aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* rt2x00: Replace statically allocated DMA buffers with mapped skb's.Gertjan van Wingerde2008-06-26
| | | | | | | | | | | | | The current PCI drivers require a lot of pre-allocated DMA buffers. Reduce this by using dynamically mapped skb's (using pci_map_single) instead of the pre- allocated DMA buffers that are allocated at device start-up time. At the same time move common RX path code into rt2x00lib from rt2x00pci and rt2x00usb, as the RX paths now are now almost the same. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Centralize allocation of RX skbs.Gertjan van Wingerde2008-06-26
| | | | | | | | | | In preparation of replacing the statically allocated DMA buffers with dynamically mapped skbs, centralize the allocation of RX skbs to rt2x00queue.c and let rt2x00pci already use them. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Convert rt2x00 to use generic DMA-mapping APIGertjan van Wingerde2008-06-26
| | | | | | | | | | | | At the same time clean up the device administration a bit, by storing a pointer to struct device instead of a void pointer that is dependent on the type of device. The normal PCI and USB subsystem provided macros can be used to convert the device pointer to the right type. This makes the rt2x00 driver a bit more type-safe. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Properly clean up beacon skbs.Gertjan van Wingerde2008-06-26
| | | | | | | | | The skbs containing the beacons weren't properly cleaned up for rt2400pci, rt2500pci, rt61pci, and rt73usb. Clean up those skbs in the manner appropriate for each driver. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Use ieee80211 fc handlersIvo van Doorn2008-06-26
| | | | | | | | | | With the introduction of the ieee80211 fc handlers we can now remove the rt2x00.h versions to use the global versions. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: fix fallout from device_create removalStephen Rothwell2008-06-26
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43legacy: use frame control helpersHarvey Harrison2008-06-26
| | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: use frame control helpersHarvey Harrison2008-06-26
| | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* zd1211rw: use frame control helpersHarvey Harrison2008-06-26
| | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: use frame control helpersHarvey Harrison2008-06-26
| | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* remove the strip driverAdrian Bunk2008-06-26
| | | | | | | | | | | | | | | The latest trace about usage of this driver I found was an (unanswered) request for help by a user trying to get it working reliably five years ago with kernel 2.4 . And even if it was still working the use cases of this driver (requiring both the hardware and someone providing this kind of wireless network) have become practically nonexisting. This patch therefore removes the strip driver. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/wireless-2.6John W. Linville2008-06-25
|\
| * wext: Emit event stream entries correctly when compat.David S. Miller2008-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Three major portions to this change: 1) Add IW_EV_COMPAT_LCP_LEN, IW_EV_COMPAT_POINT_OFF, and IW_EV_COMPAT_POINT_LEN helper defines. 2) Delete iw_stream_check_add_*(), they are unused. 3) Add iw_request_info argument to iwe_stream_add_*(), and use it to size the event and pointer lengths correctly depending upon whether IW_REQUEST_FLAG_COMPAT is set or not. 4) The mechanical transformations to the drivers and wireless stack bits to get the iw_request_info passed down into the routines modified in #3. Also, explicit references to IW_EV_LCP_LEN are replaced with iwe_stream_lcp_len(info). With a lot of help and bug fixes from Masakazu Mokuno. Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Update versionEilon Greenstein2008-06-23
| | | | | | | | | | | | | | Updating to version 1.45.6 Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Add PCIE EEH supportWendy Xiong2008-06-23
| | | | | | | | | | | | | | | | | | Add PCI recovery functions to the driver. The initial PCI state is also saved so the MSI state can be restored during PCI recovery. Signed-off-by: Wendy Xiong <wendyx@us.ibm.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Enhanced self testYitchak Gertner2008-06-23
| | | | | | | | | | | | | | | | | | Added registers, memories, loopback, nvram, interrupt and link tests to the self-test Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Re-factor Tx codeEilon Greenstein2008-06-23
| | | | | | | | | | | | | | | | | | | | Add support for IPv6 TSO Re-factor the Tx code with smaller functions to increase readability. Add linearization code in case packet is too fragmented for the microcode to handle. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Add TPA, Broadcoms HW LROVladislav Zolotarov2008-06-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TPA stands for Transparent Packet Aggregation. When enabled, the FW aggregate in-order TCP packets according to the 4-tuple match and sends 1 big packet to the driver. This packet is stored on an SGL in which each SGE is 1 page. The FW also implements a timeout algorithm and it honors all TCP flag, including the push flag as a trigger to halt aggregation. After receiving Ben Hutchings comments, we also added ethtool support, so now, thanks to Ben's patch, when forwarding is enabled, our aggregation is turned off using the LRO flags. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: New statistics codeYitchak Gertner2008-06-23
| | | | | | | | | | | | | | | | | | | | To avoid race conditions with link up/down and driver up/down - the statistics handling was re-written in a form of state machine. Also supporting statistics for 57711 Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Add support for BCM57711 HWEilon Greenstein2008-06-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supporting the 57711 and 57711E - refers to in the code as E1H. The 57710 is referred to as E1. To support the new members in the family, the bnx2x structure was divided to 3 parts: common, port and function. These changes caused some rearrangement in the bnx2x.h file. A set of accessories macros were added to make access to the bnx2x structure more readable Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: New microcode part 3/3Eilon Greenstein2008-06-23
| | | | | | | | | | | | | | | | The new Microcode BLOB - broken into a separate patch to make it small enough for the mailing list Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: New microcode part 2/3Eilon Greenstein2008-06-23
| | | | | | | | | | | | | | | | The new Microcode BLOB - broken into a separate patch to make it small enough for the mailing list Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: New microcode part 1/3Eilon Greenstein2008-06-23
| | | | | | | | | | | | | | | | The new Microcode BLOB - broken into a separate patch to make it small enough for the mailing list Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Remove old microcodeEilon Greenstein2008-06-23
| | | | | | | | | | | | | | | | Removing the old Microcode from the BLOB - broken into a separate patch to make it small enough for the mailing list Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: New init infrastructureEilon Greenstein2008-06-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new initialization code supports the 57711 HW. It also supports the emulation and FPGA for the 57711 and 57710 initializations values (very small amount of code which is very helpful in the lab - less than 30 lines). The initialization is done via DMAE after the DMAE block is ready - before it is ready, some of the initialization is done via PCI configuration transactions (referred to as indirect write). A mutex to protect the DMAE from being overlapped was added. There are few new registers which needs to be initialized by SW - the full comment for those registers is added to the register file. A place holder for the 57711 (referred to as E1H) microcode was added- the microcode itself is too big and it is split over the following 4 patches Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: New link codeYaniv Rosner2008-06-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New Link code: Moving all the link related code (including the calculations, the initialization of the MAC and PHY and the external PHY's code) into a separated file. The changes from the code that used to be part of bnx2x.c (now called bnx2x_main.c) are: - Using separate structures for link inputs and link outputs to clearly identify what was configured and what is the outcome - Adding code to read external PHY FW version and print it as part of ethtool -i - Adding code to upgrade external PHY FW from ethtool -E with special magic number - Changing the link down indication to ERR level - Adding a lock on all PHY access to prevent an interrupt and setting changes to overlap - Adding support for emulation and FPGA (small chunk of code that really helps in the lab) - Adding support for 1G on BCM8706 PHY - Adding clear debug print incase of fan failure (the PHY type is now "failure") Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Adding bnx2x_linkYaniv Rosner2008-06-23
| | | | | | | | | | | | | | | | | | | | This patch is int the new bnx2x_link files (C and H). The files are still not used in this patch, only in the next one so the patch will be small enough for the mailing list. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilong Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Rename bnx2x.c to bnx2x_main.cEilon Greenstein2008-06-23
| | | | | | | | | | | | | | This patch is the rename of bnx2x.c to bnx2x_main.c. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Update driver version to 1.7.7.Michael Chan2008-06-19
| | | | | | | | | | | | | | | | And update module description. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Cleanup error handling in bnx2_open().Michael Chan2008-06-19
| | | | | | | | | | | | | | | | All error handling in bnx2_open() can be consolidated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Turn on multi rx rings.Michael Chan2008-06-19
| | | | | | | | | | | | | | | | | | Enable multiple rx rings if MSI-X vectors are available. We enable up to 7 rx rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Update firmware to support multi rx rings.Michael Chan2008-06-19
| | | | | | | | | | | | Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Use one handler for all MSI-X vectors.Michael Chan2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the same MSI-X handler to schedule NAPI. Change the dev_instance void pointer to the bnx2_napi struct instead so we can have the proper context for each MSI-X vector. Add a new bnx2_poll_msix() that is optimized for handling MSI-X NAPI polling of rx/tx work only. Remove the old bnx2_tx_poll() that is no longer needed. Each MSI-X vector handles 1 tx and 1 rx ring. The first vector handles link events as well. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Optimize fast-path tx and rx work.Michael Chan2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add hw_tx_cons_ptr and hw_rx_cons_ptr to speed up the retreival of the tx and rx consumer index, since the MSI-X and default status blocks have different structures. Combine status_blk and status_blk_msix into a union. We'll only use one type of status block for each vector. Separate the code to detect more rx and tx work from the code to detect link related work. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Put rx ring variables in a separate struct.Michael Chan2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for multi-ring support, rx ring variables are now put in a separate bnx2_rx_ring_info struct. With MSI-X, we can support multiple rx rings. The functions to allocate/free rx memory and to initialize rx rings are now modified to handle multiple rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2: Put tx ring variables in a separate struct.Michael Chan2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for multi-ring support, tx ring variables are now put in a separate bnx2_tx_ring_info struct. Multi tx ring will not be enabled until it is fully supported by the stack. Only 1 tx ring will be used at the moment. The functions to allocate/free tx memory and to initialize tx rings are now modified to handle multiple rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2008-06-19
|\ \ | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/tx.c
| * \ Merge branch 'davem-fixes' of ↵David S. Miller2008-06-18
| |\ \ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| | * | atl1: relax eeprom mac address error checkRadu Cristescu2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu <advantis@gmx.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | net/enc28j60: low power modeDavid Brownell2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | net/enc28j60: section fixDavid Brownell2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | sky2: 88E8040T pci device idStephen Hemminger2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | netxen: download firmware in pci probeDhananjay Phadke2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | netxen: cleanup debug messagesDhananjay Phadke2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | netxen: remove global physical_port arrayDhananjay Phadke2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | netxen: fix portnum for hp mezz cardsDhananjay Phadke2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| | * | ibm_newemac: select CRC32 in KconfigJosh Boyer2008-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is setAng Way Chuang2008-06-18
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | bonding: Allow setting max_bonds to zeroJay Vosburgh2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Permit bonding to function rationally if max_bonds is set to zero. This will load the module, but create no master devices (which can be created via sysfs). Requires some change to bond_create_sysfs; currently, the netdev sysfs directory is determined from the first bonding device created, but this is no longer possible. Instead, an interface from net/core is created to create and destroy files in net_class. Based on a patch submitted by Phil Oester <kernel@linuxaces.com>. Modified by Jay Vosburgh to fix the sysfs issue mentioned above and to update the documentation. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | | bonding: Rework / fix multiple gratuitous ARP supportJay Vosburgh2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for sending multiple gratuitous ARPs during failovers was added by commit: commit 7893b2491a2d5f716540ac5643d78d37a7f6628b Author: Moni Shoua <monis@voltaire.com> Date: Sat May 17 21:10:12 2008 -0700 bonding: Send more than one gratuitous ARP when slave takes over This change modifies that support to remove duplicated code, add support for ARP monitor (the original only supported miimon), clear the grat ARP counter in bond_close (lest a later "ifconfig up" immediately start spewing ARPs), and add documentation for the module parameter. Also updated driver version to 3.3.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-22 07:04:27 -0500