aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
Commit message (Collapse)AuthorAge
* Merge branch 'master' of ↵John W. Linville2013-01-23
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * mwifiex: fix typo in PCIe adapter NULL checkAvinash Patil2013-01-22
| | | | | | | | | | | | | | | | | | | | | | Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Cc: "3.2+" <stable@vger.kernel.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Sergey V. <sftp.mtuci@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: allow setting arbitrary antenna masks on AR9003+Felix Fietkau2013-01-22
| | | | | | | | | | | | Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: fix chain swap setting when setting rx chainmask to 5Felix Fietkau2013-01-22
| | | | | | | | | | | | | | | | | | Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: fix calibration issues on chainmask that don't include chain 0Felix Fietkau2013-01-22
| | | | | | | | | | | | Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtlwifi: Fix build warning introduced by commit a290593Larry Finger2013-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kbuild test robot reports the following warning with x86_64-randconfig-x955: warning: (RTL8192CE && RTL8192SE && RTL8192DE && RTL8723AE && RTL8192CU) selects RTLWIFI which has unmet direct dependencies (NETDEVICES && WLAN && (RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE)) This warning was introduced in commit a290593, "rtlwifi: Modify files for addition of rtl8723ae", and is d ue to a missing dependence of RTLWIFI on RTL8723AE. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: kbuild test robot <fengguang.wu@intel.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlegacy: fix IBSS cleanupStanislaw Gruszka2013-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | We do not correctly change interface type when switching from IBSS mode to STA mode, that results in microcode errors. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=886946 Reported-by: Jaroslav Skarvada <jskarvad@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * Merge branch 'for-john' of ↵John W. Linville2013-01-22
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
| | * iwlwifi: audit single frames from AGG queue in RSEmmanuel Grumbach2013-01-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rate scaling won't treat the information in a frame with IEEE80211_TX_CTL_AMPDU set if IEEE80211_TX_STAT_AMPDU is cleared. But all the frames coming from an AGG tx queue have IEEE80211_TX_CTL_AMPDU set, and IEEE80211_TX_STAT_AMPDU is set only if the frame was sent in an AMPDU. This means that all the data in frames in AGG tx queues that aren't sent as an AMPDU is thrown away. This is even more harmful when in bad link conditions, the frames are sent in an AMPDU and then finally sent as single frame. So a lot of failures weren't reported and the rate scaling got stuck in high rates leading to very poor connectivity. Fix that by clearing IEEE80211_TX_CTL_AMPDU when the frame isn't part of an AMPDU. This bug was introduced by 2eb81a40aa521035ff9c8c8309e482dff523f8c9 iwlwifi: don't clear CTL_AMPDU on frame status This fix basically reverts the aforementioned commit. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | Merge branch 'master' of ↵John W. Linville2013-01-17
|\| | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * | ath9k: disable the tasklet before taking the PCU lockFelix Fietkau2013-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes a reported CPU soft lockup where the tasklet tries to acquire the lock and blocks while ath_prepare_reset (holding the lock) waits for it to complete. Cc: stable@vger.kernel.org Reported-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: remove sc->rx.rxbuflock to fix a deadlockFelix Fietkau2013-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit "ath9k: fix rx flush handling" added a deadlock that happens because ath_rx_tasklet is called in a section that has already taken the rx buffer lock. It seems that the only purpose of the rxbuflock was a band-aid fix to the reset vs rx tasklet race, which has been properly fixed in the commit "ath9k: add a better fix for the rx tasklet vs rx flush race". Now that the fix is in, we can safely remove the lock to avoid such issues. Cc: stable@vger.kernel.org Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | brcmsmac: increase timer reference count for new timers onlyPiotr Haber2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Cc: stable@vger.kernel.org Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: fix rx flush handlingFelix Fietkau2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now the rx flush is not doing anything useful on AR9003+, as it only works if the buffers in the rx FIFO have not been purged yet, as is done by ath_stoprecv. To fix this, always call ath_flushrecv from within ath_stoprecv before the FIFO is emptied, but still after the hw receive path has been stopped. This ensures that frames received (and ACKed by the hardware) shortly before a reset will be seen by the software, which should improve A-MPDU session stability. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: add a better fix for the rx tasklet vs rx flush raceFelix Fietkau2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that the rx tasklet is no longer running when entering the reset path. Also remove the distinction between flush and no-flush frame processing. If a frame has been received and ACKed by the hardware, the stack needs to see it, so that the BA receive window does not go out of sync. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: remove the WARN_ON that triggers if generating a beacon failsFelix Fietkau2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During teardown, mac80211 will not return a new beacon. This is normal and handled properly in the driver, so there's no need to spam the user with a kernel warning here. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: fix double-free bug on beacon generate failureFelix Fietkau2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the next beacon is sent, the ath_buf from the previous run is reused. If getting a new beacon from mac80211 fails, bf->bf_mpdu is not reset, yet the skb is freed, leading to a double-free on the next beacon tx attempt, resulting in a system crash. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: do not link receive buffers during flushFelix Fietkau2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On AR9300 the rx FIFO needs to be empty during reset to ensure that no further DMA activity is generated, otherwise it might lead to memory corruption issues. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k_htc: Fix memory leakSujith Manoharan2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SKBs that are allocated in the HTC layer do not have callbacks registered and hence ended up not being freed, Fix this by freeing them properly in the TX completion routine. Cc: <stable@vger.kernel.org> Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mwifiex: correct config_bands handling for ibss networkAmitkumar Karwar2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | BAND_G is implicit when BAND_GN is present. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mwifiex: update config_bands during infra associationAmitkumar Karwar2013-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently "adapter->config_bands" is updated during infra association only if channel is provided by user in "iw connect" command. config_bands is used while preparing association request to calculate supported rates by intersecting our rates with the rates advertised by AP. There is corner case in which we include zero rates in supported rates TLV based on previous IBSS network history, which leads to association failure. This patch fixes the problem by correctly updating config_bands. Cc: "3.7.y" <stable@vger.kernel.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | Merge branch 'master' of ↵John W. Linville2013-01-09
|\| | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * | b43: Fix firmware loading when driver is built into the kernelLarry Finger2013-01-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space would time out. The original fix for b43 (commit 6b6fa58) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43 is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. This driver reads several firmware files - the remainder can be read synchronously. On some test systems, the async read fails; however, a following synch read works, thus the async failure falls through to the sync try. Reported-and-Tested by: Felix Janda <felix.janda@posteo.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> (V3.4+) Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | drivers/net/wireless/iwlegacy: use strlcpy instead of strncpyChen Gang2013-01-07
| | | | | | | | | | | | | | | | | | | | | The fields must be null-terminated, or simple_strtoul will cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | drivers/net/wireless/mwl8k.c: avoid use-after-freeNickolai Zeldovich2013-01-07
| | | | | | | | | | | | | | | | | | | | | | | | Do not dereference p->station_id after kfree(cmd) because p points into the cmd data structure. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: Fix typo in debug output of rtl8192c and rtl8723aeJulian Wollrath2013-01-07
| | | | | | | | | | | | | | | | | | Signed-off-by: Julian Wollrath <jwollrath@web.de> Acked-by: Larry Finger <Larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | wireless: add new wil6210 802.11ad 60GHz driverVladimir Kondratiev2013-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mwifiex: fix typo in setting up ibss network parametersAmitkumar Karwar2013-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 683b6d3... "cfg80211: pass a channel definition struct" accidentally changed "==" to "!=". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mwifiex: check wait_event_interruptible return valueBing Zhao2013-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wait_event_interruptible function returns -ERESTARTSYS if it's interrupted by a signal. Driver should check the return value and handle this case properly. In mwifiex_wait_queue_complete() routine, as we are now checking wait_event_interruptible return value, the condition check is not required. Also, we have removed mwifiex_cancel_pending_ioctl() call to avoid a chance of sending second command to FW by other path as soon as we clear current command node. FW can not handle two commands simultaneously. Cc: "3.6+" <stable@vger.kernel.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | Merge branch 'for-john' of ↵John W. Linville2013-01-04
| |\| | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
| | * iwlwifi: fix the reclaimed packet tracking upon flush queueEmmanuel Grumbach2013-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a bug in the currently released firmware version, the sequence control in the Tx response isn't updated in all cases. Take it from the packet as a workaround. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: fix PCIe interrupt handle return valueJohannes Berg2013-01-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By accident, commit eb6476441bc2fecf6232a87d0313a85f8e3da7f4 ("iwlwifi: protect use_ict with irq_lock") changed the return value of the iwl_pcie_isr() function in case it handles an interrupt -- it now returns IRQ_NONE instead of IRQ_HANDLED. Put back the correct return value. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | Merge branch 'master' of ↵John W. Linville2013-01-04
|\| | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| * | ath9k: Fix Kconfig for ATH9K_HTCVladimir Kondratiev2013-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ath9k consists of 2 different sub-modules: ATH9K and ATH9K_HTC. Both uses common Atheros code from ath.ko and need ATH_COMMON. However, while ATH9K selects ATH_COMMON, ATH9K_HTC does not. As result, if ATH9K_HTC is the only Atheros card selected, compilation fails with unresolved symbols. This patch moves ATH_COMMON selection to the common part for both ATH9K and ATH9K_HTC Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | brcmfmac: fix parsing rsn ie for ap mode.Hante Meuleman2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RSN IEs got incorrectly parsed and therefore ap mode using WPA2 security was not working. Cc: stable@vger.kernel.org Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | brcmsmac: add copyright information for CanonicalArend van Spriel2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patches from Canonical involved the introduction of new source files debug.[ch]. That coincided with other patches from Broadcom introducing the same files. Cc: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: Fix warning for unchecked pci_map_single() callLarry Finger2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | Kernel 3.8 implements checking of all DMA mapping calls and issues a WARNING for the first it finds that is not checked. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | p54usb: add USBIDs for two more p54usb devicesChristian Lamparter2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds USBIDs for: - DrayTek Vigor 530 - Zoom 4410a It also adds a note about Gemtek WUBI-100GW and SparkLAN WL-682 USBID conflict [WUBI-100GW is a ISL3886+NET2280 (LM86 firmare) solution, whereas WL-682 is a ISL3887 (LM87 firmware)] device. Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows> Cc: <stable@vger.kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: Don't leak on error in _rtl_usb_receive()Jesper Juhl2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We fail to release 'urb' if '_rtl_prep_rx_urb()' fails in _rtl_usb_receive(). This patch should take care of the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k_hw: Fix RX gain initvals for AR9485Sujith Manoharan2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | Populate iniModesRxGain with the correct initvals array for AR9485 v1.1 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | brcmsmac: Use udelay instead of usleep_rangeNiels Ole Salscheider2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wlc_lcnphy_rx_iq_cal_gain is called during initialization, i. e. when executing brcms_up. But brcms_up is called from brcms_ops_start while the latter holds a spin lock. Thus, we cannot use usleep_range but have to use udelay. This fixes: BUG: scheduling while atomic: NetworkManager/1652/0x00000200 [...] Call Trace: [<ffffffff81582522>] __schedule_bug+0x48/0x54 [<ffffffff815892b6>] __schedule+0x596/0x6d0 [<ffffffff81589719>] schedule+0x29/0x70 [<ffffffff8158893c>] schedule_hrtimeout_range_clock+0xfc/0x140 [<ffffffff81060f10>] ? update_rmtp+0x70/0x70 [<ffffffff81588993>] schedule_hrtimeout_range+0x13/0x20 [<ffffffff810495e0>] usleep_range+0x40/0x50 [<ffffffffa05dedcb>] wlc_lcnphy_rx_iq_cal.constprop.10+0x59b/0xa90 [brcmsmac] [<ffffffffa05df4ce>] wlc_lcnphy_periodic_cal+0x20e/0x220 [brcmsmac] [<ffffffffa05dce8d>] ? wlc_lcnphy_set_tx_pwr_ctrl+0x21d/0x3c0 [brcmsmac] [<ffffffffa05e0cfc>] wlc_phy_init_lcnphy+0xacc/0x1100 [brcmsmac] [<ffffffffa05e0230>] ? wlc_phy_txpower_recalc_target_lcnphy+0x90/0x90 [brcmsmac] [<ffffffffa05d7c7d>] wlc_phy_init+0xcd/0x170 [brcmsmac] [<ffffffffa05c9dfe>] brcms_b_bsinit.isra.65+0x12e/0x310 [brcmsmac] [<ffffffffa05d061b>] brcms_c_init+0x8fb/0x1170 [brcmsmac] [<ffffffffa05c3a0a>] brcms_init+0x5a/0x70 [brcmsmac] [<ffffffffa05ce76c>] brcms_c_up+0x1ac/0x4a0 [brcmsmac] [<ffffffffa05c3c65>] brcms_up+0x25/0x30 [brcmsmac] [<ffffffffa05c44c0>] brcms_ops_start+0xd0/0x100 [brcmsmac] [...] Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | p54usb: add USB ID for T-Com Sinus 154 data IITomasz Guszkowski2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added USB ID for T-Com Sinus 154 data II. Cc: <stable@vger.kernel.org> Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | carl9170: fix -EINVAL bailout during init with !CONFIG_MAC80211_MESHChristian Lamparter2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sean reported that as of 3.7, his AR9170 device no longer works because the driver fails during initialization. He noted this is due to: "In carl9170/fw.c, ar->hw->wiphy is tagged with NL80211_IFTYPE_MESH_POINT support if the firmware has Content after Beacon Queuing. This is both in interface_modes and the only iface_combinations entry. If CONFIG_MAC80211_MESH is not set, ieee80211_register_hw removes NL80211_IFTYPE_MESH_POINT from interface_modes, but not iface_combinations. wiphy_register then checks to see if every interface type in every interface combination is in interface_modes. NL80211_IFTYPE_MESH_POINT was removed, so you get a WARN_ON warning and it returns -EINVAL, giving up." Unfortunately, the iface_combination (types) feature bitmap in ieee80211_iface_limit is part of a const member in the ieee80211_iface_combination struct. Hence, the MESH_POINT feature flag can't be masked by wiphy_register in the same way as interface_modes in ieee80211_register_hw. Cc: <stable@vger.kernel.org> Reported-by: Sean Patrick Santos <quantheory@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Tested-by: Sean Patrick Santos <quantheory@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | rtlwifi: fix incorrect use of usb_alloc_coherent with usb_control_msgJussi Kivilinna2013-01-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorrect use of usb_alloc_coherent memory as input buffer to usb_control_msg can cause problems in arch DMA code, for example kernel BUG at 'arch/arm/include/asm/dma-mapping.h:321' on ARM (linux-3.4). Change _usb_writeN_sync use kmalloc'd buffer instead. Cc: stable@vger.kernel.org Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: Fix compilation breakageSujith Manoharan2013-01-02
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since ath9k makes use of mac80211's debugfs hooks to maintain station statistics, make ATH9K_DEBUGFS select MAC80211_DEBUGFS. This fixes the issue reported by Fengguang Wu: drivers/net/wireless/ath/ath9k/debug.c: In function 'ath9k_sta_add_debugfs': drivers/net/wireless/ath/ath9k/debug.c:1589:4: error: 'struct ath_node' has no member named 'node_stat' drivers/net/wireless/ath/ath9k/debug.c: In function 'ath9k_sta_remove_debugfs': drivers/net/wireless/ath/ath9k/debug.c:1599:19: error: 'struct ath_node' has no member named 'node_stat' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* / Drivers: network: more __dev* removalGreg KH2012-12-22
|/ | | | | | | | | Remove some __dev* markings that snuck in the 3.8-rc1 merge window in the drivers/net/* directory. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-26 03:56:57 -0500