aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe
Commit message (Collapse)AuthorAge
* ixgbe,rcu: convert call_rcu(ring_free_rcu) to kfree_rcu()Lai Jiangshan2011-05-08
| | | | | | | | | | The rcu callback ring_free_rcu() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(ring_free_rcu). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
* Fix common misspellingsLucas De Marchi2011-03-31
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* ixgbe: DCB, PFC not cleared until reset occursJohn Fastabend2011-03-12
| | | | | | | | | | | | | | | The PFC configuration is not cleared until the device is reset. This has not been a problem because setting DCB attributes forced a hardware reset. Now that we no longer require this reset to occur PFC remains configured even after being disabled until the device is reset. This removes a goto in the PFC hardware set routines for 82598 and 82599 devices that was short circuiting the clear. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add support for VF Transmit rate limit using iproute2Lior Levy2011-03-12
| | | | | | | | | | | | | | | | | | | | | | | Implemented ixgbe_ndo_set_vf_bw function which is being used by iproute2 tool. In addition, updated ixgbe_ndo_get_vf_config function to show the actual rate limit to the user. The rate limitation can be configured only when the link is up and the link speed is 10Gb. The rate limit value can be 0 or ranged between 11 and actual link speed measured in Mbps. A value of '0' disables the rate limit for this specific VF. iproute2 usage will be 'ip link set ethX vf Y rate Z'. After the command is made, the rate will be changed instantly. To view the current rate limit, use 'ip link show ethX'. The rates will be zeroed only upon driver reload or a link speed change. This feature is being supported by 82599 and X540 devices. Signed-off-by: Lior Levy <lior.levy@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB, set minimum bandwidth per traffic classJohn Fastabend2011-03-12
| | | | | | | | | | | | DCB provides a guaranteed bandwidth in the case with 0% bandwidth then no bandwidth is guaranteed. However the traffic class should still be able to transmit traffic. For this to work the traffic class must be given the minimum credits required to send a frame. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: update PHY code to support 100Mbps as well as 1G/10GEmil Tantilov2011-03-12
| | | | | | | | | This change updates the PHY setup code to support 100Mbps capable PHYs as well as 10G and 1Gbps. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: remove timer reset to 0 on timeoutEmil Tantilov2011-03-12
| | | | | | | | | | | | | The VF mailbox polling for acks and messages would reset the timer to zero on a timeout. Under heavy load a timeout may actually occur without being the result of an error and when this occurs it is not practical to perform a full VF driver reset on every message timeout. Instead, just return an error (which is already done) and the VF driver will have an opportunity to retry the operation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB during ifup use correct CEE or IEEE modeJohn Fastabend2011-03-12
| | | | | | | | | | | | | | DCB settings are cleared in the hardware across link events during ifup ixgbe reprograms the hardware for DCB if it is enabled. Now that we have two modes CEE or IEEE we need to use the correct set of configuration data. This patch checks the dcbx_cap bits and then enables the device in the correct mode. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: IEEE 802.1Qaz, implement priority assignment tableJohn Fastabend2011-03-12
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to use the priority assignment table in the ieee_ets structure to map priorities to traffic classes. Previously ixgbe only supported a 1:1 mapping. Now we can enable and disable hardware DCB support when multiple traffic classes are actually being used. This allows the default case all priorities mapped to traffic class 0 to work in normal hardware mode and utilize the full packet buffer. This patch does not address putting the hardware in 4TC mode so packet buffer space may be underutilized in this case. A follow up patch can address this optimization. But at least we have the hooks to do this now. Also CEE will behave as it always has and map priorities 1:1 with traffic classes. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB, missed translation from 8021Qaz TSA to CEE link strictJohn Fastabend2011-03-12
| | | | | | | | | | | | | | | | | | | | | The patch below allowed IEEE 802.1Qaz and CEE DCB hardware configurations to use common hardware set routines, commit 88eb696cc6a7af8f9272266965b1a4dd7d6a931b Author: John Fastabend <john.r.fastabend@intel.com> Date: Thu Feb 10 03:02:11 2011 -0800 ixgbe: DCB, abstract out dcb_config from DCB hardware configuration However the case when CEE link strict and group strict are set was missed and are currently being mapped incorrectly in some configurations. This patch resolves this. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB: enable RSS to be used with DCBJohn Fastabend2011-03-12
| | | | | | | | | | | | RSS had previously been disabled when DCB was enabled because DCB was single queued per traffic class. Now that DCB implements multiple Tx/Rx rings per traffic class enable RSS. Here RSS hashes across the queues in the traffic class. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain.@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: enable ndo_tc_setupJohn Fastabend2011-03-12
| | | | | | | | | This patch adds the ndo_tc_setup to ixgbe. By default we set the device to use strict priority. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain.@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB, use multiple Tx rings per traffic classJohn Fastabend2011-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables multiple {Tx|Rx} rings per traffic class while in DCB mode. In order to get this working as expected the tc_to_tx net device mapping is configured as well as the prio_tc_map. skb priorities are mapped across a range of queue pairs to get a distribution per traffic class. The maximum number of queue pairs used while in DCB mode is capped at 64. The hardware max is actually 128 queues but 64 is sufficient for now and allocating more seemed a bit excessive. It is easy enough to increase the cap later if need be. To get the 802.1Q priority tags inserted correctly ixgbe was previously using the skb queue_mapping field to directly set the 802.1Q priority. This no longer works because we have removed the 1:1 mapping between queues and traffic class. Each ring is aligned with an 802.1Qaz traffic class so here we add an extra field to the ring struct to identify the 802.1Q traffic class. This uses an extra byte of the ixgbe_ring struct fortunately there was a 2byte hole, struct ixgbe_ring { void * desc; /* 0 8 */ struct device * dev; /* 8 8 */ struct net_device * netdev; /* 16 8 */ union { struct ixgbe_tx_buffer * tx_buffer_info; /* 8 */ struct ixgbe_rx_buffer * rx_buffer_info; /* 8 */ }; /* 24 8 */ long unsigned int state; /* 32 8 */ u8 atr_sample_rate; /* 40 1 */ u8 atr_count; /* 41 1 */ u16 count; /* 42 2 */ u16 rx_buf_len; /* 44 2 */ u16 next_to_use; /* 46 2 */ u16 next_to_clean; /* 48 2 */ u8 queue_index; /* 50 1 */ u8 reg_idx; /* 51 1 */ u16 work_limit; /* 52 2 */ /* XXX 2 bytes hole, try to pack */ u8 * tail; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ Now we can set the VLAN priority directly and it will be correct. User space can indicate the 802.1Qaz priority using the SO_PRIORITY setsocket() option and QOS layer will steer the skb to the correct rings. Additionally using the multiq qdisc with a queue_mapping action works as well. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB remove ixgbe_fcoe_getapp routineJohn Fastabend2011-03-12
| | | | | | | | | | | Remove ixgbe_fcoe_getapp() and use the generic kernel routine instead. Also add application priority to the kernel maintained list on setapp so applications and stacks can query the value. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB, implement ieee_setapp dcbnl opsJohn Fastabend2011-03-12
| | | | | | | | | | | Implement ieee_setapp dcbnl ops in ixgbe. This is required to setup FCoE which requires dedicated resources. If the app data is not for FCoE then no action is taken in ixgbe except to add it to the dcb_app_list. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: DCB, implement capabilities flagsJohn Fastabend2011-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements dcbnl get and set capabilities ops. The devices supported by ixgbe can be configured to run in IEEE or CEE modes but not both. With the DCBX set capabilities bit we add an explicit signal that must be used to toggle between these modes. This patch adds logic to fail the CEE command set_hw_all() which programs the device with a CEE configuration if the CEE caps bit is not set. Similarly, IEEE set commands will fail if the IEEE caps bit is not set. We allow most CEE config set commands to occur because they do not touch the hardware until set_hw_all() is called. The one exception to the above is the {set|get}app routines. These must always be protected by caps bits to ensure side effects do not corrupt the current configured mode. By requiring the caps bit to be set correctly we can maintain a consistent configuration in the hardware for CEE or IEEE modes and prevent partial hardware configurations that may occur if user space does not send a complete IEEE or CEE configurations. It is expected that user space will signal a DCBX mode before programming device. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix compile failure in ixgbe_init_mbx_params_pfAndy Gospodarek2011-03-08
| | | | | | | | | | | | | | | | This commit: commit d7c8a29fc8bd20ba45ec2f52577ed04a988a9500 Author: Emil Tantilov <emil.s.tantilov@intel.com> Date: Thu Mar 3 09:25:02 2011 +0000 ixgbe: improve logic in ixgbe_init_mbx_params_pf incorrectly added a line that accessed mbx->udelay. I'm sure the intent was mbx->usec_delay. This patch fixes the compilation error. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: fix setting and reporting of advertised speedsEmil Tantilov2011-03-07
| | | | | | | | | Add the ability to set 100/F on x540. Fix reporting of advertised modes by adding check for phy.autoneg_advertised Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix spelling errorsEmil Tantilov2011-03-07
| | | | | | Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: improve logic in ixgbe_init_mbx_params_pfEmil Tantilov2011-03-07
| | | | | | | | Use if/then instead of an all-inclusive case statement. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add function descriptionEmil Tantilov2011-03-07
| | | | | | | | Add description for ixgbe_init_eeprom_params_X540 and whitespace fix. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Enable flow control pause parameter auto-negotiation supportEmil Tantilov2011-03-07
| | | | | | | | | | This patch enables flow control pause parameters auto-negotiation support to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics modules at 1G speed Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add x540 statistic counter definitionsEmil Tantilov2011-03-07
| | | | | | | | | Add defines to accumulate and display x540 PHY statistic counters on transmit/receive. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: clear correct counters for flow control on 82599Emil Tantilov2011-03-07
| | | | | | | | The 82599 was not correctly having some of it's counters cleared for flow control. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup PHY initEmil Tantilov2011-03-07
| | | | | | | | | | This change cleans up several situations in which we were either stepping over possible errors, or calling initialization routines multiple times. Also includes whitespace fixes where applicable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add support to FCoE DDP in target modeYi Zou2011-03-07
| | | | | | | | | | Add support to the ndo_fcoe_ddp_target() to allow the Intel 82599 device to also provide DDP offload capability when the upper FCoE protocol stack is operating as a target. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix missing function pointer conversionDon Skidmore2011-03-07
| | | | | | | | | | | | | | In the previous commit: commit 5e655105e3e19d746f9e95c514b014c11c3d1b6a Author: Don Skidmore <donald.c.skidmore@intel.com> Date: Fri Feb 25 01:58:04 2011 +0000 ixgbe: add function pointer for semaphore function there was one release of the semaphore function call which did not get converted to a function pointer. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup copyright string for 2011Don Skidmore2011-03-03
| | | | | | | | | Updating the copyrights for 2011 as well as make the ixgbe_copyright string a constant. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add function pointer for semaphore functionDon Skidmore2011-03-03
| | | | | | | | | | | | The X540 devices grabs semaphores differently than 82599 and 82598 devices do. They do however also grab them in allot of the same functions. So I'm adding a new MAC operation function pointer to allow us to use the correct function based on our MAC type. I'm also changing all the semaphore calls to use this new function pointer. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: X540 CleanupGreg Rose2011-03-03
| | | | | | | | Clean up commented out include file and use #define instead of hard coded value for number of RAR entries. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup handling of I2C interface to PHYEmil Tantilov2011-03-03
| | | | | | | | | | The I2C interface was not being correctly locked down per port. As such this can lead to race conditions that can cause issues. This patch cleans up the handling to make certain we are not experiencing racy I2C access. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: store permanent address before initializing Rx addressesEmil Tantilov2011-03-03
| | | | | | | | | | We were reading the address after it had been initialized and this results in the permanent address on the system being changed. This change corrects that by storing the address before we re-initialize it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Numerous whitespace / formatting cleanupsEmil Tantilov2011-03-03
| | | | | | | | This patch contains a number of whitespace and formatting cleanups. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Specific check for 100 Full link speedEmil Tantilov2011-03-03
| | | | | | | | | This patch specifically checks for 100 Full link speed instead of assuming we are linked at 100 if not linked at 10G and 1G. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Drop unused code for setting up unicast addressesEmil Tantilov2011-03-03
| | | | | | | | This change removes the unused code that was setting up the uc_addr_list. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: rework ixgbe MTA handling to not drop packetsEmil Tantilov2011-03-03
| | | | | | | | | | | | | This change modifies the ixgbe drivers so that it will not drop the multicast filters while updating them. Instead it uses an intermediate table to store the filter and then writes that filter to the hardware. Based on original patch from Dave Boutcher <daveboutcher@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reported-by: Dave Boutcher <daveboutcher@gmail.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup X540 PHY reset function pointerDon Skidmore2011-03-03
| | | | | | | | | | | | The X540 PHY reset pointer isn't currently used which is a good thing as it wouldn't work as implemented. On top of that the X540 firmware is written with the assumption that is does not need to be reset for proper initialization so it's not needed. I'm just assigning the pointer at NULL as the current implementation is rather misleading. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Bounds checking for set_rar, clear_rar, set_vmdq, clear_vmdqEmil Tantilov2011-03-03
| | | | | | | | | This change makes it so that out of bounds requests to these calls will now return IXGBE_ERR_INVALID_ARGUMENT instead of returning 0. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Fill out PCIe speed and width enums with valuesEmil Tantilov2011-03-03
| | | | | | | | | This patch fills in the values for bus speed and width of the ixgbe_bus_speed and ixgbe_bus_width enums. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add polling test to end of PHY resetEmil Tantilov2011-03-03
| | | | | | | | | | Some PHYs require that we poll the reset bit and wait for it to clear before continuing initialization. As such we should add this check to the end of the ixgbe_reset_phy_generic routine. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Check link wants report current link stateEmil Tantilov2011-03-03
| | | | | | | | | | | | | Currently check link reports the link state as down, if at any time the link had previously gone down since the last time the LINKS register was read. This does not accurately reflect the function of the check link call, which should be to return the CURRENT link state. Code now reads the LINKS registers twice, once to clear the previous and again to get the current value. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup code in ixgbe_identify_sfp_module_genericEmil Tantilov2011-03-03
| | | | | | | | | | This change cleans up several issues in ixgbe_identify_sfp_module_generic including whitespace, redundant code, I2C EEPROM reads without exception handling, and an if/elseif/else without braces. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Add ability to double reset on failure to clear master enableEmil Tantilov2011-03-03
| | | | | | | | | | | | Double resets are required for recovery from certain error conditions. Between resets, it is necessary to stall to allow time for any pending HW events to complete. We use 1usec since that is what is needed for ixgbe_disable_pcie_master(). The second reset then clears out any effects of those events. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: set media type for 82599 T3 LOMEmil Tantilov2011-03-03
| | | | | | | | | The media type was not being set for the 82599 T3 LAN on motherboard. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: balance free_irq calls with request_irq callsAlexander Duyck2011-03-03
| | | | | | | | | | | We were incorrectly freeing IRQs that we had not requested. This change corrects that by making certain we only free q_vectors that we have requested IRQs for. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup logic related to HW semaphoresEmil Tantilov2011-03-03
| | | | | | | | | | This change cleans up much of the logic related to the hardware semaphores on the adapters. There were a number of issues with timings that needed to be addressed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: cleanup wake on LAN definesEmil Tantilov2011-03-03
| | | | | | | | This change just cleans up a few defines in ixgbe_type.h related to wake on LAN. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Enable Jumbo Frames on the X540 10Gigabit ControllerGreg Rose2011-02-24
| | | | | | | | | The X540 controller supports jumbo frames in SR-IOV mode. Allow configuration of jumbo frames either in the PF driver or on behalf of a VF. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge branch 'master' of ↵David S. Miller2011-02-19
|\ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/e1000e/netdev.c net/xfrm/xfrm_policy.c
| * ixgbe: work around for DDP last buffer sizeAmir Hanania2011-02-17
| | | | | | | | | | | | | | | | | | | | A HW limitation was recently discovered where the last buffer in a DDP offload cannot be a full buffer size in length. Fix the issue with a work around by adding another buffer with size = 1. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 11:01:17 -0500