aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00/rt2800pci.c
Commit message (Collapse)AuthorAge
* rt2x00: Fix optimize register access for rt2800pciIvo van Doorn2011-05-02
| | | | | | | | | | | | The patch rt2x00: Optimize register access in rt2800pci from Helmut Schaa missed one register call, namely the rt2800_register_multiwrite which should be changed to rt2x00pci_register_multiwrite. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Implement get_ringparam callback functionIvo van Doorn2011-04-19
| | | | | | | | | With the get_ringparam callback function we can export ring parameters to ethtool through the mac80211 interface. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Optimize register access in rt2800pciHelmut Schaa2011-04-19
| | | | | | | | | | | | | | | | | | | | All register reads/writes in rt2800pci were previously done with rt2800_register_read/rt2800_register_write. These however indirectly call rt2x00pci_register_read/rt2x00pci_register_write which adds an additional overhead of at least one call and several move instructions to each register access. Replacing the calls to rt2800_register_read/rt2800_register_write with direct calls to rt2x00pci_register_read/rt2x00pci_register_write gets rid of quite a number of instructions in the drivers hotpaths (IRQ handling and txdone handling). For consistency replace all references to rt2800_register_read/write with the rt2x00pci_register_read/write variants. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Allow dynamic addition of PCI/USB IDs.Gertjan van Wingerde2011-04-19
| | | | | | | | | | | | | | | | | | | | | | Both USB and PCI drivers allow a system administrator to dynamically add USB/PCI IDs to the device table that a driver supports via the /sys/bus/{usb,pci,pci_express}/drivers/<driver-name>/new_id files. However, for the rt2x00 drivers using this method currently crashes the system with a NULL pointer failure. This is due to the set-up of rt2x00 where the probe functions require a rt2x00_ops structure in the driver_info field of the probed device. As this field is empty for the dynamically added devices this fails for these devices. Fix this by introducing driver-specific probe wrappers that do nothing but calling the bus-specific probe functions with the rt2x00_ops structure as an argument, rather than depending on the driver_info field. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Always inline rt2x00pci_enable_interruptHelmut Schaa2011-04-19
| | | | | | | | | | | | | | | | | | | | | | | This allows the compiler to perform the necessary bitfield calculations during compile time instead of run time and thus reduces the number of instructions to run during each tasklet invocation. This should improve performance in the RX hotpath. This comes at the cost of a slight increase in the module size (for example rt2800pci): Before: text data bss dec hex filename 14133 832 4 14969 3a79 drivers/net/wireless/rt2x00/rt2800pci.ko After: text data bss dec hex filename 14149 832 4 14985 3a89 drivers/net/wireless/rt2x00/rt2800pci.ko Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Decrease association time for USB devicesIvo van Doorn2011-04-19
| | | | | | | | | | | | | | | | | | | | | | | | When powersaving is enabled, assocaition times are very high (for WPA2 networks, the time can easily be around the 3 seconds). This is caused, because the flushing of the queues takes too much time. Without the flushing callback mac80211 assumes a timeout of 100ms while scanning. Limit all flush waiting loops to the same maximum. We can apply this maximum by passing the drop status to the driver, which makes sure the driver performs extra actions during the waiting for the queue to become empty. After these changes, association times fall within the healthy range of ~0.6 seconds with powersaving enabled. The difference between association time between powersaving enabled and disabled is now only ~0.1 second (which can also be due to the measuring method). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Split rt2x00dev->flagsIvo van Doorn2011-04-19
| | | | | | | | | | | | | | | | | | | | | | | | The number of flags defined for the rt2x00dev->flags field, has been growing over the years. Currently we are approaching the maximum number of bits which are available in the field. A secondary problem, is that one part of the field are initialized only during boot, because the driver requirements are initialized or device requirements are loaded from the EEPROM. In both cases, the flags are fixed and will not change during device operation. The other flags are the device state, and will change frequently. So far this resulted in the fact that for some flags, the atomic bit accessors are used, while for the others the non-atomic variants are used. By splitting the flags up into a "flags" and "cap_flags" we can put all flags which are fixed inside "cap_flags". This field can then be read non-atomically. In the "flags" field we keep the device state, which is going to be read atomically. This adds more room for more flags in the future, and sanitizes the field access methods. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Implement tx power temperature compensationHelmut Schaa2011-04-04
| | | | | | | | | | | | | | | | | rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Limit rt2800pci txdone processing to 16 entries at onceHelmut Schaa2011-04-04
| | | | | | | | | | | Instead of reporting an unlimited number of tx status reports to mac80211 stop after 16 frames and reschedule the tx status tasklet. This allows other tasklets to be run inbetween. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Limit rt2x00pci rxdone processing to 16 entries at onceHelmut Schaa2011-04-04
| | | | | | | | | | | Instead of receiving an unlimited number of frames, stop after 16 entries and reschedule the rxdone tasklet. This allows other tasklets to be run inbetween. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix comment in rt2800pciHelmut Schaa2011-03-04
| | | | | | | | We don't use interrupt threads anymore. Fix the comment. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Revise irqmask locking for PCI devicesHelmut Schaa2011-03-04
| | | | | | | | | | | The PCI device irqmask is locked by a spin_lock. Currently spin_lock_irqsave is used everywhere. To reduce the locking overhead replace spin_lock_irqsave in hard irq context with spin_lock and in soft irq context with spin_lock_irq. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Optimize TX descriptor handlingHelmut Schaa2011-03-04
| | | | | | | | | | | | | | | HT and no-HT rt2x00 devices use a partly different TX descriptor. Optimize the tx desciptor memory layout by putting the PLCP and HT substructs into a union and introduce a new driver flag to decide which TX desciptor format is used by the device. This saves us the expensive PLCP calculation fOr HT devices and the HT descriptor setup on no-HT devices. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Make use of unlikely during tx status processingHelmut Schaa2011-03-04
| | | | | | | | These conditions are unlikely to happen, tell the compiler. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Optimize calls to rt2x00queue_get_queueHelmut Schaa2011-03-04
| | | | | | | | | | | | | | | | | In some cases (tx path for example) we don't need to check for non-tx queues in rt2x00queue_get_queue. Hence, introduce a new method rt2x00queue_get_tx_queue that is only valid for tx queues and use it in places where only tx queues are valid. Furthermore, this new method is quite short and as such can be inlined to avoid the function call overhead. This only converts the txdone functions of drivers that don't use an ATIM queue and the generic tx path. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: fix whitespace damage in the rt2800 specific codeGabor Juhos2011-03-04
| | | | | | | | | | | | The rt2800 specific code contains a lots of whitespace damage caused by the commit 'rt2x00: Add support for RT5390 chip'. This patch fixes those whitespace errors. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add support for RT5390 chipRA-Shiang Tu2011-02-21
| | | | | | | | Add new RT5390 chip support Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2011-02-18
|\ | | | | | | | | | | Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
| * wireless: rt2x00: rt2800pci.c: add two idsXose Vazquez Perez2011-02-18
| | | | | | | | | | | | | | | | taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Fix WPA TKIP Michael MIC failures.Gertjan van Wingerde2011-01-31
| | | | | | | | | | | | | | | | | | | | | | As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISRHelmut Schaa2011-01-31
| | | | | | | | | | | | | | | | | | | | Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR as they are not used anymore. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Convert rt2800pci to use taskletsHelmut Schaa2011-01-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix interrupt processing on slow machines by using individual tasklets for each different device interrupt. This ensures that while a RX or TX status tasklet is scheduled only the according device interrupt is masked and other interrupts such as TBTT can still be processed. Also, this allows us to use tasklet_hi_schedule for TBTT and PRETBTT processing which is required to not send out beacons with a wrong DTIM count (due to delayed periodic beacon updates). Furthermore, this improves the latency between the TBTT and sending out buffered multi- and broadcast traffic. As a nice bonus, the interrupt handling overhead is reduced such that rt2800pci gains around 25% more throuhput on a rt3052 MIPS board. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Disable txstatus tasklet by defaultHelmut Schaa2011-01-31
| | | | | | | | | | | | | | | | | | | | | | | | Enable the txstatus tasklet when interrupts are enabled and disable it together with the interrupts. Also make the txstatus tasklet useful even without the tx status FIFO and make use of the generic rt2x00 tasklet initialization macro. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Refactor beacon code to make use of start- and stop_queueHelmut Schaa2011-01-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows to dynamically remove beaconing interfaces without shutting beaconing down on all interfaces. The only place to start and stop beaconing are now the start- and stop_queue callbacks. Hence, we can remove some register writes during interface bring up (config_intf) and only write the correct sync mode to the register there. When multiple beaconing interfaces are present we should enable beaconing as soon as mac80211 enables beaconing on at least one of them. The beacon queue gets stopped when the last beaconing interface was stopped by mac80211. Therefore, introduce another interface counter to keep track ot the number of enabled beaconing interfaces and start or stop the beacon queue accordingly. To allow single interfaces to stop beaconing, add a new driver callback clear_beacon to clear a single interface's beacon without affecting the other interfaces. Don't overload the clear_entry callback for clearing beacons as that would introduce additional overhead (check for each TX queue) into the clear_entry callback which is used on the drivers TX/RX hotpaths. Furthermore, the write beacon callback doesn't need to enable beaconing anymore but since beaconing should be disabled while a new beacon is written or cleared we still disable beacon generation and enable it afterwards again in the driver specific callbacks. However, beacon related interrupts should not be disabled/enabled here, that's solely done from the start- and stop queue callbacks. It would be nice to stop the beacon queue just before the beacon update and enable it afterwards in rt2x00queue itself instead of the current implementation that relies on the driver doing the right thing. However, since start- and stop_queue are mutex protected we cannot use them for atomic beacon updates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Fix radio off hang issue for PCIE interfaceRA-Jay Hung2011-01-19
|/ | | | | | | | | PCI/PCIE radio off behavior is different from SOC/USB. They mainly use MCU command to disable DMA, TX/RX and enter power saving mode. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: simplify txstatus_fifo handlingJohannes Stezenbach2011-01-04
| | | | | | Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix WMM Queue namingIvo van Doorn2010-12-13
| | | | | | | | | | | | | | | | | The Queue names were incorrectly copied from the legacy drivers, as a result the queue names were inversed to what was expected. This renames the queues using this mapping: QID_AC_BK -> QID_AC_VO (priority 0) QID_AC_BE -> QID_AC_VI (priority 1) QID_AC_VI -> QID_AC_BE (priority 2) QID_AC_VO -> QID_AC_BK (priority 3) Note that this was a naming problem only, which didn't affect the assignment of frames to their respective queues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Reorganize queue callback functionsIvo van Doorn2010-12-13
| | | | | | | | | | | | | | | As part of the queue refactoring, change the queue callback function names to have 3 different actions: start, kick & stop. We can now also remove the STATE_RADIO_RX_ON/STATE_RADIO_RX_OFF device_state flags, and replace the usage with using the start_queue/stop_queue callback functions. This streamlines the RX queue handling to the similar approach as all other queues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Introduce 3 queue commands in drivers (start, kick, stop).Ivo van Doorn2010-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | As part of the queue refactoring, we now introduce 3 queue commands: start, kick, stop. - Start: will enable a queue, for TX this will not mean anything, while for beacons and RX this will update the registers to enable the queue. - Kick: This will kick all pending frames to the hardware. This is needed for the TX queue to push all frames to the HW after the queue has been started - Stop: This will stop the queue in the hardware, and cancel any pending work (So this doesn't mean the queue is empty after a stop!). Move all code from the drivers into the appropriate functions, and link those calls to the old rt2x00lib callback functions (we will fix this later when we refactor the queue control inside rt2x00lib). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: trivial: add missing \n on warningsJohannes Stezenbach2010-12-13
| | | | | | Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Don't frequently reset beacon interval in AdHoc modeHelmut Schaa2010-12-13
| | | | | | | | | | | | | | | | | Commit 0204464329c17ba6d293e1899f71223599a0e582 "Check for specific changed flags when updating the erp config" changed the way in which a new beacon interval gets handled. However, due to a bug in rt2800usb and rt2800pci the beacon interval was reset during each scan, thus causing problems in AdHoc mode. Fix this by not cleaning up the beacon interval when killing the beacon queue but just prevent the device from sending out beacons. Reported-by: Wolfgang Kufner <wolfgang.kufner@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Implement get_survey callback for rt2800Helmut Schaa2010-12-13
| | | | | | | | | Implement the get_survey callback to allow user space to read statistics about the current channel condition. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211/rt2x00: add ieee80211_tx_status_ni()Johannes Stezenbach2010-11-30
| | | | | | | | | | | | | All rt2x00 drivers except rt2800pci call ieee80211_tx_status() from a workqueue, which causes "NOHZ: local_softirq_pending 08" messages. To fix it, add ieee80211_tx_status_ni() similar to ieee80211_rx_ni() which can be called from process context, and call it from rt2x00lib_txdone(). For the rt2800pci special case a driver flag is introduced. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Use ioremap for SoC devices instead of KSEG1ADDR.Gertjan van Wingerde2010-11-17
| | | | | | | | | | Make the code a bit more portable to architectures that do not support KSEG1ADDR. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove unneccessary internal Kconfig symbols.Gertjan van Wingerde2010-11-17
| | | | | | | | | | CONFIG_RT2800PCI_PCI and CONFIG_RT2800PCI_SOC are strictly not needed as we can check the dependent symbols directly in the rest of Kconfig and the code, so clean up the Kconfig namespace a bit. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove RT30XX Kconfig variables.Gertjan van Wingerde2010-11-17
| | | | | | | | | | | | | Enabling of RT30xx devices via Kconfig variables was introduced when these devices weren't properly supported yet. Now that that they are properly supported and functional, we can remove these Kconfig variables for RT30xx devices and simply enable them whenever rt2800pci and/or rt2800usb is enabled. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Add initial support for RT3370/RT3390 devices.Gertjan van Wingerde2010-11-17
| | | | | | | | | Modified from Eddy's patch by adding the RT3370 USB support as well. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Eddy Tsai <Eddy_Tsai@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove rt2x00lib_toggle_rxIvo van Doorn2010-11-15
| | | | | | | | | | | | | | | As part of the queue refactoring, the rt2x00lib_toggle_rx can be removed and replaced with the call directly to the set_device_state callback function. We can remove the STATE_RADIO_RX_ON_LINK and STATE_RADIO_RX_OFF_LINK, as it was only used for special behavior inside rt2x00lib rather then the drivers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix MCU_SLEEP argumentsIvo van Doorn2010-11-15
| | | | | | | | | | | Legacy driver uses 0xff as the second argument for the MCU_SLEEP command. It is still unknown what the values actually mean, but this will at least keep the command in-sync with the original driver. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Implement flush callbackIvo van Doorn2010-11-15
| | | | | | | | | | | | | | | Implement a basic flush callback function, which simply loops over all TX queues and waits until all frames have been transmitted and the status reports have been gathered. At this moment we don't support dropping any frames during the flush, but mac80211 will only send 'false' for this argument anyway, so this is not important at this time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Sync Tx and RX ring sizes with legacy driversHelmut Schaa2010-11-15
| | | | | | | | | | | | | | | | | All rt2x00 devices used the same Tx and Rx ring size (24 entries) till now. Newer devices (like rt2800) can however make use of a larger TX and RX ring due to 11n capabilities (AMPDUs of size 64 for example). Hence, bring rt2x00 in sync with the legacy drivers and use the same TX and RX ring sizes. Also remove the global defines RX_ENTRIES, TX_ENTRIES, BEACON_ENTRIES and ATIM_ENTRIES and use per driver values. That is 24 entries for rt2400pci, 32 entries for rt2500pci, rt2500usb, rt61pci and rt73usb and 128 (RX) and 64 (TX) for rt2800pci and rt2800usb. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix tx status handling in rt2800pciHelmut Schaa2010-10-11
| | | | | | | | | | | | | | | | | | The patches "rt2x00: Improve TX status entry validation" and "rt2x00: rework tx status handling in rt2800pci" together were causing problems with tx status processing in rt2800pci: phy1 -> rt2800pci_txdone: Warning - Got TX status for an empty queue 3, dropping phy1 -> rt2800pci_txdone: Warning - Got TX status for an unavailable queue 7, dropping Fix this by using the correct field definition for getting the QID out of the tx status report. Reported-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove superfluous initialization of qidxHelmut Schaa2010-10-11
| | | | | | | | | There is no need to initialize qidx to zero as it will ever be overwritten by the correct value. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix race between dma mapping and clearing rx entries in rt2800pciHelmut Schaa2010-10-05
| | | | | | | | | | | | | | | | | During rx, rt2x00lib calls rt2800pci_fill_rxdone to read the RX descriptor. At that time the skb is already dma unmapped but no new skb was dma mapped for this entry again. However, rt2800pci_fill_rxdone also moves the hw rx queue index, marking this entry to be available for reuse. Since no new skb was dma mapped and also the previous skb was unmapped this might lead to strange hw behavior. To fix this issue move the hw rx queue index increment to rt2800pci_clear_entry where a new skb was already dma mapped and can be safely used by the hw. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: rework tx status handling in rt2800pciHelmut Schaa2010-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the way tx status reports are handled by rt2800pci. Previously rt2800pci would sometimes lose tx status reports as the TX_STA_FIFO register is a fifo of 16 entries that can overflow in case we don't read it often/fast enough. Since interrupts are disabled in the device during the execution of the interrupt thread it happend sometimes under high network and CPU load that processing took too long and a few tx status reports were dropped by the hw. To fix this issue the TX_STA_FIFO register is read directly in the interrupt handler and stored in a kfifo which is large enough to hold all status reports of all used tx queues. To process the status reports a new tasklet txstatus_tasklet is used. Using the already used interrupt thread is not possible since we don't want to disable the TX_FIFO_STATUS interrupt while processing them and it is not possible to schedule the interrupt thread multiple times for execution. A tasklet instead can be scheduled multiple times which allows to leave the TX_FIFO_STATUS interrupt enabled while a previously scheduled tasklet is still executing. In short: All other interrupts are handled in the interrupt thread as before. Only the TX_FIFO_STATUS interrupt is partly handled in the interrupt handler and finished in the according tasklet. One drawback of this patch is that it duplicates some code from rt2800lib. However, that can be cleaned up in the future once the rt2800usb and rt2800pci tx status handling converge more. Using this patch on a Ralink RT3052 embedded board gives me a reliable wireless connection even under high CPU and network load. I've transferred several gigabytes without any queue lockups. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Mask out unused interrupts in rt2800pciHelmut Schaa2010-09-14
| | | | | | | | | We don't use all available interrupts in rt2800pci. Mask out all unused interrupts to avoid waking up without having anything to do. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Wakeup hardware before loading firmwareIvo van Doorn2010-08-31
| | | | | | | | | | | | | According to the legacy drivers the AUTOWAKEUP_CFG register must be reset to 0 before loading the firmware. Instead of during rt2800{pci,usb}_write_firmware it must actually be done in rt2800_load_firmware() before resetting the WPDMA_GLO_CFG and PWR_PIN_CFG registers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Merge rt2800{pci/usb} radio enabling/disabling code to rt2800libIvo van Doorn2010-08-25
| | | | | | | | | | | | | | The functions rt2800pci_enable_radio and rt2800usb_disable_radio are almost equal and can be merged into rt2800lib. This reduces the number of functions which must be exported from rt2800lib to the drivers at the same time. Also rt2800pci_disable_radio and rt2800usb_disable_radio are almost equal and can be merged into rt2800lib in a similar fashion. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Move direct access to queue->entries to rt2x00queue.cIvo van Doorn2010-08-25
| | | | | | | | | | | | | | | | | | | All access to queue->entries through the Q_INDEX/Q_INDEX_DONE variables must be done using spinlock protection. It is best to manage this completely from rt2x00queue.c. For safely looping through all entries in the queue, the function rt2x00queue_for_each_entry is added which will walk from from a index range in a safe manner. This also fixes rt2x00usb which walked the entries list from 0 to length to kill each entry (killing entries must be done from Q_INDEX_DONE to Q_INDEX to enforce TX status reporting to occur in the correct order. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Simplify arguments to rt2x00 driver callback functionsIvo van Doorn2010-08-25
| | | | | | | | | | | | | | | | | | write_tx_desc shouldn't pass a rt2x00dev and skb pointer, instead it should use the same format as other TX frame callback functions, which is passing the data_entry pointer which contains all the information which is needed to work on a TX frame. Most callers of the kick_tx_queue and kill_tx_queue already have the data_queue pointer, so rather then sending the QID with the given function, when the driver requests a new pointer to the data_queue, it is more efficient to just send the data_queue pointer directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 12:18:37 -0500