aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
Commit message (Collapse)AuthorAge
* Merge branch 'master' of ↵David S. Miller2010-01-13
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * ath5k: Fix eeprom checksum check for custom sized eepromsLuis R. Rodriguez2010-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5 enabled EEPROM checksum checks to avoid bogus bug reports but failed to address updating the code to consider devices with custom EEPROM sizes. Devices with custom sized EEPROMs have the upper limit size stuffed in the EEPROM. Use this as the upper limit instead of the static default size. In case of a checksum error also provide back the max size and whether or not this was the default size or a custom one. If the EEPROM is busted we add a failsafe check to ensure we don't loop forever or try to read bogus areas of hardware. This closes bug 14874 http://bugzilla.kernel.org/show_bug.cgi?id=14874 Cc: stable@kernel.org Cc: David Quan <david.quan@atheros.com> Cc: Stephen Beahm <stephenbeahm@comcast.net> Reported-by: Joshua Covington <joshuacov@googlemail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix ito64Ming Lei2010-01-04
| | | | | | | | | | | | | | The unit of sizeof() is byte instead of bit, so fix it. The patch can fix debug output of some dma_addr_t variables. Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix Kconfig depends for ATH9K_DEBUGFSDominik Geyer2010-01-04
| | | | | | | | | | | | | | Add missing DEBUG_FS dependency for ATH9K_DEBUGFS in ath9k's Kconfig. Signed-off-by: Dominik D. Geyer <dominik.geyer@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵David S. Miller2009-12-29
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * ath9k: fix missed error codes in the tx status checkFelix Fietkau2009-12-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My previous change added in: commit 815833e7ecf0b9a017315cae6aef4d7cd9517681 ath9k: fix tx status reporting was not checking all possible tx error conditions. This could possibly lead to throughput issues due to slow rate control adaption or missed retransmissions of failed A-MPDU frames. This patch adds a mask for all possible error conditions and uses it in the xmit ok check. Cc: stable@kernel.org Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: wake hardware during AMPDU TX actionsLuis R. Rodriguez2009-12-28
| | | | | | | | | | | | | | | | | | | | | | | | AMDPDU actions poke hardware for TX operation, as such we want to turn hardware on for these actions. AMDPU RX operations do not require hardware on as nothing is done in hardware for those actions. Without this we cannot guarantee hardware has been programmed correctly for each AMPDU TX action. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: wake hardware for interface IBSS/AP/Mesh removalLuis R. Rodriguez2009-12-28
| | | | | | | | | | | | | | | | | | | | | | When we remove a IBSS/AP/Mesh interface we stop DMA but to do this we should ensure hardware is on. Awaken the device prior to these calls. This should ensure DMA is stopped upon suspend and plain device removal. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix suspend by waking device prior to stopSujith2009-12-28
| | | | | | | | | | | | | | | | | | | | | | | | Ensure the device is awake prior to trying to tell hardware to stop it. Impact of not doing this is we can likely leave the device in an undefined state likely causing issues with suspend and resume. This patch ensures harware is where it should be prior to suspend. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Storage class should be before const qualifierTobias Klauser2009-12-28
| | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wireless: remove remaining qual codeJohannes Berg2009-12-28
| | | | | | | | | | | | | | | | This removes the remaining users of the rx status 'qual' field and the field itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: fix SWI calibration interrupt stormBob Copeland2009-12-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The calibration period is now invoked by triggering a software interrupt from within the ISR by ath5k_hw_calibration_poll() instead of via a timer. However, the calibration interval isn't initialized before interrupts are enabled, so we can have a situation where an interrupt occurs before the interval is assigned, so the interval is actually negative. As a result, the ISR will arm a software interrupt to schedule the tasklet, and then rearm it when the SWI is processed, and so on, leading to a softlockup at modprobe time. Move the initialization order around so the calibration interval is set before interrupts are active. Another possible fix is to schedule the tasklet directly from the poll routine, but I think there are additional plans for the SWI. Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵David S. Miller2009-12-21
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * ath9k: Stop ANI when doing a resetSujith2009-12-21
| | | | | | | | | | | | | | | | | | | | | | The MIB counters are disabled when doing a chip reset. Since ANI depends on the MIB registers for its operation, relying on the contents of said registers during HW reset results in sub-optimal performance. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix TX queue drainingSujith2009-12-21
| | | | | | | | | | | | | | | | | | | | When TX DMA termination has failed, the HW has to be reset completely. Doing a fast channel change in this case is insufficient. Also, change the debug level of a couple of messages to FATAL. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix bug in assigning sequence numberSujith2009-12-21
| | | | | | | | | | | | | | | | | | | | The internal, driver-specific maintenance of sequence numbers is applicable only for HT frames. Also, remove comments that are not relevant anymore. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Last fix for TX software padding.Benoit Papillault2009-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | First, we copy/paste the padding stuff from ath9k_tx to ath_tx_cabq since it needs to same kind of padding, but for internally generated beacons. Next, software padding done on TX needs to be removed before calling ieee80211_tx_status. The code was already there in ath_tx_complete but it was wrong. Fix it by using ath9k_cmn_padpos. This later code has been tested by sending packets to a monitor interface and reading packets from the same interface. Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-12-11
|\ \ | |/ |/| | | | | Conflicts: include/net/tcp.h
| * Merge branch 'for-linus' of ↵Linus Torvalds2009-12-09
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
| | * Merge branch 'for-next' into for-linusJiri Kosina2009-12-07
| | |\ | | | | | | | | | | | | | | | | | | | | Conflicts: kernel/irq/chip.c
| | | * tree-wide: fix misspelling of "definition" in commentsAdam Buchbinder2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "Definition" is misspelled "defintion" in several comments; this patch fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * tree-wide: fix assorted typos all over the placeAndré Goddard Rosa2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * tree-wide: fix typos "offest" -> "offset"Uwe Kleine-König2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch was generated by git grep -E -i -l 'offest' | xargs -r perl -p -i -e 's/offest/offset/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * tree-wide: fix some typos and punctuation in commentsThadeu Lima de Souza Cascardo2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | fix some typos and punctuation in comments Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | ath9k: set ps_default as falseJohn W. Linville2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | ath5k: enable EEPROM checksum checkLuis R. Rodriguez2009-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this we have no gaurantee of the integrity of the EEPROM and are likely to encounter a lot of bogus bug reports due to actual issues on the EEPROM. With the EEPROM checksum check in place we can easily rule those issues out. If you run patch during a revert *you* have a card with a busted EEPROM and only older kernel will support that concoction. This patch is a trade off between not accepitng bogus EEPROMs and avoiding bogus bug reports allowing developers to focus instead on real concrete issues. If stable keeps bogus bug reports because of a possibly busted EEPROM feel free to apply this there too. Tested on an AR5414 Cc: stable@kernel.org Cc: jirislaby@gmail.com Cc: akpm@linux-foundation.org Cc: rjw@sisk.pl Cc: me@bobcopeland.com Cc: david.quan@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | ath5k: add support for Dell Vostro A860 LEDShahar Or2009-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the WiFi activity LED on the Dell Vostro A860 laptop. Signed-off-by: Shahar Or <shahar@shahar-or.co.il> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | ath9k: fix tx status reportingFelix Fietkau2009-12-07
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug in ath9k's tx status check, which caused mac80211 to consider regularly transmitted unicast frames as un-acked. When checking the ts_status field for errors, it needs to be masked with ATH9K_TXERR_FILT, because this field also contains other fields like ATH9K_TX_ACKED. Without this patch, AP mode is pretty much unusable, as hostapd checks the ACK status for the frames that it injects. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: enable 2GHz band only if the device supports itGabor Juhos2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the 2GHz band is enabled unconditionally, even if the device does not support it. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: separate debugfs support from CONFIG_ATH_DEBUGFelix Fietkau2009-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In my setups, ath9k's debugfs files are most of the time much more useful than the messages generated by enabling CONFIG_ATH_DEBUG along with the right debug flags. Since CONFIG_ATH_DEBUG comes with a noticeable overhead on embedded systems, this patch makes it possible to use the debugfs files without that option. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: Ensure a fair beacon distribution in IBSS mode.Vivek Natarajan2009-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the beacon queue parameters with best effort queue parameters for IBSS mode. This reduces the number of beacons generated by ath9k and ensures a fair beacon distribution when there are multiple IBSS stations. Also CWmin is quadrupled to achieve the expected percentage of distribution. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: Fix maximum tx fifo settings for single stream devicesLuis R. Rodriguez2009-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Atheros single stream AR9285 and AR9271 have half the PCU TX FIFO buffer size of that of dual stream devices. Dual stream devices have a max PCU TX FIFO size of 8 KB while single stream devices have 4 KB. Single stream devices have an issue though and require hardware only to use half of the amount of its capable PCU TX FIFO size, 2 KB and this requires a change in software. Technically a change would not have been required (except for frame burst considerations of 128 bytes) if these devices would have been able to use the full 4 KB of the PCU TX FIFO size but our systems engineers recommend 2 KB to be used only. We enforce this through software by reducing the max frame triggger level to 2 KB. Fixing the max frame trigger level should then have a few benefits: * The PER will now be adjusted as designed for underruns when the max trigger level is reached. This should help alleviate the bus as the rate control algorithm chooses a slower rate which should ensure frames are transmitted properly under high system bus load. * The poll we use on our TX queues should now trigger and work as designed for single stream devices. The hardware passes data from each TX queue on the PCU TX FIFO queue respecting each queue's priority. The new trigger level ensures this seeding of the PCU TX FIFO queue occurs as designed which could mean avoiding false resets and actually reseting hw correctly when a TX queue is indeed stuck. * Some undocumented / unsupported behaviour could have been triggered when the max trigger level level was being set to 4 KB on single stream devices. Its not clear what this issue was to me yet. Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Cc: Bennyam Malavazi <bennyam.malavazi@atheros.com> Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Shan Palanisamy <shan.palanisamy@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: Proper padding/unpadding for the TX/RX path.Benoit Papillault2009-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Software padding is done on the TX path and software unpadding is done on the RX path. This patch corrects the position where the padding occurs. A specific function computes the pad position and this function is used in the TX and RX path. This patch has been tested by generating every possible 802.11 frames with every possible frame_control field and a varying length. This patch is useful for analyzing non standard 802.11 frames going over the air Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: fix processing of TX PS null data framesLuis R. Rodriguez2009-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When mac80211 was telling us to go into Powersave we listened and immediately turned RX off. This meant hardware would not see the ACKs from the AP we're associated with and hardware we'd end up retransmiting the null data frame in a loop helplessly. Fix this by keeping track of the transmitted nullfunc frames and only when we are sure the AP has sent back an ACK do we go ahead and shut RX off. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Vivek Natarajan <Vivek.Natarajan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: clean up rc rate tableFelix Fietkau2009-11-28
| | | | | | | | | | | | | | | | | | | | | Remove some fields from struct ath_rate_table that are now unused. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: properly use the mac80211 rate control apiFelix Fietkau2009-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes ath9k to pass proper MCS indexes and flags between the RC and the rest of the driver code. sc->cur_rate_table remains, as it's used by the RC code internally, but the rest of the driver code no longer uses it, so a potential new RC for ath9k would not have to update it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: remove warnings related to signed/unsigned type mismatchJohn W. Linville2009-11-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | CC [M] drivers/net/wireless/ath/ath9k/recv.o drivers/net/wireless/ath/ath9k/recv.c: In function `ath_rx_prepare': drivers/net/wireless/ath/ath9k/recv.c:208: warning: comparison is always true due to limited range of data type drivers/net/wireless/ath/ath9k/recv.c:220: warning: comparison is always false due to limited range of data type Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: set ps_default as falseJohn W. Linville2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 (This is for 2.6.33 and beyond, where the bool was changed to a flag by "cfg80211: convert bools into flags". -- JWL) Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath5k: Fix I/Q calibrationLukáš Turek2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sign of correction coefficients was lost in the calculations, which caused high packetloss in 802.11a mode after the results were applied. Fixed by removing unneccesary and broken AND with a bit mask. Signed-off-by: Lukas Turek <8an@praha12.net> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: This patch fix RX unpadding for any received frame.Benoit PAPILLAULT2009-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been tested with a 802.11 frame generator and by checking the FCS field of each received frame with the value reported by the Atheros hardware. This patch is useful if you are trying to analyze non standard 802.11 frame going over the air. Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | cfg80211: convert bools into flagsJohannes Berg2009-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | We've accumulated a number of options for wiphys which make more sense as flags as we keep adding more. Convert the existing ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ar9170: Add support for D-Link DWA 160 A2Thomas Klute2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At least two revisions of the D-Link DWA 160 exist, called A1 and A2. A1 (USB-ID 07d1:3c10) is already listed in usb.c as D-Link DWA 160A. A2 (USB-ID 07d1:3a09) works if added to ar9170_usb_ids. I didn't do much testing until now, but I was able to connect to APs using WPA or WEP and transmit data. Summary: * Add model revision number to the comment for D-Link DWA 160 A1 (07d1:3c10) * Add support for D-Link DWA 160 A2 (07d1:3a09) Signed-off-by: Thomas Klute <thomas2.klute@uni-dortmund.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | mac80211: convert aggregation to operate on vifs/stasJohannes Berg2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The entire aggregation code currently operates on the hw pointer and station addresses, but that needs to change to make stations purely per-vif; As one step preparing for that make the aggregation code callable with the station, or by the combination of virtual interface and station address. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: Fix bug in initializing chain masksSujith2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Check for AR5416 ver 1.0 before calibrating 3 chains for multi-chain. This is a WAR for calibration failure. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: Remove a few unused functionsSujith2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ATH9K_ANT_VARIABLE is the default diversity control used. Consequently ath9k_hw_decrease_chain_power() does nothing. ath9k_hw_setantennaswitch() is unused too. Also, gbeacon_rate is unused. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: Remove a few unused variablesSujith2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | axq_linkbuf, axq_aggr_depth, axq_lastdsWithCTS and axq_gatingds are unused. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: Cleanup bss_info_changed callbackSujith2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Remove a code chunk dealing with operating mode changes. As noted, all such policy changes are to be done in add_interface. * Remove pointless check for empty BSSID. Also, remove mode checks - mac80211 does all the needed checks. * Handle enabling/disabling beacon transmission properly. * Handle beacon interval changes for AP mode. The original code depended on config_interface() to update the HW TSF. Since that callback has been removed, handle it properly. * Remove unneeded code dealing with key/privacy. * Set the chainmasks to 1x1 for IBSS when the BSSID is set. This was happening uncondionally before. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath9k: get rid of tx_info_privFelix Fietkau2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the need for separately allocated private tx info data in ath9k and brings the driver one small step closer to using the mac80211 rate control API properly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ar9170: do not discard valuable DUPOFDM framesChristian Lamparter2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | This patch enables the driver to process all incoming dupofdm-modulated frames when operating in HT40 mode. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ath5k: allow setting txpower to 0Bob Copeland2009-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a holdover from earlier code when we used to set the power limit to '0' after a reset to configure the default transmit power, ath5k interprets txpower=0 as 12.5 dBm. Fix that by just passing 0 through. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14567 Cc: stable@kernel.org Reported-by: Daniel Folkers <daniel.folkers@task24.nl> Tested-by: Daniel Folkers <daniel.folkers@task24.nl> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-12 19:52:23 -0400