aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex/fw.h
Commit message (Collapse)AuthorAge
* mwifiex: add SDIO rx single port aggregationZhaoyang Liu2015-03-16
| | | | | | | | | | | | | | | | | | | | | | | This patch brings in support for SDIO single port rx aggregation to mwifiex. Maximum read size support by SDIO cmd53 is 64K. Based on multi port aggregation which is already part of mwifiex, idea here is multiple packets received in FW can be aggregated into single buffer. A separate upload type is defined for such packet aggregated to single port. Packets from this single buffer are later deaggregated into individual packets. This way, driver can receive more packets each time through single SDIO cmd53; thereby reducing no of times MMC bus is accessed. SDIO SP aggregation support is advertised by FW during load time and driver would get FW block size in command response of HostCmd_CMD_SDIO_SP_RX_AGGR_CFG. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: Add support for auto ARP in mwifiex.Maithili Hinge2015-03-16
| | | | | | | | | | | This patch adds support for auto ARP feature in mwifiex. The device will respond to ARP requests from the network with ARP response in suspended state without waking up the host. This feature is enabled in the driver by default. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: 11h handling for AP interfaceAvinash Patil2015-01-29
| | | | | | | | | | | | This patch enables 11h extensions in FW upon detecting DFS channel in start radar detection/channel switch handlers. Patch also takes care of disabling 11h when non DFS channels are to be set during start_ap handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: handle radar detect event from FWAvinash Patil2015-01-29
| | | | | | | | | | | This patch adds support for radar_detected event from FW. Driver in turn would stop netdev queues to stop TX traffic and issue RADAR_DETECT event to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: support for channel report for radar detectionAvinash Patil2015-01-29
| | | | | | | | | | | | | This patch adds support for channel report enabling. Channel report event happens if radar is detected on specified channel after driver has issued radar detect command within CAC time. Driver in turn sends RADAR_DETECTED event to cfg80211 to tell radar was detected within CAC time. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: add cfg80211 start_radar_detection handlerAvinash Patil2015-01-29
| | | | | | | | | | | | | | This patch adds support for cfg80211 start_radar_detection handler. Upon reception of start_radar_detection, driver prepares radar detect command to FW. Delayed work is queued for CAC time which sends radar detection finished event to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: get supported BA stream info from FWAvinash Patil2015-01-06
| | | | | | | | | | This patch adds support to get number of BA streams supported information from FW. Some newer chips(e.g. 8897 series) support 4 BA streams for TX; so driver should not disallow BA stream setup just after 2 streams have been established. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: add bcn_rcv_cnt and bcn_miss_cnt in getlog debugfsXinming Hu2015-01-06
| | | | | | | | | | This patch add receive beacon count and miss beacon count statistics in debugfs getlog item. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mwifiex: add Tx status support for EAPOL packetsAmitkumar Karwar2014-11-25
| | | | | | | | | | | Firmware notifies the driver through event if EAPOL data packet has been acked or not. We will inform this status to userspace listening on a socket. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: update rx packet descriptor structure to match FWAvinash Patil2014-11-17
| | | | | | | | | RX packet descriptor structure has recently changed in FW. This patch updates rxpd accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: channel statistics support for mwifiexAvinash Patil2014-10-31
| | | | | | | | | | | | This patch adds support to record channel statistics during scan. With extended scan, scan results are returned as events from FW while channel statistics are part of scan command response. We store these channel statistics in adapter. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Xinmin Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: bring in scan channel gap featureAvinash Patil2014-09-15
| | | | | | | | | | | | | | | | | | With scan channel gap when any station/AP is active, FW comes back to connected channel for any pending data transfter after scanning each channel. We set scan channel gap TLV to FW in scan command when any of the interface is active. This enables scan channel gap in FW. Also when scan channel gap is enabled, we would scan maximum channels allowed by FW. Scan channel gap is supported only on FW with V15 FW API. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: use firmware API revision from GET_HW_SPEC responseAmitkumar Karwar2014-08-28
| | | | | | | | | | | Newer firmware returns API revision in GET_HW_SPEC command response. We will make use of it instead of parsing this information from FW release number. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: rename macro and variables related to API revisionAmitkumar Karwar2014-08-28
| | | | | | | | | | We will remove 'fw' prefix from these variable and macro names and make them generic. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: define TDLS idle timeout macro with unitsBing Zhao2014-07-15
| | | | | | | | | The unit of this timeout is in seconds. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: update Copyright to 2014Xinming Hu2014-06-25
| | | | | | | | This patch updates mwifiex Copyright to 2014. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: change hscfg gap parameter to avoid potential firmware deadlockBing Zhao2014-05-29
| | | | | | | | | | If host sleep parameter gap is set to 0xff, firmware will wait for an ack from host to confirm the success of host wakeup. This prevents firmware from uploading data packet before host actually wakes up. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: update seq number correctly for packets from TDLS peerAvinash Patil2014-05-22
| | | | | | | | | | | | This patch adds handling of updating rx sequence number for packets received from TDLS peer. Current implementation of mwifiex_queueing_ra_based assumes station would always receive packets from AP which is not true in case of TDLS. Fix this by adding this case. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add HT operation IE in TDLS setup confirmAvinash Patil2014-05-07
| | | | | | | | | | This patch adds support to populate HT operatation IE in TDLS setup confirm command. This is required for setting wider bandwidths for TDLS operations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: disable TDLS link upon tear down eventAvinash Patil2014-05-07
| | | | | | | | | | | | This patch adds code to disable TDLS link upon reception of TDLS teardown event from peer. Teardown event can happen either because of TDLS teardown packet from peer or internal timeout configured during TDLS setup. Event is propogated to cfg80211 so that userspace application can take appropriate action. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: configure inactivity timeout for TDLS linkAvinash Patil2014-05-07
| | | | | | | | | | This patch adds configuration timeout for TDLS link. This is configuered at the time of TDLS link configuration. If TDLS link is inactive for more than timeout, FW will tear this link. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: update MCS set as per RX-STBC bit from hostapdMaithili Hinge2014-03-19
| | | | | | | | | | | To set AP in 1X1 or 2X2 mode through hostapd, we need to set RX-STBC* in hostapd.conf file. Depending upon RX-STBC bit in ht_cap IE received from hostapd, we need to update mcs set in bss_cfg appropriately before starting AP. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add VHT MCS rate configuration supportAmitkumar Karwar2014-03-14
| | | | | | | | | During Tx rate configuration, newer firmware V15 expects bitmap for VHT MCS rates as well. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: extract firmware API version numberAmitkumar Karwar2014-03-14
| | | | | | | | | The firmware API version number will be used for future patches to support different firmware API specs. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: update MCS information as per antenna settingsAmitkumar Karwar2014-02-28
| | | | | | | | | | | | | Even if the device is changed to 1X1 mode, data is sent with higher MCS rates after association. This patch fixes the problem by updating MCS information field in HT capability when antenna setting changes so that correct information will be advertised in association and probe request. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add key material v2 supportAvinash Patil2014-02-12
| | | | | | | | | | This patch adds key material V2 support to mwifiex. Newer FW supports this feature and FW KEY API version is used to determine which command structure needs to be used. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: parse API version from FWAvinash Patil2014-02-12
| | | | | | | | | This patch adds support to parse FW API version TLVs. Currently only API version for key_material is supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add VHT support for TDLSAvinash Patil2014-02-12
| | | | | | | | | | | | | | | During TDLS setup request/response, if HW is 11ac capable, we add VHT Capability IEs in outgoing data frame. Also while processing received setup request/response, we preserve peer's 11ac capability retrieved from IEs. Patch also gets VHT parameters from config_station handlers and sets it to FW using TDLS config command. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add cfg80211 change_station handler supportAvinash Patil2014-02-12
| | | | | | | | | | This patch adds cfg80211 change_station handler support for mwifiex which is needed for TDLS link setup. Driver creates a command to modify peer link capabilities and issues command to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add cfg80211 tdls_oper handler supportAvinash Patil2014-02-12
| | | | | | | | | | | | This patch adds cfg80211 handler tdls_oper handler support to mwifiex. Upon enable link, driver sets status as TDLS status as setup complete and also sets AMSDU size, AMPDU params for direct link. Upon disable link, driver issues command to FW to delete this link in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add tdls_mgmt handler supportAvinash Patil2014-02-12
| | | | | | | | | | | | This patch adds support for TDLS management frames transmit handler. mwifiex driver supports TDLS with external support, i.e. expects user space application to form TDLS frames. Same is advertised to cfg80211 during registration. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: advertise correct beamforming information for VHTAmitkumar Karwar2014-02-12
| | | | | | | | | | | | Currently MU/SU beamformer and MU beamformee features are not supported. Hence this patch modifies VHT capability information accordingly. Number of sounding dimensions should be zero in this case. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: update beamforming capability field for HTAmitkumar Karwar2014-02-12
| | | | | | | | | This patch makes sure that beamforming capability field in ht capability info gets filled if hardware supports the feature. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: implement extended scan featureAmitkumar Karwar2014-02-12
| | | | | | | | | | | | | | In extended scan, host gets scan results through one or multiple events instead of scan command response. Host will send next scan command when all the events are received. Legacy scan sometimes truncates scan results in a noisy environment due to buffer length limitation. This issue is addressed in extended scan. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: change beacon parameter structureAmitkumar Karwar2014-02-12
| | | | | | | | | | | | | | 'mwifiex_bcn_param' structure contains five parameters which are present in beacon buffer in case of legacy scan. 'rssi' field won't be there in this buffer for extended scan. Hence 'bssid' and 'rssi' are removed from the structure and it is renamed as 'mwifiex_fixed_bcn_param' so that we can have common parsing logic later for both. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove unsupported code in 11acBing Zhao2014-02-12
| | | | | | | | bit12 in fw_cap_info is for testing only. Remove all related code. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: make use of IEEE80211_VHT_MCS_NOT_SUPPORTEDBing Zhao2014-02-12
| | | | | | | Remove driver's macro and use ieee80211's definition instead Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix wrong 11ac bits setting in fw_cap_infoBing Zhao2014-01-16
| | | | | | | | | bit 14 is actually reserved and bit 12 & 13 should be used for 11ac capability in fw_cap_info. Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove cfg_data constructionBing Zhao2013-12-18
| | | | | | | | | The cfg_data buffer will include the cfg_data structure header (action, type, data_len). This makes it work for all data types without extra parsing. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: declare snap_type as __be16 variableAmitkumar Karwar2013-12-09
| | | | | | | | | | Actually we are updating snap_type with h_proto (__be16 variable) in ethernet frame header. Hence endianness conversion is not required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: use little-endian variables in firmware structuresUjjal Roy2013-12-09
| | | | | | | | | The firmware expects the command structure members in little endianness. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: replace u16 with __le16 in struct mwifiex_types_power_groupAmitkumar Karwar2013-11-11
| | | | | | | | | | | | __le16 to u16 conversion is missing for "pg_tlv_hdr->length" in mwifiex_get_power_level(). This creates a problem on big endian machines. It is resolved by changing definition of the structure and making required endianness changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix ext_capab IE structure definitionAvinash Patil2013-08-26
| | | | | | | | | | EXT_CAPAB_IE format involves IEEE header followed by bytestream of capabilities. Current structure has incorrect member u8 for data; fix it by defining it as u8[0]. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add packet coalesce supportAmitkumar Karwar2013-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Coalesce filters are configured in firmware based on settings received from cfg80211. Packet type which is required by firmware is determined based on provided patterns in a rule: Unicast: if pattern '01' with offset 0 is found Multicast: if pattern '33:33' or '01:00:5e' with offset 0 is found Broadcast: if pattern 'ff:ff:ff:ff' with offset 0 is found Some example coalesce configuration files: 1) Coalesce Rx data packets from 192.168.0.88 mac address of our device is 00:50:43:21:53:7A Source IP address offset comes out as 52 after following calculations: 32 bytes of HW 802.11 header + 8 bytes LLC + 12 bytes in IPV4 header till source IP address Destination mac is at offset 6 in HW header. delay=100 condition=1 patterns=01,6+00:50:43:22,10+53:7A,52+c0:a8:00:58 2) Coalesce all broadcast and multicast packets(Multiple packet types are not allowed in a single rule. Hence created separate rules) delay=400 condition=1 patterns=33:33 delay=400 condition=1 patterns=ff:ff:ff:ff Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: increase max supported pattern offsetAmitkumar Karwar2013-08-09
| | | | | | | | | The offset number is increased to accomodate requests from user to match more fields in a Rx packet. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove duplicate structure host_cmd_tlvAmitkumar Karwar2013-07-24
| | | | | | | | | We already have 'struct mwifiex_ie_types_header' with same definition. Hence host_cmd_tlv is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: reduce firmware poll retriesAmitkumar Karwar2013-07-24
| | | | | | | | | | | | | | After downloading the firmware, firmware status is checked by reading a register. Polling interval is 100 msecs. Therefore 100 retries means the status is checked for 10 secs which is more than sufficient for firmware to get ready. This patch removes 1000 retries macro usage, because 100secs time is not practical. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: channel switch handling for stationAmitkumar Karwar2013-06-19
| | | | | | | | | | | | After receiving channel switch announcement from AP, scan and association on that channel is blocked for DFS_CHAN_MOVE_TIME (10 seconds). Hence station will be able to connect to the AP, once it is moved to new channel. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add basic 11h support for stationAmitkumar Karwar2013-06-19
| | | | | | | | | | | | | | This patch adds code to parse requested AP's 11h capabilities and add 11h information in association request. Also, deauth is sent to the AP after receiving channel switch announcement event from firmware. This happens when AP advertises WLAN_EID_CHANNEL_SWITCH IE in it's beacon. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: add calibration data download featureAmitkumar Karwar2013-05-22
| | | | | | | | | | | User can provide a text file containing calibration data in hex format while loading mwifiex module. It will be downloaded to firmware. eg. insmod mwifiex.ko cal_data_cfg=cal_data.conf Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 12:47:14 -0500