aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* net/fec: enable flow control and length check on enet-macUwe Kleine-König2011-02-15
| | | | | | Also optimize not to reread the value written to FEC_R_CNTRL. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: postpone unsetting driver data until the hardware is stoppedUwe Kleine-König2011-02-15
| | | | | Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: provide device for dma functions and matching sizes for map and unmapUwe Kleine-König2011-02-15
| | | | | | | | | | | | | | | This fixes warnings when CONFIG_DMA_API_DEBUG=y: NULL NULL: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000004781a020] [size=64 bytes] net eth0: DMA-API: device driver frees DMA memory with different size [device address=0x000000004781a020] [map size=2048 bytes] [unmap size=64 bytes] Moreover pass the platform device to dma_{,un}map_single which makes more sense because the logical network device doesn't know anything about dma. Passing the platform device was a suggestion by Lothar Waßmann. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: reorder functions a bit allows removing forward declarationsUwe Kleine-König2011-02-15
| | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: some whitespace cleanupUwe Kleine-König2011-02-15
| | | | | | A few of these were found and reported by Lothar Waßmann. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: consistenly name struct net_device pointers "ndev"Uwe Kleine-König2011-02-15
| | | | | | | A variable named "dev" usually (usually subjective) points to a struct device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: add phy_stop to fec_enet_closeUwe Kleine-König2011-02-15
| | | | | | | This undoes the effects of phy_start in fec_enet_open. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: consolidate all i.MX options to CONFIG_ARMUwe Kleine-König2011-02-15
| | | | | | | | | | Moreover stop listing all i.MX platforms featuring a FEC, and use the platform's config symbol that selects registration of a fec device instead. This might make it easier to add new platforms. Set default = y for ARMs having a fec to reduce defconfig sizes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: put the ioremap cookie immediately into a void __iomem pointerUwe Kleine-König2011-02-15
| | | | | | | | Saving it first into struct net_device->base_addr (which is an unsigned long) is pointless and only needs to use more casts than necessary. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: no need to memzero private dataUwe Kleine-König2011-02-15
| | | | | | | | alloc_etherdev internally uses kzalloc, so the private data is already zerod out. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: no need to check for validity of ndev in suspend and resumeUwe Kleine-König2011-02-15
| | | | | | | | dev_set_drvdata is called unconditionally in the probe function and so it cannot be NULL. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: don't free an irq that failed to be requestedUwe Kleine-König2011-02-15
| | | | | Reported-by: Lothar Waßmann <LW@KARO-elektronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: release mem_region requested in probe in error path and removeUwe Kleine-König2011-02-15
| | | | | Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* net/fec: no need to cast arguments for memcpyUwe Kleine-König2011-02-15
| | | | | | | memcpy takes a const void * as 2nd argument. So the argument is converted automatically to void * anyhow. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* pch_can: fix module reload issue with MSITomoya2011-02-08
| | | | | | | | | | | Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* pch_can: fix rmmod issueTomoya2011-02-08
| | | | | | | | | Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* pch_can: fix 800k comms issueTomoya2011-02-08
| | | | | | | | | Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* USB CDC NCM errata updates for cdc_ncm host driverAlexey Orishko2011-02-08
| | | | | | | | | | | | | | | | | | | | | Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2011-02-08
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
| * ixgbe: update version stringDon Skidmore2011-02-08
| | | | | | | | | | | | | | | | This will synchronize the version string with that of the latest source forge driver which shares its functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: cleanup variable initializationDon Skidmore2011-02-08
| | | | | | | | | | | | | | | | | | The ixgbe_fcoe_ddp_get function wasn't initializing one of its variables and this was producing compiler warnings. This patch cleans that up. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: limit VF access to network trafficAlexander Duyck2011-02-08
| | | | | | | | | | | | | | | | | | This change fixes VM pool allocation issues based on MAC address filtering, as well as limits the scope of VF access to promiscuous mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: fix for 82599 erratum on Header SplittingDon Skidmore2011-02-08
| | | | | | | | | | | | | | | | | | | | | | | | | | We have found a hardware erratum on 82599 hardware that can lead to unpredictable behavior when Header Splitting mode is enabled. So we are no longer enabling this feature on affected hardware. Please see the 82599 Specification Update for more information. CC: stable@kernel.org Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: fix variable set but not used warnings by gcc 4.6Emil Tantilov2011-02-08
| | | | | | | | | | | | | | | | | | | | | | | | Caught with gcc 4.6 -Wunused-but-set-variable Remove unused napi_vectors variable. Fix the use of reset_bit in ixgbe_reset_hw_X540() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * e1000: add support for Marvell Alaska M88E1118R PHYFlorian Fainelli2011-02-08
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for Marvell Alask M88E188R PHY chips. Support for other M88* PHYs is already there, so there is nothing more to add than its PHY id. CC: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * e1000e: tx_timeout should not increment for non-hang eventsJesse Brandeburg2011-02-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver increments the tx_timeout counter (an error counter) when simply resetting the part with outstanding transmit work pending. This is an unnecessary count of an error, when all we should be doing is just resetting the part and discarding the transmits. With this change the only increment of tx_timeout is when the stack calls the watchdog reset function due to a true Tx timeout. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | Merge branch 'master' of ↵David S. Miller2011-02-08
|\ \ | |/ |/| | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * iwlagn: Re-enable RF_KILL interrupt when downDon Fry2011-02-07
| | | | | | | | | | | | | | | | | | | | | | | | With commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 only one RF_KILL interrupt will be seen by the driver when the interface is down. Re-enable the interrupt when it occurs to see all transitions. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix possible double free of PAPRD skb'sMohammed Shafi Shajakhan2011-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [<c05c6468>] ? printk+0x2d/0x35 [ 194.193732] [<c05c63c3>] panic+0x5a/0xd2 [ 194.193741] [<c05ca3ed>] oops_end+0xcd/0xd0 [ 194.193750] [<c0105f74>] die+0x54/0x80 [ 194.193758] [<c05c9a16>] do_trap+0x96/0xc0 [ 194.193837] [<c0103fb0>] ? do_invalid_op+0x0/0xa0 [ 194.193846] [<c010403b>] do_invalid_op+0x8b/0xa0 [ 194.193856] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193866] [<c012ce18>] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [<c01de47a>] ? free_one_page+0x12a/0x2d0 [ 194.193888] [<c01e04dc>] ? __free_pages+0x1c/0x40 [ 194.193897] [<c05c97a7>] error_code+0x73/0x78 [ 194.193906] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193915] [<c04ecdd0>] ? skb_release_data+0x70/0xa0 [ 194.193924] [<c04ecdd0>] skb_release_data+0x70/0xa0 [ 194.193933] [<c04ec997>] __kfree_skb+0x17/0x90 [ 194.193941] [<c04eca31>] consume_skb+0x21/0x40 [ 194.193964] [<f85e0b70>] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [<f85caddf>] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [<c04ec40e>] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [<f85cc803>] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [<c0108a28>] ? sched_clock+0x8/0x10 [ 194.194030] [<c016bf14>] ? sched_clock_local+0xa4/0x180 [ 194.194040] [<c0139f57>] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [<c013a194>] ? enqueue_entity+0x174/0x200 [ 194.194064] [<f85ce83d>] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [<f85c7b9f>] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [<c01505d7>] tasklet_action+0xa7/0xb0 [ 194.194107] [<c015127c>] __do_softirq+0x9c/0x1b0 [ 194.194117] [<c01a7f64>] ? irq_to_desc+0x14/0x20 [ 194.194126] [<c0124fc4>] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [<c01513d5>] do_softirq+0x45/0x50 [ 194.194145] [<c0151545>] irq_exit+0x65/0x70 [ 194.194153] [<c05cf665>] do_IRQ+0x55/0xc0 [ 194.194162] [<c016a6c7>] ? hrtimer_start+0x27/0x30 [ 194.194171] [<c0103630>] common_interrupt+0x30/0x38 [ 194.194181] [<c012c21a>] ? native_safe_halt+0xa/0x10 [ 194.194268] [<c010a2f9>] default_idle+0x49/0xb0 [ 194.194277] [<c0101fcc>] cpu_idle+0x8c/0xd0 [ 194.194286] [<c05b2431>] rest_init+0x71/0x80 [ 194.194295] [<c081981a>] start_kernel+0x36e/0x374 [ 194.194305] [<c08199dd>] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [<c08190d7>] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * carl9170: fix typo in PS codeChristian Lamparter2011-02-04
| | | | | | | | | | | | | | | | | | This patch fixes a off-by-one bug which bugged the driver's PS-POLL capability. Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wireless, wl1251: Fix potential NULL pointer dereference in ↵Jesper Juhl2011-02-03
| | | | | | | | | | | | | | | | | | | | | | wl1251_op_bss_info_changed() In drivers/net/wireless/wl1251/main.c:wl1251_op_bss_info_changed() we make a call to ieee80211_beacon_get() which may return NULL, but we do not check the return value before dereferencing the pointer. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlagn: overwrite EEPROM chain setting for 6250 devicesWey-Yi Guy2011-02-02
| | | | | | | | | | | | | | | | | | | | 6250 2x2 devices have 2 tx chain and 2 rx chain. For some reason, the EEPROM contain incorrect information and indicate it only has single tx chain. overwrite it with .cfg parameter to make sure both chain 'A' and chain 'B' can be used for transmit and receive Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | bnx2x: Duplication in promisc modeVladislav Zolotarov2011-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent packets duplication for frames targeting FCoE L2 ring: packets were arriving to stack from both L2 RSS and from FCoE L2 in a promiscuous mode. Configure FCoE L2 ring to DROP_ALL rx mode, when interface is configured to PROMISC, and to accept only unicast frames, when interface is configured to ALL_MULTI. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sis900: Fix mem leak in sis900_rx error pathJesper Juhl2011-02-05
| | | | | | | | | | | | | | | | | | Fix memory leak in error path of sis900_rx(). If we don't do this we'll leak the skb we dev_alloc_skb()'ed just a few lines above when the variable goes out of scope. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | benet: Avoid potential null deref in be_cmd_get_seeprom_data()Ajit Khaparde2011-02-05
| | | | | | | | | | | | | | Found by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: can: janz-ican3: world-writable sysfs termination fileVasiliy Kulikov2011-02-04
| | | | | | | | | | | | | | Don't allow everybody to set terminator via sysfs. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: can: at91_can: world-writable sysfs filesVasiliy Kulikov2011-02-04
| | | | | | | | | | | | | | | | Don't allow everybody to write to mb0_id file. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: prevent RxFIFO induced loops in the irq handler.Francois Romieu2011-02-04
| | | | | | | | | | | | | | | | | | While the RxFIFO interruption is masked for most 8168, nothing prevents it to appear in the irq status word. This is no excuse to crash. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
* | r8169: RxFIFO overflow oddities with 8168 chipsets.Francois Romieu2011-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some experiment-based action to prevent my 8168 chipsets locking-up hard in the irq handler under load (pktgen ~1Mpps). Apparently a reset is not always mandatory (is it at all ?). - RTL_GIGA_MAC_VER_12 - RTL_GIGA_MAC_VER_25 Missed ~55% packets. Note: - this is an old SiS 965L motherboard - the 8168 chipset emits (lots of) control frames towards the sender - RTL_GIGA_MAC_VER_26 The chipset does not go into a frenzy of mac control pause when it crashes yet but it can still be crashed. It needs more work. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
* | r8169: use RxFIFO overflow workaround for 8168c chipset.Ivan Vecera2011-02-04
| | | | | | | | | | | | | | | | | | | | | | I found that one of the 8168c chipsets (concretely XID 1c4000c0) starts generating RxFIFO overflow errors. The result is an infinite loop in interrupt handler as the RxFIFOOver is handled only for ...MAC_VER_11. With the workaround everything goes fine. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com>
* | niu: Fix races between up/down and get_stats.David S. Miller2011-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Flavio Leitner, there is no synchronization to protect NIU's get_stats method from seeing a NULL pointer in either np->rx_rings or np->tx_rings. In fact, as far as ->ndo_get_stats is concerned, these values are set completely asynchronously. Flavio attempted to fix this using a RW semaphore, which in fact works most of the time. However, dev_get_stats() can be invoked from non-sleepable contexts in some cases, so this fix doesn't work in all cases. So instead, control the visibility of the np->{rx,tx}_ring pointers when the device is being brough up, and use properties of the device down sequence to our advantage. In niu_get_stats(), return immediately if netif_running() is false. The device shutdown sequence first marks the device as not running (by clearing the __LINK_STATE_START bit), then it performans a synchronize_rcu() (in dev_deactive_many()), and then finally it invokes the driver ->ndo_stop() method. This guarentees that all invocations of niu_get_stats() either see netif_running() as false, or they see the channel pointers before ->ndo_stop() clears them out. If netif_running() is true, protect against startup races by loading the np->{rx,tx}_rings pointer into a local variable, and punting if it is NULL. Use ACCESS_ONCE to prevent the compiler from reloading the pointer on us. Also, during open, control the order in which the pointers and the ring counts become visible globally using SMP write memory barriers. We make sure the np->num_{rx,tx}_rings value is stable and visible before np->{rx,tx}_rings is. Such visibility control is not necessary on the niu_free_channels() side because of the RCU sequencing that happens during device down as described above. We are always guarenteed that all niu_get_stats calls are finished, or will see netif_running() false, by the time ->ndo_stop is invoked. Reported-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | atl1c: Add missing PCI device IDChuck Ebbert2011-02-02
| | | | | | | | | | | | | | | | | | Commit 8f574b35f22fbb9b5e5f1d11ad6b55b6f35f4533 ("atl1c: Add AR8151 v2 support and change L0s/L1 routine") added support for a new adapter but failed to add it to the PCI device table. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: remove netif_stop_queue being called before register_netdev.Ajit Khaparde2011-02-01
| | | | | | | | | | | | | | It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: fix a crash seen during insmod/rmmod testAjit Khaparde2011-02-01
| | | | | | | | | | | | | | | | | | While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: multicasts in NPAR modeVladislav Zolotarov2011-02-01
| | | | | | | | | | | | | | | | | | | | | | The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | depca: Fix warningsAlan Cox2011-02-01
| | | | | | | | | | | | Replace the rather weird use of ++ with + 1 as the value is being assigned Signed-off-by: Alan Cox <alan@linux.intel.com>
* | Merge branch 'master' of ↵David S. Miller2011-02-01
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * ath9k: Fix memory leak due to failed PAPRD framesMohammed Shafi Shajakhan2011-02-01
| | | | | | | | | | | | | | | | free the skb's when the Tx of PAPRD frames fails and also add a debug message indicating that. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl12xx: fix use after freeMathias Krause2011-01-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When DEBUG_SPI is included in the debug log level wl1271_spi_reset() will dump the already freed memory instead of the SPI buffer. This bug was spotted by the semantic patch tool coccinelle using the script found at scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix power save usage count imbalance on deinitRajkumar Manoharan2011-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While unloading the driver, the ps_usecount is incremented before configuring gpio registers in deinit_device. But it is failed to restore the ps_usecount after that. The problem is that the chip is forcibly moved to FULL SLEEP by radio_disable when mac80211 is reporting as idle though ps_usecount is not zero. This patch retores ps_usecount properly and ensures that the chip is always moved to full sleep only if ps usage count is zero which also helps in debugging deadbeef on multivif case. And also fixes the following warning. ath: DMA failed to stop in 10 ms AR_CR=0xdeadbeef AR_DIAG_SW=0xdeadbeef ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:536 ath_stoprecv+0xf4/0x100 [ath9k]() Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-08 11:14:36 -0500