aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* stmmac: split core and dma for the mac10/100Giuseppe CAVALLARO2010-04-14
| | | | | | | | | The patch splits core and dma parts for the mac10/100 device. This was already done for the GMAC device. It should make more flexible the driver to support other chips. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: clarify promiscuous cmd with a commentSathya Perla2010-04-13
| | | | | | | | | The promiscous cmd config code gives an impression that setting a port to promisc mode will unset the other port. This is not the case and is clarified with a comment. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: last_rx eliminationEric Dumazet2010-04-13
| | | | | | | | Network drivers do not have to update last_rx, unless they need it for their private use. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix some #includes in CAN drivers (rebased for net-next-2.6)Hans J. Koch2010-04-13
| | | | | | | | | | | | In the current implementation, CAN drivers need to #include <linux/can.h> _before_ they #include <linux/can/dev.h>, which is both ugly and unnecessary. Fix this by including <linux/can.h> in <linux/can/dev.h> and remove the #include <linux/can.h> lines from drivers. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* bcm63xx_enet: do not overwrite ENET_CTL_REG valueFlorian Fainelli2010-04-13
| | | | | | | | | | | | | | | | | bcm_enet_hw_preinit will correctly set values in ENET_CTL_REG for internal or external MII operations, however, bcm_enet_open will blindly overwrite the ENET_CTL_REG register value and thus we will loose any changes to it that were made in bcm_enet_hw_preinit, rendering external MII operations non-working. This would lead to the driver not being able to check for link availability on external PHY setups, and thus we would never get to sending packets because link was down from the driver side. This was completely un-noticed because all boards out there but BCM6338-based ones use internal phy on their enet0 interface. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* PHY: fix typo in bcm63xx PHY driver tableFlorian Fainelli2010-04-13
| | | | | Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* chelsio: Fix build warning.David S. Miller2010-04-13
| | | | | | | | | | | GCC warns that: drivers/net/chelsio/sge.c:463:11: warning: operation on 's->port' may be undefined Better to eliminate the side effects in the calculation and express what was intended here. Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: use static params to save stack spaceJesse Brandeburg2010-04-13
| | | | | | | | | | | | | | | used a modified checkstack to get the 56 number (normally checkstack wouldn't show this low a value) checkstack before: 0x0000012f e1000e_check_options [e1000e]: 272 after: 0x0000012f e1000e_check_options [e1000e]: 56 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: modify register test for i350 to reflect read only bits in RDLEN/TDLENAlexander Duyck2010-04-13
| | | | | | | | | | The registers for RDLEN/TDLEN on i350 have the first 7 bits as read only. This is a change from previous hardware in which it was only the first 4 bits that were read only. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* myri10ge: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* chelsio: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qla3xxx: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Update version to 3.110Matt Carlson2010-04-13
| | | | | | | | This patch updates the tg3 version to 3.110. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Remove function errors flagged by checkpatchMatt Carlson2010-04-13
| | | | | | | | | | | This patch removes the following checkpatch errors: * return is not a function, parentheses are not required * space prohibited between function name and open parenthesis '(' Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Unify max pkt size preprocessor constantsMatt Carlson2010-04-13
| | | | | | | | | | | The maximum packet size that gets programmed into the standard producer ring control block is directly related to the packet size used to allocate packet buffers. This patch removes the redundant preprocessor constant. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Re-inline VLAN tags when appropriateMatt Carlson2010-04-13
| | | | | | | | | | | | | | The tg3 driver is written so that VLAN tagged packets can be accepted, even if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. (Think raw interfaces.) If the device has ASF support enabled, the firmware requires the driver to enable VLAN tag stripping. If VLAN tagging is not explicitly supported by the kernel and ASF is enabled, the driver will have to reinject the VLAN tag back into the packet stream. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Optimize rx double copy testMatt Carlson2010-04-13
| | | | | | | | | | | | | | | | | On a PCIX bus, the 5701 has a bug which requires the driver to double copy all rx packets. The rx code uses the rx_offset device member as a flag to determine if this workaround should take effect. The following patch will modify the rx_offset member such that this test will become less clear. The patch starts by integrating the workaround check into the packet length check. It rounds out the implementation by relaxing the workaround restrictions if the platform has efficient unaligned accesses. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Reduce 57765 core clock when link at 10MbpsMatt Carlson2010-04-13
| | | | | | | | | | This patch reduces the core clock to 6.25MHz when operating at 10Mbps link speed. This is needed to prevent a bug that will ultimately cause transmits to cease. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Set card 57765 card reader MRRS to 1024BMatt Carlson2010-04-13
| | | | | | | | | This patch sets the Maximum Read Request Size for the card reader function to 1024 bytes to prevent an SD controller lockup. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Disable CLKREQ in L2Matt Carlson2010-04-13
| | | | | | | | This patch disables CLKREQ in L2 to workaround a chipset bug. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add hardware TX timestamping supportManfred Rudigier2010-04-13
| | | | | | | | | | | | | | | If a packet has the skb_shared_tx->hardware flag set the device is instructed to generate a TX timestamp and write it back to memory after the frame is transmitted. During the clean_tx_ring operation the timestamp will be extracted and copied into the skb_shared_hwtstamps struct of the skb. TX timestamping is enabled by setting the tx_type to something else than HWTSTAMP_TX_OFF with the SIOCSHWTSTAMP ioctl command. It is only supported by eTSEC devices. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add hardware RX timestamping supportManfred Rudigier2010-04-13
| | | | | | | | | | | | | | | The device is configured to insert hardware timestamps into all received packets. The RX timestamps are extracted from the padding alingment bytes during the clean_rx_ring operation and copied into the skb_shared_hwtstamps struct of the skb. This extraction only happens if the rx_filter was set to something else than HWTSTAMP_FILTER_NONE with the SIOCSHWTSTAMP ioctl command. Hardware timestamping is only supported for eTSEC devices. To indicate device support the new FSL_GIANFAR_DEV_HAS_TIMER flag was introduced. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* Add non-Virtex5 support for LL TEMAC driverJohn Linn2010-04-13
| | | | | | | | | | | | | | | | This patch adds support for using the LL TEMAC Ethernet driver on non-Virtex 5 platforms by adding support for accessing the Soft DMA registers as if they were memory mapped instead of solely through the DCR's (available on the Virtex 5). The patch also updates the driver so that it runs on the MicroBlaze. The changes were tested on the PowerPC 440, PowerPC 405, and the MicroBlaze platforms. Signed-off-by: John Tyner <jtyner@cs.ucr.edu> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ll_temac: remove virt_to_bus callJohn Linn2010-04-13
| | | | | | | | | | | The virt_to_bus call should not be used any longer as it's considered illegal. The driver has the physical address of the buffer in the descriptor such that it's not necessary anyway. Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* r6040: use (dev|netdev)_<level> macros helpersFlorian Fainelli2010-04-13
| | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: Add esd board support to plx_pci CAN driverMatthias Fuchs2010-04-13
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for SJA1000 based PCI CAN interface cards from electronic system design gmbh. Some changes have been done on the common code: - esd boards must not have the 2nd local interupt enabled (PLX9030/9050) - a new path for PLX9056/PEX8311 chips has been added - new plx9056 reset function has been implemented - struct plx_card_info got a reset function entry In detail the following additional boards are now supported: CAN-PCI/200 (PCI) CAN-PCI/266 (PCI) CAN-PMC266 (PMC module) CAN-PCIe/2000 (PCI Express) CAN-CPCI/200 (Compact PCI, 3U) CAN-PCI104 (PCI104) Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-04-11
|\ | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
| * Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2010-04-11
| |\
| | * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-04-06
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ...
| | * | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
| | * | iwlwifi: don't include iwl-dev.h from iwl-devtrace.hTejun Heo2010-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iwl-devtrace.h is used to declare and define trace points and including iwl-dev.h from the file, which in turn includes other generic headers, can lead to problems like generating duplicate copies of generic trace points depending on the order of includes. Don't include iwl-dev.h from iwl-devtrace.h but include it from its users - iwl-io.h and iwl-devtrace.c. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Intel Linux Wireless <ilw@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com>
| * | | Merge branch 'master' of ↵David S. Miller2010-04-09
| |\ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * | | iwlwifi: need check for valid qos packet before freeWey-Yi Guy2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 4965, need to check it is valid qos frame before free, only valid QoS frame has the tid used to free the packets. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | | myri10ge: fix rx_pause in myri10ge_set_pauseparamBrice Goglin2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix rx_pause management in myri10ge_set_pauseparam(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | stmmac: use resource_size()Dan Carpenter2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Resource size should be calculated as end - start + 1 because we start counting at zero. I changed the code to resource_size() to do the calculation. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | cnic: Fix crash during bnx2x MTU change.Michael Chan2010-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cnic_service_bnx2x() irq handler can be called during chip reset from MTU change. Need to check that the cnic's device state is up before handling the irq. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | qlcnic: fix set mac addrAmit Kumar Salecha2010-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If interface is down, mac address request are not sent to fw but it is getting add in driver mac list. Driver mac list should be in sync with fw i.e addresses communicated to fw. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | r6040: fix r6040_multicast_listFlorian Fainelli2010-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported in <https://bugzilla.kernel.org/show_bug.cgi?id=15355>, r6040_ multicast_list currently crashes. This is due a wrong maximum of multicast entries. This patch fixes the following issues with multicast: - number of maximum entries if off-by-one (4 instead of 3) - the writing of the hash table index is not necessary and leads to invalid values being written into the MCR1 register, so the MAC is simply put in a non coherent state - when we exceed the maximum number of mutlticast address, writing the broadcast address should be done in registers MID_1{L,M,H} instead of MID_O{L,M,H}, otherwise we would loose the adapter's MAC address Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | Merge branch 'master' of ↵David S. Miller2010-04-07
| |\| | | | | |_|/ | |/| | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * | ath9k: fix double calls to ath_radio_enableFelix Fietkau2010-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the enable_radio being uninitialized, ath_radio_enable() might be called twice, which can leave some hardware in an undefined state. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | iwlwifi: avoid Tx queue memory allocation in interface downZhu Yi2010-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We used to free all the Tx queues memory when interface is brought down and reallocate them again in interface up. This requires order-4 allocation for txq->cmd[]. In situations like s2ram, this usually leads to allocation failure in the memory subsystem. The patch fixed this problem by allocating the Tx queues memory only at the first time. Later iwl_down/iwl_up only initialize but don't free and reallocate them. The memory is freed at the device removal time. BTW, we have already done this for the Rx queue. This fixed bug https://bugzilla.kernel.org/show_bug.cgi?id=15551 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| | * | iwlwifi: use consistent table for tx data collectShanyu Zhao2010-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When collecting tx data for non-aggregation packets in rate scaling, if the tx data matches "other table", it still uses current table to update the stats and calculate average throughput in function rs_collect_tx_data(). This can mess up the rate scaling data structure and cause a kernel panic in a BUG_ON statement in rs_rate_scale_perform(). To fix this bug, we pass table pointer instead of window pointer (pointed to by table pointer) to function rs_collect_tx_data() so that the table being used is consistent. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Henry Zhang <hongx.c.zhang@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| | * | iwlwifi: fix DMA allocation warningsZhu Yi2010-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Below warning is triggered sometimes at module removal time when CONFIG_DMA_API_DEBUG is enabled. This should be caused by we didn't unmap pending commands (enqueued, but no complete notification received) for the Tx command queue. [ 1583.107469] ------------[ cut here ]------------ [ 1583.107539] WARNING: at lib/dma-debug.c:688 dma_debug_device_change+0x13c/0x180() [ 1583.107617] Hardware name: ... [ 1583.107664] pci 0000:04:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] [ 1583.107713] Modules linked in: ... [ 1583.111661] Pid: 16970, comm: modprobe Tainted: G W 2.6.34-rc1-wl #33 [ 1583.111727] Call Trace: [ 1583.111779] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111833] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111908] [<c0138e11>] warn_slowpath_common+0x71/0xd0 [ 1583.111963] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.112016] [<c0138ebb>] warn_slowpath_fmt+0x2b/0x30 [ 1583.112086] [<c02a281c>] dma_debug_device_change+0x13c/0x180 [ 1583.112142] [<c03e6c33>] notifier_call_chain+0x53/0x90 [ 1583.112198] [<c03e1ebe>] ? down_read+0x6e/0x90 [ 1583.112271] [<c015b229>] __blocking_notifier_call_chain+0x49/0x70 [ 1583.112326] [<c015b26f>] blocking_notifier_call_chain+0x1f/0x30 [ 1583.112380] [<c031931c>] __device_release_driver+0x8c/0xa0 [ 1583.112451] [<c03193bf>] driver_detach+0x8f/0xa0 [ 1583.112538] [<c0318382>] bus_remove_driver+0x82/0x100 [ 1583.112595] [<c0319ad9>] driver_unregister+0x49/0x80 [ 1583.112671] [<c024feb2>] ? sysfs_remove_file+0x12/0x20 [ 1583.112727] [<c02aa292>] pci_unregister_driver+0x32/0x80 [ 1583.112791] [<fc13a3c1>] iwl_exit+0x12/0x19 [iwlagn] [ 1583.112848] [<c017940a>] sys_delete_module+0x15a/0x210 [ 1583.112870] [<c015a5db>] ? up_read+0x1b/0x30 [ 1583.112893] [<c029600c>] ? trace_hardirqs_off_thunk+0xc/0x10 [ 1583.112924] [<c0295ffc>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 1583.112947] [<c03e6a1f>] ? do_page_fault+0x1ff/0x3c0 [ 1583.112978] [<c03e36f6>] ? restore_all_notrace+0x0/0x18 [ 1583.113002] [<c016aa70>] ? trace_hardirqs_on_caller+0x20/0x190 [ 1583.113025] [<c0102d58>] sysenter_do_call+0x12/0x38 [ 1583.113054] ---[ end trace fc23e059cc4c2ced ]--- Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | | | vxge: Version update.Sreenivasa Honnur2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Version update. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com>
* | | | vxge: Pass correct number of VFs value to pci_sriov_enable().Sreenivasa Honnur2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - max_config_dev loadable parameter is set to 0xFF by default. Pass correct number of VFs value to pci_sriov_enable() if max_config_dev is set to its default value. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | vxge: Allow driver load for all enumerated pci functions.Sreenivasa Honnur2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Allow all instances of the driver be loaded when multiple pci functions are enumerated. The max_config_dev driver loadable option limits the driver load instances if required. The X3100's function configuration of single/multi function, SR and MR IOV allows the user to select the number of pci functions. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | vxge: Fix a possible memory leak in vxge_hw_device_initialize().Sreenivasa Honnur2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix a possible memory leak in vxge_hw_device_initialize(). Free hldev if vxge_hw_device_reg_addr_get() fails. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-10 13:24:33 -0400