aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/r8169.c
Commit message (Collapse)AuthorAge
* r8169: fix Ethernet Hangup for RTL8110SC rev dSimon Wunderlich2009-10-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt <bernhard.schmidt@saxnet.de> Signed-off-by: Simon Wunderlich <simon.wunderlich@saxnet.de> Acked-by: Francois Romieu <romieu@zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: partial support and phy init for the 8168dfrançois romieu2009-10-13
| | | | | | | | | Extracted from Realtek's 8.012.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: Fix warning in rtl8169_start_xmit().David S. Miller2009-09-07
| | | | | | | | | | | | Reported by Stephen Rothwell: drivers/net/r8169.c: In function 'rtl8169_start_xmit': drivers/net/r8169.c:3421: warning: label 'out' defined but not used Introduced by commit 61357325f377889a1daffa14962d705dc814dd0e ("netdev: convert bulk of drivers to netdev_tx_t"). Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: Remove redundant checks for CAP_NET_ADMIN in MDIO implementationsBen Hutchings2009-09-03
| | | | | | | | dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the driver's implementation of MDIO ioctls. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger2009-09-01
| | | | | | | | | | | | In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: phy init for the 8102efrançois romieu2009-08-13
| | | | | | | | Synced with Realtek's 1.013.00 r8101 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: phy init for the 8169sfrançois romieu2009-08-13
| | | | | | | | Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: phy init for the 8169scdfrançois romieu2009-08-13
| | | | | | | | Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: phy init for the 8169scefrançois romieu2009-08-13
| | | | | | | | Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: differentiate close chipsets in the startup identification messagefrançois romieu2009-08-13
| | | | | | | | | | The driver displays the same 0x18000000 xid for RTL_GIGA_MAC_VER_06 and RTL_GIGA_MAC_VER_05 whereas the former ought to be identified as 0x98000000. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: fix r8101 quirk dupefrançois romieu2009-08-13
| | | | | | | | Noticed by Vincent Pelletier <plr.vincent@gmail.com>. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: WakeOnLan fix for the 8168françois romieu2009-07-26
| | | | | | | | | | | | | | | | More stuff for http://bugzilla.kernel.org/show_bug.cgi?id=9512 Some 8168 are unable to WoL when receiving is not enabled (plain old 8169 do not seem to care). It is not exactly pretty to leave the receiver enabled but we should now enable DMA late enough for it to be safe. Some late stage boot failure due to pxe and friends may benefit from the delayed enabling of bus-mastering as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Jaromír Cápík <tavvva@volny.cz> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: remove unused variableFlorian Westphal2009-06-19
| | | | | | | | all references got removed by 865c652d6be9929927cabdc54b137b7541eb6612 (r8169: remove non-napi code). Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: do not bring device down when suspendingfrançois romieu2009-06-17
| | | | | | | | | | | | | | | | Stopping all activity through ChipCmd and blindly acking the irqs is neither nice nor completely needed: the transition to low-power mode does enough work and it apparently keeps the device in a sane state. Patch suggested by a fix for http://bugzilla.kernel.org/show_bug.cgi?id=9512 The rtl_shutdown path is kept unchanged so far. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Anders Eriksson <aeriksson@fastmail.fm> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-06-15
|\ | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
| * r8169: fix crash when large packets are receivedEric Dumazet2009-06-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Michael Tokarev reported receiving a large packet could crash a machine with RTL8169 NIC. ( original thread at http://lkml.org/lkml/2009/6/8/192 ) Problem is this driver tells that NIC frames up to 16383 bytes can be received but provides skb to rx ring allocated with smaller sizes (1536 bytes in case standard 1500 bytes MTU is used) When a frame larger than what was allocated by driver is received, dma transfert can occurs past the end of buffer and corrupt kernel memory. Fix is to tell to NIC what is the maximum size a frame can be. This bug is very old, (before git introduction, linux-2.6.10), and should be backported to stable versions. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: use dev_kfree_skb() instead of dev_kfree_skb_irq()Eric Dumazet2009-06-11
| | | | | | | | | | | | | | | | | | rtl8169_tx_interrupt() is used from NAPI context, it can directly free skbs. dev_kfree_skb_irq() is a leftover from pre-NAPI times of this driver. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2009-06-03
|\| | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/forcedeth.c
| * r8169: avoid losing MSI interruptsDavid Dillow2009-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: David Dillow <dave@thedillows.org> Tested-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dont update dev->trans_startEric Dumazet2009-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: Use a different default for each familyJean Delvare2009-05-26
| | | | | | | | | | | | | | | | | | | | | | | | The r8169 driver supports 3 different families of network chips (RTL8169, RTL8168 and RTL8101). When an unknown version is found, the driver currently always defaults to the RTL8169 variant. This has very little chance to ever work for chips of the other families. So better define a per-family default. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: allow true forced mode settingfrançois romieu2009-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to mostly historic reasons, including a lack of reliability of the link handling (especially with the older 8169), the current r8169 driver emulates forced mode setting by limiting the advertised modes. With this change the driver allows real 10/100 forced mode settings on the 8169 and 8101/8102. Original idea by Vincent Steenhoute. The RTL_GIGA_MAC_VER_03 tweak was extracted from Realtek's r8169 v6.010.00 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Jean Delvare <jdelvare@suse.de> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: remove useless struct memberfrançois romieu2009-05-19
| | | | | | | | | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* | NET/r8169: Rework suspend and resumeRafael J. Wysocki2009-04-13
|/ | | | | | | | | | | | | | | | | | | | | | | The recent changes of the PCI PM core allow us to simplify the suspend and resume handling in a number of device drivers, since they don't need to carry out the general PCI PM operations, such as changing the power state of the device, during suspend and resume any more. Simplify the suspend and resume callbacks of r8169 using the observation that the PCI PM core can take care of some operations carried out by the driver. Additionally, make the shutdown callback of r8169 only put the device into a low power state if the system is going to be powered off (kexec is known to have problems with network adapters that are put into low power states on shutdown). This patch has been tested on MSI Wind U100. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-07
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang2009-04-07
| | | | | | | | Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* r8169: reset IntrStatus after chip resetKarsten Wiese2009-04-02
| | | | | | | | | | | | | | | | | | | | | Original comment (Karsten): On a MSI MS-6702E mainboard, when in rtl8169_init_one() for the first time after BIOS has run, IntrStatus reads 5 after chip has been reset. IntrStatus should equal 0 there, so patch changes IntrStatus reset to happen after chip reset instead of before. Remark (Francois): Assuming that the loglevel of the driver is increased above NETIF_MSG_INTR, the bug reveals itself with a typical "interrupt 0025 in poll" message at startup. In retrospect, the message should had been read as an hint of an unexpected hardware state several months ago :o( Fixes (at least part of) https://bugzilla.redhat.com/show_bug.cgi?id=460747 Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Josep <josep.puigdemont@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-03-17
|\ | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/igb/igb_main.c drivers/net/qlge/qlge_main.c drivers/net/wireless/ath9k/ath9k.h drivers/net/wireless/ath9k/core.h drivers/net/wireless/ath9k/hw.c
| * r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"françois romieu2009-03-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It fails on the following systems: - RTL8169sc/8110sc (XID 18000000) reported by Tim Durack <tdurack@gmail.com> (x86) - RTL8169sb/8110sb (XID 10000000) reported by Mikael Pettersson <mikpe@it.uu.se> (ARM) The patch appeared to work on x86 for the following systems: RTL8169sb/8110sb 10000000 PCI (EXT) RTL8110s 04000000 PCI (EXT) RTL8102e 24a00000 PCI-E (LOM) RTL8168c/8111c 3c2000c0 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (EXT) The patch exposes two problems: 1) while not completely wrong, mac addresses are not read correctly from the EEPROM 2) the MAC address registers are not correctly set Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: use hardware auto-padding.françois romieu2009-03-15
| | | | | | | | | | | | | | | | It shortens the code and fixes the current pci_unmap leak with padded skb reported by Dave Jones. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2009-03-02
|\| | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c net/8021q/vlan_core.c net/core/dev.c
| * r8169: read MAC address from EEPROM on init (2nd attempt)Ivan Vecera2009-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is 2nd attempt to implement the initialization/reading of MAC address from EEPROM. The first used PCI's VPD and there were some problems, some devices are not able to read EEPROM content by VPD. The 2nd one uses direct access to EEPROM through bit-banging interface and my testing results seem to be much better. I tested 5 systems each with different Realtek NICs and I didn't find any problem. AFAIK Francois's NICs also works fine. Original description: This fixes the problem when MAC address is set by ifconfig or by ip link commands and this address is stored in the device after reboot. The power-off is needed to get right MAC address. This is problem when Xen daemon is running because it renames the device name from ethX to pethX and sets its MAC address to FE:FF:FF:FF:FF:FF. After reboot the device is still using FE:FF:FF:FF:FF:FF. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2009-02-07
|\| | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
| * r8169: Don't update statistics counters when interface is downIvan Vecera2009-02-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Realtek chips (RTL8169sb/8110sb in my case) are unable to retrieve ethtool statistics when the interface is down. The process stays in endless loop in rtl8169_get_ethtool_stats. This is because these chips need to have receiver enabled (CmdRxEnb bit in ChipCmd register) that is cleared when the interface is going down. It's better to update statistics only when the interface is up and otherwise return copy of statistics grabbed when the interface was up (in rtl8169_close). It is interesting that PCI-E NICs (like 8168b/8111b...) are not affected. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Remove redundant NAPI functionsBen Hutchings2009-01-21
|/ | | | | | | | | | | Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unused netdev arg from some NAPI interfaces.Neil Horman2008-12-22
| | | | | | | | | | When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: add more functions to netdevice opsStephen Hemminger2008-11-20
| | | | | | | | | | | | This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: convert to net_device_opsFrancois Romieu2008-11-20
| | | | | | Based upon a patch by Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-04
| | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: revert "read MAC address from EEPROM on init"Francois Romieu2008-10-26
| | | | | | | | | | | | | | | | This reverts commit 7bf6bf4803df1adc927f585168d2135fb019c698. The code has both a short existence and an increasing track of failures despite some work to amend it for -rc1. It is not just a matter of reading the eeprom: sometimes the eeprom is read correctly, then the mac address is not written correctly back into the mac registers. Some chipsets seem to work reliably but it is not clear at this point if the code can simply be made to work on a per-chipset basis and post -rc1 is not the place where I want to experiment these things. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* r8169: checks against wrong mac addresse initFrancois Romieu2008-10-22
| | | | | | | | | | | | | Checking the signature of the eeprom and the validity of the MAC address should be enough to filter out the bad addresses observed so far. Contributed by Ivan Vecera and Martin Capitanio. Tested on 8102el, 8168b and 8169 for a start. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: verbose mac address initFrancois Romieu2008-10-22
| | | | | | | | I prefer the debug information to be displayed until the issue is properly handled. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: NULL pointer dereference on r8169 loadPetr Vandrovec2008-10-12
| | | | | | | | | | mmio_addr in r8169 needs to be initialized before use Maybe that all tp-> initialization should be moved before rtl_init_mac_address call, but this is enough to get rid of crash in rtl_rar_set due to mmio_addr being uninitialized. Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: add shutdown handlerFrancois Romieu2008-10-10
| | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: preliminary 8168d supportFrancois Romieu2008-10-10
| | | | | | | | Taken from Realtek's 8.007.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ivan Vecera <ivecera@redhat.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: support additional 8168cp chipsetFrancois Romieu2008-10-10
| | | | | | | | Taken from Realtek's 8.007.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ivan Vecera <ivecera@redhat.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: change default behavior for mildly identified 8168c chipsetsFrancois Romieu2008-10-10
| | | | | | | | | | | | The addition of a new device has so far implied a specialization of these masks. While they identify 8168c devices, they can be expected to be further refined as they have been by Realtek so far. The change should bring the driver closer to the version 8.006.00 of Realtek's 8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: add a new 8168cp flavorFrancois Romieu2008-10-10
| | | | | | | | | Taken from Realtek's 8.006.00 r8168 driver. I have left some bits related to jumbo frame aside for now. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: add a new 8168c flavor (bis)Francois Romieu2008-10-10
| | | | | | | | | Taken from Realtek's 8.006.00 r8168 driver. I have left some bits related to jumbo frame aside for now. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* r8169: add a new 8168c flavorFrancois Romieu2008-10-10
| | | | | | | Taken from Realtek's 8.006.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-16 04:50:48 -0500