aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* PHYLIB: Add 1000Base-X support for Broadcom bcm5482Nate Case2008-05-22
| | | | | | | | | | Configure the BCM5482S secondary SerDes for 1000Base-X mode when the appropriate dev_flags are passed in to phy_connect(). This is needed when the PHY is used for fiber and backplane connections. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: Add "follow" option to fail_over_macJay Vosburgh2008-05-22
| | | | | | | | | | | | | | | | | | | | | Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: refactor ARP active-backup monitorJay Vosburgh2008-05-22
| | | | | | | | | | | | | | | | | | | Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: Send more than one gratuitous ARP when slave takes overMoni Shoua2008-05-22
| | | | | | | | | | | | | | | With IPoIB, reception of gratuitous ARP by neighboring hosts is essential for a successful change of slaves in case of failure. Otherwise, they won't learn about the HW address change and need to wait a long time until the neighboring system gives up and sends an ARP request to learn the new HW address. This patch decreases the chance for a lost of a gratuitous ARP packet by sending it more than once. The number retries is configurable and can be set with a module param. Signed-off-by: Moni Shoua <monis@voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: Remove unneeded list_empty checks.Pavel Emelyanov2008-05-22
| | | | | | | | | | Some places iterate over the checked list right after the check itself, so even if the list is empty, the list_for_each_xxx iterator will make everything right by himself. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: Relax unneeded _safe lists iterations.Pavel Emelyanov2008-05-22
| | | | | | | | | | | | Many places either do not modify the list under the list_for_each_xxx, or break out of the loop as soon as the first element is removed. Thus, this _safe iteration just occupies some unneeded .text space and requires an additional variable. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: Remove redundant argument from bond_create.Pavel Emelyanov2008-05-22
| | | | | | | | | | | | While we're fixing the bond_create, I hope it's OK to polish it a bit after the fixes. The third argument is NULL at the first caller and is ignored by the second one, so remove it. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: remove test for IP in ARP monitorJay Vosburgh2008-05-22
| | | | | | | | | | | | | | | | | | Remove bond_has_ip and all references to it. With this change, the ARP monitor will always send ARP probes if the master is up and has at least one slave. If the bond has an IP address, it is used in the ARP probe; if not, the probes are sent with all zeros in the sender's IP address (which is consistent with an RFC 2131 4.4.1 duplicate address probe). This is useful for cases when bonding itself is hidden underneath a layer of virtual devices, e.g., with Xen. Change suggested by Tsutomu Fujii <t-fujii@nb.jp.nec.com>, who included a one-line patch that only affected active-backup mode. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bonding: Use msecs_to_jiffies, eliminate panicJay Vosburgh2008-05-22
| | | | | | | | | | | | | | | | | | | | | | | Convert bonding to use msecs_to_jiffies instead of doing the math. For the ARP monitor, there was an underflow problem that could result in an infinite loop. The miimon already had that worked around, but this is cleaner. Originally by Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Jay Vosburgh corrected a math error in the original; Nicolas' original commit message is: When setting arp_interval parameter to a very low value, delta_in_ticks for next arp might become 0, causing an infinite loop. See http://bugzilla.kernel.org/show_bug.cgi?id=10680 Same problem for miimon parameter already fixed, but fix might be enhanced, by using msecs_to_jiffies() function. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* misc drivers/net endianness noiseAl Viro2008-05-22
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* cxgb3 - Add LRO supportDivy Le Ray2008-05-22
| | | | | | | Add LRO support. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* cxgb3 - Add page support to jumbo frame Rx queueDivy Le Ray2008-05-22
| | | | | | | Add page support to Jumbo frame Rx queues. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* cxgb3 - Fix dma mapping error pathDivy Le Ray2008-05-22
| | | | | | | Take potential dma mapping errors in account. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* bnx2: Update version to 1.7.6.Michael Chan2008-05-17
| | | | | Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Pre-initialize struct cpu_reg.Benjamin Li2008-05-17
| | | | | | | | | | | Instead of assigning values for the struct cpu_reg's at runtime, we already know these values at compile time. Therefore, we can use designated initializers, to initialize these structures and not have to incur this assignment cost at run-time. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Rename RX_COPY_THRESH to BNX2_RX_COPY_THRESH.Benjamin Li2008-05-17
| | | | | | | | | To make the bnx2 code more consistent, all instances of RX_COPY_THRESH have been changed to BNX2_RX_COPY_THRESH. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Remove the rx_offset field from the bnx2 structure.Benjamin Li2008-05-17
| | | | | | | | | | | | | | The rx_offset field is set to a constant value and initialized only once. By replacing all references to the rx_offset field, we can eliminate rx_offset from the bnx2 structure. This will save 4 bytes for every bnx2 instance. [Added parentheses to the definition of BNX2_RX_OFFSET, as noted by Ben Hutchings.] Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Add EEH PCI recovery.Wendy Xiong2008-05-17
| | | | | | | | | Add PCI recovery functions to the driver. The initial pci state is also saved so the the MSI state can be restored during PCI recovery. Signed-off-by: Wendy Xiong <wendyx@us.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Allow phy reset to be skipped during chip reset.Michael Chan2008-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | Andy Gospodarek <andy@greyhouse.net> found that netconsole would panic when resetting bnx2 devices. >From Andy: "The issue is the bnx2_set_link in bnx2_init_nic will print a link-status message before we are fully initialized and ready to start polling. Polling is currently disabled in this state, but since the __LINK_STATE_RX_SCHED is overloaded to not only try and disable polling but also to make the system aware there is something waiting to be polled, we really have to fix this in drivers. The problematic call is the one to netif_rx_complete as it tries to remove an entry from the poll_list when there isn't one." While this netconsole problem should be fixed separately, we really should not reset the PHY when changing ring sizes, MTU, or other similar settings. The PHY reset causes several seconds of unnecessary link disruptions. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-05-15
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * libertas: remove lbs_get_data_rate()Holger Schurig2008-05-14
| | | | | | | | | | | | | | lbs_get_data_rate() gets called, but no-one uses it's result. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: use the bitrev helpers rather than rolling a private oneHarvey Harrison2008-05-14
| | | | | | | | | | | | | | | | | | | | | | | | The 4-bit reversal flip_4bit is replaced with the bitrev helper bitrev8 and a 4-bit shift. The B43_WARN is moved to the location where a register is read from for checking there. The other caller explicitly passes an array index which is guaranteed to be within range and so a B43_WARN is not added there. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Fix loop variable initializationsBob Copeland2008-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ath5k_tasklet_rx, both status structures 'rxs' and 'rs' are initialized at the top of the tasklet, but not within the loop. If the loop is executed multiple times in the tasklet then the variables may see changes from previous packets. For TKIP, this results in 'Invalid Michael MIC' errors if two packets are processed in the tasklet: rxs.flag gets set to RX_DECRYPTED by mac80211 when it decrypts the first encrypted packet. The subsequent packet will have RX_DECRYPTED set upon entry to mac80211, so mac80211 will not try to decrypt it. We currently initialize all but two fields in the structures, so fix the other two. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: nphy.c remove duplicated includeHuang Weiyi2008-05-14
| | | | | | | | | | | | | | | | | | Remove duplicated include <linux/delay.h> in drivers/net/wireless/b43/nphy.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: use hardware flags for signal/noise unitsBruno Randolf2008-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * zd1211rw: initial IBSS supportBruno Randolf2008-05-14
| | | | | | | | | | | | | | | | | | | | | | this adds initial IBSS support for the zydas zd1211rw: convince driver that it can do IBSS mode. add mac80211 beacon_update callback. IBSS merge and TSF updates don't work yet, but it makes the driver usable in ad-hoc networks. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * atmel: use netstats in net_device structurePaulius Zaleckas2008-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | Use net_device_stats from net_device structure instead of local. Kill atmel_get_stats function, because by default it is used identical internal_stats function from net/core/dev.c No need to memset stats to 0, because they are allocated by kzalloc. P.S. Someone should cleanup init_atmel_card function from unneeded initializations to 0/NULL. Out of scope for this patch. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * arlan: use netstats in net_device structurePaulius Zaleckas2008-05-14
| | | | | | | | | | | | | | Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl3945: do not delay hardware scan if it is a direct scanBill Moss2008-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iwl3945 <---> mac80211 <----> wpa_supplicant <---> NetworkManager When a hardware scan is completed and another scan is requested in less than two seconds, iwlwifi will not do the second scan and will pass the error code -EAGAIN back to mac80211 where it quickly dies. The error code is not passed along to the calling program wpa_supplicant. After a timeout, wpa_supplicant will just give up but it will not know why the scan failed. This is a weakness in the design. I ran into this issue when I was trying to figure out why it takes more an a minute for NetworkManager to connect after Networking has been disabled and then re-enabled. I found a good deal of unnecessary work being done because mac80211 requests authentication when the interface is not configured, the ANY mode. I created an experimental passive (NOTANY) mode for mac80211 to eliminate this case. Then NetworkManager became so fast that I ran into the iwlwifi 2 second delay next scan issue which we are discussing. The patch resolves the problem by bypassing the delay if the scan request is a direct scan. It should do less harm to the hardware. Signed-off-by: Bill Moss <bmoss@CLEMSON.EDU> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: adding parameter of fw_restartEster Kummer2008-05-14
| | | | | | | | | | | | | | | | | | This patch adds a module parameter of fw_restart which determine if the uCode will be restarted or not in case of error. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: add device sysfs version entryTomas Winkler2008-05-14
| | | | | | | | | | | | | | | | This patch adds sysfs version file that displays ucode version and type. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: update levels of debug printsEster Kummer2008-05-14
| | | | | | | | | | | | | | | | | | | | This patch updates the levels of debug prints, leaving only one level in each debug print. It was anoying and caused unnecessary prints on hot path. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: move debug_level to sysfs/bus/pci/devicesEster Kummer2008-05-14
| | | | | | | | | | | | | | | | | | This patch ports the debug_level from sysfs/bus/pci/drivers/iwl4965 to /sys/class/net/wlanX/device/debug_level Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * airo: use netstats in net_device structurePaulius Zaleckas2008-05-14
| | | | | | | | | | | | | | | | Use net_device_stats from net_device structure instead of local. Changed airo_read_stats function parameter to net_device. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: fix spinlock used before initializedRon Rindjunsky2008-05-14
| | | | | | | | | | | | | | | | | | The patch fixes spinlock priv->lock (apm_ops.init) is used before it has been initialized. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: remove 4965 prefix from iwl4965_kw and iwl4965_tx_queueRon Rindjunsky2008-05-14
| | | | | | | | | | | | | | | | This patch removes the 4965 prefix to form iwl_kw and iwl_tx_queue structs, as they are used mostly in iwlcore now. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: handle shared memory Rx index accessRon Rindjunsky2008-05-14
| | | | | | | | | | | | | | | | This patch splits ucode's and driver's shared memory Rx index access to match 4965 and 5000 offsets. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi : Set monitor mode for 3945Abhijeet Kolekar2008-05-14
| | | | | | | | | | | | | | | | The patch leverages mac80211 configure_filter to enable iwl3945 monitor mode. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi : Set monitor mode for 4965Abhijeet Kolekar2008-05-14
| | | | | | | | | | | | | | | | The patch leverages mac80211 configure_filter to enable iwl4965 monitor mode. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: move iwl4965_init_alive_start to iwl-4965.cEmmanuel Grumbach2008-05-14
| | | | | | | | | | | | | | | | This patch moves iwl_4965_init_alive_start to iwl-4965.c. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: compile iwl-sta into iwlcoreTomas Winkler2008-05-14
| | | | | | | | | | | | | | This patch moves iwl-sta into iwl-core. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: move NIC init and Tx queues init to iwlcoreRon Rindjunsky2008-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does the following: 1 - change hw_nic_init from a handler to a function 2 - move hw_nic_init function to iwlcore 3 - open a new file - iwl-tx.c 4 - move all Tx queues initialization (part of NIC init) to iwl-tx.c 5 - move iwl_rx_init, previously as part of the NIC init, to iwl-rx.c 6 - iwl4965_tfd_frame rename to iwl_tfd_frame Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: create disable SCD Tx FIFOs handlerRon Rindjunsky2008-05-14
| | | | | | | | | | | | | | | | | | This patch moves disabeling Tx FIFOs in NIC SCD to seperate handlers in 4965 and 5000 cards. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: move iwl4965_set_rxon_ht into iwlcoreTomas Winkler2008-05-14
| | | | | | | | | | | | | | | | | | This patch moves iwl4965_set_rxon_ht to iwlcore under name iwl_set_rxon_ht. It also moves collateral changes iwl_is_channel_extension and iwl_is_fat_tx_allowed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: move per driverdebug_level to per deviceEster Kummer2008-05-14
| | | | | | | | | | | | | | | | | | This patch ports the debug_level to iwl_priv and changes the format of the debug prints. Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi-5000: add build_addsta_hcmd handler for 5000 HWTomas Winkler2008-05-14
| | | | | | | | | | | | | | This patch adds iwl5000_build_addsta_hcmd handler. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: generalize iwl4965_send_add_station functionTomas Winkler2008-05-14
| | | | | | | | | | | | | | | | | | | | This patch moves iwl4965_send_add_station to iwlcore under new name iwl_send_add_sta. Function uses build command handler in order to support multiple HWs. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: remove 4965 from rx_packetTomas Winkler2008-05-14
| | | | | | | | | | | | | | This patch removes 4965 mark from rx_packet. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: debugfs EEPROM dumpTomas Winkler2008-05-14
| | | | | | | | | | | | | | | | This patch adds EEPROM dump in debugfs. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: remove 4965 from station_entryTomas Winkler2008-05-14
| | | | | | | | | | | | | | This patch removes 4965 mark form the station entry structure. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-28 21:02:27 -0500