aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/bonding
Commit message (Collapse)AuthorAge
* rtnl/bond: don't send rtnl msg for unregistered ifaceNicolas Dichtel2015-05-17
| | | | | | | | | | | | | | | | | | | | | | | | Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko <jiri@resnulli.us> Reported-by: Julien Meunier <julien.meunier@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_tablePai2015-04-29
| | | | | | | | | | | | | | | | | | This patch fixes a Kernel Panic in bonding driver debugfs file: rlb_hash_table. $> modprobe bonding mode=6 $> cat /sys/kernel/debug/bonding/bond0/rlb_hash_table This will crash the kernel. The struct alb_bond_info is initialized only when the bonding interface is initialized (ip link set bond0 up) and not at the time it is allocated. If we try to read the table before that, it'll result in a kernel panic. The patch applies against both net and net-next Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/bonding: Make DRV macros privateMatan Barak2015-04-26
| | | | | | | | | | | | | | | | The bonding modules currently defines four macros with general names that pollute the global namespace: DRV_VERSION DRV_RELDATE DRV_NAME DRV_DESCRIPTION Fixing that by defining a private bonding_priv.h header files which includes those defines. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: Remove unnecessary initializationMahesh Bandewar2015-04-08
| | | | | | | | bond_3ad_bind_slave() calls ad_initialize_port() and then immediately assigns correct values making some of that initialization unnecessary. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: Code re-factoring for admin, oper-key operationsMahesh Bandewar2015-04-08
| | | | | | | | | This patch breaks the rich assignments into it's own statements and removes some duplicate code where admin-key, & oper-key are updated. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-04-02
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: Bonding Overriding Configuration logic restored.Anton Nayshtut2015-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before commit 3900f29021f0bc7fe9815aa32f1a993b7dfdd402 ("bonding: slight optimizztion for bond_slave_override()") the override logic was to send packets with non-zero queue_id through the slave with corresponding queue_id, under two conditions only - if the slave can transmit and it's up. The above mentioned commit changed this logic by introducing an additional condition - whether the bond is active (indirectly, using the slave_can_tx and later - bond_is_active_slave), that prevents the user from implementing more complex policies according to the Documentation/networking/bonding.txt. Signed-off-by: Anton Nayshtut <anton@swortex.com> Signed-off-by: Alexey Bogoslavsky <alexey@swortex.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: Fix another case of LACPDU not sent on slaveMahesh Bandewar2015-03-31
| | | | | | | | | | | | | | | | | | | | | | | | When mii-mon discovers that the link is up, it will call bond_3ad_handle_link_change() but we forget to add the LACP_ENABLED flag when we discover the speed and duplex for the slave link are normal. Change-Id: Ie8b268ecfeea0f99bf9fdcd72706c0653f9d9e49 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: deprecate BOND_MONITOR_CHURNED in favor of existing definitionsMahesh Bandewar2015-03-31
| | | | | | | | | | | | | | | | | | AD_PORT_ACTOR_CHURN and AD_PORT_PARTNER_CHURN are already present and essentially BOND_MONITOR_CHURNED is a combination of these two definitions. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: Remove hardcoded initializationMahesh Bandewar2015-03-31
| | | | | | | | | | | | Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: Don't segment multiple tagged packets on bonding deviceToshiaki Makita2015-03-29
| | | | | | | | | | | | | | | | Bonding devices don't need to segment multiple tagged packets since their slaves can segment them. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: implement bond_poll_controller()Mahesh Bandewar2015-03-06
| | | | | | | | | | | | | | | | | | | | | | This patches implements the poll_controller support for all bonding driver. If the slaves have poll_controller net_op defined, this implementation calls them. This is mode agnostic implementation and iterates through all slaves (based on mode) and calls respective handler. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: Implement port churn-machine (AD standard 43.4.17).Mahesh Bandewar2015-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Churn Detection machines detect the situation where a port is operable, but the Actor and Partner have not attached the link to an Aggregator and brought the link into operation within a bound time period. Under normal operation of the LACP, agreement between Actor and Partner should be reached very rapidly. Continued failure to reach agreement can be symptomatic of device failure. Actor-churn-detection state-machine Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> =================================== BEGIN=True + PortEnable=False | v +------------------------+ ActorPort.Sync=True +------------------+ | ACTOR_CHURN_MONITOR | ---------------------> | NO_ACTOR_CHURN | |========================| |==================| | ActorChurn=False | ActorPort.Sync=False | ActorChurn=False | | ActorChurn.Timer=Start | <--------------------- | | +------------------------+ +------------------+ | ^ | | ActorChurn.Timer=Expired | | ActorPort.Sync=True | | | +-----------------+ | | | ACTOR_CHURN | | | |=================| | +--------------> | ActorChurn=True | ------------+ | | +-----------------+ Similar for the Partner-churn-detection. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: Verify RX LACPDU has proper dest mac-addrMahesh Bandewar2015-02-24
| | | | | | | | | | | | | | | | | | | | | | | | The 802.1AX standard states: "The DA in LACPDUs is the Slow_Protocols_Multicast address." This patch enforces that and drops LACPDUs with destination MAC addresses other than Slow_Protocols_Multicast address Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: simple code refactorMahesh Bandewar2015-02-20
|/ | | | | | | | Remove duplicate code. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/bonding: Fix potential bad memory access during bonding eventsMoni Shoua2015-02-09
| | | | | | | | | | | | | | | | When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/bonding: Notify state change on slavesMoni Shoua2015-02-04
| | | | | | | | | Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/bonding: Move slave state changes to a helper functionMoni Shoua2015-02-04
| | | | | | | | | | | Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: handle NETIF_F_HW_SWITCH_OFFLOAD flag and add ↵Roopa Prabhu2015-02-02
| | | | | | | | | | | | | | | | ndo_bridge_setlink/dellink handlers We want bond to pick up the offload flag if any of its slaves have it. NETIF_F_HW_SWITCH_OFFLOAD flag is added to the mask, so that netdev_increment_features does not ignore it. This also adds ndo_bridge_setlink and ndo_bridge_dellink handlers. These currently point to the default handlers provided by the switchdev api. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: cleanup and remove dead codeJonathan Toppins2015-01-27
| | | | | | | | | | | | fix sparse warning about non-static function drivers/net/bonding/bond_main.c:3737:5: warning: symbol 'bond_3ad_xor_xmit' was not declared. Should it be static? Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: fix LACP PDU not sent on slave port sometimesSatish Ashok2015-01-27
| | | | | | | | | | | | | | When a slave is added to a bond and it is not in full duplex mode, AD_PORT_LACP_ENABLED flag is cleared, due to this LACP PDU is not sent on slave. When the duplex is changed to full, the flag needs to be set to send LACP PDU. Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: fix incorrect lacp mux state when agg not activeWilson Kok2015-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to fix the following problems when an actor or partner's aggregator is not active: 1. a slave's lacp port state is marked as AD_STATE_SYNCHRONIZATION even if it is attached to an inactive aggregator. LACP advertises this state to the partner, making the partner think he can move into COLLECTING_DISTRIBUTING state even though this link will not pass traffic on the local side 2. a slave goes into COLLECTING_DISTRIBUTING state without checking if the aggregator is actually active 3. when in COLLECTING_DISTRIBUTING state, the partner parameters may change, e.g. the partner_oper_port_state.SYNCHRONIZATION. The local mux machine is not reacting to the change and continue to keep the slave and bond up 4. When bond slave leaves an inactive aggregator and joins an active aggregator, the actor oper port state need to update to SYNC state. v2: * fix style issues in bond_3ad.c Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: fix bond_open() don't always set slave active flagWilson Kok2015-01-27
| | | | | | | | | | | | | | | Mode 802.3ad, fix incorrect bond slave active state when slave is not in active aggregator. During bond_open(), the bonding driver always sets the slave active flag to true if the bond is not in active-backup, alb, or tlb modes. Bonding should let the aggregator selection logic set the active flag when in 802.3ad mode. Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: update bond carrier state when min_links option changesJonathan Toppins2015-01-27
| | | | | | | Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: handle more gso typesEric Dumazet2015-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 5a7baa78851b ("bonding: Advertize vxlan offload features when supported"), Or Gerlitz added support conditional vxlan offload. In this patch I also add support for all kind of tunnels, but we allow a bonding device to not require segmentation, as it is always better to make this segmentation at the very last stage, if a particular slave device requires it. Tested: Setup a GRE tunnel, on a physical NIC not having tx-gre-segmentation. Results on bnx2x are even better, as we no longer have to segment in software. ethtool -K bond0 tx-gre-segmentation off super_netperf 50 --google-pacing-rate 30000000 -H 10.7.8.152 -l 15 7538.32 ethtool -K bond0 tx-gre-segmentation on super_netperf 50 --google-pacing-rate 30000000 -H 10.7.8.152 -l 15 10200.5 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: cleanup bond_opts arrayJonathan Toppins2015-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the empty array element initializer and size the array with BOND_OPT_LAST so the compiler will complain if more elements are in there than should be. An interesting unwanted side effect of this initializer is that if one inserts new options into the middle of the array then this initializer will zero out the option that equals BOND_OPT_TLB_DYNAMIC_LB+1. Example: Extend the OPTS enum: enum { ... BOND_OPT_TLB_DYNAMIC_LB, BOND_OPT_LACP_NEW1, BOND_OPT_LAST }; Now insert into bond_opts array: static const struct bond_option bond_opts[] = { ... [BOND_OPT_LACP_RATE] = { .... unchanged stuff .... }, [BOND_OPT_LACP_NEW1] = { ... new stuff ... }, ... [BOND_OPT_TLB_DYNAMIC_LB] = { .... unchanged stuff ....}, { } // MARK A }; Since BOND_OPT_LACP_NEW1 = BOND_OPT_TLB_DYNAMIC_LB+1, the last initializer (MARK A) will overwrite the contents of BOND_OPT_LACP_NEW1 and can be easily viewed with the crash utility. Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: change error message to debug message in __bond_release_one()Wengang Wang2014-12-27
| | | | | | | | | | | | | In __bond_release_one(), when the interface is not a slave or not a slave of "this" master, it log error message. The message actually should be a debug message matching what bond_enslave() does. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-12-10
|\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
| * bond: Check length of IFLA_BOND_ARP_IP_TARGET attributesThomas Graf2014-11-29
| | | | | | | | | | | | | | | | | | Fixes: 7f28fa10 ("bonding: add arp_ip_target netlink support") Reported-by: John Fastabend <john.fastabend@gmail.com> Cc: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-11-21
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ieee802154/fakehard.c A bug fix went into 'net' for ieee802154/fakehard.c, which is removed in 'net-next'. Add build fix into the merge from Stephen Rothwell in openvswitch, the logging macros take a new initial 'log' argument, a new call was added in 'net' so when we merge that in here we have to explicitly add the new 'log' arg to it else the build fails. Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix curr_active_slave/carrier with loadbalance arp monitoringNikolay Aleksandrov2014-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") we can have a stale bond carrier state and stale curr_active_slave when using arp monitoring in loadbalance modes. The reason is that in bond_loadbalance_arp_mon() we can't have do_failover == true but slave_state_changed == false, whenever do_failover is true then slave_state_changed is also true. Then the following piece from bond_loadbalance_arp_mon(): if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) bond_update_slave_arr(bond, NULL); } else if (do_failover) { block_netpoll_tx(); bond_select_active_slave(bond); unblock_netpoll_tx(); } will execute only the first branch, always and regardless of do_failover. Since these two events aren't related in such way, we need to decouple and consider them separately. For example this issue could lead to the following result: Bonding Mode: load balancing (round-robin) *MII Status: down* MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 100 ARP IP target/s (n.n.n.n form): 192.168.9.2 Slave Interface: ens12 *MII Status: up* Speed: 10000 Mbps Duplex: full Link Failure Count: 2 Permanent HW addr: 00:0f:53:01:42:2c Slave queue ID: 0 Slave Interface: eth1 *MII Status: up* Speed: Unknown Duplex: Unknown Link Failure Count: 70 Permanent HW addr: 52:54:00:2f:0f:8e Slave queue ID: 0 Since some interfaces are up, then the status of the bond should also be up, but it will never change unless something invokes bond_set_carrier() (i.e. enslave, bond_select_active_slave etc). Now, if I force the calling of bond_select_active_slave via for example changing primary_reselect (it can change in any mode), then the MII status goes to "up" because it calls bond_select_active_slave() which should've been done from bond_loadbalance_arp_mon() itself. CC: Veaceslav Falico <vfalico@gmail.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> Fixes: 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | vlan: rename __vlan_put_tag to vlan_insert_tag_set_protoJiri Pirko2014-11-21
| | | | | | | | | | | | | | | | | | Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | vlan: kill vlan_put_tag helperJiri Pirko2014-11-21
| | | | | | | | | | | | | | | | Since both tx and rx paths work with skb->vlan_tci, there's no need for this function anymore. Switch users directly to __vlan_hwaccel_put_tag. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: Introduce 4 AD link speed to fix agg_bandwidthJianhua Xie2014-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds [2.5|20|40|56] Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: change AD_LINK_SPEED_BITMASK to enum to suport more speedJianhua Xie2014-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port Key was determined as 16 bits according to the link speed, duplex and user key (which is yet not supported). In the old speed field, 5 bits are for speed [1|10|100|1000|10000]Mbps as below: -------------------------------------------------------------- Port key :| User key | Speed | Duplex| -------------------------------------------------------------- 16 6 1 0 This patch keeps the old layout, but changes AD_LINK_SPEED_BITMASK from bit type to an enum type. In this way, the speed field can expand speed type from 5 to 32. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: generic dev_disable_lro() stacked device handlingMichal Kubeček2014-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Large receive offloading is known to cause problems if received packets are passed to other host. Therefore the kernel disables it by calling dev_disable_lro() whenever a network device is enslaved in a bridge or forwarding is enabled for it (or globally). For virtual devices we need to disable LRO on the underlying physical device (which is actually receiving the packets). Current dev_disable_lro() code handles this propagation for a vlan (including 802.1ad nested vlan), macvlan or a vlan on top of a macvlan. It doesn't handle other stacked devices and their combinations, in particular propagation from a bond to its slaves which often causes problems in virtualization setups. As we now have generic data structures describing the upper-lower device relationship, dev_disable_lro() can be generalized to disable LRO also for all lower devices (if any) once it is disabled for the device itself. For bonding and teaming devices, it is necessary to disable LRO not only on current slaves at the moment when dev_disable_lro() is called but also on any slave (port) added later. v2: use lower device links for all devices (including vlan and macvlan) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Move bonding headers under include/netDavid S. Miller2014-11-10
| | | | | | | | | | | | | | This ways drivers like cxgb4 don't need to do ugly relative includes. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: add bond_tx_drop() helperEric Dumazet2014-10-31
|/ | | | | | | | | | | | | | | | | | Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-10-08
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Most notable changes in here: 1) By far the biggest accomplishment, thanks to a large range of contributors, is the addition of multi-send for transmit. This is the result of discussions back in Chicago, and the hard work of several individuals. Now, when the ->ndo_start_xmit() method of a driver sees skb->xmit_more as true, it can choose to defer the doorbell telling the driver to start processing the new TX queue entires. skb->xmit_more means that the generic networking is guaranteed to call the driver immediately with another SKB to send. There is logic added to the qdisc layer to dequeue multiple packets at a time, and the handling mis-predicted offloads in software is now done with no locks held. Finally, pktgen is extended to have a "burst" parameter that can be used to test a multi-send implementation. Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4, virtio_net Adding support is almost trivial, so export more drivers to support this optimization soon. I want to thank, in no particular or implied order, Jesper Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann, David Tat, Hannes Frederic Sowa, and Rusty Russell. 2) PTP and timestamping support in bnx2x, from Michal Kalderon. 3) Allow adjusting the rx_copybreak threshold for a driver via ethtool, and add rx_copybreak support to enic driver. From Govindarajulu Varadarajan. 4) Significant enhancements to the generic PHY layer and the bcm7xxx driver in particular (EEE support, auto power down, etc.) from Florian Fainelli. 5) Allow raw buffers to be used for flow dissection, allowing drivers to determine the optimal "linear pull" size for devices that DMA into pools of pages. The objective is to get exactly the necessary amount of headers into the linear SKB area pre-pulled, but no more. The new interface drivers use is eth_get_headlen(). From WANG Cong, with driver conversions (several had their own by-hand duplicated implementations) by Alexander Duyck and Eric Dumazet. 6) Support checksumming more smoothly and efficiently for encapsulations, and add "foo over UDP" facility. From Tom Herbert. 7) Add Broadcom SF2 switch driver to DSA layer, from Florian Fainelli. 8) eBPF now can load programs via a system call and has an extensive testsuite. Alexei Starovoitov and Daniel Borkmann. 9) Major overhaul of the packet scheduler to use RCU in several major areas such as the classifiers and rate estimators. From John Fastabend. 10) Add driver for Intel FM10000 Ethernet Switch, from Alexander Duyck. 11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric Dumazet. 12) Add Datacenter TCP congestion control algorithm support, From Florian Westphal. 13) Reorganize sk_buff so that __copy_skb_header() is significantly faster. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits) netlabel: directly return netlbl_unlabel_genl_init() net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers net: description of dma_cookie cause make xmldocs warning cxgb4: clean up a type issue cxgb4: potential shift wrapping bug i40e: skb->xmit_more support net: fs_enet: Add NAPI TX net: fs_enet: Remove non NAPI RX r8169:add support for RTL8168EP net_sched: copy exts->type in tcf_exts_change() wimax: convert printk to pr_foo() af_unix: remove 0 assignment on static ipv6: Do not warn for informational ICMP messages, regardless of type. Update Intel Ethernet Driver maintainers list bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING tipc: fix bug in multicast congestion handling net: better IFF_XMIT_DST_RELEASE support net/mlx4_en: remove NETDEV_TX_BUSY 3c59x: fix bad split of cpu_to_le32(pci_map_single()) net: bcmgenet: fix Tx ring priority programming ...
| * net: better IFF_XMIT_DST_RELEASE supportEric Dumazet2014-10-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: Simplify the xmit function for modes that use xmit_hashMahesh Bandewar2014-10-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: display xmit_hash_policy for non-dynamic-tlb modeMahesh Bandewar2014-10-06
| | | | | | | | | | | | | | | | | | | | It's a trivial fix to display xmit_hash_policy for this new TLB mode since it uses transmit-hash-poilicy as part of bonding-master info (/proc/net/bonding/<bonding-interface). Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: make global bonding stats more reliableAndy Gospodarek2014-09-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the code stands today, bonding stats are based simply on the stats from the member interfaces. If a member was to be removed from a bond, the stats would instantly drop. This would be confusing to an admin would would suddonly see interface stats drop while traffic is still flowing. In addition to preventing the stats drops mentioned above, new members will now be added to the bond and only traffic received after the member was added to the bond will be counted as part of bonding stats. Bonding counters will also be updated when any slaves are dropped to make sure the reported stats are reliable. v2: Changes suggested by Nik to properly allocate/free stats memory. v3: Properly destroy workqueue and fix netlink configuration path. v4: Moved cached stats into bonding and slave structs as there does not seem to be a complexity/performance benefit to using alloc'd memory vs in-struct memory. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-09-23
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: remove the unnecessary notes for bond_xmit_broadcast()dingtianhong2014-09-22
| | | | | | | | | | | | | | | Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: slight optimization for bond_xmit_roundrobin()dingtianhong2014-09-22
| | | | | | | | | | | | | | | | | | | | | | | | When the slave is the curr_active_slave, no need to check whether the slave is active or not, it is always active. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: consolidate ASSERT_RTNL()s and remove the unnecessaryNikolay Aleksandrov2014-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consolidate the calls to ASSERT_RTNL() before bond_select_active_slave() inside bond_select_active_slave() itself and remove the ASSERT_RTNL() from bond_hw_addr_swap() as it's not exported and its only caller - bond_change_active_slave() already has an ASSERT_RTNL(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: trivial: style and comment fixesNikolay Aleksandrov2014-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: consolidate the two rlb_next_rx_slave functions into oneNikolay Aleksandrov2014-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __rlb_next_rx_slave() is a copy of rlb_next_rx_slave() with the difference that it uses rcu primitives to walk the slave list. We don't need the two functions and can make rlb_next_rx_slave() a wrapper for callers which hold RTNL. So add a comment and ASSERT_RTNL() to make sure what is intended. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bonding: adjust locking commentsNikolay Aleksandrov2014-09-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now that locks have been removed, remove some unnecessary comments and adjust others to reflect reality. Also add a comment to "mode_lock" to describe its current users and give a brief summary why they need it. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-23 16:18:43 -0500