aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-06-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tcp: Revert 'process defer accept as established' changes. ipv6: Fix duplicate initialization of rawv6_prot.destroy bnx2x: Updating the Maintainer net: Eliminate flush_scheduled_work() calls while RTNL is held. drivers/net/r6040.c: correct bad use of round_jiffies() fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUP ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ipg_nic_set_multicast_list() netfilter: nf_conntrack: fix ctnetlink related crash in nf_nat_setup_info() netfilter: Make nflog quiet when no one listen in userspace. ipv6: Fail with appropriate error code when setting not-applicable sockopt. ipv6: Check IPV6_MULTICAST_LOOP option value. ipv6: Check the hop limit setting in ancillary data. ipv6 route: Fix route lifetime in netlink message. ipv6 mcast: Check address family of gf_group in getsockopt(MS_FILTER). dccp: Bug in initial acknowledgment number assignment dccp ccid-3: X truncated due to type conversion dccp ccid-3: TFRC reverse-lookup Bug-Fix dccp ccid-2: Bug-Fix - Ack Vectors need to be ignored on request sockets dccp: Fix sparse warnings dccp ccid-3: Bug-Fix - Zero RTT is possible
| * bnx2x: Updating the MaintainerEilon Greenstein2008-06-12
| | | | | | | | | | | | | | | | | | | | I would like to thank Eliezer Tamir for writing and maintaining the driver for the past two years. I will take over maintaining the bnx2x driver from now on. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Eliminate flush_scheduled_work() calls while RTNL is held.David S. Miller2008-06-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the RTNL is held when we invoke flush_scheduled_work() we could deadlock. One such case is linkwatch, it is a work struct which tries to grab the RTNL semaphore. The most common case are net driver ->stop() methods. The simplest conversion is to instead use cancel_{delayed_}work_sync() explicitly on the various work struct the driver uses. This is an OK transformation because these work structs are doing things like resetting the chip, restarting link negotiation, and so forth. And if we're bringing down the device, we're about to turn the chip off and reset it anways. So if we cancel a pending work event, that's fine here. Some drivers were working around this deadlock by using a msleep() polling loop of some sort, and those cases are converted to instead use cancel_{delayed_}work_sync() as well. Signed-off-by: David S. Miller <davem@davemloft.net>
| * drivers/net/r6040.c: correct bad use of round_jiffies()Christophe Jaillet2008-06-11
| | | | | | | | | | | | | | | | Compared to other places in the kernel, I think that this driver misuses the function round_jiffies. Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUPRoel Kluin2008-06-11
| | | | | | | | | | | | | | | | | | | | Duplicate NETIF_MSG_IFDOWN, 2nd should be NETIF_MSG_IFUP Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Sylvain Munaut <tnt@246tNt.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ↵Roel Kluin2008-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ipg_nic_set_multicast_list() The branches are dead code. even when dev->flag IFF_MULTICAST (defined 0x1000) is set, dev->flags & IFF_MULTICAST & [boolean] always evaluates to 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-06-11
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) net: Fix routing tables with id > 255 for legacy software sky2: Hold RTNL while calling dev_close() s2io iomem annotations atl1: fix suspend regression qeth: start dev queue after tx drop error qeth: Prepare-function to call s390dbf was wrong qeth: reduce number of kernel messages qeth: Use ccw_device_get_id(). qeth: layer 3 Oops in ip event handler virtio: use callback on empty in virtio_net virtio: virtio_net free transmit skbs in a timer virtio: Fix typo in virtio_net_hdr comments virtio_net: Fix skb->csum_start computation ehea: set mac address fix sfc: Recover from RX queue flush failure add missing lance_* exports ixgbe: fix typo forcedeth: msi interrupts ipsec: pfkey should ignore events when no listeners pppoe: Unshare skb before anything else ...
| * Merge branch 'davem-fixes' of ↵David S. Miller2008-06-10
| |\ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| | * sky2: Hold RTNL while calling dev_close()Ben Hutchings2008-06-10
| | | | | | | | | | | | | | | | | | | | | dev_close() must be called holding the RTNL. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * s2io iomem annotationsAl Viro2008-06-10
| | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * atl1: fix suspend regressionJay Cliburn2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Using vendor magic to force the PHY into power save mode breaks suspend. It isn't needed anyway, so remove it. Tested-by: Avuton Olrich <avuton@gmail.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * virtio: use callback on empty in virtio_netRusty Russell2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio_net uses a timer to free old transmitted packets, rather than leaving callbacks enabled all the time. If the host promises to always notify us when the transmit ring is empty, we can free packets at that point and avoid the timer. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * virtio: virtio_net free transmit skbs in a timerMark McLoughlin2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio_net currently only frees old transmit skbs just before queueing new ones. If the queue is full, it then enables interrupts and waits for notification that more work has been performed. However, a side-effect of this scheme is that there are always xmit skbs left dangling when no new packets are sent, against the Documentation/networking/driver.txt guideline: "... it is not allowed for your TX mitigation scheme to let TX packets "hang out" in the TX ring unreclaimed forever if no new TX packets are sent." Add a timer to ensure that any time we queue new TX skbs, we will shortly free them again. This fixes an easily reproduced hang at shutdown where iptables attempts to unload nf_conntrack and nf_conntrack waits for an skb it is tracking to be freed, but virtio_net never frees it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * virtio_net: Fix skb->csum_start computationMark McLoughlin2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hdr->csum_start is the offset from the start of the ethernet header to the transport layer checksum field. skb->csum_start is the offset from skb->head. skb_partial_csum_set() assumes that skb->data points to the ethernet header - i.e. it computes skb->csum_start by adding the headroom to hdr->csum_start. Since eth_type_trans() skb_pull()s the ethernet header, skb_partial_csum_set() should be called before eth_type_trans(). (Without this patch, GSO packets from a guest to the world outside the host are corrupted). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * ehea: set mac address fixJan-Bernd Themann2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * sfc: Recover from RX queue flush failureSteve Hodgson2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | RX queue flush can fail if traffic continues to arrive. Recover by performing an invisible reset. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * add missing lance_* exportsAdrian Bunk2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1203 modules ERROR: "lance_open" [drivers/net/mvme147.ko] undefined! ERROR: "lance_close" [drivers/net/mvme147.ko] undefined! ERROR: "lance_tx_timeout" [drivers/net/mvme147.ko] undefined! ERROR: "lance_set_multicast" [drivers/net/mvme147.ko] undefined! ERROR: "lance_start_xmit" [drivers/net/mvme147.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * ixgbe: fix typoJeff Kirsher2008-06-10
| | | | | | | | | | | | | | | | | | | | | Define names were accidently transposed. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * forcedeth: msi interruptsAyaz Abdulla2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a workaround for lost MSI interrupts. There is a race condition in the HW in which future interrupts could be missed. The workaround is to toggle the MSI irq mask. Added cleanup based on comments from Andrew Morton. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | pppoe: Unshare skb before anything elseHerbert Xu2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | We need to unshare the skb first as otherwise pskb_may_pull may write to a shared skb which could be bad. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net pppoe: Check packet length on all receive pathsHerbert Xu2008-06-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | l2tp: Fix potential memory corruption in pppol2tp_recvmsg()James Chapman2008-06-10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a potential memory corruption in pppol2tp_recvmsg(). If skb->len is bigger than the caller's buffer length, memcpy_toiovec() will go into unintialized data on the kernel heap, interpret it as an iovec and start modifying memory. The fix is to change the memcpy_toiovec() call to skb_copy_datagram_iovec() so that paged packets (rare for PPPOL2TP) are handled properly. Also check that the caller's buffer is big enough for the data and set the MSG_TRUNC flag if it is not so. Reported-by: Ilja <ilja@netric.org> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * irda: net/irda build fix: mcs7780Ingo Molnar2008-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -tip testing found the following build error: drivers/built-in.o: In function `mcs_receive_irq': mcs7780.c:(.text+0x4e429): undefined reference to `crc32_le' drivers/built-in.o: In function `mcs_hard_xmit': mcs7780.c:(.text+0x4e9af): undefined reference to `crc32_le' with: http://redhat.com/~mingo/misc/config-Sun_Jun__8_22_56_14_CEST_2008.bad the reason is a missing enablement of the CRC32 library in the Kconfig. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tg3: Update version to 3.92.1Matt Carlson2008-06-09
| | | | | | | | | | | | | | | | This patch increments the version to 3.92.1. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tg3: Fix 5761 WOLMatt Carlson2008-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 5761 non-e devices, two problems prevent the administrator from overriding the WOL settings in the device's NVRAM. The first problem is that GPIO 0 and GPIO 2 have been swapped. This change prevented the administrator from turning on WOL when it is disabled in NVRAM. The fix is to add a new path for the 5761 that swaps the two GPIOs in the code as well. The second problem is that GPIO 1 could not be toggled by the driver because the GPIO is shared with the debug UART GPIO. This will prevent the administrator from being able to turn WOL off if it was enabled in NVRAM. The fix is to always disable the debug UART after a GRC reset. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tg3: Fix a flags typoMatt Carlson2008-06-09
| | | | | | | | | | | | | | | | | | This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was testing against the wrong flags variable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tg3: Fix 5714S / 5715S / 5780S link failuresMatt Carlson2008-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The git commit ef167e27039eeaea6d3cdd5c547b082e89840bdd entitled "Fix supporting flowctrl code" introduced a bug that prevents 5714S, 5715S and 5780S devices from falling back to a forced link mode. The problem is that the added flow control check will always fail if flow control is set to autoneg and either RX or TX (or both) flow control is enabled. The driver defaults to setting flow control to autoneg and advertises both RX and TX flow control. The fix is to remove the errant check. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * iwlwifi: fix oops in iwl3945_led_brightness_setMarcin Slusarz2008-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix race between: ieee80211_open->ieee80211_led_radio->led_trigger_event->led_set_brightness->iwl3945_led_brightness_set (which assumes that "led->priv" is not NULL) and iwl3945_pci_probe->iwl3945_setup_deferred_work->(...)->iwl3945_bg_alive_start->iwl3945_alive_start->iwl3945_led_register->iwl3945_led_register_led which sets priv field in struct iwl3945_led after led->led_dev.brightness_set = iwl3945_led_brightness_set; (...) led_classdev_register(device, &led->led_dev); http://kerneloops.org/guilty.php?guilty=iwl3945_led_brightness_set&version=2.6.25-release&start=1671168&end=1703935&class=oops Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: linux-wireless@vger.kernel.org Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * zd1211rw: Fix data padding for QoSMichael Buesch2008-06-09
| | | | | | | | | | | | | | | | | | This patch fixes a data alignment issue in the zd1211rw driver. The IEEE80211_STYPE_QOS_DATA bit should be used as a bitwise test to test for the presence of the 2 byte QoS control field. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * libertas: fix sleep confirmationHolger Schurig2008-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes an issus that made "iwconfig eth1 power on" non-working. When we get a "PS sleep" event, we have to confirm this to the firmware. The confirm happens with a command, but this command is special: the firmware won't send us a response. if_cs_host_to_card() is setting priv->dnld_sent anyway, so this variable stayed at DNLD_DATA_SENT and was never cleared back. Now I put the special knowledge that the CMD_802_11_PS_MODE with CMD_SUBCMD_SLEEP_CONFIRMED doesn't need to need a response by directly clearing the dnld_sent state in lbs_send_confirmsleep(). Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ipw2200: queue direct scansDan Williams2008-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When another scan is in progress, a direct scan gets dropped on the floor. However, that direct scan is usually the scan that's really needed by userspace, and gets stomped on by all the broadcast scans the ipw2200 driver issues internally. Make sure the direct scan happens eventually, and as a bonus ensure that the passive scan worker is cleaned up when appropriate. The change of request_passive_scan form a struct work to struct delayed_work is only to make the set_wx_scan() code a bit simpler, it's still only used with a delay of 0 to match previous behavior. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | smc91x: fix build error from the SMC_GET_MAC_ADDR API changeBryan Wu2008-06-11
| | | | | | | | | | | | | | Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [POWERPC] ehea: Remove dependency on MEMORY_HOTPLUGNathan Lynch2008-06-08
| | | | | | | | | | | | | | | | | | | | Now that walk_memory_resource() is available regardless of MEMORY_HOTPLUG's setting, this dependency is not needed. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-06-04
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) l2tp: Fix possible oops if transmitting or receiving when tunnel goes down tcp: Fix for race due to temporary drop of the socket lock in skb_splice_bits. tcp: Increment OUTRSTS in tcp_send_active_reset() raw: Raw socket leak. lt2p: Fix possible WARN_ON from socket code when UDP socket is closed USB ID for Philips CPWUA054/00 Wireless USB Adapter 11g ssb: Fix context assertion in ssb_pcicore_dev_irqvecs_enable libertas: fix command size for CMD_802_11_SUBSCRIBE_EVENT ipw2200: expire and use oldest BSS on adhoc create airo warning fix b43legacy: Fix controller restart crash sctp: Fix ECN markings for IPv6 sctp: Flush the queue only once during fast retransmit. sctp: Start T3-RTX timer when fast retransmitting lowest TSN sctp: Correctly implement Fast Recovery cwnd manipulations. sctp: Move sctp_v4_dst_saddr out of loop sctp: retran_path update bug fix tcp: fix skb vs fack_count out-of-sync condition sunhme: Cleanup use of deprecated calls to save_and_cli and restore_flags. xfrm: xfrm_algo: correct usage of RIPEMD-160 ...
| * l2tp: Fix possible oops if transmitting or receiving when tunnel goes downJames Chapman2008-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some problems have been experienced in the field which cause an oops in the pppol2tp driver if L2TP tunnels fail while passing data. The pppol2tp driver uses private data that is referenced via the sk->sk_user_data of its UDP and PPPoL2TP sockets. This patch makes sure that the driver uses sock_hold() when it holds a reference to the sk pointer. This affects its sendmsg(), recvmsg(), getname(), [gs]etsockopt() and ioctl() handlers. Tested by ISP where problem was seen. System has been up 10 days with no oops since running this patch. Without the patch, an oops would occur every 1-2 days. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * lt2p: Fix possible WARN_ON from socket code when UDP socket is closedJames Chapman2008-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an L2TP daemon closes a tunnel socket while packets are queued in the tunnel's reorder queue, a kernel warning is logged because the socket is closed while skbs are still referencing it. The fix is to purge the queue in the socket's release handler. WARNING: at include/net/sock.h:351 udp_lib_unhash+0x41/0x68() Pid: 12998, comm: openl2tpd Not tainted 2.6.25 #8 [<c0423c58>] warn_on_slowpath+0x41/0x51 [<c05d33a7>] udp_lib_unhash+0x41/0x68 [<c059424d>] sk_common_release+0x23/0x90 [<c05d16be>] udp_lib_close+0x8/0xa [<c05d8684>] inet_release+0x42/0x48 [<c0592599>] sock_release+0x14/0x60 [<c059299f>] sock_close+0x29/0x30 [<c046ef52>] __fput+0xad/0x15b [<c046f1d9>] fput+0x17/0x19 [<c046c8c4>] filp_close+0x50/0x5a [<c046da06>] sys_close+0x69/0x9f [<c04048ce>] syscall_call+0x7/0xb Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵David S. Miller2008-06-04
| |\ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * USB ID for Philips CPWUA054/00 Wireless USB Adapter 11gFelix Homann2008-06-04
| | | | | | | | | | | | | | | | | | | | | | | | Enable the Philips CPWUA054/00 in p54usb. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * libertas: fix command size for CMD_802_11_SUBSCRIBE_EVENTHolger Schurig2008-06-04
| | | | | | | | | | | | | | | | | | | | | The size was two small by two bytes. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ipw2200: expire and use oldest BSS on adhoc createDan Williams2008-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there are no networks on the free list, expire the oldest one when creating a new adhoc network. Because ipw2200 and the ieee80211 stack don't actually cull old networks and place them back on the free list unless they are needed for new probe responses, over time the free list would become empty and creating an adhoc network would fail due to the ! list_empty(...) check. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * airo warning fixAndrew Morton2008-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: space prohibited between function name and open parenthesis '(' #22: FILE: drivers/net/wireless/airo.c:2907: + while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { total: 0 errors, 1 warnings, 8 lines checked ./patches/wireless-airo-waitbusy-wont-delay.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Dan Williams <dcbw@redhat.com> Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43legacy: Fix controller restart crashMichael Buesch2008-06-04
| | | | | | | | | | | | | | | | | | | | | | | | This fixes a kernel crash on rmmod, in the case where the controller was restarted before doing the rmmod. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | sunhme: Cleanup use of deprecated calls to save_and_cli and restore_flags.Mark Asselstine2008-06-04
| | | | | | | | | | | | | | | | | | | | | | | | Make use of local_irq_save and local_irq_restore rather then the deprecated save_and_cli and restore_flags calls. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'davem-fixes' of ↵David S. Miller2008-06-04
| |\ \ | | |/ | |/| | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| | * [netdrvr] tulip: oops in tulip_interrupt when hibernating with swsusp/suspend2Grant Grundler2008-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch is seems to fix the tulip suspend/resume panic: http://bugzilla.kernel.org/show_bug.cgi?id=8952#c46 My attempts at a cleaner patch failed and Pavel thinks this is OK. Original from: kernelbugs@tap.homeip.net Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * atl1: fix 4G memory corruption bugAlexey Dobriyan2008-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using 4+ GB RAM and SWIOTLB is active, the driver corrupts memory by writing an skb after the relevant DMA page has been unmapped. Although this doesn't happen when *not* using bounce buffers, clearing the pointer to the DMA page after unmapping it fixes the problem. http://marc.info/?t=120861317000005&r=2&w=2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * ucc_geth_ethtool: Add a missing HW stats counterLi Yang2008-05-30
| | | | | | | | | | | | | | | | | | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * ucc_geth_ethtool: Fix typoJoakim Tjernlund2008-05-30
| | | | | | | | | | | | | | | | | | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * virtio: fix delayed xmit of packet and freeing of old packets.Rusty Russell2008-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because we cache the last failed-to-xmit packet, if there are no packets queued behind that one we may never send it (reproduced here as TCP stalls, "cured" by an outgoing ping). Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * virtio: fix virtio_net xmit of freed skb bugRusty Russell2008-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we fail to transmit a packet, we assume the queue is full and put the skb into last_xmit_skb. However, if more space frees up before we xmit it, we loop, and the result can be transmitting the same skb twice. Fix is simple: set skb to NULL if we've used it in some way, and check before sending. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-17 10:34:36 -0500