aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* [BNX2X]: update version, remove CVS stringsEliezer Tamir2008-02-28
| | | | | Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Fix Xmit bugsEliezer Tamir2008-02-28
| | | | | | | | | Several endianity corrections in start_xmit() Fixed TSO bug where packets were missing the TCP flags. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Prevent PCI queue overflowEliezer Tamir2008-02-28
| | | | | | | Limit traffic through an internal queue to prevent overflow. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: fix slowpath races and lockingEliezer Tamir2008-02-28
| | | | | | | | | | | | | | | | | | | Fixed locking between fastpath and slowpath operations. Corrected order of traffic disabling to prevent race when going down under traffic. - first have the microcode drop all incoming packets - then do the slowpath stuff - only then reset the MAC Got rid of in_reset_task. Remove_one() and friends would deference a null pointer if init_one failed. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: fix HW attentions and error handlingEliezer Tamir2008-02-28
| | | | | | | | | | | | | Some of the HW attentions, used to indicate an error were not properly acked. This will cause the driver to endlessly receive interrupts when such an error happens. Had to break the code into smaller chunks because it got too nested. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: fix MSI-X/INT#A errataEliezer Tamir2008-02-28
| | | | | | | | | | Errata A0.158 workaround. Running in INT#A mode after running with MSI-X fails due to a PCI core bug. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: correct statisticsEliezer Tamir2008-02-28
| | | | | | | Errors were summed improperly, some stats were missing. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Correct RX filtering and MC configurationEliezer Tamir2008-02-28
| | | | | | | | | | | | | | | The configuration of RX filtering needed the following corrections: Drop flags need to be set per Rx queue. Have to tell the microcode to collect drop stats, and properly wait for them to complete when going down. Sometimes we failed to detect proper completion due to a logical error in the wait loop. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Correct Link managementEliezer Tamir2008-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Correct init_one()Eliezer Tamir2008-02-28
| | | | | | | | Correct PCI-E info printed by init_one() In one case it failed to free the netdev. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BNX2X]: Spelling fixesEliezer Tamir2008-02-28
| | | | | Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled.Alexey Zaytsev2008-02-28
| | | | | | | | | | This may happen e.g. when the ssb is statically enables by the b44 driver, and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the b43/b43legacy drivers are built statically. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Use a separate config option for the b43 pci to ssb bridge.Alexey Zaytsev2008-02-28
| | | | | | | | | | | | | The bridge code was unnecessary enabled by the b44 driver, but it prevents the bcm43xx driver from being loaded, as the bridge claims the same pci ids. Now we enable the birdge only if the b43{legacy} drivers are selected. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: Remove unused exportsRoland Dreier2008-02-28
| | | | | | | | | | | | | | | | | The libertas driver exports a number of symbols with no in-tree users; remove these unused exports. lbs_reset_device() is completely unused, with no callers at all, so remove the function completely. A couple of these unused exported symbols are static, which causes the following build error on ia64 with gcc 4.2.3: drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix rt2x00lib_reset_link_tuner()Ivo van Doorn2008-02-28
| | | | | | | | | | | | | | | | | rt2x00lib_reset_link_tuner() can be called from within the link tuner itself. This means that it should _not_ call rt2x00lib_stop_link_tuner() since that will cause the thread to hang. Reorder the things that should be done during a link tuner reset and during a link tuner start. Also make antenna tuning the last step of the link tuner since it could possibly reset some statistical information which we need for average calculation. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Don't switch to antenna with low rssiIvo van Doorn2008-02-28
| | | | | | | | | | | | When rssi_a > rssi_b is true and the current antenna was already antenna A, then rt2x00 incorrectly jumped to antenna B. Also don't configure the antenna when there has been no change in the antenna setup. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add link tuner safe RX toggle statesIvo van Doorn2008-02-28
| | | | | | | | | | | | | This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix antenna diversityIvo van Doorn2008-02-28
| | | | | | | | | | | | | | | Fix 2 issues in antenna diversity selection. 1) the following statement will always return true. if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) It is cleaner to check if the absolute value is smaller then 5. 2) Only enable software diversity when default antenna setup indicates support for it. Don't select it when the hardware does not indicate support for it... Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* gelic wireless driver needs WIRELESS_EXT supportSebastian Siewior2008-02-28
| | | | | | | | | | | | | | | | | CC drivers/net/ps3_gelic_wireless.o | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops': | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data' | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers' | make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1 | make[2]: *** [drivers/net] Error 2 | make[1]: *** [drivers] Error 2 | make[1]: *** Waiting for unfinished jobs.... | make: *** [sub-make] Error 2 Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* PS3: gelic: Link the wireless net_device structure to the corresponding ↵Masakazu Mokuno2008-02-28
| | | | | | | | | | | | | | device structure Link the net_device structure of the wireless part to the corresponding device structure. Without this, the sysfs node for this net_device would not have 'device' link. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rndis_wlan: fix sparse warningsJohannes Berg2008-02-28
| | | | | | | | | It is obviously wrong to use an enum in a little endian struct, and those other enums should be declared differently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [MACVLAN]: Update Kconfig to refer to iproutePatrick McHardy2008-02-26
| | | | | | | | | Since the macvlan release I had at least 5 users asking how to configure it since the old userspace tool doesn't work with the version in the kernel. Add a pointer to the Kconfig help. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: remove unused read value in ASPM disable code.Auke Kok2008-02-24
| | | | | Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000e: fix spelling errors in commentsAuke Kok2008-02-24
| | | | | | | Fix some spelling errors and inconsistencies in comment blocks. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000e: fix flow control denial of service possibilityJesse Brandeburg2008-02-24
| | | | | | | | | | this patch avoids a denial of service from an evildoer sending a continuous stream of flow control at our adapter that is plugged into a non-flow control enabled switch. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000e: fix flow control when using ethtool overridesJesse Brandeburg2008-02-24
| | | | | | Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000e: fix link up message to show ethX:Jesse Brandeburg2008-02-24
| | | | | | Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000e: 82573 can use eerd method to read eepromAuke Kok2008-02-24
| | | | | | | | | This simplifies the 82571/2/3 family initialization a bit and removes an initialization table no longer needed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ixgb: add RNBC counter - no buffer count - to ethtool statsAuke Kok2008-02-24
| | | | | | | | | | | | This counter is valuable to determine if the system is unable to timely return buffers to the hardware and this counter starts to increase well before the hardware starts to drop packets. If users experience rx_no_buffer_count increasing, they should increase the amount of descriptors. That will provide more buffers for the hardware and will decrease the chance of hard drops. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* macb: Fix speed settingAtsushi Nemoto2008-02-24
| | | | | | | | Fix NCFGR.SPD setting on 10Mbps. This bug was introduced by conversion to generic PHY layer in kernel 2.6.23. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sky2: fix LED managementStephen Hemminger2008-02-24
| | | | | | | | | Fix problems in LED management, so ethtool -p works correctly on Yukon-EC and other chips. The driver was incorrectly setting the PHY LED overide bits. Moral: read the spec sheet, not the vendor driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [netdrvr] via-rhine: Use register offset definition for WOLcgClrLaura Garcia2008-02-24
| | | | | | | | | | Use register offset definition for WOLcgClr, rather than a magic number. This patch does not change the driver behaviour. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* net/phy/mdio_bus.c: fix a check-after-useAdrian Bunk2008-02-23
| | | | | | | This patch fixes a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* igb: Fix panic with NICs with 1000BASE-SX PHYBill Hayes2008-02-23
| | | | | | | | | | | This patch eliminates a kernel panic with the igb driver in 2.6.25-rc2 when running on a Intel 82575 Ethernet controller with a 1000BASE-SX PHY. The panic does not happen with the 1000BASE-T PHY, only with a SX connection. Signed-off-by: Bill Hayes <bill.hayes@hp.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* gianfar: don't pass NULL dev ptr to DMA opsBecky Bruce2008-02-23
| | | | | | | | | | Change all dma op invocations in gianfar.c to actually pass in the device pointer. Currently, the value is ignored, but it will be used going forward as we implement archdata for 32-bit powerpc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sis190: read the mac address from the eeprom firstFrancois Romieu2008-02-23
| | | | | | | | | | | Reading a serie of zero from the cmos sram area do not work well with is_valid_ether_addr(). Let's read the mac address from the eeprom first as it seems more reliable. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=9831 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* tlan: add static to function definitionsHarvey Harrison2008-02-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message.Komuro2008-02-23
| | | | | | | | | | | | | * If ConfigBase is 0x03c0 && manfid is (0x0149,0xc1ab), printk "use axnet_cs instead" message. Actually, most of the card with manfid(0x0149, 0xc1ab) use pcnet_cs driver. * remove entry (0x021b, 0x0202) Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/net/cs89x0.c: compilation warning fixLeonardo Potenza2008-02-23
| | | | | | | Suppress the warning message about the 'netcard_portlist' defined but not used. Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* virtio_net: Fix oops on early interrupts - introduced by virtio reset codeChristian Borntraeger2008-02-23
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* uli526x partially recognizing interfaceGrant Grundler2008-02-23
| | | | | | | | | | | | | | | | Patch fixes: http://bugzilla.kernel.org/show_bug.cgi?id=5839 Init sequence needs to poll phy until phy reset is complete. This is the same problem that I fixed in 2002 in tulip driver. Thanks to manty@manty.net for testing this patch. Thanks to Pozsar Balazs <pozsy@uhulinux.hu> for posting/testing a similar patch before: http://lkml.org/lkml/2006/8/21/45 Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* igb: fix legacy mode irq issueAndy Gospodarek2008-02-23
| | | | | | | | | | | | | | | | | | I booted an igb kernel with the option pci=nomsi and instantly noticed that interrupts no longer worked on my igb device. I took a look at the interrupt initialization and quickly discovered a comment stating: "DO NOT USE EIAME or IAME in legacy mode" It seemed a bit odd that bits to enable IAM were being set in legacy interrupt mode, so I dropped out the following parts and interrupts began working fine again. [Updated code flow and a nitpick spelling error --Auke] Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* fs_enet: Don't call phy_mii_ioctl() in atomic context.Scott Wood2008-02-23
| | | | | | | | The lock acquisition in fs_ioctl() does not appear to actually be necessary, and thus is simply removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ehea: add kdump supportThomas Klein2008-02-23
| | | | | | | | | | | | This patch adds kdump support to the ehea driver. As the firmware doesn't free resource handles automatically, the driver has to run an as simple as possible free resource function in case of a crash shutdown. The function iterates over two arrays freeing all resource handles which are stored there. The arrays are kept up-to-date during normal runtime. The crash handler fn is triggered by the recently introduced PPC crash shutdown reg/unreg functions. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'master' of ../linux-2.6/David S. Miller2008-02-23
|\
| * Merge branch 'merge' of ↵Linus Torvalds2008-02-21
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] pasemi: Remove warning in mpic_pasemi_msi.c [POWERPC] pasemi: Register i2c devices at boot [POWERPC] cell: fix spurious false return from spu_trap_data_{map,seg} [POWERPC] Fix warning in pseries/power.c [POWERPC] Fix bootwrapper builds with older gcc versions [POWERPC] Fix dt_mem_next_cell() to read the full address [POWERPC] Kill sparse warnings in kprobes [POWERPC] spufs: fix scheduler starvation by idle contexts [POWERPC] 44x: Add multiplatform defconfig [POWERPC] 44x: Fix Kconfig formatting [POWERPC] 4xx: Update defconfigs for 2.6.25 [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts [POWERPC] PPC440EP Interrupt Triggering and Level Settings [POWERPC] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table
| | * [POWERPC] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching tableStefan Roese2008-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the removal the the "rgmii-interface" device_type property from the dts files, the newemac driver needs an update to only rely on compatible property. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-02-19
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits) [NIU]: Bump driver version and release date. [NIU]: Fix BMAC alternate MAC address indexing. net: fix kernel-doc warnings in header files [IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route. [IPV6]: dst_entry leak in ip4ip6_err. (resend) bluetooth: do not move child device other than rfcomm bluetooth: put hci dev after del conn [NET]: Elminate spurious print_mac() calls. [BLUETOOTH] hci_sysfs.c: Kill build warning. [NET]: Remove MAC_FMT net/8021q/vlan_dev.c: Use print_mac. [XFRM]: Fix ordering issue in xfrm_dst_hash_transfer(). [BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros [IPV6]: Fix hardcoded removing of old module code [NETLABEL]: Move some initialization code into __init section. [NETLABEL]: Shrink the genl-ops registration code. [AX25] ax25_out: check skb for NULL in ax25_kick() [TCP]: Fix tcp_v4_send_synack() comment [IPV4]: fix alignment of IP-Config output Documentation: fix tcp.txt ...
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-02-15
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits) [NET]: Make sure sockets implement splice_read netconsole: avoid null pointer dereference at show_local_mac() [IPV6]: Fix reversed local_df test in ip6_fragment [XFRM]: Avoid bogus BUG() when throwing new policy away. [AF_KEY]: Fix bug in spdadd [NETFILTER] nf_conntrack_proto_tcp.c: Mistyped state corrected. net: xfrm statistics depend on INET [NETFILTER]: make secmark_tg_destroy() static [INET]: Unexport inet_listen_wlock [INET]: Unexport __inet_hash_connect [NET]: Improve cache line coherency of ingress qdisc [NET]: Fix race in dev_close(). (Bug 9750) [IPSEC]: Fix bogus usage of u64 on input sequence number [RTNETLINK]: Send a single notification on device state changes. [NETLABLE]: Hide netlbl_unlabel_audit_addr6 under ifdef CONFIG_IPV6. [NETLABEL]: Don't produce unused variables when IPv6 is off. [NETLABEL]: Compilation for CONFIG_AUDIT=n case. [GENETLINK]: Relax dances with genl_lock. [NETLABEL]: Fix lookup logic of netlbl_domhsh_search_def. [IPV6]: remove unused method declaration (net/ndisc.h). ...
| * | | mlx4_core: Move table_find from fmr_alloc to fmr_enableJack Morgenstein2008-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mlx4_table_find (for FMR MPTs) requires that ICM memory already be mapped. Before this fix, FMR allocation depended on ICM memory already being mapped for the MPT entry. If all currently mapped entries are taken, the find operation fails (even if the MPT ICM table still had more entries, which were just not mapped yet). This fix moves the mpt find operation to fmr_enable, to guarantee that any required ICM memory mapping has already occurred. Found by Oren Duer of Mellanox. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-20 22:04:47 -0500