aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/e100.c
Commit message (Collapse)AuthorAge
* drivers/net: return operator cleanupEric Dumazet2010-09-26
| | | | | | | | | Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e100/e1000*/igb*/ixgb*: Add missing read memory barrierJeff Kirsher2010-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on patches from Sonny Rao and Milton Miller... Combined the patches to fix up clean_tx_irq and clean_rx_irq. The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. The bug can manifest as a data integrity issue (bad payload data) or as a BUG in skb_pull(). This was a nasty bug to hunt down, if people agree with the fix I think it's a candidate for stable. Previously Submitted to e1000-devel only for ixgbe http://marc.info/?l=e1000-devel&m=126593062701537&w=3 We've now seen this problem hit with other device drivers (e1000e mostly) So I'm resubmitting with fixes for other Intel Device Drivers with similar issues. CC: Milton Miller <miltonm@bga.com> CC: Anton Blanchard <anton@samba.org> CC: Sonny Rao <sonnyrao@us.ibm.com> CC: stable <stable@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: trans_start cleanupsEric Dumazet2010-05-10
| | | | | | | | | | | Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-04-27
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e100.c drivers/net/e1000e/netdev.c
| * e100: Fix the TX workqueue raceAlan Cox2010-04-25
| | | | | | | | | | | | | | | | | | | | Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: convert multicast list to list_headJiri Pirko2010-04-03
| | | | | | | | | | | | | | | | | | | | | | | | | | Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net/e100.c: Use pr_<level> and netif_<level>Joe Perches2010-03-17
|/ | | | | | | | | | Convert DPRINTK, commonly used for debugging, to netif_<level> Remove #define PFX Use #define pr_fmt Consistently use no periods for non-sentence logging messages Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e100: Fix ring parameter change handling regression.David S. Miller2010-03-15
| | | | | | | | | | | | | | | | | | When the PCI pool changes were added to fix resume failures: commit 98468efddb101f8a29af974101c17ba513b07be1 e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failu and commit 70abc8cb90e679d8519721e2761d8366a18212a6 e100: Fix broken cbs accounting due to missing memset. This introduced a problem that can happen if the TX ring size is increased. We need to size the PCI pool using cbs->max instead of the default cbs->count value. Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert multiple drivers to use netdev_for_each_mc_addr, part4Jiri Pirko2010-02-22
| | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko2010-02-12
| | | | | | | | | | | This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan2010-01-08
| | | | | | | | Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e100: Fix broken cbs accounting due to missing memset.Roger Oksanen2009-12-18
| | | | | | | | | | | | | | | | Alan Stern noticed that e100 caused slab corruption. commit 98468efddb101f8a29af974101c17ba513b07be1 changed the allocation of cbs to use dma pools that don't return zeroed memory, especially the cb->status field used to track which cb to clean, causing (the visible) double freeing of skbs and a wrong free cbs count. Now the cbs are explicitly zeroed at allocation time. Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Roger Oksanen <roger.oksanen@cs.helsinki.fi> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-12-02
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/ht.c
| * e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failureRoger Oksanen2009-11-29
| | | | | | | | | | | | | | | | | | | | pci_alloc_consistent uses GFP_ATOMIC allocation that may fail on some systems with limited memory (Bug #14265). pci_pool_alloc allows waiting with GFP_KERNEL. Tested-by: Karol Lewandowski <karol.k.lewandowski@gmail.com> Signed-off-by: Roger Oksanen <roger.oksanen@cs.helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2009-11-19
|\| | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sfc/sfe4001.c drivers/net/wireless/libertas/cmd.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/rtl8187se/Kconfig drivers/staging/rtl8192e/Kconfig
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-11-03
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) mac80211: check interface is down before type change cfg80211: fix NULL ptr deref libertas if_usb: Fix crash on 64-bit machines mac80211: fix reason code output endianness mac80211: fix addba timer ath9k: fix misplaced semicolon on rate control b43: Fix DMA TX bounce buffer copying mac80211: fix BSS leak rt73usb.c : more ids ipw2200: fix oops on missing firmware gre: Fix dev_addr clobbering for gretap sky2: set carrier off in probe net: fix sk_forward_alloc corruption pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames ibmtr: possible Read buffer overflow? net: Fix RPF to work with policy routing net: fix kmemcheck annotations e1000e: rework disable K1 at 1000Mbps for 82577/82578 e1000e: config PHY via software after resets ...
| * | headers: remove sched.h from interrupt.hAlexey Dobriyan2009-10-11
| | | | | | | | | | | | | | | | | | | | | | | | After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* | | Merge branch 'master' of ↵David S. Miller2009-11-06
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/cdc_ether.c All CDC ethernet devices of type USB_CLASS_COMM need to use '&mbm_info'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | e100: e100_phy_init() isolates selected PHY, causes 10 second boot delayBruce Allan2009-10-30
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A change in how PHYs are electrically isolated caused all PHYs to be isolated followed by reverting that isolation for the selected PHY. Unfortunately, isolating the selected PHY for even a short period of time can result in DHCP negotiation taking more than 10 seconds on certain embedded configurations delaying boot time as reported by Bernhard Kaindl. This patch reverts the change to how PHYs are isolated yet still works around the issue for 82552 needing the selected PHY's BMCR register to be written after the unused PHYs are isolated. This code is moved below the setting of nic->phy ID in order to do the 82552-specific workaround. Cc: Bernhard Kaindl <bernhard.kaindl@gmx.net> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e100: Fix to allow systems with FW based cards to resume from STDDavid Graham2009-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices with loadable firmware must have their firmware reloaded after the system resumes from sleep, but the request_firmare() API is not available at this point in the resume flow because tasks are not yet running, and the system will hang if it is called. Work around this issue by only calling request_firmware() for a device's first firmware load, and cache a copy of the pointer to the firmware blob for that device, so that we may reload firmware images even during resume. Signed-off-by: David Graham <david.graham@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Use netdev_alloc_skb_ip_align()Eric Dumazet2009-10-13
|/ | | | | Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-09-02
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/yellowfin.c
| * E100: fix interaction with swiotlb on X86.Krzysztof Hałasa2009-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E100 places it's RX packet descriptors inside skb->data and uses them with bidirectional streaming DMA mapping. Data in descriptors is accessed simultaneously by the chip (writing status and size when a packet is received) and CPU (reading to check if the packet was received). This isn't a valid usage of PCI DMA API, which requires use of the coherent (consistent) memory for such purpose. Unfortunately e100 chips working in "simplified" RX mode have to store received data directly after the descriptor. Fixing the driver to conform to the API would require using unsupported "flexible" RX mode or receiving data into a coherent memory and using CPU to copy it to network buffers. This patch, while not yet making the driver conform to the PCI DMA API, allows it to work correctly on X86 with swiotlb (while not breaking other architectures). Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
* | intel: convert drivers to netdev_tx_tStephen Hemminger2009-09-01
| | | | | | | | | | | | | | Get rid of some bogus return wrapping as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2009-07-16
|\| | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/orinoco/main.c
| * E100: work around the driver using streaming DMA mapping for RX descriptors.Krzysztof Halasa2009-07-16
| | | | | | | | | | | | | | | | | | | | | | | | | | E100 places it's RX packet descriptors inside skb->data and uses them with bidirectional streaming DMA mapping. Unfortunately it fails to transfer skb->data ownership to the device after it reads the descriptor's status, breaking on non-coherent (e.g., ARM) platforms. This have to be converted to use coherent memory for the descriptors. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy2009-07-05
|/ | | | | | | | | | | This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Net / e100: Fix suspend of devices that cannot be power managedRafael J. Wysocki2009-06-18
| | | | | | | | | | | | If the adapter is not power-manageable using either ACPI, or the native PCI PM interface, __e100_power_off() returns error code, which causes every attempt to suspend to fail, although it should return 0 in such a case. Fix this problem by ignoring the return value of pci_set_power_state() in __e100_power_off(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-06-15
|\ | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
| * trivial: typo (en|dis|avail|remove)bale -> (en|dis|avail|remove)ableThadeu Lima de Souza Cascardo2009-06-12
| | | | | | | | | | Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | net: use symbolic values for ndo_start_xmit() return codesPatrick McHardy2009-06-13
| | | | | | | | | | | | | | | | | | | | Convert magic values 1 and -1 to NETDEV_TX_BUSY and NETDEV_TX_LOCKED respectively. 0 (NETDEV_TX_OK) is not changed to keep the noise down, except in very few cases where its in direct proximity to one of the other values. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e100: add non-MII PHY supportAndreas Mohr2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restore support for cards with MII-lacking PHYs as compared to removed pre-2.6.29 eepro100 driver: use full low-level MII I/O access abstraction by providing clean PHY-specific mdio_ctrl() functions for either standard MII-compliant cards, slightly special ones or non-MII PHY ones. We now have another netdev_priv member for mdio_ctrl(), thus we have some array indirection, but we save some additional opcodes for specific phy_82552_v handling in the common case. [akpm@linux-foundation.org: cleanups] Signed-off-by: Andreas Mohr <andi@lisas.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | e100: Fix napi_enable BUG_ON when recovering from EEH errorAndre Detsch2009-06-08
|/ | | | | | | | | | | | | | | BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)) was being hit during e100 EEH recovery. The problem source was a napi_enable call being made during e100_io_error_detected. Napi should remain disabled after e100_down, and only be reenabled when the interface is recovered. This patch also updates e100_io_error_detected in order to make it similar to the current versions of the error_detected callback in drivers such as e1000e and ixgbe. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e100: do not go D3 in shutdown unless system is powering offThadeu Lima de Souza Cascardo2009-04-29
| | | | | | | | | | | | | | | | After experimenting with kexec with the last merges after 2.6.29, I've had some problems when probing e100. It would not read the eeprom. After some bisects, I realized this has been like that since forever (at least 2.6.18). The problem is that shutdown is doing the same thing that suspend does and puts the device in D3 state. I couldn't find a way to get the device back to a sane state in the probe function. So, based on some similar patches from Rafael J. Wysocki for e1000, e1000e, and ixgbe, I wrote this one for e100. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-07
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* e100: add support for 82552 10/100 adapterBruce Allan2009-03-21
| | | | | | | | | | | This patch enables support for the new Intel 82552 adapter (new PHY paired with the existing MAC in the ICH7 chipset). No new features are added to the driver, however there are minor changes due to updated registers and a few workarounds for hardware errata. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove redundant NAPI functionsBen Hutchings2009-01-21
| | | | | | | | | | | Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* firmware: convert e100 driver to request_firmware()Jaswinder Singh Rajput2009-01-07
| | | | | | | Thanks to David Woodhouse for help. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e100: cosmetic cleanupBruce Allan2009-01-04
| | | | | | | | Add missing space after if, switch, for and while keywords. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unused netdev arg from some NAPI interfaces.Neil Horman2008-12-22
| | | | | | | | | | When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e100: cleanup link up/down messagesJeff Kirsher2008-11-27
| | | | | | | | | The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: add more functions to netdevice opsStephen Hemminger2008-11-20
| | | | | | | | | | | | This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e100: convert to net_device_opsStephen Hemminger2008-11-20
| | | | | | | Convert to new network device ops interface. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-11-19
|\ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/isdn/i4l/isdn_net.c fs/cifs/connect.c
| * e100: fix dma error in direction for mappingJesse Brandeburg2008-11-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom <grfstrm@users.sourceforge.net> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: Kill now superfluous ->last_rx stores.David S. Miller2008-11-04
| | | | | | | | | | | | | | | | | | | | | | | | | | The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
* | e100: adapt to the reworked PCI PMRafael J. Wysocki2008-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapt the e100 driver to the reworked PCI PM * Use the observation that it is sufficient to call pci_enable_wake() once, unless it fails Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Frans Pop <elendil@planet.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | net: convert print_mac to %pMJohannes Berg2008-10-27
|/ | | | | | | | | | | | This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-10-01
|\ | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath9k/core.c drivers/net/wireless/ath9k/main.c net/core/dev.c
| * e100: Use pci_pme_active to clear PME_Status and disable PME#Rafael J. Wysocki2008-09-18
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently e100 uses pci_enable_wake() to clear pending wake-up events and disable PME# during intitialization, but that function is not suitable for this purpose, because it immediately returns error code if device_may_wakeup() returns false for given device. Make e100 use pci_pme_active(), which carries out exactly the required operations, instead. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 20:24:31 -0500