aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
Commit message (Collapse)AuthorAge
* iwlagn: fix needed chains calculationJohannes Berg2010-11-15
| | | | | | | | | | | Garen noticed that this was wrong. Fix the calibration -- default to multiple chains and fall back to single where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: resending QoS command when HT changesWey-Yi Guy2010-11-15
| | | | | | | | | | | | | | | | "mac80211: Fix WMM driver queue configuration" inadvertedly broke iwlwifi, because now mac80211 configures the QoS settings before assoc, and therefore before HT. Thus, iwlwifi no longer told the device about the HT setting, which it needs to -- and thus throughput went down a lot. Fix this by resending the QoS command to the device not only when QoS/WMM settings change, but also when HT changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwlifi: update rx write pointer w/o request mac access in the CAM modeWinkler, Tomas2010-11-15
| | | | | | | | | | In iwl_rx_queue_update_write_ptr function replace iwl_write_direct32 with iwl_write32 when not in power save mode. We don't have to go through grab nic access as the NIC is already awake. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: legacy tx_cmd_protection functionWey-Yi Guy2010-11-15
| | | | | | | | Legacy (4965 and 3945) devices has different tx_cmd_protection routine. Move to iwl-legacy.c Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: put all the isr related function under opsWey-Yi Guy2010-11-15
| | | | | | | | | | | | There were two type of isr supported by iwlwifi devices. legacy isr - only used by legacy devices (3945 & 4965) ict isr - used by all new generation of iwlwifi devices Move all the isr related functions into ops, the ict type of isr supports only needed for newer devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Legacy isr only used by legacy devicesWey-Yi Guy2010-11-15
| | | | | | | | Move iwl_isr_legacy function to iwl_legacy.c since it only used by legacy devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: fix non-5000+ buildJohannes Berg2010-11-15
| | | | | | | | | | | | When building 4965 without 5000+ there were a lot of build errors due to functions being used that weren't even compiled in. To fix this move some code around and only compile the HCMD code for 5000+ series as it's not used for 4965. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: update PCI ID for 100 series devicesWey-Yi Guy2010-11-15
| | | | | | | Update the supported PCI ID list for 100 series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: update PCI ID for 6000g2a series devicesWey-Yi Guy2010-11-15
| | | | | | | Update the supported PCI ID list for 6000g2a series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: update PCI ID for 6000g2b series devicesWey-Yi Guy2010-11-15
| | | | | | | Update the supported PCI ID list for 6000g2b series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Print stats as unsigned ints.Ben Greear2010-11-15
| | | | | | | | | The debugfs code for ath5k was printing some unsigned int stats with %d instead of %u. This meant that you could see negative numbers instead of a clean wrap. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add watchdog functions for HW queueIvo van Doorn2010-11-15
| | | | | | | | | | | | | | | Add watchdog functions for managing the Queues inside the hardware. Normally the driver doesn't have much to do with these queues directly, but the Ralink drivers did implement watchdog functions for these. These watchdog functions are not triggered that often, compared to the other watchdog functions, but I have at least seen them trigger once or twice during a long stresstest run. v2: Add extra documentation for register fields Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove rt2x00lib_toggle_rxIvo van Doorn2010-11-15
| | | | | | | | | | | | | | | As part of the queue refactoring, the rt2x00lib_toggle_rx can be removed and replaced with the call directly to the set_device_state callback function. We can remove the STATE_RADIO_RX_ON_LINK and STATE_RADIO_RX_OFF_LINK, as it was only used for special behavior inside rt2x00lib rather then the drivers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix rt2x00queue_kick_tx_queue argumentsIvo van Doorn2010-11-15
| | | | | | | | | | | | The queue_entry argument to rt2x00queue_kick_tx_queue, doesn't make sense due to the function name (it is called kick QUEUE)... But neither do we need the queue_entry, since we need the data_queue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Rename queue->lock to queue->index_lockIvo van Doorn2010-11-15
| | | | | | | | | The queue->lock is only used to protect the index numbers. Rename the lock accordingly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt73usb.cMark Einon2010-11-15
| | | | | | | | rt73usb.c:43: ERROR: do not initialise statics to 0 or NULL Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2x00queue.cMark Einon2010-11-15
| | | | | | | | | rt2x00queue.c:804: ERROR: space prohibited after that open parenthesis '(' rt2x00queue.c:805: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2x00link.cMark Einon2010-11-15
| | | | | | | | rt2x00link.c:70: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2x00lib.hMark Einon2010-11-15
| | | | | | | | | rt2x00lib.h:60: ERROR: space prohibited after that open parenthesis '(' rt2x00lib.h:60: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2x00dev.cMark Einon2010-11-15
| | | | | | | | rt2x00dev.c:689: ERROR: spaces required around that '=' (ctx:WxV) Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2x00config.cMark Einon2010-11-15
| | | | | | | | rt2x00config.c:136: ERROR: space required before the open parenthesis '(' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2800usb.hMark Einon2010-11-15
| | | | | | | | | | | rt2800usb.h:43: ERROR: space prohibited after that open parenthesis '(' rt2800usb.h:43: ERROR: space prohibited before that close parenthesis ')' rt2800usb.h:44: ERROR: space prohibited after that open parenthesis '(' rt2800usb.h:44: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2800usb.cMark Einon2010-11-15
| | | | | | | | rt2800usb.c:48: ERROR: do not initialise statics to 0 or NULL Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2800pci.hMark Einon2010-11-15
| | | | | | | | | | | | | | | rt2800pci.h:41: ERROR: Macros with complex values should be enclosed in parenthesis rt2800pci.h:42: ERROR: Macros with complex values should be enclosed in parenthesis rt2800pci.h:43: ERROR: Macros with complex values should be enclosed in parenthesis rt2800pci.h:44: ERROR: Macros with complex values should be enclosed in parenthesis rt2800pci.h:55: ERROR: space prohibited after that open parenthesis '(' rt2800pci.h:55: ERROR: space prohibited before that close parenthesis ')' rt2800pci.h:56: ERROR: space prohibited after that open parenthesis '(' rt2800pci.h:56: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2800lib.cMark Einon2010-11-15
| | | | | | | | rt2800lib.c:831: ERROR: inline keyword should sit between storage class and type Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2800.hMark Einon2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | rt2800.h:1511: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1511: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1513: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1513: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1515: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1515: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1517: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1517: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1519: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1519: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1521: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1521: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1661: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1661: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1662: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1662: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1663: ERROR: space prohibited before that close parenthesis ')' rt2800.h:2013: ERROR: space prohibited after that open parenthesis '(' rt2800.h:2013: ERROR: space prohibited before that close parenthesis ')' rt2800.h:2014: ERROR: space prohibited after that open parenthesis '(' rt2800.h:2014: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2500usb.cMark Einon2010-11-15
| | | | | | | | rt2500usb.c:42: ERROR: do not initialise statics to 0 or NULL Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2500pci.hMark Einon2010-11-15
| | | | | | | | | | | rt2500pci.h:1091: ERROR: space prohibited after that open parenthesis '(' rt2500pci.h:1091: ERROR: space prohibited before that close parenthesis ')' rt2500pci.h:1092: ERROR: space prohibited after that open parenthesis '(' rt2500pci.h:1092: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: checkpatch.pl error fixes for rt2400pci.hMark Einon2010-11-15
| | | | | | | | | | | | rt2400pci.h:812: ERROR: space prohibited after that open parenthesis '(' rt2400pci.h:812: ERROR: space prohibited before that close parenthesis ')' rt2400pci.h:813: ERROR: space prohibited after that open parenthesis '(' rt2400pci.h:813: ERROR: space prohibited before that close parenthesis ')' rt2400pci.h:950: ERROR: Macros with complex values should be enclosed in parenthesis Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* carl9170: tx path reviewChristian Lamparter2010-11-15
| | | | | | | | | | | | | | | | | | This patch fixes a few shortcomings in the tx path. * move temp. ampdu_[ack]_len out of txinfo->pad. * fix WARN_ON from tx.c:line 300 when tx_ampdu_queue fails to queue the frame. * In tx_prepare, we already have a local pointer to the station's ieee80211_sta struct. * remove a second !sta check, tx_prepare already takes care of that. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix comments in rt73usb.h and rt61pci.hLalith Suresh2010-11-15
| | | | | | | | This patch fixes a few comments in rt73usb.h and rt61pci.h. Signed-off-by: Lalith Suresh <suresh.lalith@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix hw crypto in AP mode for some devicesHelmut Schaa2010-11-15
| | | | | | | | | | | | | | | | | | | The BSSID register shouldn't be set in AP mode on some older devices (like rt73usb) as it breaks hw crypto on these. However, rt2800 devices explicitly need the BSSID register set to the same value as our own MAC address (only in AP mode). Hence, don't set the BSSID from rt2x00lib but move it down into rt2800 to avoid problems on older devices. This fixes a regression (at least for rt73usb) and avoids a new regression for rt2800 devices in 2.6.36. Reported-by: Johannes Stezenbach <js@sig21.net> Reported-by: Lee <lee-in-berlin@web.de> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix crash on USB unplugIvo van Doorn2010-11-15
| | | | | | | | | | | | | By not scheduling the TX/RX completion worker threads when Radio is disabled, or hardware has been unplugged, the queues cannot be completely cleaned. This causes crashes when the hardware has been unplugged while the radio is still enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix MCU_SLEEP argumentsIvo van Doorn2010-11-15
| | | | | | | | | | | Legacy driver uses 0xff as the second argument for the MCU_SLEEP command. It is still unknown what the values actually mean, but this will at least keep the command in-sync with the original driver. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Implement flush callbackIvo van Doorn2010-11-15
| | | | | | | | | | | | | | | Implement a basic flush callback function, which simply loops over all TX queues and waits until all frames have been transmitted and the status reports have been gathered. At this moment we don't support dropping any frames during the flush, but mac80211 will only send 'false' for this argument anyway, so this is not important at this time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove failsave from rt2x00usb_watchdog_tx_dmaIvo van Doorn2010-11-15
| | | | | | | | | | | | | When the TX status handler failed to clear the queue in rt2x00usb_watchdog_tx_dma() we shouldn't use a failsave to use the rt2x00usb txdone handler. If a driver has overriden the txdone handler it must make sure the txdone handler is capable of cleaning up the queue itself. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Rename rt2x00queue_timeoutIvo van Doorn2010-11-15
| | | | | | | | | | | Rename rt2x00queue_timeout to rt2x00queue_status_timeout to better describe what is actually timing out (note that we already have a rt2x00queue_dma_timeout). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Optimize rt2x00debug_dump_frame when frame dumping is not activeHelmut Schaa2010-11-15
| | | | | | | | | | When rt2x00 is compiled with debugging but frame dumping is currently not active we can avoid the call to do_gettimeofday. Furthermore, frame dumping is not the default case, mark it as unlikely. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Reduce tx descriptor sizeHelmut Schaa2010-11-15
| | | | | | | | | | | The tx descriptor values qid, cw_min, cw_max and aifs are directly accessible through the tx entry struct. So there's no need to copy them into the tx descriptor and passing them to the indiviual drivers. Instead we can just get the correct value from the tx entry. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Wait up to one second on rt2800 for WPDMA to be readyHelmut Schaa2010-11-15
| | | | | | | | | | | At least some devices need such a long time to inititalize WPDMA. This only increases the maximum wait time and shouldn't affect devices that have been working before. Reported-by: Joshua Smith <jesmith@kaon.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Sync Tx and RX ring sizes with legacy driversHelmut Schaa2010-11-15
| | | | | | | | | | | | | | | | | All rt2x00 devices used the same Tx and Rx ring size (24 entries) till now. Newer devices (like rt2800) can however make use of a larger TX and RX ring due to 11n capabilities (AMPDUs of size 64 for example). Hence, bring rt2x00 in sync with the legacy drivers and use the same TX and RX ring sizes. Also remove the global defines RX_ENTRIES, TX_ENTRIES, BEACON_ENTRIES and ATIM_ENTRIES and use per driver values. That is 24 entries for rt2400pci, 32 entries for rt2500pci, rt2500usb, rt61pci and rt73usb and 128 (RX) and 64 (TX) for rt2800pci and rt2800usb. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add TXOP_CTRL_CFG register definitionHelmut Schaa2010-11-15
| | | | | | | | | | | Remove the magic value initialisation of the TXOP_CTRL_CFG register by defining its fields and using them during intialisation. The field RESERVED_TRUN_EN is referred to as reserved, however it is set to 1 by the legacy drivers. Hence, do the same. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: rework tx queue selection and fix queue stopping/wakingFelix Fietkau2010-11-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current ath9k tx queue handling code showed a few issues that could lead to locking issues, tx stalls due to stopped queues, and maybe even DMA issues. The main source of these issues is that in some places the queue is selected via skb queue mapping in places where this mapping may no longer be valid. One such place is when data frames are transmitted via the CAB queue (for powersave buffered frames). This is made even worse by a lookup WMM AC values from the assigned tx queue (which is undefined for the CAB queue). This messed up the pending frame counting, which in turn caused issues with queues getting stopped, but not woken again. To fix these issues, this patch removes an unnecessary abstraction separating a driver internal queue number from the skb queue number (not to be confused with the hardware queue number). It seems that this abstraction may have been necessary because of tx queue preinitialization from the initvals. This patch avoids breakage here by pushing the software <-> hardware queue mapping to the function that assigns the tx queues and redefining the WMM AC definitions to match the numbers used by mac80211 (also affects ath9k_htc). To ensure consistency wrt. pending frame count tracking, these counters are moved to the ath_txq struct, updated with the txq lock held, but only where the tx queue selected by the skb queue map actually matches the tx queue used by the driver for the frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43legacy: rfkill: use status register based on core revision (not PHY's)Rafał Miłecki2010-11-15
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* zd1201: Add missing idmaximilian attems2010-11-15
| | | | | | | | | | | | | | | | | The Mandriva patch seems to stem from 2.6.14, so much for their upstreaming effort. Didn't find another Linux reference of it, just an omnious "USB\VID_1044&PID_8004" from GigabyteZD1201U.INF for Gigabyte GN-WLBZ101 802.11b USB Adapter, which matches the Mandriva patch comment. Aboves file also lists an "USB\VID_1044&PID_8006", which I have kept appart as this "Gigabyte GN-WBZB-M 802.11b USB Adapter" didn't show up in googling. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* zd1211rw: add 2 missing usb id'smaximilian attems2010-11-15
| | | | | | | | | | | | | "These USB ID came from Palnex <http://www.planex.co.jp/> Worked fine." says Mandriva patch for their 2.6.32 and earlier. Web has evidence for both id's to work, so just add them upstream: http://www.mail-archive.com/zd1211-devs@lists.sourceforge.net/msg00507.html http://ubuntuforums.org/showthread.php?t=473046 Signed-off-by: Go Taniguchi <go@turbolinux.co.jp> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8187: restore anaparam registers after reset with 8187BHerton Ronaldo Krzesinski2010-11-15
| | | | | | | | | | | | | Current 8187B initialization misses anaparam registers restore after 8187 reset. This causes ANAPARAM register to stay zeroed out (ANAPARAM2 kept its value on my tests). To avoid this, call rtl8187_set_anaparam right after chip reset (to be on the safe side, as it makes sure we restore all ANAPARAM registers). Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: seno <senada@t-online.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8187: remove uneeded setting of anaparam writeHerton Ronaldo Krzesinski2010-11-15
| | | | | | | | | | | | Usually you set RTL818X_CONFIG3_ANAPARAM_WRITE when you are going to change/write ANAPARAM registers. But in current initialization of RTL8187B there is a place where ANAPARAM_WRITE bit is set without any ANAPARAM register being written, without reason, so remove it. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: seno <senada@t-online.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8187: consolidate anaparam on/off write sequencesHerton Ronaldo Krzesinski2010-11-15
| | | | | | | | | | There are repeated calls for anaparam on/off sequence in the code. Consolidate the common code in rtl8187_set_anaparam and use it where needed. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8187: don't set RTL818X_CONFIG3_GNT_SELECT flag on 8187BHerton Ronaldo Krzesinski2010-11-15
| | | | | | | | | | | | The GNTSel bit should only concern pci devices by looking at RTL8180 spec, which is not the case of 8187B. Also testing shows that trying to set this bit fails, a subsequent read from the register after trying to set it shows that the bit isn't set, seems the hardware ignores it, which makes sense. This setting was a left over from Realtek sources. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-13 00:18:59 -0400