aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex/fw.h
Commit message (Collapse)AuthorAge
* mwifiex: channel switch handling for stationAmitkumar Karwar2013-06-19
| | | | | | | | | | | | After receiving channel switch announcement from AP, scan and association on that channel is blocked for DFS_CHAN_MOVE_TIME (10 seconds). Hence station will be able to connect to the AP, once it is moved to new channel. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add basic 11h support for stationAmitkumar Karwar2013-06-19
| | | | | | | | | | | | | | This patch adds code to parse requested AP's 11h capabilities and add 11h information in association request. Also, deauth is sent to the AP after receiving channel switch announcement event from firmware. This happens when AP advertises WLAN_EID_CHANNEL_SWITCH IE in it's beacon. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add calibration data download featureAmitkumar Karwar2013-05-22
| | | | | | | | | | | User can provide a text file containing calibration data in hex format while loading mwifiex module. It will be downloaded to firmware. eg. insmod mwifiex.ko cal_data_cfg=cal_data.conf Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add del_station handlerAvinash Patil2013-05-22
| | | | | | | | | | | | | | | This patch adds cfg80211 del_station handler for mwifiex. If bss is not started or there are no stations in associated stations list, no action is taken. If argument received is null/broadcast mac, all stations in associated station list are deauthenticated. Patch also deletes related RxReorder stream and TxBA stream tables for related station. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add support to configure VHT for AP modeYogesh Ashok Powar2013-03-25
| | | | | | | | | | | | | | Currently, default VHT configuration from the firmware is used for the VHT operations. Adding vhtcfg command to configure the firmware based on input received from cfg. Enable VHT for AP mode only when cfg80211_ap_settings has a VHT IE i.e., when ieee80211ac is set to 1 in the hostapd.conf. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: cleanup VHT capYogesh Ashok Powar2013-03-18
| | | | | | | | | | | Firmware returned VHT cap has the same format that cfg80211 expects. There is no need to parse the vht cap from the firmware and then set it to ieee80211_sta_vht_cap. Just copying is sufficient. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add WOWLAN supportAmitkumar Karwar2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently 'magic-packet' and 'patterns' options in 'iw wowlan' command are supported. Appropriate packet filters for wowlan are configured in firmware based on provided patterns and/or magic-packet option. For examples, wake-on ARP request for 192.168.0.100: iw phy0 wowlan enable patterns ff:ff:ff:ff:ff:ff 20+08:06 46+c0:a8:00:64 wake-on RX packets sent from IP address 192.168.0.88: iw phy0 wowlan enable patterns 34+c0:a8:00:58 wake-on RX packets with TCP destination port 80 iw phy0 wowlan enable patterns 44+50 wake-on MagicPacket: iw phy0 wowlan enable magic-packet wake-on MagicPacket or patterns: iw phy0 wowlan enable magic-packet patterns 12+00:11:22:33:44:55 18+00:50:43:21 wake-on IPv4 multicast packets: iw phy0 wowlan enable patterns 01:00:5e wake-on IPv6 multicast packets: iw phy0 wowlan enable patterns 33:33 disable all wowlan options iw phy0 wowlan disable Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add "ethtool wol" command supportAmitkumar Karwar2013-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | Host sleep wakeup condition is configured using this command. Supports Wake-on: pumb For examples: wake-on any unicast packets: ethtool -s mlan0 wol u wake-on multicast/broadcast packet: ethtool -s mlan0 wol mb wake-on unicast packets and MAC events: ethtool -s mlan0 wol pu wake-on unicast/multicast/broadcast packets and MAC events: ethtool -s mlan0 wol pmbu disable all wake-on options: ethtool -s mlan0 wol d Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: shorten the host sleep configuration macro namesAmitkumar Karwar2013-03-06
| | | | | | | | | As we are adding a few more macros in this category in next patch, this cleanup work is required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add 802.11AC supportYogesh Ashok Powar2013-02-18
| | | | | | | | | | | | | | | | | | | | For STA mode, collect VHT realated IEs from the Beacons or Probe Responses and append similar VHT related IEs to association requests. For AP mode, get VHT related capability information and share it with cfg80211 at the time of wiphy register. This information is further used by cfg80211 and hostapd to start an AP with 802.11AC support. Currently only 8897 supports 802.11AC. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: correction in status codes used for association failureAmitkumar Karwar2013-01-22
| | | | | | | | | | | | When AP responds with appropriate status code, we forward that code correctly to cfg80211. But sometimes when there is no response from AP, our firmware uses proprietary status codes. We will map authentication timeout to WLAN_STATUS_AUTH_TIMEOUT and other proprietary codes to WLAN_STATUS_UNSPECIFIED_FAILURE. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: parse WMM IEs from hostapd for mwifiex APAvinash Patil2013-01-07
| | | | | | | | | | | This patch adds support for parsing WMM IEs from hostapd and setting them to FW via sys configure command. Patch also sets wiphy flag to advertise AP uAPSD support. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: advertise GreenField, 40MHz intolerance support to cfg80211Avinash Patil2012-11-30
| | | | | | | | | This patch adds support for advertising GreenField, 40MHz intolerance or LDPC coding support to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add inactivity deauth support for apKevin Gan2012-09-28
| | | | | | | | | | | | | The firmware has support for this feature, so we offload it to firmware. In start_ap, driver passes the inactivity timeout value to firmware via TLVs and firmware will report STA_DEAUTH event to driver when inactivity timer is fired. Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add support for P2P GO in interface type changeStone Piao2012-09-28
| | | | | | | | | | | When cfg80211 calls to change interface type for P2P GO, send P2P mode config commands to firmware and set bss role and bss mode accordingly. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add support for P2P client in interface type changeStone Piao2012-09-28
| | | | | | | | | When cfg80211 calls to change interface type for P2P client, send P2P mode config commands to firmware. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: process remain on channel expired eventStone Piao2012-09-28
| | | | | | | | | Process remain on channel expired event, and notify cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: implement remain_on_channel and cancel_remain_on_channelStone Piao2012-09-28
| | | | | | | | | | Add a new command to implement remain_on_channel and cancel_remain_on_channel. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: report received management frames to cfg80211Stone Piao2012-09-28
| | | | | | | | | | | Process the management frames received from firmware and report them to cfg80211. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Kevin Gan <ganhy@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: implement cfg80211 mgmt_frame_register handlerStone Piao2012-09-28
| | | | | | | | | Add a new command to implement mgmt_frame_register. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: disable WOW by defaultBing Zhao2012-09-11
| | | | | | | | Some platforms do not support WOW. Let's change the default wakeup criteria to 0. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: parse rate info for APAvinash Patil2012-09-07
| | | | | | | | | | | This patch adds support for parsing rates from cfg80211_ap_settings of start_ap handler. This in turn adds support for 11a and 11b phy configurations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add AES_CMAC support in key_material cmdYing Luo2012-08-06
| | | | | | | | | | The sequence counter will be sent to firmware via key_material command. Signed-off-by: Ying Luo <luoy@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: improve uAP RX handlingAvinash Patil2012-08-06
| | | | | | | | | | | | | | | 1. Separate file for uAP RX handling. 2. If received packet is broadcast/multicast, send it to kernel as well as requeue it back to uAP TX queue. 3. If received packet is for associated STA (intra-BSS), requeue it back to uAP TX queue. 4. In all other cases (packets for AP or inter-BSS packets), pass packet to kernel to handle it accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: do le_to_cpu conversion for Rx packet header elementsAmitkumar Karwar2012-08-06
| | | | | | | | | | | | We do similar conversion for Tx packet header but it was missing for Rx packet header. Without this fix, Rx packet header won't be correctly parsed on big endian platform. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove redundant code in set channel pathAmitkumar Karwar2012-07-17
| | | | | | | | | | | | | | | | | | | 1) Recently we removed set_channel cfg80211 handler. Also, cfg80211 blocks ibss connection requests if ibss network is already started /joined. Hence the code to restart ibss network in new channel (mwifiex_drv_change_adhoc_chan() function) becomes redundant. 2) mwifiex_bss_set_channel() function is redundant. It does some error checking and calculate adhoc start band and adhoc channel. Cfg80211 already takes care of error checking and provides correct channel information to the driver. Adhoc start band is already calculated in mwifiex_set_rf_channel() function. Other associated code is also removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add set_antenna handler supportAmitkumar Karwar2012-07-09
| | | | | | | | | | This enables user to set mode of Tx/Rx path using "iw set antenna" command. For non MIMO chips, the command will be used for selecting specific antenna or configuring antenna diversity mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: use correct firmware command to get power limitsAmitkumar Karwar2012-06-28
| | | | | | | | | | "priv->max_tx_power_level" and "priv->min_tx_power_level" variables are initialized to maximum and minimum power levels supported by hardware by sending correct firmware command. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: support for WEP in AP modeAvinash Patil2012-06-20
| | | | | | | | This patch adds support for WEP open/shared encryption in AP mode. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: set HT capability based on cfg80211_ap_settingsAvinash Patil2012-06-20
| | | | | | | | | | Parse HT IE from cfg80211 and set HT capabilities accordingly to FW. If HT IE is missing, 11n would be disabled in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAPAvinash Patil2012-06-05
| | | | | | | | | | mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: retrieve IEs from cfg80211_beacon_data and send to firmwareAvinash Patil2012-05-16
| | | | | | | | | | | | | This patch adds logic for setting tail beacon IE, probe response IE and assoc response IE from cfg80211_ap_settings parameter of start_ap handler into FW. RSN IE is also retrieved from tail IE buffer and sent to firmware. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add custom IE frameworkAvinash Patil2012-05-16
| | | | | | | | | | | | | 1. support for setting custom IE from application hostapd etc. Custom IE addition using auto-indexing and Custom IE deletion using static indices (which are allocated during IE addition and stored in driver) are supported. 2. Separate file for handling IE related execution. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: rearrange AP sys configure codeAvinash Patil2012-05-16
| | | | | | | | | | | This patch takes into account AP config_type (bss config/custom ie config) while preparing AP sys_configure command buffer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add WPA2 support for APAvinash Patil2012-05-16
| | | | | | | | | | | | | | 1. Support for parsing security related parameters from cfg80211_ap_settings in start_ap cfg80211 handler 2. Conversion of these security information into FW understandle TLVs and setting into FW thru sys_config command 3. key management is done on host. This ensures that FW forwards EAPOL key packets to host instead of processing on its own. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add AP event handling frameworkAvinash Patil2012-05-16
| | | | | | | | | | | | | | Added logic to handle AP event that are generated by the firmware. As MLME/SME is implemented in the firmware, events such as station association and deauthentication, must be sent to userspace (hostapd) for creating and deleting station database. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add cfg80211 start_ap and stop_ap handlersAvinash Patil2012-05-16
| | | | | | | | | | | | 1. add start AP and stop AP handlers 2. support for parsing ssid, beacon period, DTIM period from beacon_parameters structure and setting it to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: common set_wiphy_params cfg80211 handler for AP and STA interfaceAvinash Patil2012-05-16
| | | | | | | | | | | | | | Add support for setting fragmentation threshold, RTS threshold and retry limit. Since wiphy parameters are properties of physical device, appropriate function to set phy parameters is invoked depending upon bss_type(STA or AP) for each virtual interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add AP command sys_config and set channelAvinash Patil2012-05-16
| | | | | | | | | | | | 1. support for AP sys_config command and added parsing of channel information. 2. support for setting AP channel from cfg80211 set_channel handler Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add bss start and bss stop commands for APAvinash Patil2012-05-16
| | | | | | | | | | | | 1. separate file for preparing uAP command buffer 2. definition of bss_start and bss_stop commands being sent to firmware Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: append peer mac address TLV in key material command to firmwareAvinash Patil2012-05-16
| | | | | | | | | | | | | Modify key related cfg80211 handlers to copy peer mac address for pairwise keys. If peer mac address is not present or group keys, it will be sent as broadcast mac address. This would be required since hostapd downloads per peer PTK. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix static checker warningsAmitkumar Karwar2012-05-08
| | | | | | | | | | | | | | | | | | | | | | "oui_type" in structure "ieee_types_vendor_header" is not used separately, so include it in "oui" array. Now complete oui will be compared fixing following warnings. drivers/net/wireless/mwifiex/sta_ioctl.c:1410 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/sta_ioctl.c:1435 mwifiex_set_gen_ie_helper() error: memcmp() 'pvendor_ie->oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1177 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) drivers/net/wireless/mwifiex/scan.c:1185 mwifiex_update_bss_desc_with_ie() error: memcmp() 'vendor_ie->vend_hdr.oui' too small (3 vs 4) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add support for Marvell USB8797 chipsetAmitkumar Karwar2012-04-23
| | | | | | | | | | | | | This patch supports Avastar 88W8797 chipset with USB interface. The corresponding firmware image file is located at: "mrvl/usb8797_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: corrections in timestamp related codeAmitkumar Karwar2012-04-17
| | | | | | | | | | | | | | | | | | | | | | | | We get two timing related fields for each bss from firmware in scan results. 1) timestamp - Actual timestamp information in probe response/beacon 2) network_tsf - firmware's TSF value at the time the beacon or probe response was received. Both are needed while associating by firmware. The patch takes care of following things. 1) We should pass "timestamp" to cfg80211_inform_bss(), but currently "network_tsf" is being provided. This error is corrected here. 2) Rename "network_tsf" to "fw_tsf" 3) Make use of u64 variable instead of an array of u8/u32 to save parsed "timestamp" information. 4) Use timestamp provided to stack in scan results using cfg80211_inform_bss() while associating. (bss->tsf) 5) Allocate space to save fw_tsf in "priv" of cfg80211_bss and retrieve it while associating. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add support for WPS2.0Avinash Patil2012-04-12
| | | | | | | | | | | | | This patches enables setting association request and probe request IE for station interface. WPS exchange between WPS2.0 AP and mwifiex STA Enrollee/External Registrar completes successfully. Tested with wpa_supplicant 1.0 and 2.0 devel. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: don't use IEEE80211_MAX_QUEUESJohannes Berg2012-04-10
| | | | | | | | | | | | | | | | | IEEE80211_MAX_QUEUES is an internal mac80211 value, it is not guaranteed to be always 4. The firmware API in mwifiex almost certainly doesn't care about mac80211 changing though, so mwifiex shouldn't use this value. Maybe it should use IEEE80211_NUM_ACS instead and that is what I'm doing here as at least that value will probably never change, but maybe it should have its own define instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add set_cqm_rssi_config handler supportAmitkumar Karwar2012-04-09
| | | | | | | | | | | | | | In this handler LOW_RSSI and HIGH_RSSI events are subscribed to FW using provided threshold value so that FW will monitor connection quality and trigger any of these events. Driver will notify cfg80211 about connection quality based on inputs from FW and provided hysteresis. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: rename ht_info to ht_operationJohannes Berg2012-04-09
| | | | | | | | | | | | | | | Since some of the HT code pre-dates 802.11n-2009 some names are wrong. The one that bothers me most is that "HT operation" is called "HT information" in our code and that causes confusion. Rename "HT information" to "HT operation" and also the control_chan field to primary_chan to match the name used in the spec. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix checkpatch --strict warnings/errors Part 3Yogesh Ashok Powar2012-03-14
| | | | | | | | For files fw.h, init.c and join.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix bug in wildcard scan handlingAmitkumar Karwar2012-03-05
| | | | | | | | | | | | | | | | | Currently if valid SSID list is provided in scan request, driver performs specific SSID scan otherwise wildcard scan is chosen. When wpa_supplicant provides valid SSID list followed by zero-length SSID for wildcard scan, only specific SSID scan is performed by driver. Actually driver is expected to do both type of scanning in this case. The patch fixes this issue. Also, use SSID list pointer provided by stack directly, instead of copying SSID's to local structure. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-21 16:00:08 -0400