aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* drivers/net: ks8851_mll ethernet network driverChoi, David2009-09-30
| | | | | | | | | This is the first registration of ks8851 network driver with MLL(address/data multiplexed) interface. Signed-off-by : David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* skge: Make sure both ports initialize correctlyMike McCormack2009-09-30
| | | | | | | | | | | | If allocation of the second ports fails, make sure that hw->ports is not 2 otherwise we'll crash trying to access the second port. This fix is copied from a similar fix in the sky2 driver (ca519274...), but is untested, as I don't have a skge card. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bcm63xx_enet: timeout off by one in do_mdio_op()roel kluin2009-09-30
| | | | | | | | `while (limit-- >= 0)' reaches -2 after the loop upon timeout. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix error exit for probe call.Ron Mercer2009-09-30
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Protect reset recovery with rtnl_lock().Ron Mercer2009-09-30
| | | | | | | | | Move the call to rtnl_lock() to before the internal call to ql_adapter_down()/ql_adapter_up(). This prevents collisions that can happen when recovering from an asic error. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix spin_lock warning.Ron Mercer2009-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the unnecessary locking around the call to ql_adapter_reset(). Sep 25 08:17:29 localhost kernel: SOFTIRQ-ON-W at: Sep 25 08:17:29 localhost kernel: [<c0000000000a2964>] .lock_acquire+0x10c/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000004542e0>] ._spin_lock+0x34/0x58 Sep 25 08:17:29 localhost kernel: [<d000000006723070>] .ql_adapter_down+0x40c/0x4a0 [qlge] Sep 25 08:17:29 localhost kernel: [<d0000000067256d8>] .qlge_close+0x38/0x58 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000003ada6c>] .dev_close+0xdc/0x118 Sep 25 08:17:29 localhost kernel: [<c0000000003adb48>] .rollback_registered+0xa0/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000003adc50>] .unregister_netdevice+0x50/0x7c Sep 25 08:17:29 localhost kernel: [<c0000000003adca0>] .unregister_netdev+0x24/0x40 Sep 25 08:17:29 localhost kernel: [<d00000000672e0c0>] .qlge_remove+0x28/0x64 [qlge] Sep 25 08:17:29 localhost kernel: [<c000000000253fdc>] .pci_device_remove+0x50/0x90 Sep 25 08:17:29 localhost kernel: [<c0000000002f5434>] .__device_release_driver+0x94/0xf8 Sep 25 08:17:29 localhost kernel: [<c0000000002f5560>] .driver_detach+0xc8/0xfc Sep 25 08:17:29 localhost kernel: [<c0000000002f3fd8>] .bus_remove_driver+0xb4/0x114 Sep 25 08:17:29 localhost kernel: [<c0000000002f5d4c>] .driver_unregister+0x80/0xa4 Sep 25 08:17:29 localhost kernel: [<c00000000025421c>] .pci_unregister_driver+0x50/0xc8 Sep 25 08:17:29 localhost kernel: [<d00000000672e044>] .qlge_exit+0x1c/0x34 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000000ac8b0>] .SyS_delete_module+0x234/0x2d0 Sep 25 08:17:29 localhost kernel: [<c000000000008554>] syscall_exit+0x0/0x40 Sep 25 08:17:29 localhost kernel: INITIAL USE at: Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix out of sync hardware semaphore.Ron Mercer2009-09-30
| | | | | | | | | ql_clear_routing_entries() takes/gives it's own hardware semaphore since it is called from more than one place. ql_route_initialize() should make this call and THEN take it's own semaphore before doing it's work. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix bad bit definitions.Ron Mercer2009-09-30
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Remove ATR computation for UDP trafficPeter P Waskiewicz Jr2009-09-30
| | | | | | | | | | | | | ATR support for UDP on 82599 needs to be redesigned, since the current model doesn't make much sense. The fallout from having it in though is it causes all UDP traffic to still compute the ATR hashes on transmit, which are useless. This removal will return upwards of 10% of relative computational overhead in forwarding tests. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe patch to provide NIC's tx/rx counters via ethtoolBen Greear2009-09-30
| | | | | | | | | | | | | | When LRO is enabled, the received packet and byte counters represent the LRO'd packets, not the packets/bytes on the wire. The Intel 82599 NIC has registers that keep count of the physical packets. Add these counters to the ethtool stats. The byte counters are 36-bit, but the high 4 bits were being ignored in the 2.6.31 ixgbe driver: Read those as well to allow longer time between polling the stats to detect wraps. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Bump driver version numberPeter P Waskiewicz Jr2009-09-30
| | | | | | | | | A number of changes have gone in since the last version bump. Bump it to reflect the changes. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Fix backplane flow control autonegPeter P Waskiewicz Jr2009-09-30
| | | | | | | | | | Backplane flow control autonegotiation is currently broken for ixgbe devices. This patch fixes the flow control issues with clause 37 autoneg. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Fix disabling of relaxed ordering with Tx DCAPeter P Waskiewicz Jr2009-09-30
| | | | | | | | | | | | | 82599 has a different register offset for the Tx DCA control registers. We disable relaxed ordering of the descriptor writebacks for Tx head writeback, but didn't disable it properly for 82599. However, this shouldn't be a visible issue, since ixgbe doesn't use Tx head writeback. This patch just makes sure we're not doing blind writes to offsets we don't expect. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Make setsockopt() optlen be unsigned.David S. Miller2009-09-30
| | | | | | | | | | | | This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
* iwlwifi: fix 3945 ucode info retrieval after failureReinette Chatre2009-09-28
| | | | | | | | | | | | | | | | | When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix memory leak in command queue handlingReinette Chatre2009-09-28
| | | | | | | | Also free the array of command pointers and meta data of each command buffer when command queue is freed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix debugfs buffer handlingReinette Chatre2009-09-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We keep track of where to write into a buffer by keeping a count of how much has been written so far. When writing to the buffer we thus take the buffer pointer and adding the count of what has been written so far. Keeping track of what has been written so far is done by incrementing this number every time something is written to the buffer with how much has been written at that time. Currently this number is incremented incorrectly when using the "hex_dump_to_buffer" call to add data to the buffer. Fix this by only adding what has been added to the buffer in that call instead of what has been added since beginning of buffer. Issue was discovered and discussed during testing of https://bugzilla.redhat.com/show_bug.cgi?id=464598 . When a user views any of these files they will see something like: [ 179.355202] ------------[ cut here ]------------ [ 179.355209] WARNING: at ../lib/vsprintf.c:989 vsnprintf+0x5ec/0x5f0() [ 179.355212] Hardware name: VGN-Z540N [ 179.355213] Modules linked in: i915 drm i2c_algo_bit i2c_core ipv6 acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_conservative cpufreq_stats freq_table container sbs sbshc arc4 ecb iwlagn iwlcore joydev led_class mac80211 af_packet pcmcia psmouse sony_laptop cfg80211 iTCO_wdt iTCO_vendor_support pcspkr serio_raw rfkill intel_agp video output tpm_infineon tpm tpm_bios button battery yenta_socket rsrc_nonstatic pcmcia_core processor ac evdev ext3 jbd mbcache sr_mod sg cdrom sd_mod ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal fan thermal_sys [ 179.355262] Pid: 5449, comm: cat Not tainted 2.6.31-wl-54419-ge881071 #62 [ 179.355264] Call Trace: [ 179.355267] [<ffffffff811ad14c>] ? vsnprintf+0x5ec/0x5f0 [ 179.355271] [<ffffffff81041348>] warn_slowpath_common+0x78/0xd0 [ 179.355275] [<ffffffff810413af>] warn_slowpath_null+0xf/0x20 [ 179.355277] [<ffffffff811ad14c>] vsnprintf+0x5ec/0x5f0 [ 179.355280] [<ffffffff811ad23d>] ? scnprintf+0x5d/0x80 [ 179.355283] [<ffffffff811ad23d>] scnprintf+0x5d/0x80 [ 179.355286] [<ffffffff811aed29>] ? hex_dump_to_buffer+0x189/0x340 [ 179.355290] [<ffffffff810e91d7>] ? __kmalloc+0x207/0x260 [ 179.355303] [<ffffffffa02a02f8>] iwl_dbgfs_nvm_read+0xe8/0x220 [iwlcore] [ 179.355306] [<ffffffff811a9b62>] ? __up_read+0x92/0xb0 [ 179.355310] [<ffffffff810f0988>] vfs_read+0xc8/0x1a0 [ 179.355313] [<ffffffff810f0b50>] sys_read+0x50/0x90 [ 179.355316] [<ffffffff8100bd6b>] system_call_fastpath+0x16/0x1b [ 179.355319] ---[ end trace 2383d0d5e0752ca0 ]--- Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* e1000: cleanup unused prototypeDon Skidmore2009-09-26
| | | | | | | | | | The function e1000_enable_tx_pkt_filtering() was removed in a previous cleanup patch. this removes the no longer used prototype. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: fix namespacecheck warningsJesse Brandeburg2009-09-26
| | | | | | | | | a couple of functions needed to be removed/declared static Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: drop unused functionality for eeprom write/readJesse Brandeburg2009-09-26
| | | | | | | | | eerd and eewr don't exist on pre PCIe devices Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: updated whitespace and commentsJesse Brandeburg2009-09-26
| | | | | | | | | | A large whitespace change to e1000_hw.[ch] in order to update it to kernel coding style (by running lindent). Updated function header comments into kdoc style. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: drop redunant line of code, cleanupJesse Brandeburg2009-09-26
| | | | | | | | | | adapter was being assigned twice, also clarified variable name and unwrapped line. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: remove races when changing mtuJesse Brandeburg2009-09-26
| | | | | | | | | | | this patch fixes a bug that occurs when routing packets and simultaneously changing the mtu. the rx_buffer_len variable is used during the rx cleanup and if that changes on the fly without stopping traffic bad things happen Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: two workarounds were incomplete, fix themJesse Brandeburg2009-09-26
| | | | | | | | | | | | 1) 82544 does not need last_tx_tso workaround, it interferes with the 82544 workaround too 2) 82544 hang workaround was using the address of the page struct instead of the physical address as its "workaround decider" not sure how that ever worked Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: fix tx waking queue after queue stopped during shutdownJesse Brandeburg2009-09-26
| | | | | | | | | | This fix closes a race where the adapter can be shutting down while hard_start_xmit is being called and interrupts are being handled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: test link state conclusivelyJesse Brandeburg2009-09-26
| | | | | | | | | | | e1000 was using one particular way to detect link, but with the advent of some of the newer hardware designs using SERDES connections, tests for link must completely cover all cases. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: stop timers at appropriate timesJesse Brandeburg2009-09-26
| | | | | | | | | | | there were some hotplug cases that made timers still run after the driver had been removed, make sure to stop all the timers and not allow racy reschedules. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: use netif_tx_disableJesse Brandeburg2009-09-26
| | | | | | | | | we can use netif_tx_disable now because LLTX has been removed. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: remove unused functionsJesse Brandeburg2009-09-26
| | | | | | | | | after removal of pcie, need to remove some unnecessary functions Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000: drop dead pcie code from e1000Jesse Brandeburg2009-09-26
| | | | | | | | | | | | | this patch is the first in a series of clean up patches for e1000 to drop unused code, and update the driver to kernel spec, and then, to update the driver to have all available bug fixes. Call it the e1000 weight loss plan. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* at91_can: Forgotten git 'add' of at91_can.cDavid S. Miller2009-09-25
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* TI Davinci EMAC: Fix in vector definition for EMAC_VERSION_2Sriram2009-09-25
| | | | | | | | | | In the emac_poll function when looking for interrupt status masks correct definition must be chosen based on EMAC_VERSION(the bit mask has changed from version 1 to version 2). Signed-off-by: Sriram <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-09-25
|\ | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-davem
| * virtio_net: Check for room in the vq before adding bufferAmit Shah2009-09-23
| | | | | | | | | | | | | | Saves us one cycle of alloc-add-free if the queue was full. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (modified)
| * virtio_net: avoid (most) NETDEV_TX_BUSY by stopping queue early.Rusty Russell2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we can tell the theoretical capacity remaining in the output queue, virtio_net can waste entries by stopping the queue early. It doesn't work in the case of indirect buffers and kmalloc failure, but that's rare (we could drop the packet in that case, but other drivers return TX_BUSY for similar reasons). For the record, I think this patch reflects poorly on the linux network API. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dinesh Subhraveti <dineshs@us.ibm.com>
| * virtio_net: formalize skb_vnet_hdrRusty Russell2009-09-23
| | | | | | | | | | | | | | | | | | We put the virtio_net_hdr into the skb's cb region; turn this into a union to clean up the code slightly and allow future expansion. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Dinesh Subhraveti <dineshs@us.ibm.com>
| * virtio_net: don't free buffers in xmit ringRusty Russell2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The virtio_net driver is complicated by the two methods of freeing old xmit buffers (in addition to freeing old ones at the start of the xmit path). The original code used a 1/10 second timer attached to xmit_free(), reset on every xmit. Before we orphaned skbs on xmit, the transmitting userspace could block with a full socket until the timer fired, the skb destructor was called, and they were re-woken. So we added the VIRTIO_F_NOTIFY_ON_EMPTY feature: supporting devices send an interrupt (even if normally suppressed) on an empty xmit ring which makes us schedule xmit_tasklet(). This was a benchmark win. Unfortunately, VIRTIO_F_NOTIFY_ON_EMPTY makes quite a lot of work: a host which is faster than the guest will fire the interrupt every xmit packet (slowing the guest down further). Attempting mitigation in the host adds overhead of userspace timers (possibly with the additional pain of signals), and risks increasing latency anyway if you get it wrong. In practice, this effect was masked by benchmarks which take advantage of GSO (with its inherent transmit batching), but it's still there. Now we orphan xmitted skbs, the pressure is off: remove both paths and no longer request VIRTIO_F_NOTIFY_ON_EMPTY. Note that the current QEMU will notify us even if we don't negotiate this feature (legal, but suboptimal); a patch is outstanding to improve that. Move the skb_orphan/nf_reset to after we've done the send and notified the other end, for a slight optimization. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Mark McLoughlin <markmc@redhat.com>
| * virtio_net: return NETDEV_TX_BUSY instead of queueing an extra skb.Rusty Russell2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This effectively reverts 99ffc696d10b28580fe93441d627cf290ac4484c "virtio: wean net driver off NETDEV_TX_BUSY". The complexity of queuing an skb (setting a tasklet to re-xmit) is questionable, especially once we get rid of the other reason for the tasklet in the next patch. If the skb won't fit in the tx queue, just return NETDEV_TX_BUSY. This is frowned upon, so a followup patch uses a more complex solution. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Herbert Xu <herbert@gondor.apana.org.au>
| * virtio_net: skb_orphan() and nf_reset() in xmit path.Rusty Russell2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | The complex transmit free logic was introduced to avoid hangs on removing the ip_conntrack module and also because drivers aren't generally supposed to keep stale skbs for unbounded times. After some debate, it was decided that while doing skb_orphan() generally is a rat's nest, we can do it in this driver. Following patches take advantage of this. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | 3c59x: Get rid of "Trying to free already-free IRQ"Anton Vorontsov2009-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following trace pops up if we try to suspend with 3c59x ethernet NIC brought down: root@b1:~# ifconfig eth16 down root@b1:~# echo mem > /sys/power/state ... 3c59x 0000:00:10.0: suspend 3c59x 0000:00:10.0: PME# disabled Trying to free already-free IRQ 48 ------------[ cut here ]------------ Badness at c00554e4 [verbose debug info unavailable] NIP: c00554e4 LR: c00554e4 CTR: c019a098 REGS: c7975c60 TRAP: 0700 Not tainted (2.6.31-rc4) MSR: 00021032 <ME,CE,IR,DR> CR: 28242422 XER: 20000000 TASK = c79cb0c0[1746] 'bash' THREAD: c7974000 ... NIP [c00554e4] __free_irq+0x108/0x1b0 LR [c00554e4] __free_irq+0x108/0x1b0 Call Trace: [c7975d10] [c00554e4] __free_irq+0x108/0x1b0 (unreliable) [c7975d30] [c005559c] free_irq+0x10/0x24 [c7975d40] [c01e21ec] vortex_suspend+0x70/0xc4 [c7975d60] [c017e584] pci_legacy_suspend+0x58/0x100 This is because the driver manages interrupts without checking for netif_running(). Though, there are few other issues with suspend/resume in this driver. The intention of calling free_irq() in suspend() was to avoid any possible spurious interrupts (see commit 5b039e681b8c5f30aac9cc04385 "3c59x PM fixes"). But, - On resume, the driver was requesting IRQ just after pci_set_master(), but before vortex_up() (which actually resets 3c59x chips). - Issuing free_irq() on a shared IRQ doesn't guarantee that a buggy HW won't trigger spurious interrupts in another driver that requested the same interrupt. So, if we want to protect from unexpected interrupts, then on suspend we should issue disable_irq(), not free_irq(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2Sebastian Haas2009-09-24
| | | | | | | | | | | | | | | | | | | | | | The driver mapped only 128 bytes of the CAN controller address space when a CPC-PCI v2 was detected (incl. CPC-104P). This patch will fix it by always mapping the whole address space (4096 bytes on all boards) of the corresponding PCI BAR. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-09-24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
| * | sysctl: remove "struct file *" argument of ->proc_handlerAlexey Dobriyan2009-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | cpumask: use zalloc_cpumask_var() where possibleLi Zefan2009-09-23
| |/ | | | | | | | | | | | | Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2009-09-23
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits) USB: Fix sysfs paths in documentation USB: skeleton: fix coding style issues. USB: O_NONBLOCK in read path of skeleton USB: make usb-skeleton honor O_NONBLOCK in write path USB: skel_read really sucks royally USB: Add hub descriptor update hook for xHCI USB: xhci: Support USB hubs. USB: xhci: Set multi-TT field for LS/FS devices under hubs. USB: xhci: Set route string for all devices. USB: xhci: Fix command wait list handling. USB: xhci: Change how xHCI commands are handled. USB: xhci: Refactor input device context setup. USB: xhci: Endpoint representation refactoring. USB: gadget: ether needs to select CRC32 USB: fix USBTMC get_capabilities success handling USB: fix missing error check in probing USB: usbfs: add USBDEVFS_URB_BULK_CONTINUATION flag USB: support for autosuspend in sierra while online USB: ehci-dbgp,ehci: Allow dbpg to work with suspend/resume USB: ehci-dbgp,documentation: Documentation updates for ehci-dbgp ...
| | * USB: Fix CDC EEM host driver 'sentinel' CRC validationBrian Niebuhr2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an alternate solution to the EEM 'sentinel' CRC valiation issue. CDC EEM allows using a 'sentinel' ethernet frame CRC of 0xdeadbeef in place of a real CRC. The 'sentinel' value is transmitted in big-endian order whereas the normal CRC is little-endian. This patch handles both cases appropriately. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2009-09-23
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: don't force VIRTIO_F_NOTIFY_ON_EMPTY lguest: cleanup for map_switcher() lguest: use PGDIR_SHIFT for PAE code to allow different PAGE_OFFSET lguest: use set_pte/set_pmd uniformly for real page table entries lguest: move panic notifier registration to its expected place. virtio_blk: add support for cache flush virtio: add virtio IDs file virtio: get rid of redundant VIRTIO_ID_9P definition virtio: make add_buf return capacity remaining virtio_pci: minor MSI-X cleanups
| | * | virtio: add virtio IDs fileFernando Luis Vazquez Cao2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Virtio IDs are spread all over the tree which makes assigning new IDs bothersome. Putting them together should make the process less error-prone. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| | * | virtio: make add_buf return capacity remainingRusty Russell2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This API change means that virtio_net can tell how much capacity remains for buffers. It's necessarily fuzzy, since VIRTIO_RING_F_INDIRECT_DESC means we can fit any number of descriptors in one, *if* we can kmalloc. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dinesh Subhraveti <dineshs@us.ibm.com>
| * | | spi: prefix modalias with "spi:"Anton Vorontsov2009-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-08 23:46:32 -0500