aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x_link.c
Commit message (Collapse)AuthorAge
* bnx2x: Reset 8073 phy during common initYaniv Rosner2010-11-01
| | | | | | | | | Resetting 8073 during common init is required on boards in which the 8073 reset pin is not asserted by default. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Do not enable CL37 BAM unless it is explicitly enabledYaniv Rosner2010-11-01
| | | | | | | | | | Enabling CL37 BAM on BCM8073 by default may lead to link issues since not all switches support it. So enable CL37 BAM only if explicitly selected. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix resetting BCM8726 PHY during common initYaniv Rosner2010-11-01
| | | | | | | | | On BCM8726 based designs, the ports are swapped, hence the reset needs to be asserted through port0 and not port1. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Clear latch indication on link resetYaniv Rosner2010-11-01
| | | | | | | | | | When using latch indication for link change notification, need to clear it when port is unloaded, otherwise it might generate false indication on next load. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix port selection in case of E2Yaniv Rosner2010-11-01
| | | | | | | | | | On E2 flavor, dual-port mode, the port argument used for some functions is needed as the global port number rather than the port per path. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix waiting for reset complete on BCM848x3 PHYsYaniv Rosner2010-11-01
| | | | | | | | | BCM848x3 requires additional of 50ms after reset done indication, instead of fixed time of 200ms Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Restore appropriate delay during BMAC resetYaniv Rosner2010-11-01
| | | | | | | | Fix delay during BMAC reset from 10usec to 1ms. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: make local function static and remove dead codestephen hemminger2010-10-24
| | | | | | | | Make many functions that are only used in one file static. Remove dead code for override_led_value. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add 57712 supportDmitry Kravkov2010-10-06
| | | | | | | | 57712 HW supported with same set of features as for 57710/57711 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x, cnic, bnx2i: use new FW/HSIDmitry Kravkov2010-10-06
| | | | | | | | | | | | | | | | This is the new FW HSI blob and the relevant definitions without logic changes. It also included code adaptation for new HSI. New features are not enabled. New FW/HSI includes: - Support for 57712 HW - Future support for VF (not used) - Improvements in FW interrupts scheme - FW FCoE hooks (stubs for future usage) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Change LED scheme for dual-mediaYaniv Rosner2010-09-07
| | | | | | | | Change LED scheme for dual-media Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Add dual-media changesYaniv Rosner2010-09-07
| | | | | | | | Add required changes in order to support dual-media boards. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Organize PHY functionsYaniv Rosner2010-09-07
| | | | | | | | Group all PHY specific functions together to have an organized code Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Apply logic changes for the new schemeYaniv Rosner2010-09-07
| | | | | | | | | | | | | | | | | | | | Make the needed changes for the new scheme especially around PHY initialization, and link detection. - The get_emac_base function was changed to enable setting different MAC access setting for each PHY based of external configuration. - As a part of the dual-media preparation, the save_spirom_version was modified to accept a PHY specific version address to be saved in the shmem. This will enable to save more than single spirom version in different locations. - The test_link function was changed also as a preparation for the dual-media upcoming changes - Duplicate initialization logic was removed from the link_setting_status and link_initialize functions Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Move common function into aggregated functionYaniv Rosner2010-09-07
| | | | | | | | Move all PHY specific logic from bnx2x_main into bnx2x_link. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Adjust flow-control with the new schemeYaniv Rosner2010-09-07
| | | | | | | | Flow control implementation is split to be done in each PHY function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Adjust alignment of split PHY functionsYaniv Rosner2010-09-07
| | | | | | | | | | In previous patch, common PHY functions were split in simple way to allow easy diff. This patch comes to align code in the new functions. In addition, the non-production BCM8072 PHY was removed. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Split PHY functionsYaniv Rosner2010-09-07
| | | | | | | | | | | | | | | Move the code into PHY oriented functions, and for that a new structure is defines for each PHY which contain PHY properties and its own functions. This also enables to encapsulate all PHY specific operations into the PHY functions. During initialization, the PHYs will be probed by the "bnx2x_phy_probe" function to detect which PHYs exist on-board, and configure them accordingly. Note that the ext_phy_reset implementation was incorporated in the ext_phy_init since it is actually part of the PHY initialization procedure. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Unify PHY attributesYaniv Rosner2010-09-07
| | | | | | | | | | Start building the infrastructure for dual media by adding new component of PHY which will be used all along the function. Modify function to work with this component instead of the link_params. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Change BCM848xx LED configurationYaniv Rosner2010-09-01
| | | | | | | | | Change 848xx LED configuration according to the new microcode (Boards were shipped with only with the new microcode) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Remove unneeded setting of XAUI low power to BCM8727Yaniv Rosner2010-09-01
| | | | | | | | | Remove unneeded setting of XAUI low power to BCM8727. This was required only in older microcode which is not in the field. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Change BCM848xx configuration according to IEEEYaniv Rosner2010-09-01
| | | | | | | | | | Change BCM848xx behavior to fit IEEE such that setting 10Mb/100Mb will use force speed, and setting 1Gb/10Gb will use auto-negotiation with the specific speed advertised Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix potential link issue In BCM8727 based boardsYaniv Rosner2010-09-01
| | | | | | | | | | In BCM8727 based boards, setting default 10G link speed after link was set to 1G may lead to link down issue. The problem was setting the right value, but to the wrong registers Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fix potential link issue of BCM8073/BCM8727Yaniv Rosner2010-09-01
| | | | | | | | | Fix potential link issue caused by insufficient delay time during SPIROM load of BCM8073/BCM8727 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/bnx2x: Adjust confusing if indentationJulia Lawall2010-08-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Create separate folder for bnx2x driverDmitry Kravkov2010-07-27
This commit includes files movement to newly created folder using git-mv command and fixes references in cnic and bnx2x code to each other. files moved using following: #!/bin/bash mkdir drivers/net/bnx2x/ list=$(cd drivers/net/ && ls bnx2x*.[ch]) for f in $list; do git mv -f drivers/net/$f drivers/net/bnx2x/$f done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-24 01:46:13 -0500