aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/ath9k.h
Commit message (Collapse)AuthorAge
* ath9k: implement .tx_last_beacon()Felix Fietkau2011-05-19
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Drag the driver to the year 2011Sujith Manoharan2011-05-19
| | | | | | | The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: define antenna diversity groupMohammed Shafi Shajakhan2011-05-16
| | | | | | | | | | | | | AR9285 belongs to diversity group 0 and AR9485 belongs to diversity group 2. Based on the diversity group we configure certain antenna diversity paramaters such as lna1_lna2_delta and fast diversity bias values. For AR9485 we have some gain table parameter which selects the gain table 0/1 for main and alternate antenna Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: avoid enabling interrupts while processing rxRajkumar Manoharan2011-05-10
| | | | | | | | | | | | The assumsion is that while processing ath9k tasklet, interrupts were already disabled and it will be enabled at the completion of ath9k tasklet. But whenever TSFOOR is raised, the driver configures the beacon timers after having received a beacon frame from the AP which inturn enables the interrupts. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove aggregation protection modeMohammed Shafi Shajakhan2011-05-05
| | | | | | | | | when aggregation protection mode is enabled the hardware needs to send RTS/CTS for each HT frame. Currently its disabled so remove the unused call backs. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: cleanup hw pll work handlerSenthil Balasubramanian2011-04-25
| | | | | | | | | There is no reason why pll work handler should be part of xmit file. move it to main.c so that reading hw check routines are all in the same place. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix LED gpio for AR93xx chipsets.Senthil Balasubramanian2011-04-25
| | | | | | | | | The LED gpio is incorrectly programmed for AR9300 and so the led is not working propelry. AR93xx uses gpio 10 for LED and not the default. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: assign keycache slots to unencrypted stationsFelix Fietkau2011-04-19
| | | | | | | | | | | | Frame filtering relies on having a valid destination index (keycache slot), to keep track of the destination. Assigning a keycache slot (configured to unencrypted, with no key data attached) improves powersave handling in AP mode with no encryption. The dummy keycache entry for a station is cleared, when a real key gets added. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix powersave frame filtering/buffering in AP modeFelix Fietkau2011-04-19
| | | | | | | | | | | | | | | | | | This patch fixes a long standing issue of pending packets in the queue being sent (and retransmitted many times) to sleeping stations. This was made worse by aggregation through driver-internal retransmitting of A-MDPU subframes. Previously the hardware tx filter was cleared unconditionally for every single packet - with this patch it uses the IEEE80211_TX_CTL_CLEAR_PS_FILT for unaggregated frames. A sta_notify driver op is added to stop aggregation for stations when they enter powersave mode. Subframes stay buffered inside the driver, to ensure that the BlockAck window keeps a sane state. Since the driver uses software aggregation, the clearing of the tx filter needs to be handled by the driver instead of mac80211 for aggregated frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: introduce ATH9K_{PCI,AHB} config optionsGabor Juhos2011-04-13
| | | | | | | | | | | | | | | | | | | | | Currently ath9k only available in menuconfig if PCI bus support is enabled. However the driver is required for the built-in wireless MACs of the Atheros AR9130/AR9132 SoCs. These SoCs have no PCI controller, the wireless MAC is connected to the AHB bus on them. Introduce separated config options for the supported buses, in order to allow building of ath9h without PCI bus support. As a bonus, this patch removes the cross-reference of the ATHEROS_AR71XX option which is not present in the kernel. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: configure beacons based on hw opmodeRajkumar Manoharan2011-04-07
| | | | | | | | | | | | | | | | Current ath9k code does not handle beacon timers on opmode specific. One such example is that a STA beacon config overwrites already configured AP vif's beacon timers during scan. On multi station vif case, configure beacon timers beased on primary vif selected. This also helps while moving back to single STA vif from multi STA vifs, where the power save is enabled and hw has to be reconfigured with proper beacon and bssid/aid. Otherwise connection poll will be triggered so frequently due to beacon loss. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Handle BSSID/AID for multiple interfacesRajkumar Manoharan2011-04-07
| | | | | | | | | | | As of now bssid/aid is overridden with recently changed vif's bss config. This may cause improper beacon updation due to bssid/aid mismatch. On station mode, select an associated sta vif as primary vif and configure that vif's bss into hw. Update the primary vif on interface change and bss info change. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Cleanup ath_vif structRajkumar Manoharan2011-04-07
| | | | | | | | Remove unused bssid from ath_vif and set av_bslot on beacon alloc/return. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: cleanup few redundant macrosMohammed Shafi Shajakhan2011-04-04
| | | | | Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix stuck beacon detectionFelix Fietkau2011-03-30
| | | | | | | | | | | | | | | Stuck beacon detection is supposed to trigger when 9 consecutive beacons could not be sent by the hardware. When the driver runs only one active AP mode interface, it still configures the hardware beacon timer for 4 (ATH_BCBUF) beacon slots slots, which causes stuck beacon detection to be reset if ath9k_hw_stoptxdma clears the stuck frames between SWBA intervals. Fix this by not resetting the missed beacon count for empty slots and multiplying the threshold not by the maximum number of beacon slots but by the configured number of beacon interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix beacon timer handling issuesFelix Fietkau2011-03-30
| | | | | | | | | | | | | | | | AP mode beacon timers in ath9k are configured in milliseconds, which breaks when increasing ATH_BCBUF to 8 instead of 4 (due to rounding errors). Since the hardware timers are actually configured in microseconds, it's better to let the driver use that unit directly. To be able to do that, the beacon interval parameter abuse for passing certain flags needs to be removed. This is easy to do, because those flags are completely unnecessary anyway. ATH9K_BEACON_ENA is ignored, ATH9K_BEACON_RESET_TSF can be replaced with calling ath9k_hw_reset_tsf from the driver directly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix the .flush driver op implementationFelix Fietkau2011-03-14
| | | | | | | | | This patch simplifies the flush op and reuses ath_drain_all_txq for flushing out pending frames if necessary. It also uses a global timeout of 200ms instead of the per-queue 60ms timeout. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix incorrect GPIO LED pin for AR9485Senthil Balasubramanian2011-02-28
| | | | | | | | AR9485 doesn't use the default GPIO pin for LED and GPIO 6 is actually used for this. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: use generic mac80211 LED blinking codeFelix Fietkau2011-02-28
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Implement op_flush()Vasanthakumar Thiagarajan2011-02-21
| | | | | | | | | | When op_flush() is called with no drop (drop=false), the driver tries to tx as many frames as possible in about 100ms on every hw queue. During this time period frames from sw queue are also scheduled on to respective hw queue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2011-02-18
|\ | | | | | | | | | | Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
| * ath9k: Fix ath9k prevents CPU to enter C3 statesMohammed Shafi Shajakhan2011-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA latency issue is observed only in Intel pinetrail platforms but in the driver we had a default PM-QOS value of 55. This caused unnecessary power consumption and battery drain in other platforms. Remove the pm-qos thing in the driver code and address the throughput issue in Intel pinetrail platfroms in user space using any one of the scripts in below links: http://www.kernel.org/pub/linux/kernel/people/mcgrof/scripts/cpudmalatency.c http://johannes.sipsolutions.net/files/netlatency.c.txt More details can be found in the following bugzilla link: https://bugzilla.kernel.org/show_bug.cgi?id=27532 This reverts the following commits: 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b 4dc3530df7c0428b41c00399a7ee8c929406d181 10598c124ecabbbfd7522f74de19b8f7d52a1bee Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix possible double free of PAPRD skb'sMohammed Shafi Shajakhan2011-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [<c05c6468>] ? printk+0x2d/0x35 [ 194.193732] [<c05c63c3>] panic+0x5a/0xd2 [ 194.193741] [<c05ca3ed>] oops_end+0xcd/0xd0 [ 194.193750] [<c0105f74>] die+0x54/0x80 [ 194.193758] [<c05c9a16>] do_trap+0x96/0xc0 [ 194.193837] [<c0103fb0>] ? do_invalid_op+0x0/0xa0 [ 194.193846] [<c010403b>] do_invalid_op+0x8b/0xa0 [ 194.193856] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193866] [<c012ce18>] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [<c01de47a>] ? free_one_page+0x12a/0x2d0 [ 194.193888] [<c01e04dc>] ? __free_pages+0x1c/0x40 [ 194.193897] [<c05c97a7>] error_code+0x73/0x78 [ 194.193906] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193915] [<c04ecdd0>] ? skb_release_data+0x70/0xa0 [ 194.193924] [<c04ecdd0>] skb_release_data+0x70/0xa0 [ 194.193933] [<c04ec997>] __kfree_skb+0x17/0x90 [ 194.193941] [<c04eca31>] consume_skb+0x21/0x40 [ 194.193964] [<f85e0b70>] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [<f85caddf>] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [<c04ec40e>] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [<f85cc803>] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [<c0108a28>] ? sched_clock+0x8/0x10 [ 194.194030] [<c016bf14>] ? sched_clock_local+0xa4/0x180 [ 194.194040] [<c0139f57>] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [<c013a194>] ? enqueue_entity+0x174/0x200 [ 194.194064] [<f85ce83d>] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [<f85c7b9f>] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [<c01505d7>] tasklet_action+0xa7/0xb0 [ 194.194107] [<c015127c>] __do_softirq+0x9c/0x1b0 [ 194.194117] [<c01a7f64>] ? irq_to_desc+0x14/0x20 [ 194.194126] [<c0124fc4>] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [<c01513d5>] do_softirq+0x45/0x50 [ 194.194145] [<c0151545>] irq_exit+0x65/0x70 [ 194.194153] [<c05cf665>] do_IRQ+0x55/0xc0 [ 194.194162] [<c016a6c7>] ? hrtimer_start+0x27/0x30 [ 194.194171] [<c0103630>] common_interrupt+0x30/0x38 [ 194.194181] [<c012c21a>] ? native_safe_halt+0xa/0x10 [ 194.194268] [<c010a2f9>] default_idle+0x49/0xb0 [ 194.194277] [<c0101fcc>] cpu_idle+0x8c/0xd0 [ 194.194286] [<c05b2431>] rest_init+0x71/0x80 [ 194.194295] [<c081981a>] start_kernel+0x36e/0x374 [ 194.194305] [<c08199dd>] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [<c08190d7>] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: disable beaconing before stopping beacon queueRajkumar Manoharan2011-02-14
| | | | | | | | | | | | | | | | | | | | Beaconing should be disabled before stopping beacon queue. Not doing so could queue up beacons in hw that causes failure to stop Tx DMA, due to pending frames in hw and also unnecessary beacon tasklet schedule. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove redundant beacon_intervalSteve Brown2011-02-09
| | | | | | | | | | | | | | | | | | | | The variable appears in both ath_softc and ath_beacon_config. The struct ath_beacon_config is embedded in ath_softc. The redundant variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8. Signed-off-by: Steve Brown <sbrown@cortland.com> Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: add additional checks for the baseband hang detectionFelix Fietkau2011-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since even with the latest changes the false positive issue of the baseband hang check is not fully solved yet, additional checks are needed. If the baseband hang occurs, the rx_clear signal will be stuck to high, so we can use the cycle counters to confirm it. With this patch, a hardware reset is only triggered if the baseband hang check returned true three times in a row, with a beacon interval between each check and if the busy time was also 99% or more during the check intervals. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: use common API to avoid code duplicationRajkumar Manoharan2011-01-28
| | | | | | | | | | Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Fix a PLL hang issue observed with AR9485.Vivek Natarajan2011-01-28
| | | | | | | | | | | | | | | | | | | | When this PLL hang issue is seen, both Rx and Tx fail to work. The sqsum_dvc needs to be below 2000 for a good chip. During this issue the sqsum_dvc value is beyond 80000 and only a full reset can solve this problem. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: use split rx buffers to get rid of order-1 skb allocationsFelix Fietkau2011-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | With this change, less CPU time is spent trying to look for consecutive pages for rx skbs. This also reduces the socket memory required for IP/UDP reassembly. Only two buffers per frame are supported. Frames spanning more buffers will be dropped, but the buffer size is enough to handle the required AMSDU size. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove unused IEEE80211_WEP_NKIDBruno Randolf2011-01-28
| | | | | | | | | | | | | | | | IEEE80211_WEP_NKID is not used in ath9k any more since the key handling code has been moved to ath/. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: fold struct ath_wiphy into struct ath_softcFelix Fietkau2011-01-28
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove the bf->aphy fieldFelix Fietkau2011-01-28
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: remove support for virtual wiphysFelix Fietkau2011-01-28
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: clean up enums and unused macrosMohammed Shafi Shajakhan2011-01-26
| | | | | | | | | | | | | | Remove unused macros and cleanup buffer_type enumeration Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Restart xmit logic in xmit watchdog.Ben Greear2011-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The system can get into a state where the xmit queue is stopped, but there are no packets pending, so the queue will not be restarted. Add logic to the xmit watchdog to attempt to restart the xmit logic if this situation is detected. Example 'dmesg' output: ath: txq: f4e723e0 axq_qnum: 2, mac80211_qnum: 2 axq_link: f4e996c8 pending frames: 1 axq_acq empty: 1 stopped: 0 axq_depth: 0 Attempting to restart tx logic. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Keep track of stations for debugfs.Ben Greear2011-01-21
| | | | | | | | | | | | | | | | | | | | The stations hold the ath_node, which holds the tid and other xmit logic structures. In order to debug stuck xmit logic, we need a way to print out the tid state for the stations. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Remove un-used member from ath_node.Ben Greear2011-01-21
| | | | | | | | | | Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Fix up hardware mode and beacons with multiple vifs.Ben Greear2011-01-19
|/ | | | | | | | | | | | | | | | | | When using a mixture of AP and Station interfaces, the hardware mode was using the type of the last VIF registered. Instead, we should keep track of the number of different types of vifs and set the mode accordingly. In addtion, use the vif type instead of hardware opmode when dealing with beacons. Attempt to move some of the common setup code into smaller methods so we can re-use it when changing vif mode as well as adding/deleting vifs. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: qualify global modparam_nohwcrypt variableJohn W. Linville2011-01-05
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Reset keycache on resumeMohammed Shafi Shajakhan2010-12-22
| | | | | | | | | | | | | | It looks like some hardware registers are left into undefined state after suspend/resume. At minimum, this can cause odd issues related to key cache and hardware trying to encrypt/decrypt frames unexpectedly. This seems to happen even when there is no keys configured, i.e., hardware can end up touching TX frames just based of invalid key cache context even if the driver is not asking a specific entry to be used. In addition, RX can likely be affected. This patch fixes this issue. Signed-off-by: Jouni Malinen <Jouni.Malinen@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix warnings on card removalRajkumar Manoharan2010-12-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The recently added warning message on power change failure is not needed on device removal. ath: Failed to wakeup in 500us ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/hw.c:1618 ath9k_hw_setpower+0x61f/0x630 [ath9k_hw]() Hardware name: 64756D6 Pid: 540, comm: kworker/u:3 Not tainted 2.6.37-rc6-wl #37 Call Trace: [<ffffffff810501aa>] warn_slowpath_common+0x7a/0xb0 [<ffffffffa056e280>] ? ath9k_iowrite32+0x0/0x90 [ath9k] [<ffffffff810501f5>] warn_slowpath_null+0x15/0x20 [<ffffffffa05226ef>] ath9k_hw_setpower+0x61f/0x630 [ath9k_hw] [<ffffffffa05700e5>] ath9k_ps_wakeup+0x85/0xd0 [ath9k] [<ffffffffa0570685>] ath9k_configure_filter+0x25/0x80 [ath9k] [<ffffffffa04dde43>] ieee80211_configure_filter+0x133/0x190 [mac80211] [<ffffffffa04ee502>] ieee80211_do_stop+0x132/0x540 [mac80211] [<ffffffff813466ff>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff812b6923>] ? dev_deactivate+0x1c3/0x1e0 [<ffffffffa04ee925>] ieee80211_stop+0x15/0x20 [mac80211] [<ffffffff8129d1b6>] __dev_close+0x56/0x90 Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: do not limit the chainmask to 1 for legacy modeFelix Fietkau2010-12-20
| | | | | | | | | | Restricting the chainmask to 1 for legacy mode disables useful features such as MRC, and it reduces the available transmit power. I can't think of a good reason to do this in legacy mode, so let's just get rid of that code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix queue depth check for forming new aggregatesFelix Fietkau2010-12-20
| | | | | | | | | | | | | | To improve aggregation length, there should not be more than two fully formed A-MPDU frames in the hardware queue. To ensure this, the code checks the tx queue length before forming new A-MPDUs. This can reduce the throughput (or maybe even starve out A-MPDU traffic) when too many non-aggregated frames are in the queue. Fix this by keeping track of pending A-MPDU frames (even when they're sent out as single frames), but exclude rate control probing frames to improve performance. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Make PM-QOS value as user configurableMohammed Shafi Shajakhan2010-12-15
| | | | | | | | | | | | | | | This patch allows the pm-qos value to be user configurable by making it as a module parameter.This will help our customers to configure the pm-qos value according to the effect in throughput due to the DMA latency problem which was observed in Intel Pinetrail platforms. The tested value of '55' will be filled as the default pm-qos-value incase the user does not specifies pm-qos value as a module parameter. example usage: sudo modprobe ath9k pmqos=65 Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-12-08
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ath9k.h drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/ath/ath9k/xmit.c
| * ath9k: fix a DMA related race condition on resetFelix Fietkau2010-12-07
| | | | | | | | | | | | | | | | | | | | | | | | When ath_drain_all_txq fails to stop DMA, it issues a hw reset. This reset happens at a very problematic point in time, when the hardware rx path has not been stopped yet. This could lead to memory corruption, hardware hangs or other issues. To fix these issues, simply remove the reset entirely and check the tx DMA stop status to prevent problems with fast channel changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-12-02
|\| | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
| * ath9k: use per-device struct for pm_qos_* operationsGabor Juhos2010-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ath9k driver uses a shared pm_qos_request_list structure for all devices. This causes the following warning if more than one device is present in the system: WARNING: at kernel/pm_qos_params.c:234 ath9k_init_device+0x5e8/0x6b0() pm_qos_add_request() called for already added request Modules linked in: Call Trace: [<802b1cdc>] dump_stack+0x8/0x34 [<8007dd90>] warn_slowpath_common+0x78/0xa4 [<8007de44>] warn_slowpath_fmt+0x2c/0x38 [<801b0828>] ath9k_init_device+0x5e8/0x6b0 [<801bc508>] ath_pci_probe+0x2dc/0x39c [<80176254>] pci_device_probe+0x64/0xa4 [<8019471c>] driver_probe_device+0xbc/0x188 [<80194854>] __driver_attach+0x6c/0xa4 [<80193e20>] bus_for_each_dev+0x60/0xb0 [<80193580>] bus_add_driver+0xcc/0x268 [<80194c08>] driver_register+0xe0/0x198 [<801764e0>] __pci_register_driver+0x50/0xe0 [<80365f48>] ath9k_init+0x3c/0x6c [<8006050c>] do_one_initcall+0xfc/0x1d8 [<80355340>] kernel_init+0xd4/0x174 [<800639a4>] kernel_thread_helper+0x10/0x18 ---[ end trace 5345fc6f870564a6 ]--- This patch fixes that warning by using a separate pm_qos_request_list sructure for each device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: Add support for Adaptive Power ManagementMohammed Shafi Shajakhan2010-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is to mitigate the problem of certain 3 stream chips that exceed the PCIe power requirements.An EEPROM flag controls which chips have APM enabled which is basically read from miscellaneous configuration element of the EEPROM header. This workaround will reduce power consumption by using 2 Tx chains for Single and Double stream rates (5 GHz only).All self generated frames (regardless of rate) are sent on 2 chains when this feature is enabled(Chip Limitation). Cc: Paul Shaw <paul.shaw@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-11-24
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 23:26:34 -0500