU pci config reset pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1) radeon 0000:01:00.0: GPU reset succeeded, trying to resume *ERROR* radeon: dpm resume failed radeon 0000:01:00.0: Wait for MC idle timedout ! Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261 Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701 Reported-by: Shawn Starr <shawn.starr@rogers.com> Reported-by: Jose P. <lbdkmjdf@sharklasers.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajat Jain <rajatxjain@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> CC: stable@vger.kernel.org # v3.15+
* Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2014-08-14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull device tree updates from Grant Likely: "The branch contains the following device tree changes the v3.17 merge window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits) of: Fixing OF Selftest build error drivers: of: add automated assignment of reserved regions to client devices of: Use proper types for checking memory overflow of: typo fix in __of_prop_dup() Adding selftest testdata dynamically into live tree of: Add todo tasklist for Devicetree of: Transactional DT support. of: Reorder device tree changes and notifiers of: Move dynamic node fixups out of powerpc and into common code of: Make sure attached nodes don't carry along extra children of: Make devicetree sysfs update functions consistent. of: Create unlocked versions of node and property add/remove functions OF: Utility helper functions for dynamic nodes of: Move CONFIG_OF_DYNAMIC code into a separate file of: rename of_aliases_mutex to just of_mutex of/platform: Fix of_platform_device_destroy iteration of devices of: Migrate of_find_node_by_name() users to for_each_node_by_name() tty: Update hypervisor tty drivers to use core stdout parsing code. arm/versatile: Add the uart as the stdout device. of: Enable console on serial ports specified by /chosen/stdout-path ...
| * of: Migrate of_find_node_by_name() users to for_each_node_by_name()Grant Likely2014-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a bunch of users open coding the for_each_node_by_name() by calling of_find_node_by_name() directly instead of using the macro. This is getting in the way of some cleanups, and the possibility of removing of_find_node_by_name() entirely. Clean it up so that all the users are consistent. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'for-linus' of ↵Linus Torvalds2014-08-07
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
| * | s390/pci: fix kmsg componentGerald Schaefer2014-07-22
| |/ | | | | | | | | | | | | KMSG_COMPONENT has to be defined instead of COMPONENT. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Merge tag 'pm+acpi-3.17-rc1' of ↵Linus Torvalds2014-08-06
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18 commits) and system suspend/hibernation (9 commits). From the new code perspective, the ACPICA update brings ACPI 5.1 to the table, including a new device configuration object called _DSD (Device Specific Data) that will hopefully help us to operate device properties like Device Trees do (at least to some extent) and changes related to supporting ACPI on ARM. Apart from that we have hibernation changes making it use radix trees to store memory bitmaps which should speed up some operations carried out by it quite significantly. We also have some power management changes related to suspend-to-idle (the "freeze" sleep state) support and more preliminary changes needed to support ACPI on ARM (outside of ACPICA). The rest is fixes and cleanups pretty much everywhere. Specifics: - ACPICA update to upstream version 20140724. That includes ACPI 5.1 material (support for the _CCA and _DSD predefined names, changes related to the DMAR and PCCT tables and ARM support among other things) and cleanups related to using ACPICA's header files. A major part of it is related to acpidump and the core code used by that utility. Changes from Bob Moore, David E Box, Lv Zheng, Sascha Wildner, Tomasz Nowicki, Hanjun Guo. - Radix trees for memory bitmaps used by the hibernation core from Joerg Roedel. - Support for waking up the system from suspend-to-idle (also known as the "freeze" sleep state) using ACPI-based PCI wakeup signaling (Rafael J Wysocki). - Fixes for issues related to ACPI button events (Rafael J Wysocki). - New device ID for an ACPI-enumerated device included into the Wildcat Point PCH from Jie Yang. - ACPI video updates related to backlight handling from Hans de Goede and Linus Torvalds. - Preliminary changes needed to support ACPI on ARM from Hanjun Guo and Graeme Gregory. - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui. - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros (Rafael J Wysocki). - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J Wysocki. - Cleanups and improvements related to system suspend from Lan Tianyu, Randy Dunlap and Rafael J Wysocki. - ACPI battery cleanup from Wei Yongjun. - cpufreq core fixes from Viresh Kumar. - Elimination of a deadband effect from the cpufreq ondemand governor and intel_pstate driver cleanups from Stratos Karafotis. - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas Patocka. - Fix for the imx6 cpufreq driver from Anson Huang. - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep Tripathy and Mohammad Merajul Islam Molla. - Build fix for the big_little cpuidle driver from Sachin Kamat. - Configuration fix for the Operation Performance Points (OPP) framework from Mark Brown. - APM cleanup from Jean Delvare. - cpupower utility fixes and cleanups from Peter Senna Tschudin, Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger" * tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits) ACPI / LPSS: add LPSS device for Wildcat Point PCH ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug. ACPI / processor: Make it possible to get local x2apic id via _MAT ...
| * | ACPI / hotplug / PCI: Fix sparse non static symbol warningWei Yongjun2014-07-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following sparse warning: drivers/pci/hotplug/acpiphp_glue.c:923:6: warning: symbol 'acpiphp_drop_bridge' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | ACPI / hotplug: Simplify acpi_set_hp_context()Rafael J. Wysocki2014-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since all of the acpi_set_hp_context() callers pass at least one NULL function pointer and one caller passes NULL function pointers only to it, drop function pointer arguments from acpi_set_hp_context() and make the callers initialize the function pointers in struct acpi_hotplug_context by themselves before passing it to acpi_set_hp_context(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
| * | ACPI / hotplug / PCI: Eliminate acpiphp_dev_to_bridge()Rafael J. Wysocki2014-07-15
| |/ | | | | | | | | | | | | | | | | | | Since acpiphp_dev_to_bridge() is only called by acpiphp_check_host_bridge(), move the code from it to that function directly which reduces the call chain depth and makes the code slightly easier to follow. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: cpqphp: Remove unnecessary null test before debugfs_remove()Fabian Frederick2014-07-07
| | | | | | | | | | | | | | | | Fix checkpatch warning: "WARNING: debugfs_remove(NULL) is safe this check is probably not required" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Ryan Desfosses <ryan@desfo.org>
* | PCI: pciehp: Clear Data Link Layer State Changed during initMyron Stowe2014-07-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During PCIe hot-plug initialization - pciehp_probe() - data structures related to slot capabilities are set up. As part of this set up, ISRs are put in place to handle slot events and all event bits are cleared out. This patch adds the Data Link Layer State Changed (PCI_EXP_SLTSTA_DLLSC) Slot Status bit to the event bits that are cleared out during initialization. If the BIOS doesn't clear DLLSC before handoff to the OS, pciehp notices that it's set and interprets it as a new Link Up event, which results in spurious messages: pciehp 0000:82:04.0:pcie24: slot(4): Link Up event pciehp 0000:82:04.0:pcie24: Device 0000:83:00.0 already exists at 0000:83:00, cannot hot-add pciehp 0000:82:04.0:pcie24: Cannot add device at 0000:83:00 Prior to e48f1b67f668 ("PCI: pciehp: Use link change notifications for hot-plug and removal"), pciehp ignored DLLSC. Reference: PCI-SIG. PCI Express Base Specification Revision 4.0 Version 0.3 (PCI-SIG, 2014): 7.8.11. Slot Status Register (Offset 1Ah). [bhelgaas: add e48f1b67f668 ref and stable tag] Fixes: e48f1b67f668 ("PCI: pciehp: Use link change notifications for hot-plug and removal") Link: https://bugzilla.kernel.org/show_bug.cgi?id=79611 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+
* | PCI: pciehp: Remove struct controller.no_cmd_completeRajat Jain2014-07-05
| | | | | | | | | | | | | | | | | | | | | | | | "no_cmd_complete" is only used once, and it duplicates read-only information we already have in the cached Slot Capabilities value. Remove the field and use the existing macro NO_CMD_CMPL() instead. [bhelgaas: changelog] Signed-off-by: Rajat Jain <rajatxjain@gmail.com> Signed-off-by: Rajat Jain <rajatjain@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: pciehp: Remove assumptions about which commands cause completion eventsBjorn Helgaas2014-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use incorrect logic to decide whether a PCIe hotplug controller generates command completion events. 5808639bfa98 ("pciehp: fix slow probing") assumed that the Slot Status "Command Completed" bit was set only for commands affecting slot power, indicators, or electromechanical interlock. That assumption is false: per sec. 6.7.3.2 of PCIe spec r3.0, a write targeting any portion of the Slot Control register is a command, and (if command completed events are supported) software must wait for a command to complete before issuing the next command. 5808639bfa98 was to fix boot-time timeouts (see bugzilla below) on a Lenovo Thinkpad R61 with an Intel hotplug controller. The controller probably has the Intel CF118 erratum, which means it doesn't report Command Completed unless the Slot Control power, indicator, or interlock bits are changed. This causes a timeout because pciehp always waits for Command Complete (if supported), regardless of which bits are changed. Remove the incorrect logic because the timeouts have been addressed differently by these changes: PCI: pciehp: Wait for hotplug command completion lazily PCI: pciehp: Compute timeout from hotplug command start time Link: https://bugzilla.kernel.org/show_bug.cgi?id=10751 Tested-by: Rajat Jain <rajatxjain@gmail.com> (IDT 807a controller) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* | PCI: pciehp: Compute timeout from hotplug command start timeBjorn Helgaas2014-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we issue a hotplug command, go do something else, then come back and wait for the command to complete, we don't have to wait the whole timeout period, because some of it elapsed while we were doing something else. Keep track of the time we issued the command, and wait only until the timeout period from that point has elapsed. For controllers with errata like Intel CF118, we previously timed out before issuing the second hotplug command: At time T1 (during boot): - Write DLLSCE, ABPE, PDCE, etc. to Slot Control At time T2 (hotplug event): - Wait for command completion (CC) in Slot Status - Timeout at T2 + 1 second because CC is never set in Slot Status - Write PCC, PIC, etc. to Slot Control With this change, we wait until T1 + 1 second instead of T2 + 1 second. If the hotplug event is more than 1 second after the boot-time initialization, we won't wait for the timeout at all. We still emit a "Timeout on hotplug command" message if it timed out; we should see this on the first hotplug event on every controller with this erratum, as well as on real errors on controllers without the erratum. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Tested-by: Rajat Jain <rajatxjain@gmail.com> (IDT 807a controller) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 20:13:35 -0500