aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom
Commit message (Collapse)AuthorAge
...
* | bnx2x: Cosmetic changesYaniv Rosner2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes some cosmetic changes to the code: 1. Code alignment. 2. Merge read-modify-write into a single function (read_or_write / read_and_write). 3. Merge several write registers into a for-loop write using a static array. 4. Remove empty lines. 5. Fix comments. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Always take PHY lockYaniv Rosner2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Taking PHY lock is not required on some older designs, but we are removing this complication and always taking it since it is always required on newer designs and does not worth the code complication on the older boards. Taking PHY lock was initially required only on specific boards which had their MDC/MDIO bus crossed, but since this lock is now always required, for example, when NCSI is present, the PHY lock will always be taken. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Add support for BCM84834Yaniv Rosner2012-11-28
| | | | | | | | | | | | | | | | | | Add support for the 10G-baseT PHY - BCM84834, which is the quad-port version of the dual-port BCM84833. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Fix SFP+ current leakageYaniv Rosner2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | Per measurements, the SFP+ suffered from small current leakage in two cases: - When no module was plugged and TX laser was disabled. The fix was to enable it, and when module is plugged in, check if it needs to be disabled. - When over-current event occurs due to invalid SFP+ module, the HW basically shuts down the current for this module, but the SW needs to complete this by issuing a power down via a GPIO. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Change MDIO clock settingsYaniv Rosner2012-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When drivers works on top of an old bootcode, it is theoretically subjected to MDC/MDIO failures since the MDIO clock is set in the beginning of each sequence, rather than per CL45 command. On rare cases an old bootcodes may change that in the middle, so to address that, the MDIO clock is set for each CL45 access. In addition, setting the MDIO clock is now done per EMAC base, and not per port number, since a specific port can potentially use both EMACs for different PHY accesses. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Add support for 20G-KR2Yaniv Rosner2012-11-28
| | | | | | | | | | | | Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Activate LFAYaniv Rosner2012-11-28
| | | | | | | | | | | | | | | | | | | | In case Link Flap Avoidance feature is supported by the MCP, bnx2x will enable it, and will pass the appropriate parameter when load request is sent to the MCP. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-11-25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/wireless/iwlwifi/pcie/tx.c Minor iwlwifi conflict in TX queue disabling between 'net', which removed a bogus warning, and 'net-next' which added some status register poking code. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: remove redundant warning logAriel Elior2012-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix bug where a register which was only meant to be read in 578xx/57712 devices causes a bogus error message to be logged when read from other devices. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | bnx2x: Remove duplicate inclusion of bnx2x_hsi.hSachin Kamat2012-11-20
| | | | | | | | | | | | | | | | | | | | | bnx2x_hsi.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tg3: Use tp->rxq_cnt when checking RSS tables.Michael Chan2012-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | irq_cnt is no longer reliable since rxq_cnt can be independently configured. Update version to 3.127. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tg3: Cleanup hardcoded ethtool test array indexesNithin Nayak Sujir2012-11-14
| | | | | | | | | | | | | | | | | | Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tg3: Prevent spurious tx timeout by setting carrier off before tx disable.Nithin Nayak Sujir2012-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog will not trigger when the carrier is off when reconfiguring the device. Because carrier state is now off during reset, we need to introduce a link_up flag to keep track of link state during PHY setup. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tg3: Set 10_100_ONLY flag for additional 10/100 Mbps devicesNithin Nayak Sujir2012-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Also refactor the conditional to use the existing tg3_pci_tbl array. - Set flags in the driver_data field of the pci_device_id structure to identify these devices. - Add PCI_DEVICE_SUB() to pci.h to declare PCI 4-part IDs to match these devices. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | bnx2x: Add static declaration to several functionsMerav Sicron2012-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds static declaration to several functions in bnx2x. It eliminates newly introduced sparse warnings reported by Fengguang Wu. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-11-10
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: bnx2x: Fix typo in bnx2x driverMasanari Iida2012-11-03
| | | | | | | | | | | | | | | | | | | | | Correct spelling typo in bnx2x driver Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: fix HW initialization using fw 7.8.xDmitry Kravkov2012-11-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Disable FCoE for 57840 since not yet supported by FWDmitry Kravkov2012-11-01
| | | | | | | | | | | | | | | Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Fix no link on 577xx 10G-baseTYaniv Rosner2012-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the Warpcore supports various link types, need to set only the correct supported modes for XFI which is the serdes interface for the 10G-baseT PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Fix unrecognized SFP+ module after driver is loadedYaniv Rosner2012-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When SFP+ module is plugged in after driver is already loaded, it may not be recognized, so set SFP module recognition time up to 300ms, without resetting the module power in the middle. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Fix potential incorrect link speed provisionYaniv Rosner2012-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Restore global registers back to default.Yaniv Rosner2012-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Fix link down in 57712 following LFAYaniv Rosner2012-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: Fix 57810 1G-KR link against certain switches.Yaniv Rosner2012-11-01
| |/ | | | | | | | | | | | | | | | | | | Fix 1G KR link by restoring CL72 misc control register to default value rather than 0. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Support loading cnic resources at run-timeMerav Sicron2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the BCM_CNIC define with a flag which can change at run-time and which does not use the CONFIG_CNIC kconfig option. For the PF/hypervisor driver cnic is always supported, however allocation of cnic resources and configuration of the HW for offload mode is done only when the cnic module registers bnx2x. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: HSI change for 'update' ramrodMerav Sicron2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | This patch updates the driver-FW HSI to support changes to the 'update' ramrod (FW supports this change since 7.8.2). This ramrod is sent when the cnic module registers bnx2x, to enable changing the nic_mode configuration in HW at run-time. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tg3: Call tg3_netif_stop() from tg3_stop()Nithin Nayak Sujir2012-11-06
| | | | | | | | | | | | | | | | | | | | instead of making separate tg3_napi_disable() and netif_tx_disable() calls. Update version to 3.126. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tg3: Support 5717 C0Michael Chan2012-11-06
|/ | | | | | | Add support for 5717C0 which is a 5720A0 with special bonds-out option. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: fix handling mf storage modesDmitry Kravkov2012-10-16
| | | | | | | | | | | Since commit a3348722 AFEX FCoE function is continuously reset. The patch prevents the resetting and removes debug print to stop garbaging syslog. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-10-09
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ...
| * MIPS: BCM63XX: Move DMA descriptor definition into common header fileKevin Cernekee2012-08-30
| | | | | | | | | | | | | | | | | | | | The "IUDMA" engine used by bcm63xx_enet is also used by other blocks, such as the USB 2.0 device. Move the definitions into a common file so that they do not need to be duplicated in each driver. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4082/ Signed-off-by: John Crispin <blogic@openwrt.org>
* | bnx2x: fix ring size for 10G functionsYuval Mintz2012-10-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d760fc37b0f74502b3f748951f22c6683b079a8e caused 1G functions to allocate rx rings which were 1/10 of the size of 10G functions' rx rings. However, it also caused 10G functions on 5771x boards to allocate small rings, which limits their possible (default) rx throughput. This patch causes all 10G functions to use rings of intended length by default. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tg3: Fix sparse warnings.Michael Chan2012-10-02
| | | | | | | | | | | | | | | | | | | | | | | | drivers/net/ethernet/broadcom/tg3.c:8121:8: warning: symbol 'i' shadows an earlier one drivers/net/ethernet/broadcom/tg3.c:8003:6: originally declared here drivers/net/ethernet/broadcom/tg3.c:785:5: warning: symbol 'tg3_ape_scratchpad_read' was not declared. Should it be static? drivers/net/ethernet/broadcom/tg3.c:7781:19: warning: Using plain integer as NULL pointer drivers/net/ethernet/broadcom/tg3.c:10231:31: error: bad constant expression Reported-by: Fengguang Wu <fenguang.wu@intel.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: use strlcpy() to copy a stringDan Carpenter2012-10-02
| | | | | | | | | | | | | | | | | | DRV_MODULE_VERSION is smaller than the ->version buffer so the memcpy() copies 1 byte past the end of the string. It's not super harmful, but it makes the static checkers complain. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2012-10-02
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
| * | tg3: unconditionally select HWMON support when tg3 is enabled.Paul Gortmaker2012-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is the seldom used corner case where HWMON=m at the same time as TIGON3=y (typically randconfigs) which will cause a link fail like: drivers/built-in.o: In function `tg3_close': tg3.c:(.text+0x16bd86): undefined reference to `hwmon_device_unregister' drivers/built-in.o: In function `tg3_hwmon_open': tg3.c:(.text+0x16fc4b): undefined reference to `hwmon_device_register' make[1]: *** [vmlinux] Error 1 Fix it as suggested by DaveM[1] by having the Kconfig logic simply select HWMON when TIGON3 is selected. This gets rid of all the extra IS_ENABLED ifdeffery in tg3.c as a side benefit. [1] http://marc.info/?l=linux-netdev&m=134250573718151&w=2 Cc: Michael Chan <mchan@broadcom.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Anisse Astier <anisse@astier.eu> Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: update version to 1.78.00-0.Yuval Mintz2012-10-01
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x,cnic: use FW 7.8.2Yuval Mintz2012-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the bnx2x and cnic drivers into using FW 7.8.2 which was recently submitted into the linux-firmware tree. A short summary of minor bugs fixed by this FW: 1. In switch dependent mode, fix several issues regarding inner vlan vs. DCB priorities. 2. iSCSI - not all packets were completed on a forward channel. 3. DCB - fixed for 4-port devices. 4. Fixed false parity reported in CAM memories when operating near -5% on the 1.0V core supply. 5. ETS default settings are set to fairness between traffic classes (rather than strict priority), and uses the same chip receive buffer configuration for both PFC and pause. For a complete list of fixes made by this FW, see commit 236367db in the linux-firmware git repository. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Disable multiple TX rings by default due to hardware flawMichael Chan2012-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simple round-robin hardware TX scheduling can cause starvation of TX rings with small packets when other TX rings have large TSO or jumbo packets. In the simplest case, consider 2 TCP streams running in opposite directions. The TSO TX traffic will hash to one ring and the ACKs for the incoming data on a different TCP connection will hash to a different TX ring. The hardware fetches one complete TSO packet (up to 64K data) before servicing the other TX ring. When it gets to the other TX ring, it will only fetch one packet (64-byte ACK packet in this case). After that, it will switch back to the 1st ring filled with more TSO packets. Because only one ACK can go out roughly every 500 usec in this case, the incoming data rate becomes very low. Update version to 3.125. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Add support for ethtool -L|-l to get/set the number of rings.Michael Chan2012-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | Default remains the same. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Refactor tg3_close()Michael Chan2012-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | by introducing tg3_stop() that does the opposite of tg3_start(). This function will be useful when adding the support for changing the numbe of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Refactor tg3_open()Michael Chan2012-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | by introducing tg3_start() that handles all initialization steps from IRQ allocation. This function will be needed when adding support for changing the number of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Separate coalescing setup for rx and txMichael Chan2012-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | since the number of rings can be different. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Allow number of rx and tx rings to be set independently.Michael Chan2012-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | irq_cnt is no longer necessarily equal to the number rx or tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tg3: Introduce separate functions to allocate/free RX/TX rings.Michael Chan2012-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is preparation work to allow the number of RX and TX rings to be configured separately. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-28
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | bnx2x: Improve code around bnx2x_tests_str_arrMerav Sicron2012-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the definition of bnx2x_tests_str_arr from static char pointer to static const char bi-directional array. Also the bnx2x_get_strings function is simplified. Reported-by: Joe Perches <joe@perches.com> Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-15
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: net/netfilter/nfnetlink_log.c net/netfilter/xt_LOG.c Rather easy conflict resolution, the 'net' tree had bug fixes to make sure we checked if a socket is a time-wait one or not and elide the logging code if so. Whereas on the 'net-next' side we are calculating the UID and GID from the creds using different interfaces due to the user namespace changes from Eric Biederman. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | bnx2x: Utilize Link Flap AvoidanceYuval Mintz2012-09-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change various flows in the bnx2x driver which up until now flapped the link - these flows now benefit from the link flap avoidance mechanism. This includes the removal of the link reset made upon nic init, as it is possible the link is already active at that time. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-01 21:25:57 -0400