aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/netxen
Commit message (Collapse)AuthorAge
* netxen: fix crashes during module unloaddhananjay@netxen.com2007-08-31
| | | | | | | | | | | This patch fixes two problems during driver unload. The pci_disable_device() call is before firmware reload, causing reads and writes across PCI bus after disabling device. Second problem is the register window was wrong during firmware reload Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen: Avoid firmware load in PCI probedhananjay@netxen.com2007-08-31
| | | | | | | | | | | Loading firmware during PCI probe can lead to incorrect initialization, rendering the card unusable until next reboot. This was introduced a while ago as a workaround for firmware bug, a better workaround was submitted for this a while ago. So removing original hack that loads firmware during probe. Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: ethtool_perm_addr only has one implementationMatthew Wilcox2007-07-31
| | | | | | | | | All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: drop redudant spinlockDhananjay Phadke2007-07-30
| | | | | | | | | | Some leftover code that makes use of adapter->lock in tx_timeout function, which resets the interface under this lock. In close() when the workqueue is flushed, prints the warning about sleeping with interrupts disabled (when spinlock debug is enabled). The lock was required with private netxen IOCTLs, which were removed a while ago. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen: Fix interrupt handling for multiport adaptersdhananjay@netxen.com2007-07-30
| | | | | | | | | This patch fixes masking of interrupts on multiport adapters. Also disables interrupts upon ifdown interface. The wrong mask could result in interrupt flood after interface is down. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen: re-init station address after h/w initdhananjay@netxen.com2007-07-30
| | | | | | | | | This is a workaround for firmware bug with 2nd port of multiport adapter, where MAC address is reset. Driver just needs to overwrite it with the value read from PROM. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen: Load firmware during probe, dma watchdog fix.dhananjay@netxen.com2007-07-24
| | | | | | | | | | | | | The firmware should be loaded after resetting hardware during PCI probe, besides module unload. This fixes issue with 2nd port of multiport adapter on powerpc blades. This patch also fixes a bug that PCI resources are not freed if dma watchdog shutdown failed. The dma watchdog poll messages during module unload are also suppressed. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* PCI: Change all drivers to use pci_device->revisionAuke Kok2007-07-11
| | | | | | | | | | | | | | | | | | | | Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* netxen: deinline and sparse fixStephen Hemminger2007-07-10
| | | | | | | | | | | Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/net: fix comparisons of unsigned < 0Bill Nottingham2007-07-08
| | | | | | | Recent gcc versions emit warnings when unsigned variables are compared < 0 or >= 0. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon ↵Dhananjay Phadke2007-07-02
| | | | | | | | | | | | | | | module unload Resending patch 3/3 only. These changes allow driver close routine to be called during module unload, to clean-up buffers and other software resources, flush queues etc. Also, hardware is reset to pristine state. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registersdhananjay.phadke@gmail.com2007-07-02
| | | | | | | | | | | | This patch updates the various access routines to access different control and status settings present in different register locations. This will fix problems related to working of different ports in multi Port card. Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off by: Milan Bag <mbag@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctlydhananjay.phadke@gmail.com2007-07-02
| | | | | | | | | | | NetXen driver uses PCI function 0 to provide the functionality of MSI. The patch makes driver check the bus master bit for function 0 and enable it after the card initialization. Signed-off-by: Dhananjay Phadke<dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix link status messagesMithlesh Thukral2007-06-12
| | | | | | | | | | | | | NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix compile failure seen on PPC architectureMithlesh Thukral2007-06-09
| | | | | | | | | | | | | | NetXen: Add NETXEN prefixes to macros to clean them up. This is a cleanup patch which adds NETXEN prefix to some stand alone macro names. These posed compile errors when NetXen driver was backported to 2.6.9 on PPC architecture as macros like USER_START are defined in file arch/ppc64/mm/hash_utils.c Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Acked-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix ping issue after reboot on Blades with 3.4.19 firmwareMithlesh Thukral2007-06-09
| | | | | | | | | | | | | | | | | | NetXen: Fix initialization and subsequent ping issue on 3.4.19 firmware This patch fixes the ping problem seen X/PBlades after the adapter's firmware was moved to 3.4.19. After configured interface up, ping failed. NetXen adapter couldn't accept ARP broadcast packet. Manual addition of MAC address in the ARP table, made ping work. NetXen adapter should finish initilization after system boot. But looks NetXen adapter didn't initilization correctly after system boot up. So have to re-load the firmware again in probe routine. Also re-initilization netxen_config_0 and netxen_config_1 registers. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Removal of extra free_irq callMithlesh Thukral2007-06-03
| | | | | | | | | | NetXen: Removal of redundant free_irq This patch removes a redundant free_irq() call from remove() routine. This will also eliminate a warning during unload of driver. Signed-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix NetXen driver ping on system-pMithlesh Thukral2007-05-17
| | | | | | | | | | | NetXen: Fix for driver on System-p This patch will fix a ping issue on system-p Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Adhiraj Joshi <adhiraj@netxen.com> Signed-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen_nic_main don't use deprecated irq flagsAndrew Morton2007-05-11
| | | | | | | | | | drivers/net/netxen/netxen_nic_main.c: In function 'netxen_nic_open': drivers/net/netxen/netxen_nic_main.c:738: warning: 'deprecated_irq_flag' is deprecated (declared at include/linux/interrupt.h:66) drivers/net/netxen/netxen_nic_main.c:738: warning: 'deprecated_irq_flag' is deprecated (declared at include/linux/interrupt.h:66) Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix for vmalloc issuesMithlesh Thukral2007-04-28
| | | | | | | | | NetXen: Fix vmalloc errors on seen on some X86 high end machines. Signed-off by: Milan Bag <mbag@netxen.com> Acked-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fixes for Power PC architectureMithlesh Thukral2007-04-28
| | | | | | | | | | NetXen: Fix PPC architecture specific bugs Fixes some issues seen on Big endian machines. Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Port swap feature for multi port cardsMithlesh Thukral2007-04-28
| | | | | | | | | | | | NetXen: Port Swap feature This patch will allow a port numbers on the card to be swapped in host driver. This feature is applicable to cards having more than 1 port. Signed-off by: Milan Bag <mbag@netxen.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Removal of redundant macrosMithlesh Thukral2007-04-28
| | | | | | | | NetXen: Remove 2 redundant macro definitions from header file. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Multi PCI support for Quad cardsMithlesh Thukral2007-04-28
| | | | | | | | | | NetXen: Fix the multi PCI function for cards with more than 2 ports. This patch fixes the working of multi PCI capable driver on cards with more than 2 ports by adding the addresses for their rings and sizes. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Removal of redundant argument passingMithlesh Thukral2007-04-28
| | | | | | | | | NetXen: Removal of redundant function call parameters and bug fixes. This patch will remove the redundant paramters which were being passed to many functions since now adapter->portnum can be used. Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Use multiple PCI functionsMithlesh Thukral2007-04-28
| | | | | | | | | | | | NetXen: Make driver use multiple PCI functions. This patch will make NetXen driver work with multiple PCI functions. This will make the usage of memory resources as well as interrupts more independent among different functions which results in better throughput. This change has been done after the multiport support is added in firmware. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo2007-04-26
| | | | | | | To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* [TCP]: Introduce tcp_hdrlen() and tcp_optlen()Arnaldo Carvalho de Melo2007-04-26
| | | | | | | | | | | | The ip_hdrlen() buddy, created to reduce the number of skb->h.th-> uses and to avoid the longer, open coded equivalent. Ditched a no-op in bnx2 in the process. I wonder if we should have a BUG_ON(skb->h.th->doff < 5) in tcp_optlen()... Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_transport_offset()Arnaldo Carvalho de Melo2007-04-26
| | | | | | | For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo2007-04-26
| | | | | Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IP]: Introduce ip_hdrlen()Arnaldo Carvalho de Melo2007-04-26
| | | | | | | | | | | | | | | | For the common sequence "skb->nh.iph->ihl * 4", removing a good number of open coded skb->nh.iph uses, now to go after the rest... Just out of curiosity, here are the idioms found to get the same result: skb->nh.iph->ihl << 2 skb->nh.iph->ihl<<2 skb->nh.iph->ihl * 4 skb->nh.iph->ihl*4 (skb->nh.iph)->ihl * sizeof(u32) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_network_offset()Arnaldo Carvalho de Melo2007-04-26
| | | | | | | For the quite common 'skb->nh.raw - skb->data' sequence. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo2007-04-26
| | | | | | | One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* NetXen: Fix hardware access for ppc architecture.Linsys Contractor Adhiraj Joshi2007-03-29
| | | | | | | NetXen: Fix for hardware access on big endian machine. Signed-off-by: Adhiraj Joshi <adhiraj@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix softlockup seen during hardware accessLinsys Contractor Mithlesh Thukral2007-03-15
| | | | | | | | | | NetXen: This will fix a softlock seen on some machines. The reason was too much time was spent waiting for hardware access to go through. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Bug fix for Jumbo frames on XG cardLinsys Contractor Mithlesh Thukral2007-03-15
| | | | | | | | | NetXen: Set the MTU for the right port depending upon the port number for XG cards. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen: fix warningsRalf Baechle2007-03-09
| | | | | | | | | | | | | CC [M] drivers/net/netxen/netxen_nic_hw.o drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_hw_resources': drivers/net/netxen/netxen_nic_hw.c:231: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t' drivers/net/netxen/netxen_nic_hw.c:250: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t' u64 is unsigned long so the cast to u64 will result in a warning on the printf arguments for 64-bit builds. So cast to unsigned long long instead. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix second rmmod failure observed on PowerPC machines.Linsys Contractor Mithlesh Thukral2007-03-02
| | | | | | Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Updates, removal of unsupported features and minor bug fixes.Linsys Contractor Mithlesh Thukral2007-03-02
| | | | | Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen: do_rom_fast_write error handlingStephen Hemminger2007-02-27
| | | | | | | | | | | Compiler warning spots real error! The function do_rom_fast_read called in do_rom_fast_write can fail and leave data1 unset. This causes a compile warning. The correct thing is to propagate the error out. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Driver ifconfig fixAmit S. Kale2007-02-27
| | | | | Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Driver unload fixesAmit S. Kale2007-02-27
| | | | | Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Fix to get the driver working after sparse changesAmit S. Kale2007-02-17
| | | | | Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'master' into upstreamJeff Garzik2007-02-17
|\
| * [PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | NetXen: Updates for ethtool supportAmit S. Kale2007-02-09
| | | | | | | | | | | | | | NetXen: Updates for ethtool support. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | NetXen: Fixes for ppc architecture.Amit S. Kale2007-02-09
|/ | | | | | | NetXen: Fixes for ppc architecture. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Added ethtool support for user level tools.Amit S. Kale2007-02-06
| | | | | | | NetXen: Added ethtool support for user level firmware management utilities. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NetXen: Firmware crb init changes.Amit S. Kale2007-02-06
| | | | | | | NetXen: firmware crb init changes. Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen patchesAl Viro2007-01-31
| | | | | | | | | | | | Have fun. >From 24f4a1a77431575a9cdfaae25adda85842099f70 Mon Sep 17 00:00:00 2001 From: Al Viro <viro@zeniv.linux.org.uk> Date: Mon, 1 Jan 2007 15:22:56 -0500 Subject: [PATCH] netxen trivial annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-15 23:48:29 -0500