aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAge
* ixgbe: UTA table incorrectly programmedGreg Rose2012-04-15
| | | | | | | | | | | | | | | | | The UTA table was being set to the functional equivalent of promiscuous mode. This was resulting in traffic from the virtual function being flooded onto the wire and the PF device. This resulted in additional overhead for VF traffic sent to the network and in the case of traffic sent to the PF or another VF resulted in unwanted packets on the wire. This was actually not the intended behavior. Now that we can program the embedded switch correctly we can remove this snippit of code. Users who want to support this should configure the FDB correctly using the FDB ops. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: allow RAR table to be updated in promisc modeJohn Fastabend2012-04-15
| | | | | | | | | This allows RAR table updates while in promiscuous. With SR-IOV enabled it is valuable to allow the RAR table to be updated even when in promisc mode to configure forwarding Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: enable FDB netdevice opsJohn Fastabend2012-04-15
| | | | | | | Enable FDB ops on ixgbe when in SR-IOV mode. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: do not drop rx/tx interrupts before they are scheduledTony Zelenoff2012-04-15
| | | | | | | | | | | | | To prevent interrupts lost they should be dropped only if they are scheduled via napi interfaces. In other case, there is exists situation when napi handler process TX interrupt, stay in RX processing and in that moment any other interrupt received. Then before this patch TX bit in ISR will be cleaned, napi schedule will not occur in case of currently processing event and TX interrupt definitely will be lost. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: do not process interrupts in cycle in handlerTony Zelenoff2012-04-15
| | | | | | | | | As the rx/tx handled inside napi handler, the cycle is not needed now, because only the rx/tx need such kind of processing. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: enable errors and link ints when rx/tx scheduledTony Zelenoff2012-04-15
| | | | | Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: add value to check ability of reenabling IRQsTony Zelenoff2012-04-15
| | | | | | | | | | Unfortunately it is not clear from code is usage of IMR register possible or not. So, to prevent possible side-effects of reading this register i prefer store interrupts enable flag separately. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: make function to set imr of cardTony Zelenoff2012-04-15
| | | | | | | | This function should be used later to set/remove proper bits in imr to disable only rx ints. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: use defined functions to disable irqTony Zelenoff2012-04-15
| | | | | | | | Looks like direct writes to IMR register is not good idea, because there are exist functions to make this work. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: add napi process of tx interruptsTony Zelenoff2012-04-15
| | | | | | | | | Make the tx ints processing same as rx ones via napi. The idea got from e1000. The interrupt disabling is still not fine grained. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: make driver napi compatibleTony Zelenoff2012-04-15
| | | | | | | | | This is first step, here there is no fine interrupt disabling which cause TX/ERR interrupts stalling when RX scheduled ints processed. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atl1: handle rx in separate conditionTony Zelenoff2012-04-15
| | | | | | | | Remove rx from unlikely optimization in case of rx is very likely thing for network card. This also reduce code a bit. Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix spelling typo in netMasanari Iida2012-04-14
| | | | | | | Correct spelling typo within drivers/net. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: add I2C clock stretchingDon Skidmore2012-04-14
| | | | | | | | | | This patch adds support for I2C clock stretching which is required per SFF-8636. Customers with passive DA cables implement clock stretching would fail without this patch. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Update version to 3.4.7.Carolyn Wyborny2012-04-14
| | | | | | Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: cleanup boolean logicBruce Allan2012-04-14
| | | | | | | | | | | | | | | | | | Replace occurrences of 'if (<bool expr> == <1|0>)' with 'if ([!]<bool expr>)' Replace occurrences of '<bool var> = (<non-bool expr>) ? true : false' with '<bool var> = <non-bool expr>'. Replace occurrence of '<bool var> = <non-bool expr>' with '<bool var> = !!<non-bool expr>' While the latter replacement is not really necessary, it is done here for consistency and clarity. No functional changes. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: cleanup remaining strings split across multiple linesBruce Allan2012-04-14
| | | | | | | | | | Now that split strings generate checkpatch warnings (per Chapter 2 of Documentation/CodingStyle to make it easier to grep the code for the string) cleanup the remaining instances of them in the driver. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e100: enable transmit time stamping.Richard Cochran2012-04-14
| | | | | | | | | This patch enables software (and phy device) transmit time stamping. Tested on an old PIII laptop with built in NIC. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e100: Support the get_ts_info ethtool method.Richard Cochran2012-04-14
| | | | | | Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* net: WIZnet drivers: fix possible NULL dereferenceMike Sinkovsky2012-04-13
| | | | | | | | | This fixes possible null dereference in probe() function: when both .mac_addr and .link_gpio are unknown, dev.platform_data may be NULL Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mike Sinkovsky <msink@permonline.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: replace open-coded ARRAY_SIZE with macroJim Cromie2012-04-13
| | | | | Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* enic: replace open-coded ARRAY_SIZE with macroJim Cromie2012-04-13
| | | | | Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* broadcom: replace open-coded ARRAY_SIZE with macroJim Cromie2012-04-13
| | | | | Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-04-12
|\
| * Merge branch 'stable' of ↵Linus Torvalds2012-04-06
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bug fixes from Chris Metcalf: "This includes Paul Gortmaker's change to fix the <asm/system.h> disintegration issues on tile, a fix to unbreak the tilepro ethernet driver, and a backlog of bugfix-only changes from internal Tilera development over the last few months. They have all been to LKML and on linux-next for the last few days. The EDAC change to MAINTAINERS is an oddity but discussion on the linux-edac list suggested I ask you to pull that change through my tree since they don't have a tree to pull edac changes from at the moment." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits) drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing MAINTAINERS: update EDAC information tilepro ethernet driver: fix a few minor issues tile-srom.c driver: minor code cleanup edac: say "TILEGx" not "TILEPro" for the tilegx edac driver arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally arch/tile: remove bogus performance optimization arch/tile: return SIGBUS for addresses that are unaligned AND invalid arch/tile: fix finv_buffer_remote() for tilegx arch/tile: use atomic exchange in arch_write_unlock() arch/tile: stop mentioning the "kvm" subdirectory arch/tile: export the page_home() function. arch/tile: fix pointer cast in cacheflush.c arch/tile: fix single-stepping over swint1 instructions on tilegx arch/tile: implement panic_smp_self_stop() arch/tile: add "nop" after "nap" to help GX idle power draw arch/tile: use proper memparse() for "maxmem" options arch/tile: fix up locking in pgtable.c slightly arch/tile: don't leak kernel memory when we unload modules arch/tile: fix bug in delay_backoff() ...
| | * drivers/net/ethernet/tile: fix netdev_alloc_skb() bombingChris Metcalf2012-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit dae2e9f430c46c29e3f771110094bd3da3625aa4 changed dev_alloc_skb() to netdev_alloc_skb(), adding a dev pointer, but erroneously used "->" instead of "." for a struct member when accessing the dev pointer. This change fixes the build breakage. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
| | * tilepro ethernet driver: fix a few minor issuesChris Metcalf2012-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes a number of issues seen with the driver: - Improve handling of return credits to the hardware shim - Use skb_frag_size() appropriately - Fix driver so it works properly with netpoll for console over UDP Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
* | | r6040: update copyright from 2007 to nowFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r6040: define and use bits of register PHY_CCFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | | | | | | | Define and use the bits of the PHY_CC (status change configuration) register. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r6040: define and use MTPR transmit enable bitFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | | | | | | | Define MTPR bit 0 of the register and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r6040: define and use MLSR register bitsFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the MLSR (MAC Last Status Register bits) for: - tx fifo under-run - tx exceed collision - tx late collision Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r6040: fix typo on stats update in tx pathFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | | | | | | | | | | We are currently updating the rx fifo error counter in the tx path while it should have been the tx fifo error counter, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r6040: add a MAC operation timeout defineFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | | | | | | | | | | 2048 is the usual value for busy-waiting on a register r/w, define it as MAC_DEF_TIMEOUT and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r6040: remove unused variable mcr1 from private structureFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | r6040: consolidate MAC reset to its own functionFlorian Fainelli2012-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reset of the MAC is currently done identically from two places and one place is not waiting for the MAC_SM bit to be set after reset. Everytime the MAC is software resetted a state machine is also needed so consolidate the reset to its own function. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | wiznet: Add missing #include <linux/irq.h>Geert Uytterhoeven2012-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | m68k/allmodconfig: drivers/net/ethernet/wiznet/w5100.c: In function ‘w5100_hw_probe’: drivers/net/ethernet/wiznet/w5100.c:680: error: ‘IRQ_TYPE_LEVEL_LOW’ undeclared (first use in this function) drivers/net/ethernet/wiznet/w5300.c: In function ‘w5300_hw_probe’: drivers/net/ethernet/wiznet/w5300.c:594: error: ‘IRQ_TYPE_LEVEL_LOW’ undeclared (first use in this function) Include <linux/irq.h>, which provides the declaration for IRQ_TYPE_LEVEL_LOW. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | drivers/net: Remove CONFIG_WIZNET_TX_FLOW optionMike Sinkovsky2012-04-12
| | | | | | | | | | | | | | | | | | | | | | | | This option was there for debugging race conditions, just remove it, and assume TX_FLOW is always enabled. Signed-off-by: Mike Sinkovsky <msink@permonline.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-04-10
|\| |
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-04-06
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Fix inaccuracies in network driver interface documentation, from Ben Hutchings. 2) Fix handling of negative offsets in BPF JITs, from Jan Seiffert. 3) Compile warning, locking, and refcounting fixes in netfilter's xt_CT, from Pablo Neira Ayuso. 4) phonet sendmsg needs to validate user length just like any other datagram protocol, fix from Sasha Levin. 5) Ipv6 multicast code uses wrong loop index, from RongQing Li. 6) Link handling and firmware fixes in bnx2x driver from Yaniv Rosner and Yuval Mintz. 7) mlx4 erroneously allocates 4 pages at a time, regardless of page size, fix from Thadeu Lima de Souza Cascardo. 8) SCTP socket option wasn't extended in a backwards compatible way, fix from Thomas Graf. 9) Add missing address change event emissions to bonding, from Shlomo Pongratz. 10) /proc/net/dev regressed because it uses a private offset to track where we are in the hash table, but this doesn't track the offset pullback that the seq_file code does resulting in some entries being missed in large dumps. Fix from Eric Dumazet. 11) do_tcp_sendpage() unloads the send queue way too fast, because it invokes tcp_push() when it shouldn't. Let the natural sequence generated by the splice paths, and the assosciated MSG_MORE settings, guide the tcp_push() calls. Otherwise what goes out of TCP is spaghetti and doesn't batch effectively into GSO/TSO clusters. From Eric Dumazet. 12) Once we put a SKB into either the netlink receiver's queue or a socket error queue, it can be consumed and freed up, therefore we cannot touch it after queueing it like that. Fixes from Eric Dumazet. 13) PPP has this annoying behavior in that for every transmit call it immediately stops the TX queue, then calls down into the next layer to transmit the PPP frame. But if that next layer can take it immediately, it just un-stops the TX queue right before returning from the transmit method. Besides being useless work, it makes several facilities unusable, in particular things like the equalizers. Well behaved devices should only stop the TX queue when they really are full, and in PPP's case when it gets backlogged to the downstream device. David Woodhouse therefore fixed PPP to not stop the TX queue until it's downstream can't take data any more. 14) IFF_UNICAST_FLT got accidently lost in some recent stmmac driver changes, re-add. From Marc Kleine-Budde. 15) Fix link flaps in ixgbe, from Eric W. Multanen. 16) Descriptor writeback fixes in e1000e from Matthew Vick. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) net: fix a race in sock_queue_err_skb() netlink: fix races after skb queueing doc, net: Update ndo_start_xmit return type and values doc, net: Remove instruction to set net_device::trans_start doc, net: Update netdev operation names doc, net: Update documentation of synchronisation for TX multiqueue doc, net: Remove obsolete reference to dev->poll ethtool: Remove exception to the requirement of holding RTNL lock MAINTAINERS: update for Marvell Ethernet drivers bonding: properly unset current_arp_slave on slave link up phonet: Check input from user before allocating tcp: tcp_sendpages() should call tcp_push() once ipv6: fix array index in ip6_mc_add_src() mlx4: allocate just enough pages instead of always 4 pages stmmac: re-add IFF_UNICAST_FLT for dwmac1000 bnx2x: Clear MDC/MDIO warning message bnx2x: Fix BCM57711+BCM84823 link issue bnx2x: Clear BCM84833 LED after fan failure bnx2x: Fix BCM84833 PHY FW version presentation bnx2x: Fix link issue for BCM8727 boards. ...
| | * | mlx4: allocate just enough pages instead of always 4 pagesThadeu Lima de Souza Cascardo2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver uses a 2-order allocation, which is too much on architectures like ppc64, which has a 64KiB page. This particular allocation is used for large packet fragments that may have a size of 512, 1024, 4096 or fill the whole allocation. So, a minimum size of 16384 is good enough and will be the same size that is used in architectures of 4KiB sized pages. This will avoid allocation failures that we see when the system is under stress, but still has plenty of memory, like the one below. This will also allow us to set the interface MTU to higher values like 9000, which was not possible on ppc64 without this patch. Node 1 DMA: 737*64kB 37*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 51904kB 83137 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 10420096kB Total swap = 10420096kB 107776 pages RAM 1184 pages reserved 147343 pages shared 28152 pages non-shared netstat: page allocation failure. order:2, mode:0x4020 Call Trace: [c0000001a4fa3770] [c000000000012f04] .show_stack+0x74/0x1c0 (unreliable) [c0000001a4fa3820] [c00000000016af38] .__alloc_pages_nodemask+0x618/0x930 [c0000001a4fa39a0] [c0000000001a71a0] .alloc_pages_current+0xb0/0x170 [c0000001a4fa3a40] [d00000000dcc3e00] .mlx4_en_alloc_frag+0x200/0x240 [mlx4_en] [c0000001a4fa3b10] [d00000000dcc3f8c] .mlx4_en_complete_rx_desc+0x14c/0x250 [mlx4_en] [c0000001a4fa3be0] [d00000000dcc4eec] .mlx4_en_process_rx_cq+0x62c/0x850 [mlx4_en] [c0000001a4fa3d20] [d00000000dcc5150] .mlx4_en_poll_rx_cq+0x40/0x90 [mlx4_en] [c0000001a4fa3dc0] [c0000000004e2bb8] .net_rx_action+0x178/0x450 [c0000001a4fa3eb0] [c00000000009c9b8] .__do_softirq+0x118/0x290 [c0000001a4fa3f90] [c000000000031df8] .call_do_softirq+0x14/0x24 [c000000184c3b520] [c00000000000e700] .do_softirq+0xf0/0x110 [c000000184c3b5c0] [c00000000009c6d4] .irq_exit+0xb4/0xc0 [c000000184c3b640] [c00000000000e964] .do_IRQ+0x144/0x230 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Tested-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | stmmac: re-add IFF_UNICAST_FLT for dwmac1000Marc Kleine-Budde2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit (bfab27a stmmac: add the experimental PCI support) the IFF_UNICAST_FLT flag has been removed from the stmmac_mac_device_setup() function. This patch re-adds the flag. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Clear MDC/MDIO warning messageYaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch clears a warning message of "MDC/MDIO access timeout" which may appear when interface is loaded due to missing clock setting before resetting the LED, and starting periodic function too early. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Fix BCM57711+BCM84823 link issueYaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a link problem on the second port of BCM57711 + BCM84823 boards due to incorrect macro usage. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Clear BCM84833 LED after fan failureYaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Fix BCM84833 PHY FW version presentationYaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Fix link issue for BCM8727 boards.Yaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a link problem on BCM57712 + BCM8727 designs in which the TX laser is controller by GPIO, after 1.60.xx drivers were previously loaded. On these designs the TX_LASER is enabled by logic AND between the PHY (through MDIO), and the GPIO. When an old driver is used, it disables the MDIO part, hence the GPIO control had no affect de facto. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Restore 1G LED on BCM57712+BCM8727 designs.Yaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix no-LED problem when link speed is 1G on BCM57712 + BCM8727 designs, by removing a logic error checking for a different PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Fix BCM578x0-SFI pre-emphasis settingsYaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix 578x0-SFI pre-emphasis settings per HW recommendations to achieve better link strength. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Fix BCM57810-KR AN speed transitionYaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BCM57810-KR link may not come up in 1G after running loopback test, so set the relevant registers to their default values before starting KR autoneg. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | bnx2x: Fix BCM57810-KR FCYaniv Rosner2012-04-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix 57810-KR flow-control handling link is achieved via CL37 AN. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-04 17:57:48 -0500