aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb
Commit message (Collapse)AuthorAge
* dm9601: support dm9620 variantPeter Korsgaard2013-01-28
| | | | | | | | | | | | | | | dm9620 is a newer variant of dm9601 with more features (usb 2.0, checksum offload, ..), but it can also be put in a dm9601 compatible mode, allowing us to reuse the existing driver. This does mean that the extended features like checksum offload cannot be used, but that's hardly critical on a 100mbps interface. Thanks to Sławek Wernikowski <slawek@wernikowski.net> for providing me with a dm9620 based device to test. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_ncm: use IAD provided by the USB coreBjørn Mork2013-01-27
| | | | | | | | | | | | | commit 9992c2e (net: cdc_ncm: workaround for missing CDC Union) added code to lookup an IAD for the interface we are probing. This is redundant. The USB core has already done the lookup and saved the result in the USB interface struct. Use that instead. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_mbim: send ZLP only for the specific buggy deviceBjørn Mork2013-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reverting 328d7b8 and instead adding an exception for the Sierra Wireless MC7710. commit 328d7b8 (net: cdc_mbim: send ZLP after max sized NTBs) added a workaround for an issue observed on one specific device. Concerns were raised that this workaround adds a performance penalty to all devices based on questionable, if not buggy, behaviour of a single device: "If you add ZLP for NTBs of dwNtbOutMaxSize, you are heavily affecting CPU load, increasing interrupt load by factor of 2 in high load traffic scenario and possibly decreasing throughput for all other devices which behaves correctly." "The idea of NCM was to avoid extra ZLPs. If your transfer is exactly dwNtbOutMaxSize, it's known, you can submit such request on the receiver side and you do not need any EOT indicatation, so the frametime can be used for useful data." Adding a device specific exception to prevent the workaround from affecting well behaved devices. The assumption here is that needing a ZLP is truly an *exception*. We do not yet have enough data to verify this. The generic workaround in commit 328d7b8 should be considered acceptable despite the performance penalty if the exception list becomes a maintainance hassle. Cc: Alexey ORISHKO <alexey.orishko@stericsson.com> Cc: Yauheni Kaliuta <y.kaliuta@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* cdc_ncm: add support FLAG_NOARP for Infineon modem platformWei Shuai2013-01-21
| | | | | | | | | Infineon(now Intel) HSPA Modem platform NCM cannot support ARP. we can define a new common structure wwan_noarp_info. Then more similiar NO ARP devices can be handled easily Signed-off-by: Wei Shuai <cpuwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: add new flag FLAG_NOARP for usb net devicesWei Shuai2013-01-21
| | | | | | | | | We do have some USB net devices, which cannot do ARP. so we can introduce a new flag FLAG_NOARP, then client drivers can easily handle this kind of devices Signed-off-by: Wei Shuai <cpuwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_ncm: fix error path for single interface probingBjørn Mork2013-01-21
| | | | | | | | | | commit bbc8d92 (net: cdc_ncm: add Huawei devices) implemented support for devices with a single combined control and data interface. Fix up the error path so that we do not double release such interfaces in case of probing failures. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_mbim: send ZLP after max sized NTBsBjørn Mork2013-01-21
| | | | | | | | | | | | | | | We normally avoid sending ZLPs by padding NTBs with a zero byte if the NTB is shorter than dwNtbOutMaxSize, resulting in a short USB packet instead of a ZLP. But in the case where the NTB length is exactly dwNtbOutMaxSize and this is an exact multiplum of wMaxPacketSize, then we must send a ZLP. This fixes an issue seen on a Sierra Wireless MC7710 device where the transmission would fail whenever we ended up padding the NTBs to max size. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cdc_ncm: workaround for missing CDC UnionBjørn Mork2013-01-21
| | | | | | | | | | | | | | | | | | | | Adding support for the MBIM mode in some Sierra Wireless devices. Some Sierra Wireless firmwares support CDC MBIM but have no CDC Union funtional descriptor. This violates the MBIM specification, but we can easily work around the bug by looking at the Interface Association Descriptor instead. This is most likely what Windows uses too, which explains how the firmware bug has gone unnoticed until now. This change will not affect any currently supported device conforming to the NCM or MBIM specifications, as they must have the CDC Union descriptor. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add ONDA MT8205 4G LTEBjørn Mork2013-01-19
| | | | | | | | | | | | | | The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add TP-LINK HSUPA Modem MA180Bjørn Mork2013-01-16
| | | | | | | | | | | | | | | | | | | | | The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 The "Networkcard" function has been verified to support these QMI services: ctl (1.3) wds (1.3) dms (1.2) nas (1.0) Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: dm9601: Fix incorrect commandTushar Behera2013-01-16
| | | | | | | | | | | commit 24b1042c4eb2 ("usbnet: dm9601: apply introduced usb command APIs") removes the distiction between DM_WRITE_REG and DM_WRITE_REGS command. The distiction is reintroduced to the driver so that the functionality of the driver remains same. CC: Ming Lei <ming.lei@canonical.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add Telekom Speedstick LTE IIBjørn Mork2012-12-28
| | | | | | | | | | | | | | | | also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: add ZTE MF880Bjørn Mork2012-12-19
| | | | | | | | | | | | | | The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* use generic usbnet_manage_power()Oliver Neukum2012-12-19
| | | | | | | | This covers the drivers that can use a primitive implementation. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: generic manage_power()Oliver Neukum2012-12-19
| | | | | | | | Centralise common code for manage_power() in usbnet by making a generic simple implementation Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: handle PM failure gracefullyOliver Neukum2012-12-19
| | | | | | | | | If a device fails to do remote wakeup, this is no reason to abort an open totally. This patch just continues without runtime PM. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* cdc_ether: cleanup: use USB_DEVICE_AND_INTERFACE_INFO for Novatel 551/E362Dan Williams2012-12-17
| | | | | Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qmi_wwan/cdc_ether: add Dell Wireless 5800 (Novatel E362) USB IDsDan Williams2012-12-17
| | | | | | | Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2012-12-12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David Miller: 1) Allow to dump, monitor, and change the bridge multicast database using netlink. From Cong Wang. 2) RFC 5961 TCP blind data injection attack mitigation, from Eric Dumazet. 3) Networking user namespace support from Eric W. Biederman. 4) tuntap/virtio-net multiqueue support by Jason Wang. 5) Support for checksum offload of encapsulated packets (basically, tunneled traffic can still be checksummed by HW). From Joseph Gasparakis. 6) Allow BPF filter access to VLAN tags, from Eric Dumazet and Daniel Borkmann. 7) Bridge port parameters over netlink and BPDU blocking support from Stephen Hemminger. 8) Improve data access patterns during inet socket demux by rearranging socket layout, from Eric Dumazet. 9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and Jon Maloy. 10) Update TCP socket hash sizing to be more in line with current day realities. The existing heurstics were choosen a decade ago. From Eric Dumazet. 11) Fix races, queue bloat, and excessive wakeups in ATM and associated drivers, from Krzysztof Mazur and David Woodhouse. 12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions in VXLAN driver, from David Stevens. 13) Add "oops_only" mode to netconsole, from Amerigo Wang. 14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also allow DCB netlink to work on namespaces other than the initial namespace. From John Fastabend. 15) Support PTP in the Tigon3 driver, from Matt Carlson. 16) tun/vhost zero copy fixes and improvements, plus turn it on by default, from Michael S. Tsirkin. 17) Support per-association statistics in SCTP, from Michele Baldessari. And many, many, driver updates, cleanups, and improvements. Too numerous to mention individually. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) net/mlx4_en: Add support for destination MAC in steering rules net/mlx4_en: Use generic etherdevice.h functions. net: ethtool: Add destination MAC address to flow steering API bridge: add support of adding and deleting mdb entries bridge: notify mdb changes via netlink ndisc: Unexport ndisc_{build,send}_skb(). uapi: add missing netconf.h to export list pkt_sched: avoid requeues if possible solos-pci: fix double-free of TX skb in DMA mode bnx2: Fix accidental reversions. bna: Driver Version Updated to 3.1.2.1 bna: Firmware update bna: Add RX State bna: Rx Page Based Allocation bna: TX Intr Coalescing Fix bna: Tx and Rx Optimizations bna: Code Cleanup and Enhancements ath9k: check pdata variable before dereferencing it ath5k: RX timestamp is reported at end of frame ath9k_htc: RX timestamp is reported at end of frame ...
| * smsc95xx: fix async register writes on big endian platformsSteve Glendinning2012-12-10
| | | | | | | | | | | | | | | | | | | | | | This patch fixes a missing endian conversion which results in the interface failing to come up on BE platforms. It also removes an unnecessary pointer dereference from this function. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc95xx: fix register dump of last registerSteve Glendinning2012-12-10
| | | | | | | | | | | | | | | | | | This patch fixes the ethtool register dump for smsc95xx to dump all 4 bytes of the final register (COE_CR) instead of just the first byte. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc75xx: only set mac address once on bindSteve Glendinning2012-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes when we decide what the device's MAC address is from per ifconfig up to once when the device is connected. Without this patch, a manually forced device MAC is overwritten on ifconfig down/up. Also devices that have no EEPROM are assigned a new random address on ifconfig down/up instead of persisting the same one. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Reported-by: Robert Cunningham <rcunningham@nsmsurveillance.com> Cc: Bjorn Mork <bjorn@mork.no> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc95xx: expand check_ macrosSteve Glendinning2012-11-30
| | | | | | | | | | | | | | | | | | These macros, while reducing the amount of code, hide flow control and make the code more confusing to follow and review. This patch expands them. It should have no functional effect on the driver. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc95xx: fix smsc_crc return typeSteve Glendinning2012-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug introduced in bbd9f9e which could prevent some wakeups from working correctly if multiple wol options were selected. This helper function calculates a 16-bit crc and shifts it into either the high or low 16 bits of a u32 so the caller can or it directly into place. The function previously had a u16 return type so would always have returned zero when filter was odd. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Reported-by: Bjorn Mork <bjorn@mork.no> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc95xx: don't enable remote wakeup directlySteve Glendinning2012-11-30
| | | | | | | | | | | | | | | | | | As pointed out by Bjorn Mork, the generic "usb" driver sets this for us so no need to directly set it in this driver. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Cc: Bjorn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc95xx: fix error handling in suspend failure caseSteve Glendinning2012-11-30
| | | | | | | | | | | | | | | | | | This patch ensures that if we fail to suspend the LAN9500 device we call usbnet_resume before returning failure, instead of leaving the usbnet driver in an unusable state. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc95xx: fix suspend buffer overflowSteve Glendinning2012-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a buffer overflow introduced by bbd9f9e, where the filter_mask array is accessed beyond its bounds. Updated to also add a check for kzalloc failure, as reported by Bjorn Mork and Joe Perches. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Cc: Bjorn Mork <bjorn@mork.no> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc75xx: expand check_ macrosSteve Glendinning2012-11-30
| | | | | | | | | | | | | | | | | | These macros, while reducing the amount of code, hide flow control and make the code more confusing to follow and review. This patch expands them. It should have no functional effect on the driver. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc75xx: don't call usbnet_resume if usbnet_suspend failsSteve Glendinning2012-11-30
| | | | | | | | | | | | | | | | | | | | | | | | If usbnet_suspend returns an error we don't want to call usbnet_resume to clean up, but instead just return the error. If usbnet_suspend *does* succeed, and we have a problem further on, the desired behaviour is still to call usbnet_resume to clean up before returning. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-11-29
| |\ | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc75xx: don't enable remote wakeup directlySteve Glendinning2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed out by Bjorn Mork, the generic "usb" driver sets this for us so no need to directly set it in this driver. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Cc: Bjorn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc75xx: add support for USB dynamic autosuspendSteve Glendinning2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for USB dynamic autosuspend to the smsc75xx driver. This saves virtually no power in the USB device but enables power savings in upstream hosts and the host CPU. Note currently Linux doesn't automatically enable this functionality by default for devices so to test this: echo auto > /sys/bus/usb/devices/2-1.2/power/control where 2-1.2 is the USB bus address of the LAN7500. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc75xx: fix error handling in suspend failure caseSteve Glendinning2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch ensures that if we fail to suspend the LAN7500 device we call usbnet_resume before returning failure, instead of leaving the usbnet driver in an unusable state. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc75xx: support PHY wakeup sourceSteve Glendinning2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables LAN7500 family devices to wake from suspend on either link up or link down events. It also adds _nopm versions of mdio access functions, so we can safely call them from suspend and resume functions Updated patch to add newlines to printk messages Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc75xx: refactor entering suspend modesSteve Glendinning2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch splits out the logic for entering suspend modes to separate functions, to reduce the complexity of the smsc75xx_suspend function. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc75xx: check return code from smsc75xx_resetSteve Glendinning2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a missing check and error message if smsc75xx_reset fails. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc: Add logging message newlinesJoe Perches2012-11-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid any possible message logging interleaving by adding missing newlines. Align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | asix: use ramdom hw addr if the one read is not validJean-Christophe PLAGNIOL-VILLARD2012-11-23
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc95xx: refactor entering suspend modesSteve Glendinning2012-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch splits out the logic for entering suspend modes to separate functions, to reduce the complexity of the smsc95xx_suspend function. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc95xx: support PHY wakeup sourceSteve Glendinning2012-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables LAN9500 family devices to wake from suspend on either link up or link down events It also adds _nopm versions of mdio access functions, so we can safely call them from suspend and resume functions Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc95xx: detect chip revision specific featuresSteve Glendinning2012-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of storing the number of wake-up frame filter registers in the pdata structure, this patch changes the driver to detect the type of device we have and store its available features. The new two features will be used in future patches. This patch is intended to have no change in behaviour. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | smsc95xx: fix error checking of usbnet_resumeSteve Glendinning2012-11-23
| | | | | | | | | | | | | | | | | | | | | without this patch the two lines below won't ever execute Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-11-17
| |\ \ | | | | | | | | | | | | | | | | | | | | Minor line offset auto-merges. Signed-off-by: David S. Miller <davem@davemloft.net>
| * \ \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-11-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | usbnet: runtime wake up device before calling usbnet_{read|write}_cmdMing Lei2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch gets the runtime PM reference count before calling usbnet_{read|write}_cmd, and puts it after completion of the usbnet_{read|write}_cmd, so that the usb control message can always be sent to one active device in the non-PM context. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | usbnet: smsc95xx: apply the introduced usbnet_{read|write}_cmd_nopmMing Lei2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch applies the introduced usbnet_read_cmd_nopm() and usbnet_write_cmd_nopm() in the callback of resume and suspend to avoid deadlock if USB runtime PM is considered into usbnet_read_cmd() and usbnet_write_cmd(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | usbnet: smsc95xx: fix memory leak in smsc95xx_suspendMing Lei2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes memory leak in smsc95xx_suspend. Also, it isn't necessary to bother mm to allocate 8bytes/16byte, and we can use stack variable safely. Acked-By: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | usbnet: smsc75xx: apply the introduced usbnet_{read|write}_cmd_nopmMing Lei2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch applies the introduced usbnet_read_cmd_nopm() and usbnet_write_cmd_nopm() in the callback of resume and suspend to avoid deadlock if USB runtime PM is considered into usbnet_read_cmd() and usbnet_write_cmd(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | usbnet: introduce usbnet_{read|write}_cmd_nopmMing Lei2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the below two helpers to prepare for solving the usbnet runtime PM problem, which may cause some network utilities (ifconfig, ethtool,...) touch a suspended device. usbnet_read_cmd_nopm() usbnet_write_cmd_nopm() The above two helpers should be called by usbnet resume/suspend callback to avoid deadlock. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | smsc75xx: add wol support for more frame typesSteve Glendinning2012-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for wol wakeup on unicast, broadcast, multicast and arp frames. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-07-23 10:59:52 -0400