aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-04-14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) [BRIDGE]: Fix crash in __ip_route_output_key with bridge netfilter [NETFILTER]: ipt_CLUSTERIP: fix race between clusterip_config_find_get and _entry_put [IPV6] ADDRCONF: Don't generate temporary address for ip6-ip6 interface. [IPV6] ADDRCONF: Ensure disabling multicast RS even if privacy extensions are disabled. [IPV6]: Use appropriate sock tclass setting for routing lookup. [IPV6]: IPv6 extension header structures need to be packed. [IPV6]: Fix ipv6 address fetching in raw6_icmp_error(). [NET]: Return more appropriate error from eth_validate_addr(). [ISDN]: Do not validate ISDN net device address prior to interface-up [NET]: Fix kernel-doc for skb_segment [SOCK] sk_stamp: should be initialized to ktime_set(-1L, 0) net: check for underlength tap writes net: make struct tun_struct private to tun.c [SCTP]: IPv4 vs IPv6 addresses mess in sctp_inet[6]addr_event. [SCTP]: Fix compiler warning about const qualifiers [SCTP]: Fix protocol violation when receiving an error lenght INIT-ACK [SCTP]: Add check for hmac_algo parameter in sctp_verify_param() [NET_SCHED] cls_u32: refcounting fix for u32_delete() [DCCP]: Fix skb->cb conflicts with IP [AX25]: Potential ax25_uid_assoc-s leaks on module unload. ...
| * net: check for underlength tap writesRusty Russell2008-04-12
| | | | | | | | | | | | | | | | | | If the user gives a packet under 14 bytes, we'll end up reading off the end of the skb (not oopsing, just reading off the end). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: make struct tun_struct private to tun.cRusty Russell2008-04-12
| | | | | | | | | | | | | | | | | | There's no reason for this to be in the header, and it just hurts recompile time. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyanskiy <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tg3: fix MMIO for PPC 44x platformsSergei Shtylyov2008-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver stores the PCI resource addresses into 'unsigned long' variable before calling ioremap_nocache() on them. This warrants kernel oops when the registers are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space mapped beyond 4 GB. The arch/ppc/ kernel has a fixup in ioremap() that creates an illusion that the PCI memory resource is mapped below 4 GB, but arch/powerpc/ code got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled. [ Bump driver version and release date -DaveM ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Mark generic HDLC + PPP as broken.Krzysztof Halasa2008-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PPP support in generic HDLC in Linux 2.6.25 is broken and will cause a kernel panic when a device configured in PPP mode is activated. It will be replaced by new PPP implementation after Linux 2.6.25 is released. This affects only PPP support in generic HDLC (mostly Hitachi SCA and SCA-II based drivers, wanxl, and few others). Standalone syncppp and async PPP support are not affected. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * ehea: Fix DLPAR memory add supportThomas Klein2008-04-12
| | | | | | | | | | | | | | | | This patch fixes two weaknesses in send/receive packet handling which may lead to kernel panics during DLPAR memory add operations. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * sc92031: sysfs link missingStephen Hemminger2008-04-12
| | | | | | | | | | | | | | | | | | | | | | | | Add missing sysfs device association. Compile tested only -ENOHW. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10380 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: <tom@sharkbay.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * smc91x driver: fix bug: print warning only in interrupt modeSonic Zhang2008-04-12
| | | | | | | | | | | | | | | | | | http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3956 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * forcedeth: mac address fixAyaz Abdulla2008-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This critical patch fixes a mac address issue recently introduced. If the device's mac address was in correct order and the flag NVREG_TRANSMITPOLL_MAC_ADDR_REV was set, during nv_remove the flag would get cleared. During next load, the mac address would get reversed because the flag is missing. As it has been indicated previously, the flag is cleared across a low power transition. Therefore, the driver should set the mac address back into the reversed order when clearing the flag. Also, the driver should set back the flag after a low power transition to protect against kexec command calling nv_probe a second time. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * macb: Use semicolon instead of comma for statementAtsushi Nemoto2008-04-12
| | | | | | | | | | | | | | It seems no good reason to use comma here. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * macb: Call phy_disconnect on removingAtsushi Nemoto2008-04-12
| | | | | | | | | | | | | | | | Call phy_disconnect() on remove routine. Otherwise the phy timer causes a kernel crash when unloading. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * ucc_geth: fix non-functional fixed phy supportJoakim Tjernlund2008-04-12
| | | | | | | | | | | | | | | | | | | | | | The new Fixed PHY method, fixed-link property, isn't impl. for ucc_geth which makes fixed PHYs non functional. Add support for the new method to restore the Fixed PHY functionality. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * fs_enet: Don't call NAPI functions when NAPI is not used.Laurent Pinchart2008-04-12
| | | | | | | | | | | | | | | | fs_enet_close() calls napi_disable() unconditionally. This patch skips the call when use_napi isn't set. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * sky2: missing chip name for Yukon SupremeStephen Hemminger2008-04-12
| | | | | | | | | | | | | | | | | | Any usage of sky2 on new Yukon Supreme would cause a NULL dereference. The chip is very new, so the support is still untested; vendor has not sent any eval hardware. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-04-11
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [NETNS][IPV6] tcp - assign the netns for timewait sockets [IPV4]: Fix byte value boundary check in do_ip_getsockopt(). BNX2X: Correct bringing chip out of reset [NETFILTER]: nf_nat: autoload IPv4 connection tracking [NETFILTER]: xt_hashlimit: fix mask calculation [XFRM]: xfrm_user: fix selector family initialization rt61pci: rt61pci_beacon_update do not free skb twice ssb-mipscore: Fix interrupt vectors ssb-pcicore: Fix IRQ TPS flag handling mac80211: use short_preamble mode from capability if ERP IE not present [NET]: Undo code bloat in hot paths due to print_mac(). [TCP]: Don't allow FRTO to take place while MTU is being probed [TCP]: tcp_simple_retransmit can cause S+L [TCP]: Fix NewReno's fast rexmit/recovery problems with GSOed skb [TCP]: Restore 2.6.24 mark_head_lost behavior for newreno/fack nl80211: fix STA AID bug b43legacy: fix bcm4303 crash iwlwifi: fix n-band association problem ipw2200: set MAC address on radiotap interface libertas: fix mode initialization problem
| * BNX2X: Correct bringing chip out of resetEliezer Tamir2008-04-09
| | | | | | | | | | | | | | | | | | | | Fixed bug: Wrong register was written to when bringing the chip out of reset. [ Bump driver version and release date -DaveM ] Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵David S. Miller2008-04-09
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * rt61pci: rt61pci_beacon_update do not free skb twiceDaniel Wagner2008-04-09
| | | | | | | | | | | | | | | | | | | | | | | | The layer above will free the skb in an error case. Signed-off-by: Daniel Wagner <wagi@monom.org> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwlwifi: fix n-band association problemAbhijeet Kolekar2008-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the IWL4965_HT flag (n-band) in Kconfig. Removed the "depends on n" from Kconfig for config IWL4965_HT Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ipw2200: set MAC address on radiotap interfaceDaniel Drake2008-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bada339ba24dee9e143bfb42e1dc61f146619846 enforces that all interfaces have a valid MAC address before they are brought up. ipw2200 does not assign a MAC address to it's radiotap interface, meaning that the radiotap interface cannot be brought up in 2.6.24. https://bugs.gentoo.org/show_bug.cgi?id=215714 Fix this by copying the MAC address from the real interface. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * libertas: fix mode initialization problemHolger Schurig2008-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | After moving lbs_find_best_network_ssid() from scan.c to assoc.c gcc was able to deduce that new_mode might stay uninitialized. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | [NET]: Undo code bloat in hot paths due to print_mac().David S. Miller2008-04-08
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If print_mac() is used inside of a pr_debug() the compiler can't see that the call is redundant so still performs it even of pr_debug() ends up being a nop. So don't use print_mac() in such cases in hot code paths, use MAC_FMT et al. instead. As noted by Joe Perches, pr_debug() could be modified to handle this better, but that is a change to an interface used by the entire kernel and thus needs to be validated carefully. This here is thus the less risky fix for 2.6.25 Signed-off-by: David S. Miller <davem@davemloft.net>
* | virtio_net: remove overzealous printkAnthony Liguori2008-04-07
| | | | | | | | | | | | | | | | | | | | | | The 'disable_cb' is really just a hint and as such, it's possible for more work to get queued up while callbacks are disabled. Under stress with an SMP guest, this printk triggers very frequently. There is no race here, this is how things are designed to work so let's just remove the printk. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Revert "smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgrade"Linus Torvalds2008-04-07
| | | | | | | | | | | | | | | | | | This reverts commit 9e6db60825ef7e7999abc610ce256ba768e58162, which was merged without the API it needed, causing build breakage. Reported-by: Bryan Wu <cooloney@kernel.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-04-07
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: fix endian lossage in forcedeth net/tokenring/olympic.c section fixes net: marvell.c fix sparse shadowed variable warning [VLAN]: Fix egress priority mappings leak. [TG3]: Add PHY workaround for 5784 [NET]: srandom32 fixes for networking v2 [IPV6]: Fix refcounting for anycast dst entries. [IPV6]: inet6_dev on loopback should be kept until namespace stop. [IPV6]: Event type in addrconf_ifdown is mis-used. [ICMP]: Ensure that ICMP relookup maintains status quo
| * fix endian lossage in forcedethAl Viro2008-04-04
| | | | | | | | | | | | | | | | | | | | | | a) if you initialize something with le32_to_cpu(...), then |= it with host-endian and feed to cpu_to_le32(), it's most definitely *not* __le32. As sparse would've told you... b) the whole sequence is |= cpu_to_le32(host-endian constant) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * net/tokenring/olympic.c section fixesAdrian Bunk2008-04-04
| | | | | | | | | | | | | | | | | | | | My previous section fix only turned one section problem into another section problem. This patch fixes it for real. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * net: marvell.c fix sparse shadowed variable warningHarvey Harrison2008-04-04
| | | | | | | | | | | | | | | | | | | | | | The other if blocks don't redeclare temp, remove the redeclaration in the final if() block. drivers/net/phy/marvell.c:214:7: warning: symbol 'temp' shadows an earlier one drivers/net/phy/marvell.c:160:6: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [TG3]: Add PHY workaround for 5784Matt Carlson2008-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The 5784 B step and newer chips require the PHY DSPs to be fine-tuned based on one-time programmable values stored in the chip. This is essential to achieve optimal PHY operations especially when using long cables. We also need to properly handle the 10Mbit RX bit in the CPMU_CTRL register during PHY reset. Update version to 3.89. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'merge' of ↵Linus Torvalds2008-04-03
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet works [POWERPC] mpc5200: Amalgamated DTS fixes and updates [POWERPC] Fix rtas_flash procfs interface [POWERPC] Fix deadlock with mmu_hash_lock in hash_page_sync [POWERPC] Fix iSeries hard irq enabling regression [POWERPC] Fix CPM2 SCC1 clock initialization. [POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIB [POWERPC] fsldma: Use compatiable binding as spec [POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata [POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigs [POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts
| * [POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet worksRené Bürgel2008-04-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | sky2: fix suspend/resume racesStephen Hemminger2008-04-02
| | | | | | | | | | | | | | | | | | | | There are a couple of possible races on suspend/resume. First the driver needs to block new packets from being queued for Tx. The other less likely problem is the watchdog timer going off during resume. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-04-02
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits) [VLAN]: Proc entry is not renamed when vlan device name changes. [IPV6]: Fix ICMP relookup error path dst leak [ATM] drivers/atm/iphase.c: compilation warning fix IPv6: do not create temporary adresses with too short preferred lifetime IPv6: only update the lifetime of the relevant temporary address bluetooth : __rfcomm_dlc_close lock fix bluetooth : use lockdep sub-classes for diffrent bluetooth protocol [ROSE/AX25] af_rose: rose_release() fix mac80211: correct use_short_preamble handling b43: Fix PCMCIA IRQ routing b43: Add DMA mapping failure messages mac80211: trigger ieee80211_sta_work after opening interface [LLC]: skb allocation size for responses [IP] UDP: Use SEQ_START_TOKEN. [NET]: Remove Documentation/networking/sk98lin.txt [ATM] atm/idt77252.c: Make 2 functions static [ATM]: Make atm/he.c:read_prom_byte() static [IPV6] MCAST: Ensure to check multicast listener(s). [LLC]: Kill llc_station_mac_sa symbol export. forcedeth: fix locking bug with netconsole ...
| * | b43: Fix PCMCIA IRQ routingMichael Buesch2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | This fixes the IRQ routing on PCMCIA devices. With this patch the card will finally be able to receive IRQs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | b43: Add DMA mapping failure messagesMichael Buesch2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds messages for some DMA mapping failures. These are useful for debugging DMA address problems, as they appear on x86_64 machines with IOMMU enabled. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | Merge branch 'upstream-davem' of ↵David S. Miller2008-03-28
| |\ \ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| | * | forcedeth: fix locking bug with netconsoleIngo Molnar2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While using netconsole on forcedeth, lockdep noticed the following locking bug: ================================= [ INFO: inconsistent lock state ] 2.6.24-rc6 #6 Signed-off-by: Ingo Molnar <mingo@elte.hu> --------------------------------- inconsistent {softirq-on-W} -> {in-softirq-W} usage. udevd/719 [HC0[0]:SC1[1]:HE1:SE0] takes: (_xmit_ETHER){-+..}, at: [<c043062e>] dev_watchdog+0x1c/0xb9 {softirq-on-W} state was registered at: [<c0147f67>] mark_held_locks+0x4e/0x66 [<c014810e>] trace_hardirqs_on+0xfe/0x136 [<c048ae63>] _spin_unlock_irq+0x22/0x42 [<c02ec617>] nv_start_xmit_optimized+0x347/0x37a [<c042c80d>] netpoll_send_skb+0xa4/0x147 [<c042d4a6>] netpoll_send_udp+0x238/0x242 [<c02f44f6>] write_msg+0x6d/0x9b [<c012c129>] __call_console_drivers+0x4e/0x5a [<c012c18c>] _call_console_drivers+0x57/0x5b [<c012c2dd>] release_console_sem+0x11c/0x1b9 [<c012caeb>] register_console+0x1eb/0x1f3 [<c06ae673>] init_netconsole+0x119/0x15f [<c069149b>] kernel_init+0x147/0x294 [<c01058cb>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff irq event stamp: 950 hardirqs last enabled at (950): [<c048ae63>] _spin_unlock_irq+0x22/0x42 hardirqs last disabled at (949): [<c048aaf7>] _spin_lock_irq+0xc/0x38 softirqs last enabled at (0): [<c012a29c>] copy_process+0x375/0x126d softirqs last disabled at (947): [<c0106d43>] do_softirq+0x61/0xc6 other info that might help us debug this: no locks held by udevd/719. stack backtrace: Pid: 719, comm: udevd Not tainted 2.6.24-rc6 #6 [<c0105c46>] show_trace_log_lvl+0x12/0x25 [<c01063ec>] show_trace+0xd/0x10 [<c010670c>] dump_stack+0x57/0x5f [<c0147505>] print_usage_bug+0x10a/0x117 [<c0147c38>] mark_lock+0x121/0x402 [<c01488b6>] __lock_acquire+0x3d1/0xb64 [<c0149405>] lock_acquire+0x4e/0x6a [<c048a99b>] _spin_lock+0x23/0x32 [<c043062e>] dev_watchdog+0x1c/0xb9 [<c0133e4a>] run_timer_softirq+0x133/0x193 [<c0130907>] __do_softirq+0x78/0xed [<c0106d43>] do_softirq+0x61/0xc6 ======================= eth1: link down The fix is to disable/restore irqs instead of disable/enable. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | usb net: asix does not really need 10/100mbitMike Frysinger2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The asix usb driver currently depends on NET_ETHERNET which means you cannot enable this driver if you only have 1000mbit enabled in your kernel. Since there is no real dependency between the NET_ETHERNET portion and the asix driver, simply drop it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | Blackfin EMAC Driver: delete unused variables to fixup gcc warningsMike Frysinger2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | ibm_newemac: emac_tx_csum typo fixValentine Barshak2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the "&& skb->ip_summed == CHECKSUM_PARTIAL" part out of emac_has_feature parameters. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | Make pasemi_mac.c depend on PPC_PASEMI to prevent link errorsMichael Ellerman2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/pasemi_mac.c is enabled by CONFIG_PASEMI_MAC, which depends on PPC64 && PCI. However pasemi_mac.c uses several routines that are only built when PPC_PASEMI is selected. This can lead to an unbuildable config: ERROR: ".pasemi_dma_start_chan" [drivers/net/pasemi_mac.ko] undefined! So make CONFIG_PASEMI_MAC depend on PPC_PASEMI instead of PPC64. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | S2io: Version update for Tx completion patchSreenivasa Honnur2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Updated version number. - Resubmitting with correct version update. - this patch to be applied for upstream-davem branch Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | drivers/net/usb/pegasus.c: remove in_atomic() checkDavid Brownell2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove superfluous in-atomic() check; ethtool MII ops are called from task context. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | dm9601: Fix multicast hash table handlingPeter Korsgaard2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The loop forgot to walk the net->mc_list list, so only the first multicast address was programmed into the hash table. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | [netdrvr] tulip_read_eeprom fixes for BUG 4420Grant Grundler2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If "location" is > "addr_len" bits, the high bits of location would interfere with the READ_CMD sent to the eeprom controller. A patch was submitted to bug: http://bugzilla.kernel.org/show_bug.cgi?id=4420 which simply truncated the "location", read whatever was in "location modulo addr_len", and returned that value. That avoids confusing the eeprom but seems like the wrong solution to me. Correct would be to not read beyond "1 << addr_len" address of the eeprom. I am submitting two changes to implement this: 1) tulip_read_eeprom will return zero (since we can't return -EINVAL) if this is attempted (defensive programming). 2) In tulip_core.c, fix the tulip_read_eeprom caller so they don't iterate past addr_len bits and make sure the entire tp->eeprom[] array is cleared. I konw we don't strictly need both. I would prefer both in the tree since it documents the issue and provides a second "defense" from the bug from creeping back in. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | lapb: use the shorter LIST_HEAD form for brevityRobert P. J. Day2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [BOND]: Fix warning in bond_sysfs.cDavid S. Miller2008-03-28
| |/ / | | | | | | | | | | | | | | | | | | | | | original_mtu is only used if we end up with a non-NULL dev, and it is assigned in all such cases, but GCC can't see that. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | rt2x00: Ignore set_state(STATE_SLEEP) failureIvo van Doorn2008-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some hardware never seem to accept the "goto sleep" command, since the legacy drivers don't have suspend and resume handlers the entire code for it was basically a educated guess (based on the "enable radio" code). This patch will only print a warning when the "goto sleep" command fails, and just continues as usual. Perhaps that means the device will not reach a sleep state and consumes more power then it should, but it is equally possible it simply needs some seconds longer to sleep. Anyway, by making the command non-fatal it will not block the rest of the suspend procedure. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | drivers/net/wireless/iwlwifi/iwl-4965.c: correct use of ! and &Julia Lawall2008-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Guy Cohen <guy.cohen@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | libertas: fix spinlock recursion bugHolger Schurig2008-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug detected by CONFIG_DEBUG_SPINLOCK: if_cs_get_int_status() is only called from lbs_thread(), via priv->hw_get_int_status. However, lbs_thread() has already taken the priv->driver_lock. So it's a fault to take the same lock again here. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 17:53:42 -0500